Multinomial distribution
Parameters |
number of trials (integer) event probabilities () | ||
---|---|---|---|
Support |
| ||
PMF | |||
Mean | |||
Variance |
| ||
Entropy | |||
MGF | |||
CF | where | ||
PGF |
In probability theory, the multinomial distribution is a generalization of the binomial distribution. For example, it models the probability of counts for each side of a k-sided die rolled n times. For n independent trials each of which leads to a success for exactly one of k categories, with each category having a given fixed success probability, the multinomial distribution gives the probability of any particular combination of numbers of successes for the various categories.
When k is 2 and n is 1, the multinomial distribution is the Bernoulli distribution. When k is 2 and n is bigger than 1, it is the binomial distribution. When k is bigger than 2 and n is 1, it is the categorical distribution.
The Bernoulli distribution models the outcome of a single Bernoulli trial. In other words, it models whether flipping a (possibly biased) coin one time will result in either a success (obtaining a head) or failure (obtaining a tail). The binomial distribution generalizes this to the number of heads from performing n independent flips (Bernoulli trials) of the same coin. The multinomial distribution models the outcome of n experiments, where the outcome of each trial has a categorical distribution, such as rolling a k-sided dice n times.
Let k be a fixed finite number. Mathematically, we have k possible mutually exclusive outcomes, with corresponding probabilities p1, ..., pk, and n independent trials. Since the k outcomes are mutually exclusive and one must occur we have pi ≥ 0 for i = 1, ..., k and . Then if the random variables Xi indicate the number of times outcome number i is observed over the n trials, the vector X = (X1, ..., Xk) follows a multinomial distribution with parameters n and p, where p = (p1, ..., pk). While the trials are independent, their outcomes X are dependent because they must be summed to n.
In some fields such as natural language processing, categorical and multinomial distributions are synonymous and it is common to speak of a multinomial distribution when a categorical distribution is actually meant. This stems from the fact that it is sometimes convenient to express the outcome of a categorical distribution as a "1-of-K" vector (a vector with one element containing a 1 and all other elements containing a 0) rather than as an integer in the range ; in this form, a categorical distribution is equivalent to a multinomial distribution over a single trial.
Specification
Probability mass function
Suppose one does an experiment of extracting n balls of k different colors from a bag, replacing the extracted ball after each draw. Balls of the same color are equivalent. Denote the variable which is the number of extracted balls of color i (i = 1, ..., k) as Xi, and denote as pi the probability that a given extraction will be in color i. The probability mass function of this multinomial distribution is:
for non-negative integers x1, ..., xk.
The probability mass function can be expressed using the gamma function as:
This form shows its resemblance to the Dirichlet distribution, which is its conjugate prior.
Visualization
As slices of generalized Pascal's triangle
Just like one can interpret the binomial distribution as (normalized) one-dimensional (1D) slices of Pascal's triangle, so too can one interpret the multinomial distribution as 2D (triangular) slices of Pascal's pyramid, or 3D/4D/+ (pyramid-shaped) slices of higher-dimensional analogs of Pascal's triangle. This reveals an interpretation of the range[disambiguation needed] of the distribution: discretized equilaterial "pyramids" in arbitrary dimension—i.e. a simplex with a grid.[citation needed]
As polynomial coefficients
Similarly, just like one can interpret the binomial distribution as the polynomial coefficients of when expanded, one can interpret the multinomial distribution as the coefficients of when expanded. (Note that just like the binomial distribution, the coefficients must sum to 1.) This is the origin of the name "multinomial distribution".
Properties
The expected number of times the outcome i was observed over n trials is
The covariance matrix is as follows. Each diagonal entry is the variance of a binomially distributed random variable, and is therefore
The off-diagonal entries are the covariances:
for i, j distinct.
All covariances are negative because for fixed n, an increase in one component of a multinomial vector requires a decrease in another component.
When these expressions are combined into a matrix with i, j element the result is a k × k positive-semidefinite covariance matrix of rank k − 1. In the special case where k = n and where the pi are all equal, the covariance matrix is the centering matrix.
The entries of the corresponding correlation matrix are
Note that the sample size drops out of this expression.
Each of the k components separately has a binomial distribution with parameters n and pi, for the appropriate value of the subscript i.
The support of the multinomial distribution is the set
Its number of elements is
Matrix notation
In matrix notation,
and
with pT = the row vector transpose of the column vector p.
Example
Suppose that in a three-way election for a large country, candidate A received 20% of the votes, candidate B received 30% of the votes, and candidate C received 50% of the votes. If six voters are selected randomly, what is the probability that there will be exactly one supporter for candidate A, two supporters for candidate B and three supporters for candidate C in the sample?
Note: Since we’re assuming that the voting population is large, it is reasonable and permissible to think of the probabilities as unchanging once a voter is selected for the sample. Technically speaking this is sampling without replacement, so the correct distribution is the multivariate hypergeometric distribution, but the distributions converge as the population grows large.
Sampling from a multinomial distribution
First, reorder the parameters such that they are sorted in descending order (this is only to speed up computation and not strictly necessary). Now, for each trial, draw an auxiliary variable X from a uniform (0, 1) distribution. The resulting outcome is the component
{Xj = 1, Xk = 0 for k ≠ j } is one observation from the multinomial distribution with and n = 1. A sum of independent repetitions of this experiment is an observation from a multinomial distribution with n equal to the number of such repetitions.
To simulate from a multinomial distribution
Various methods may be used to simulate from a multinomial distribution. A very simple solution is to use a uniform pseudo-random number generator on (0,1). First, we divide the (0,1) interval in k subintervals equal in length to the probabilities of the k categories. Then, we generate n independent pseudo-random numbers to determine in which of the k intervals they occur and count the number of occurrences in each interval.
- Example
If we have:
Categories | 1 | 2 | 3 | 4 | 5 | 6 |
Probabilities | 0.15 | 0.20 | 0.30 | 0.16 | 0.12 | 0.07 |
Superior limits of subintervals | 0.15 | 0.35 | 0.65 | 0.81 | 0.93 | 1.00 |
Then, with a software like Excel, we may use the following recipe:
Cells : | Ai | Bi | Ci | ... | Gi |
Formulae : | Rand() | =If($Ai<0.15;1;0) | =If(And($Ai>=0.15;$Ai<0.35);1;0) | ... | =If($Ai>=0.93;1;0) |
After that, we will use functions such as SumIf to accumulate the observed results by category and to calculate the estimated covariance matrix for each simulated sample.
Another way is to use a discrete random number generator. In that case, the categories must be labeled or relabeled with numeric values.
In the two cases, the result is a multinomial distribution with k categories. This is equivalent, with a continuous random distribution, to simulate k independent standardized normal distributions, or a multinormal distribution N(0,I) having k components identically distributed and statistically independent.
Since the counts of all categories have to sum to the number of trials, the counts of the categories are always negatively correlated.[1]
Equivalence tests for multinomial distributions
The goal of equivalence testing is to establish the agreement between a theoretical multinomial distribution and observed counting frequencies. The theoretical distribution may be a fully specified multinomial distribution or a parametric family of multinomial distributions.
Let denote a theoretical multinomial distribution and let be a true underlying distribution. The distributions and are considered equivalent if for a distance and a tolerance parameter . The equivalence test problem is versus . The true underlying distribution is unknown. Instead, the counting frequencies are observed, where is a sample size. An equivalence test uses to reject . If can be rejected then the equivalence between and is shown at a given significance level. The equivalence test for Euclidean distance can be found in text book of Wellek (2010).[2] The equivalence test for the total variation distance is developed in Ostrovski (2017).[3] The exact equivalence test for the specific cumulative distance is proposed in Frey (2009).[4]
The distance between the true underlying distribution and a family of the multinomial distributions is defined by . Then the equivalence test problem is given by and . The distance is usually computed using numerical optimization. The tests for this case are developed recently in Ostrovski (2018).[5]
Related distributions
- When k = 2, the multinomial distribution is the binomial distribution.
- Categorical distribution, the distribution of each trial; for k = 2, this is the Bernoulli distribution.
- The Dirichlet distribution is the conjugate prior of the multinomial in Bayesian statistics.
- Dirichlet-multinomial distribution.
- Beta-binomial model.
- Negative multinomial distribution
- Hardy–Weinberg principle (it is a trinomial distribution with probabilities )
References
Citations
- ^ "1.7 - The Multinomial Distribution | STAT 504". onlinecourses.science.psu.edu. Retrieved 2016-09-11.
- ^ Wellek, Stefan (2010). Testing statistical hypotheses of equivalence and noninferiority. Chapman and Hall/CRC. ISBN 978-1439808184.
- ^ Ostrovski, Vladimir (May 2017). "Testing equivalence of multinomial distributions". Statistics & Probability Letters. 124: 77–82.Official web link (subscription required). Alternate, free web link.
- ^ Frey, Jesse (March 2009). "An exact multinomial test for equivalence". The Canadian Journal of Statistics. 37: 47–59.Official web link (subscription required).
- ^ Ostrovski, Vladimir (March 2018). "Testing equivalence to families of multinomial distributions with application to the independence model". Statistics & Probability Letters. 139: 61–66.Official web link (subscription required). Alternate, free web link.
Sources
- Evans, Morton; Hastings, Nicholas; Peacock, Brian (2000). Statistical Distributions (3rd ed.). New York: Wiley. pp. 134–136. ISBN 0-471-37124-6.
- Weisstein, Eric W. "Multinomial Distribution". MathWorld. Wolfram Research.