This is an old revision of this page, as edited by InternetArchiveBot(talk | contribs) at 11:41, 28 April 2020(Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 11:41, 28 April 2020 by InternetArchiveBot(talk | contribs)(Rescuing 2 sources and tagging 0 as dead.) #IABot (v2.0)
SP45 is the name for a Polishdiesel locomotive. It was built for the purpose of passenger traffic.
No operating examples of this loco remain. All have been phased out or rebuilt into SU45.
History
In the early 1960s in Poland an urgent need became apparent to introduce locomotives capable of servicing passenger traffic on main and secondary rail routes. The number of steam locomotives was shrinking and electrification was far too slow to introduce electric locos on a large scale.
Prototypes
In the second half of the 1960s a few models of a new locomotive, with Co-Co bogies and electric transmission, were built at the Hipolit Cegielski Metal Works in Poznań. In general, all prototypes differed by engine-alternator combination. The final decision was to use a Fiat-licensed engine and an Alsthom-licensed alternator.
Introduction
The first locos were assigned to the Poznań railway district, and on successfully passing the necessary tests, they entered service in Warsaw. Between 1970 and 1976, a total number of 265 locomotives were produced. This type served on all main routes in Poland