Eskimo bowline

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by GünniX (talk | contribs) at 07:41, 1 December 2016 (v1.41 - WP:WCW project (Reference list duplication)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Eskimo bowline
NamesEskimo bowline, Sitka loop
CategoryLoop
OriginAncient
Relatedbowline, sheet bend, double bowline, water bowline, spanish bowline, triple bowline, bowline on a bight, running bowline, poldo tackle, cowboy bowline
ReleasingNon-jamming
Typical usePlacing a loop which will be stretched wide open under load in the end of a rope

The Eskimo bowline is a knot that places a loop in the end of a rope. Whereas the standard bowline knot loops the working end around the standing part, the Eskimo bowline loops it around its own descending part.

The Eskimo bowline is best used in applications in which the loop will be stretched wide. In applications where the two legs of the loop are nearly parallel, a bowline is superior.

Eskimo bowline based on the method described by Geoffrey Budworth in The Illustrated Encyclopedia of Knots.[1] The tightened knot on the right takes on a trefoil crown shape.

See also

References

  1. ^ Budworth, Geoffrey (2002). The Illustrated Encyclopedia of Knots. Lyons Press. ISBN 978-1585746262.