In calculus, Taylor's theorem gives an approximation of a -times differentiable function around a given point by a polynomial of degree , called the -th-order Taylor polynomial. For a smooth function, the Taylor polynomial is the truncation at the order of the Taylor series of the function. The first-order Taylor polynomial is the linear approximation of the function, and the second-order Taylor polynomial is often referred to as the quadratic approximation.[1] There are several versions of Taylor's theorem, some giving explicit estimates of the approximation error of the function by its Taylor polynomial.
Taylor's theorem is named after the mathematician Brook Taylor, who stated a version of it in 1715,[2] although an earlier version of the result was already mentioned in 1671 by James Gregory.[3]
is the linear approximation of for x near the point a, whose graph is the tangent line to the graph at x = a. The error in the approximation is:
As x tends to a, this error goes to zero much faster than , making a useful approximation.
For a better approximation to , we can fit a quadratic polynomial instead of a linear function:
Instead of just matching one derivative of at , this polynomial has the same first and second derivatives, as is evident upon differentiation.
Taylor's theorem ensures that the quadratic approximation is, in a sufficiently small neighborhood of , more accurate than the linear approximation. Specifically,
Here the error in the approximation is
which, given the limiting behavior of , goes to zero faster than as x tends to a.
Similarly, we might get still better approximations to f if we use polynomials of higher degree, since then we can match even more derivatives with f at the selected base point.
In general, the error in approximating a function by a polynomial of degree k will go to zero much faster than as x tends to a. However, there are functions, even infinitely differentiable ones, for which increasing the degree of the approximating polynomial does not increase the accuracy of approximation: we say such a function fails to be analytic at x = a: it is not (locally) determined by its derivatives at this point.
Taylor's theorem is of asymptotic nature: it only tells us that the error in an approximation by a -th order Taylor polynomial Pk tends to zero faster than any nonzero -th degree polynomial as . It does not tell us how large the error is in any concrete neighborhood of the center of expansion, but for this purpose there are explicit formulas for the remainder term (given below) which are valid under some additional regularity assumptions on f. These enhanced versions of Taylor's theorem typically lead to uniform estimates for the approximation error in a small neighborhood of the center of expansion, but the estimates do not necessarily hold for neighborhoods which are too large, even if the function f is analytic. In that situation one may have to select several Taylor polynomials with different centers of expansion to have reliable Taylor-approximations of the original function (see animation on the right.)
There are several ways we might use the remainder term:
Estimate the error for a polynomial Pk(x) of degree k estimating on a given interval (a – r, a + r). (Given the interval and degree, we find the error.)
Find the smallest degree k for which the polynomial Pk(x) approximates to within a given error tolerance on a given interval (a − r, a + r) . (Given the interval and error tolerance, we find the degree.)
Find the largest interval (a − r, a + r) on which Pk(x) approximates to within a given error tolerance. (Given the degree and error tolerance, we find the interval.)
Taylor's theorem in one real variable
Statement of the theorem
The precise statement of the most basic version of Taylor's theorem is as follows:
Taylor's theorem[4][5][6] — Let k ≥ 1 be an integer and let the functionf : R → R be k times differentiable at the point a ∈ R. Then there exists a function hk : R → R such that
and
This is called the Peano form of the remainder.
The polynomial appearing in Taylor's theorem is the -th order Taylor polynomial
of the function f at the point a. The Taylor polynomial is the unique "asymptotic best fit" polynomial in the sense that if there exists a function hk : R → R and a -th order polynomial p such that
then p = Pk. Taylor's theorem describes the asymptotic behavior of the remainder term
which is the approximation error when approximating f with its Taylor polynomial. Using the little-o notation, the statement in Taylor's theorem reads as
Explicit formulas for the remainder
Under stronger regularity assumptions on f there are several precise formulas for the remainder term Rk of the Taylor polynomial, the most common ones being the following.
for some real number between and . This is the Lagrange form[8] of the remainder.
Similarly,
for some real number between and . This is the Cauchy form[9] of the remainder.
Both can be thought of as specific cases of the following result: Consider
for some real number between and . This is the Schlömilch form of the remainder (sometimes called the Schlömilch-Roché). The choice is the Lagrange form, whilst the choice is the Cauchy form.
These refinements of Taylor's theorem are usually proved using the mean value theorem, whence the name. Additionally, notice that this is precisely the mean value theorem when . Also other similar expressions can be found. For example, if G(t) is continuous on the closed interval and differentiable with a non-vanishing derivative on the open interval between and , then
for some number between and . This version covers the Lagrange and Cauchy forms of the remainder as special cases, and is proved below using Cauchy's mean value theorem. The Lagrange form is obtained by taking and the Cauchy form is obtained by taking .
The statement for the integral form of the remainder is more advanced than the previous ones, and requires understanding of Lebesgue integration theory for the full generality. However, it holds also in the sense of Riemann integral provided the (k + 1)th derivative of f is continuous on the closed interval [a,x].
It is often useful in practice to be able to estimate the remainder term appearing in the Taylor approximation, rather than having an exact formula for it. Suppose that f is (k + 1)-times continuously differentiable in an interval I containing a. Suppose that there are real constants q and Q such that
throughout I. Then the remainder term satisfies the inequality[11]
if x > a, and a similar estimate if x < a. This is a simple consequence of the Lagrange form of the remainder. In particular, if
on an interval I = (a − r,a + r) with some , then
for all x∈(a − r,a + r). The second inequality is called a uniform estimate, because it holds uniformly for all x on the interval (a − r,a + r).
Example
Suppose that we wish to find the approximate value of the function on the interval while ensuring that the error in the approximation is no more than 10−5. In this example we pretend that we only know the following properties of the exponential function:
(★)
From these properties it follows that for all , and in particular, . Hence the -th order Taylor polynomial of at and its remainder term in the Lagrange form are given by
where is some number between 0 and x. Since ex is increasing by (★), we can simply use for to estimate the remainder on the subinterval . To obtain an upper bound for the remainder on , we use the property for to estimate
using the second order Taylor expansion. Then we solve for ex to deduce that
simply by maximizing the numerator and minimizing the denominator. Combining these estimates for ex we see that
so the required precision is certainly reached, when
(See factorial or compute by hand the values and .) As a conclusion, Taylor's theorem leads to the approximation
For instance, this approximation provides a decimal expression, correct up to five decimal places.
Relationship to analyticity
Taylor expansions of real analytic functions
Let I ⊂ R be an open interval. By definition, a function f : I → R is real analytic if it is locally defined by a convergent power series. This means that for every a ∈ I there exists some r > 0 and a sequence of coefficients ck ∈ R such that (a − r, a + r) ⊂ I and
This result is based on comparison with a geometric series, and the same method shows that if the power series based on a converges for some b ∈ R, it must converge uniformly on the closed interval, where . Here only the convergence of the power series is considered, and it might well be that (a − R,a + R) extends beyond the domain I of f.
The Taylor polynomials of the real analytic function f at a are simply the finite truncations
of its locally defining power series, and the corresponding remainder terms are locally given by the analytic functions
Here the functions
are also analytic, since their defining power series have the same radius of convergence as the original series. Assuming that [a − r, a + r] ⊂ I and r < R, all these series converge uniformly on (a − r, a + r). Naturally, in the case of analytic functions one can estimate the remainder term by the tail of the sequence of the derivatives f′(a) at the center of the expansion, but using complex analysis also another possibility arises, which is described below.
Taylor's theorem and convergence of Taylor series
The Taylor series of f will converge in some interval in which all its derivatives are bounded and do not grow too fast as k goes to infinity. (However, even if the Taylor series converges, it might not converge to f, as explained below; f is then said to be non-analytic.)
One might think of the Taylor series
of an infinitely many times differentiable function f : R → R as its "infinite order Taylor polynomial" at a. Now the estimates for the remainder imply that if, for any r, the derivatives of f are known to be bounded over (a − r, a + r), then for any order k and for any r > 0 there exists a constant Mk,r > 0 such that
(★★)
for every x ∈ (a − r,a + r). Sometimes the constants Mk,r can be chosen in such way that Mk,r is bounded above, for fixed r and all k. Then the Taylor series of fconverges uniformly to some analytic function
(One also gets convergence even if Mk,r is not bounded above as long as it grows slowly enough.)
The limit function Tf is by definition always analytic, but it is not necessarily equal to the original function f, even if f is infinitely differentiable. In this case, we say f is a non-analytic smooth function, for example a flat function:
for some polynomial pk of degree 2(k − 1). The function tends to zero faster than any polynomial as , so f is infinitely many times differentiable and f(k)(0) = 0 for every positive integer k. The above results all hold in this case:
The Taylor series of f converges uniformly to the zero function Tf(x) = 0, which is analytic with all coefficients equal to zero.
The function f is unequal to this Taylor series, and hence non-analytic.
For any order k ∈ N and radius r > 0 there exists Mk,r > 0 satisfying the remainder bound (★★) above.
However, as k increases for fixed r, the value of Mk,r grows more quickly than rk, and the error does not go to zero.
Let r > 0 such that the closed diskB(z, r) ∪ S(z, r) is contained in U. Then Cauchy's integral formula with a positive parametrization γ(t) = z + reit of the circle S(z, r) with gives
Here all the integrands are continuous on the circleS(z, r), which justifies differentiation under the integral sign. In particular, if f is once complex differentiable on the open set U, then it is actually infinitely many times complex differentiable on U. One also obtains the Cauchy's estimates[12]
for any z ∈ U and r > 0 such that B(z, r) ∪ S(c, r) ⊂ U. These estimates imply that the complexTaylor series
of f converges uniformly on any open disk with into some function Tf. Furthermore, using the contour integral formulas for the derivatives f(k)(c),
so any complex differentiable function f in an open set U ⊂ C is in fact complex analytic. All that is said for real analytic functions here holds also for complex analytic functions with the open interval I replaced by an open subset U ∈ C and a-centered intervals (a − r, a + r) replaced by c-centered disks B(c, r). In particular, the Taylor expansion holds in the form
where the remainder term Rk is complex analytic. Methods of complex analysis provide some powerful results regarding Taylor expansions. For example, using Cauchy's integral formula for any positively oriented Jordan curve which parametrizes the boundary of a region , one obtains expressions for the derivatives f(j)(c) as above, and modifying slightly the computation for Tf(z) = f(z), one arrives at the exact formula
The important feature here is that the quality of the approximation by a Taylor polynomial on the region is dominated by the values of the function f itself on the boundary . Similarly, applying Cauchy's estimates to the series expression for the remainder, one obtains the uniform estimates
Example
The function
is real analytic, that is, locally determined by its Taylor series. This function was plotted above to illustrate the fact that some elementary functions cannot be approximated by Taylor polynomials in neighborhoods of the center of expansion which are too large. This kind of behavior is easily understood in the framework of complex analysis. Namely, the function f extends into a meromorphic function
on the compactified complex plane. It has simple poles at and , and it is analytic elsewhere. Now its Taylor series centered at z0 converges on any disc B(z0, r) with r < |z − z0|, where the same Taylor series converges at z ∈ C. Therefore, Taylor series of f centered at 0 converges on B(0, 1) and it does not converge for any z ∈ C with |z| > 1 due to the poles at i and −i. For the same reason the Taylor series of f centered at 1 converges on and does not converge for any z ∈ C with .
If this is the case, then is the (uniquely defined) differential of f at the point a. Furthermore, then the partial derivatives of f exist at a and the differential of f at a is given by
for α ∈ Nn and x ∈ Rn. If all the -th order partial derivatives of f : Rn → R are continuous at a ∈ Rn, then by Clairaut's theorem, one can change the order of mixed derivatives at a, so the notation
for the higher order partial derivatives is justified in this situation. The same is true if all the (k − 1)-th order partial derivatives of f exist in some neighborhood of a and are differentiable at a.[13] Then we say that f is ktimes differentiable at the point a.
Taylor's theorem for multivariate functions
Using notations of the preceding section, one has the following theorem.
Multivariate version of Taylor's theorem[14] — Let f : Rn → R be a k-times continuously differentiable function at the point a ∈ Rn. Then there exist functions hα : Rn → R, where such that
The proof here is based on repeated application of L'Hôpital's rule. Note that, for each , . Hence each of the first derivatives of the numerator in vanishes at , and the same is true of the denominator. Also, since the condition that the function be times differentiable at a point requires differentiability up to order in a neighborhood of said point (this is true, because differentiability requires a function to be defined in a whole neighborhood of a point), the numerator and its derivatives are differentiable in a neighborhood of . Clearly, the denominator also satisfies said condition, and additionally, doesn't vanish unless , therefore all conditions necessary for L'Hôpital's rule are fulfilled, and its use is justified. So
where the second-to-last equality follows by the definition of the derivative at .
Alternate proof for Taylor's theorem in one real variable
Let be any real-valued continuous function to be approximated by the Taylor polynomial.
Step 1: Let and be functions. Set and to be
Step 2: Properties of and :
Similarly,
Step 3: Use Cauchy Mean Value Theorem
Let and be continuous functions on . Since so we can work with the interval . Let and be differentiable on . Assume for all .
Then there exists such that
Note: in and so
for some .
This can also be performed for :
for some .
This can be continued to .
This gives a partition in :
with
Set :
Step 4: Substitute back
By the Power Rule, repeated derivatives of , , so:
This leads to:
By rearranging, we get:
or because eventually:
Derivation for the mean value forms of the remainder
Let G be any real-valued function, continuous on the closed interval between and and differentiable with a non-vanishing derivative on the open interval between and , and define
for some on the open interval between and . Note that here the numerator is exactly the remainder of the Taylor polynomial for . Compute
plug it into (★★★) and rearrange terms to find that
This is the form of the remainder term mentioned after the actual statement of Taylor's theorem with remainder in the mean value form.
The Lagrange form of the remainder is found by choosing and the Cauchy form by choosing .
Remark. Using this method one can also recover the integral form of the remainder by choosing
but the requirements for f needed for the use of mean value theorem are too strong, if one aims to prove the claim in the case that f(k) is only absolutely continuous. However, if one uses Riemann integral instead of Lebesgue integral, the assumptions cannot be weakened.
Now we can integrate by parts and use the fundamental theorem of calculus again to see that
which is exactly Taylor's theorem with remainder in the integral form in the case . The general statement is proved using induction. Suppose that
(eq1)
Integrating the remainder term by parts we arrive at
Substituting this into the formula in (eq1) shows that if it holds for the value , it must also hold for the value . Therefore, since it holds for , it must hold for every positive integer .
Derivation for the remainder of multivariate Taylor polynomials
We prove the special case, where has continuous partial derivatives up to the order in some closed ball with center . The strategy of the proof is to apply the one-variable case of Taylor's theorem to the restriction of to the line segment adjoining and .[17] Parametrize the line segment between and by We apply the one-variable version of Taylor's theorem to the function :
Applying the chain rule for several variables gives
^Taylor, Brook (1715). Methodus Incrementorum Directa et Inversa [Direct and Reverse Methods of Incrementation] (in Latin). London. p. 21–23 (Prop. VII, Thm. 3, Cor. 2). Translated into English in Struik, D. J. (1969). A Source Book in Mathematics 1200–1800. Cambridge, Massachusetts: Harvard University Press. pp. 329–332.
^Genocchi, Angelo; Peano, Giuseppe (1884), Calcolo differenziale e principii di calcolo integrale, (N. 67, pp. XVII–XIX): Fratelli Bocca ed.{{citation}}: CS1 maint: location (link)
^This follows from iterated application of the theorem that if the partial derivatives of a function f exist in a neighborhood of a and are continuous at a, then the function is differentiable at a. See, for instance, Apostol 1974, Theorem 12.11.