Jump to content

Forensic chemistry

This is a good article. Click here for more information.
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Nikolajpop32 (talk | contribs) at 12:59, 27 April 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Part of a series on
Forensic science
Physiological
Social
Criminalistics
Digital forensics
Related disciplines
Related articles

Forensic chemistry is the application of chemistry and its subfield, forensic toxicology, in a legal setting. A forensic chemist can assist in the identification of unknown materials found at a crime scene.[1] Forensic specialists in this field have a wide array of different methods and instruments to help identify unknown substances. Specific methods common to the field include high-performance liquid chromatography, gas chromatography-mass spectrometry, atomic absorption spectroscopy, Fourier transform infrared spectroscopy, and thin layer chromatography. The range of different methods is important due to the destructive nature of some instruments and the number of possible unknown substances that can be found at a scene. If possible, nondestructive methods should always be attempted first to preserve evidence and to determine the best protocol for when a destructive method is used.

Along with other forensic specialists, forensic chemists commonly testify in court as expert witnesses regarding their findings. The work performed by forensic chemists is bound by a set of standards that have been proposed by various agencies and governing bodies, including the Scientific Working Group on the Analysis of Seized Drugs. In addition to the standard operating procedures proposed by the group, specific agencies have their own standards regarding the quality assurance and quality control of their results and their instruments. In order to ensure the accuracy of what they are reporting, forensic chemists routinely check and verify that their instruments are working correctly and are still able to detect and measure various quantities of different substances.

Role in investigations

Chemists were able to identify the explosive ANFO at the scene of the Oklahoma City bombing.[2]

Forensic chemists' investigations can provide directions for investigators to look in, and they can confirm or refute investigators' suspicions. In cases where an unknown material is found at the scene, the identification of the substance can tell investigators what to look for during their search. For example, during fire investigations, forensic chemists can determine if an accelerant such as gasoline or kerosene was used; if so, this suggests that the fire was intentionally set.[3] Forensic chemists can also narrow down the suspect list to people who would have access to the substance used in a crime. For example, in explosive investigations, the identification of RDX or C-4 would indicate a military connection as those substances are military grade explosives.[4] On the other hand, the identification of TNT would create a wider suspect list, since it is used in both the military and by demolition companies.[4] During poisoning investigations, the detection of specific poisons can give detectives an idea of what to look for when they are interviewing potential suspects. For example, a death caused by ricin would tell investigators to look for the precursors to ricin, the seeds of the castor oil plant, while a death from strychnine would tell investigators to look for a strychnine tree or online purchases of the seeds.

Forensic chemists also help to confirm or refute investigators' suspicions in drug or alcohol cases. Since the instruments used by forensic chemists can detect substances down to a very low level, the quantity of that substance is relevant to the investigation. This can be important in crimes such as driving under the influence as there is a specific blood alcohol content cutoff where penalties begin or increase.[5] In suspected overdose cases, the quantity of the drug found in the person's system can confirm or rule out overdose as the cause of death.

History

Early history

A bottle of strychnine extract was easily obtainable in apothecaries.

Throughout history, the availability of poisons allowed individuals to commit murder with relative ease. Arsenic, nightshade, hemlock, strychnine, and curare were all historically used poisons.[6] With no method to accurately determine if a particular chemical was present, poisoners were frequently never punished for their crimes.[7] It was not until the early 19th century that chemists were able to effectively detect poisons for the first time. In 1836, one of the first major contributions to forensic chemistry was introduced by James Marsh. He created the Marsh test for arsenic detection which was subsequently used successfully in a murder trial.[8] It was also during this time that forensic toxicology began to be recognized as a distinct field. Mathieu Orfila, the "father of toxicology", made great advancements to the field during the early 19th century.[9] He helped develop tests that could determine the presence of blood and was one of the first to use microscopy in the analysis of blood and semen.[9] Orfila was also the first chemist to successfully classify different chemicals into categories such as corrosives, narcotics, and astringents.[7]

The next advancement in the detection of poisons came in 1850 when a valid method for detecting vegetable alkaloids in human tissue was created by chemist Jean Stas.[10] Stas' method was quickly adopted and used successfully in court to convict Count Hippolyte Visart de Bocarmé of murdering his brother-in-law by nicotine poisoning.[10] Stas was able to successfully isolate the alkaloid from the organs of the victim proving Count Bocarmé murdered his brother-in-law. Stas's protocol was subsequently altered to incorporate tests for caffeine, quinine, morphine, strychnine, atropine, and opium.[11]

The wide range of instrumentation for forensic chemical analysis also started during this time period. In 1859, chemist Robert Bunsen and physicist Gustav Kirchhoff invented the first spectroscope.[12] Their experiments with spectroscopy showed that specific substances created a unique spectrum when exposed to a specific wavelength of light. Using spectroscopy, the two scientists were able to identify substances based on their spectrum, providing a method of identification for unknown materials.[12] Another crucial advancement in the field was invented in 1906 by botanist Mikhail Tsvet: he developed paper chromatography, an early predecessor to thin layer chromatography, in order to separate and examine the plant proteins that make up chlorophyll.[11] The ability to separate mixtures into their individual components allows forensic chemists to examine the parts of an unknown material against a database of known products. By matching the retention factors for the separated components with known values, materials can be identified. Over time, chromatography techniques have become more sophisticated with the introduction of liquid and gas chromatography.

Modernization

A GC-MS unit with doors open. The gas chromatograph is on the right and the mass spectrometer is on the left.

Modern forensic chemists rely on numerous instruments in order to identify unknown materials found at a crime scene. The 20th century saw many advancements in technology that allowed chemists to detect smaller amounts of material more accurately. The first major advancement in this century came during 1930s with the invention of a spectrometer that could measure the signal produced with infrared (IR) light. Early IR spectrometers used a monochromator and could only measure light absorption in a very narrow wavelength band. It was not until the coupling of an interferometer with an IR spectrometer in 1949 by Peter Fellgett that the complete infrared spectrum could be measured at once.[13]: 202  Fellgett also used the Fourier transform, a mathematical method that can break down a signal into the individual frequencies that make it up, to make sense of the enormous amount of data received from the complete infrared analysis of a material.[13] Since then, Fourier transform infrared spectroscopy (FTIR) instruments have become critical in the forensic analysis of unknown material because they are nondestructive and extremely quick to use. Spectroscopy was further advanced in 1955 with the invention of the modern atomic absorption (AA) spectrophotometer by Alan Walsh.[14] AA analysis can detect specific elements that make up a sample along with their concentrations, allowing for the easy detection of heavy metals such as arsenic and cadmium.

Advancements in the field of chromatography arrived in 1953 with the invention of the gas chromatograph by Anthony T. James and Archer John Porter Martin, allowing for the separation of volatile liquid mixtures with components which have similar boiling points. Nonvolatile liquid mixtures could be separated with liquid chromatography; however substances with similar retention times could not be resolved until the invention of high-performance liquid chromatography (HPLC) by Csaba Horváth in 1970. Modern HPLC instruments are capable of detecting and resolving substances whose concentrations are as low as parts per trillion.[15]

One of the most important advancements in forensic chemistry came in 1955 with the invention of the gas chromatography-mass spectrometry (GC-MS) by Fred McLafferty and Roland Gohlke.[16] The coupling of a gas chromatograph with a mass spectrometer allowed for the identification of a wide range of substances.[16] GC-MS analysis is widely considered the "gold standard" for forensic analysis due to its sensitivity and versatility along with its ability to quantify the amount of substance present.[17]

Methods

Forensic chemists rely on a multitude of instruments in order to identify unknown substances found at a scene.[18] Different methods can be used to determine the identity of the same substance, and it is up to the examiner to determine which method will produce the best results. Certain aspects that forensic chemists must be aware of when performing an examination are the length of time a specific instrument will take to examine a substance and the destructive nature of that instrument. If possible, nondestructive methods should always be attempted first in order to preserve the evidence for further examination.[19] Nondestructive techniques can also be used to narrow down the possibilities, making it more likely that the correct method will be used the first time when a destructive method is used.[19]

Spectroscopy

ATR FTIR spectrum for hexane showing percent transmittance (%T) versus wavenumber (cm−1).

The two main standalone spectroscopy techniques for forensic chemistry are FTIR and AA spectroscopy. FTIR is a nondestructive process that uses infrared light to identify a substance. The attenuated total reflectance sampling technique eliminates the need for substances to be prepared before analysis.[20] The combination of nondestructiveness and zero preparation makes ATR FTIR analysis a quick and easy first step in the analysis of unknown substances. To facilitate the positive identification of the substance, FTIR instruments are loaded with databases that can be searched for known spectra that match the unknown's spectra. However, FTIR analysis of mixtures, while not impossible, presents specific difficulties due to the cumulative nature of the response. When analyzing an unknown that contains more than one substance, the resulting spectra will be a combination of the individual spectra of each component.[21] While common mixtures have known spectra on file, novel mixtures can be difficult to resolve, making FTIR an unacceptable means of identification. However, the instrument can be used to determine the general chemical structures present, allowing forensic chemists to determine the best method for analysis with other instruments. For example, a stretch of alkyl groups will result in a peak between 2,950 and 2,850 wavenumbers (cm−1).[22]

Atomic absorption spectroscopy (AAS) is a destructive technique that is able to determine the elements that make up the analyzed sample. AAS performs this analysis by subjecting the sample to an extremely high heat source, breaking the atomic bonds of the substance, leaving free atoms. Once atomized, radiation in the form of light is passed through the sample forcing the atoms to jump to a higher energy state.[23] Forensic chemists can test for each element by using a corresponding wavelength of light that forces that element's atoms to a higher energy state during the analysis.[24] For this reason, and due to the destructive nature of this method, AAS should be used as a confirmatory technique after earlier, preliminary, tests have indicated the presence of a specific element in the sample. The concentration of the element in the sample is proportional to the amount of light absorbed when compared to a blank sample.[25] AAS is useful in cases of suspected heavy metal poisoning such as with arsenic, lead, mercury, and cadmium. Determining the concentration of the substance in the sample can determine if heavy metals were the cause of death.

Chromatography

HPLC readout of an Excedrin tablet. Peaks from left to right are acetaminophen, aspirin, and caffeine.

Spectroscopy techniques are useful when the sample being tested is pure, or a very common mixture. When an unknown mixture is being analyzed it must be broken down into its individual parts. Chromatography techniques can be used to break apart mixtures into their components allowing for each part to be analyzed separately. Thin layer chromatography (TLC) is a quick alternative to more complex chromatography methods. TLC can be used to analyze inks and dyes by extracting the individual components.[26] This can be used to investigate notes or fibers left at the scene since each company's product is slightly different and those differences can be seen with TLC. The only limiting factor with TLC analysis is the necessity for the components to be soluble in whatever solution is used to carry the components up the analysis plate.[26] This solution is called the mobile phase. The forensic chemist can compare unknowns with known standards by looking at the distance each component traveled. This distance, when compared to the starting point, is known as the retention factor (Rf) for each extracted component. If each Rf value matches a known sample, that is an indication of the unknown's identity.

High-performance liquid chromatography can be used to extract individual components from a mixture dissolved in a solution. HPLC is used for nonvolatile mixtures that would not be suitable for gas chromatography. This is useful in drug analysis where the pharmaceutical is a combination drug since the components would separate, or elute, at different times allowing for the verification of each component. The eluates from the HPLC column are then fed into various detectors that can further analyze the substances. The most common type of detector is an ultraviolet-visible spectrometer while the most discerning detector is a mass spectrometer.[27] The choice of which detector a lab uses depends on its funding and the precision needed for the type of work it performs.

Gas chromatography (GC) performs the same function as liquid chromatography, but it is used for volatile mixtures. In forensic chemistry, the most common GC instruments use mass spectrometry as their detector.[1] GC-MS can be used in investigations of arson, poisoning, and explosions in order to determine exactly what was used. In theory, GC-MS instruments can detect substances whose concentrations are in the femtogram (10−15) range.[28] However, in practice, due to signal-to-noise ratios and other limiting factors, such as the age of the individual parts of the instrument, the practical detection limit for GC-MS is in the picogram (10−12) range.[29] GC-MS is also capable of quantifying substances which can be used by forensic chemists to determine the effect the substance would have on an individual. GC-MS instruments need around 1,000 times more of the substance to quantify the amount than they need simply to detect it; the limit of quantification is typically in the nanogram (10−9) range.[29]

Forensic toxicology

Main article: Forensic toxicology

Forensic toxicology is the study of the pharmacodynamics, or what a substance does to the body, and pharmacokinetics, or what the body does to the substance. In order to accurately determine the effect a particular drug has on the human body, forensic toxicologists must be aware of various levels of tolerance that an individual can build up as well as the therapeutic index for various pharmaceuticals. Toxicologists are tasked with determining whether any toxin found in a body was the cause of an incident, contributed to the incident, or was at too low a level to have had an effect.[30] While the determination of the specific toxin can be time consuming due to the number of different substances that can cause injury or death, certain clues can narrow down the possibilities. For example, carbon monoxide poisoning would result in bright red blood while death from hydrogen sulfide would cause the brain to have a green hue.[31][32]

Toxicologists are also aware of the different metabolites that a specific drug could break down into inside the body. For example, a toxicologist can confirm that a person took heroin by the presence in a sample of 6-monoacetylmorphine, which only comes from the breakdown of heroin.[33] The constant creation of new drugs, both legal and illicit, forces toxicologists to keep themselves apprised of new research and methods to test for these novel substances. The stream of new formulations means that a negative test result does not necessarily rule out drugs. In order to avoid detection, illicit drug manufacturers frequently change the chemicals' structure slightly. These compounds still have the same effect on the body but are not picked up with an instrumentation database search.[34] As new compounds are discovered, tests are created and entered into the instrument's library. For this reason, toxicologists study the different symptoms specific drug classes can have on a person. Even if the test comes back negative, symptoms can present cause for a further search. Substances, and their residues, found during this search can be tested and compared to the original sample, creating a new method to be stored for later use.

Standards

SWGDRUG analysis categories
Category A Category B Category C
Infrared spectroscopy Capillary electrophoresis Color tests
Mass spectrometry Gas chromatography Fluorescence spectroscopy
Nuclear magnetic
resonance spectroscopy		 Ion-mobility spectrometry Immunoassay
Raman spectroscopy Liquid chromatography Melting point analysis
X-ray diffractometry Microcrystalline tests Ultraviolet spectroscopy
Pharmaceutical identifiers
Thin-layer chromatography
Cannabis only:
Macroscopic and
microscopic examination

In order to maintain a high level of professionalism within the forensic fields, guidelines have been set up by various governing bodies regarding the standards that should be followed by practicing forensic scientists. For forensic chemists, the Scientific Working Group for the Analysis of Seized Drugs (SWGDRUG) presents recommendations for the quality assurance and quality control of tested materials.[35] In the identification of unknown samples, protocols have been grouped into three categories based on the possibility for a false positives. Instruments and protocols in category A are considered the best for uniquely identifying an unknown material, followed by categories B and then C. In order to ensure the accuracy of identifications SWGDRUG recommends that multiple tests using different instruments be performed on each sample, and that one category A technique and at least one other technique be used. If a category A technique is not available, or the forensic chemist decides not to use one, SWGDRUG recommends that at least three techniques be used, two of which must be from category B.[35]: 14–15  Combination instruments, such as GC-MS, are considered two separate tests as long as the results are compared to known values individually. For example, the GC elution times would be compared to known values along with the MS spectra. If both of those match a known substance, no further tests are needed.

Standards and controls are necessary in the quality control of the various instruments used to test samples. Due to the nature of their work in the legal system, chemists must ensure that their instruments are working accurately. To do this, known controls are tested consecutively with unknown samples.[36] By comparing the readouts of the controls with their profiles the instrument can be confirmed to have been working properly at the time the unknowns were tested. Standards are also used to validate the instrument's limit of detection and quantification for various common substances. Calculated quantities must fall within the range tested by the standards in order to be confirmed. If they fall outside of this range the instrument must be tested to ensure that it can accurately measure that quantity.

See also

References

  1. ^ a b "A Simplified Guide to Forensic Drug Chemistry" (PDF). Retrieved September 24, 2015.
  2. ^ Browne, Malcolm W. (April 21, 1995). "Terror in Oklahoma: The Science; Experts Search for Debris to Link Bomb to a Suspect". Retrieved October 28, 2015.
  3. ^ Stern, Wal. "Modern Methods of Accelerant Analysis". T.C. Forensic. Retrieved October 28, 2015.
  4. ^ a b "Common Explosives". The National Counterterrorism Center. Retrieved October 28, 2015.
  5. ^ "Legal BAC limits Data by country". World Health Organization. Retrieved October 30, 2015.
  6. ^ Cellania, Miss (November 3, 2009). "5 Classic Poisons and the People Who Used Them". Mentalfloss. Retrieved September 24, 2015.
  7. ^ a b Pizzi, Richard A. (September 2004). "Pointing to Poison" (PDF). Journal of the American Chemical Society: 43–45. Retrieved September 24, 2015.
  8. ^ Watson, Stephanie (June 9, 2008). "How Forensic Lab Techniques Work". How Stuff Works. Retrieved September 24, 2015.
  9. ^ a b "Mathieu Joseph Bonaventure Orfila (1787–1853)". National Library of Medicine. June 5, 2014. Retrieved September 24, 2015.
  10. ^ a b Wennig, Robert (April 2009). "Back to the roots of modern analytical toxicology: Jean Servais Stas and the Bocarmé murder case" (PDF). Drug Testing and Analysis. 1 (4): 153–155. doi:10.1002/dta.32. PMID 20355192.
  11. ^ a b "Technologies". National Library of Medicine. June 5, 2014. Retrieved September 25, 2015.
  12. ^ a b "Spectroscopy and the Birth of Astrophysics". American Institute of Physics. Retrieved September 25, 2015.
  13. ^ a b Derrick, Michele R.; Stulik, Dusan; Landry, James M. "Infrared Spectroscopy in Conservation Science" (PDF). The Getty Conservation Institute. Retrieved September 26, 2015.
  14. ^ Willis, J B (1993). "The birth of the atomic absorption spectrometer and its early applications in clinical chemistry" (PDF). Clinical Chemistry. 39 (1): 155–160. Retrieved October 6, 2015.
  15. ^ "HPLC – High Performance Liquid Chromatography". Retrieved September 26, 2015.
  16. ^ a b Gohlke, Roland S.; McLafferty, Fred W. (May 1993). "Early gas chromatography/mass spectrometry". Journal of the American Society for Mass Spectrometry. 4 (5): 367–371. doi:10.1016/1044-0305(93)85001-e. Retrieved September 27, 2015.
  17. ^ Kapur, BM (1993). "Drug-testing methods and clinical interpretations of test results". Bulletin on Narcotics. 45 (2): 115–154. Retrieved September 27, 2015.
  18. ^ Gaensslen, R.E.; Kubic, Thomas A.; Desio, Peter J.; Lee, Henry C. (December 1985). "Instrumentation and Analytical Methodology in Forensic Science". Journal of Chemical Education. 62 (12): 1058–1060. doi:10.1021/ed062p1058. Retrieved September 24, 2015.
  19. ^ a b "Forensic Science Communications". Federal Bureau of Investigation. April 2006. Retrieved September 24, 2015.
  20. ^ Angelos, Sanford; Garry, Mike (August 5, 2011). "Seized Drug Analysis Using FT-IR and Mixture Searching For More Effective Identification". Forensic Magazine. Retrieved October 6, 2015.
  21. ^ Izzia, Federico; Nunn, Simon; Bradley, Michael (August 1, 2008). "Analysis of Mixtures by FT-IR: Spatial and Spectral Separation of Complex Samples". Spectroscopy Online. Retrieved October 6, 2015.
  22. ^ "Table of IR Absorptions". UCLA. Retrieved October 6, 2015.
  23. ^ "What is Atomic Absorption?". Techmec LTD. Retrieved October 7, 2015.
  24. ^ "Atomic Absorption Protocols". New Mexico State University. Retrieved October 7, 2015.
  25. ^ "Atomic Absorption Spectroscopy (AAS)". Easy Chem. Retrieved October 7, 2015.
  26. ^ a b Carlysle, Felicity. "TLC the Forensic Way". Glasgow Insight Into Science & Technology. Retrieved October 10, 2015.
  27. ^ "High-Performance Liqiud Chromatography". Just Chromatography. Retrieved October 8, 2015.
  28. ^ Fialkov, Alexander; Steiner, Urs; Lehotay, Steven; Amirav, Aviv (January 15, 2007). "Sensitivity and noise in GC-MS: Achieving low limits of detection for difficult analytes". International Journal of Mass Spectrometry. 260 (1): 31–48. doi:10.1016/j.ijms.2006.07.002. Retrieved October 10, 2015.
  29. ^ a b Smith, Michael L.; Vorce, Shawn P.; Holler, Justin M.; Shimomura, Eric; Magluilo, Joe; Jacobs, Aaron J.; Huestis, Marilyn A. (June 2007). "Modern Instrumental Methods in Forensic Toxicology". Journal of Analytical Toxicology. 31 (5): 237–253. doi:10.1093/jat/31.5.237. Retrieved October 10, 2015.
  30. ^ "Forensic Toxicology". National Institute of Justice. December 23, 2014. Retrieved October 12, 2015.
  31. ^ Foley, Katherine (August 16, 2015). "The science behind forensic toxicology". Quartz. Retrieved October 12, 2015.
  32. ^ Park, Seong Hwan; Zhang, Yong; Hwang, Juck-Joon (May 30, 2009). "Discolouration of the brain as the only remarkable autopsy finding in hydrogen sulphide poisoning". Forensic Science International Journal. 187 (1–3): e19–e21. doi:10.1016/j.forsciint.2009.02.002. Retrieved October 12, 2015.
  33. ^ von Euler, M; Villén, T; Svensson, JO; Ståhle, L (October 2003). "Interpretation of the presence of 6-monoacetylmorphine in the absence of morphine-3-glucuronide in urine samples: evidence of heroin abuse". Therapeutic drug monitoring. 25 (5): 645–648. doi:10.1097/00007691-200310000-00015. PMID 14508389.
  34. ^ Fontaine, Scott (March 12, 2011). "AF using urine tests to detect 'spice' use". AirForceTimes. Retrieved October 13, 2015.
  35. ^ a b "Scientific Working Group For The Analysis Of Seized Drugs (SWGDRUG) Recommendations" (PDF). August 14, 2014. Retrieved October 8, 2015.
  36. ^ "Validation Guidelines for Laboratories Performing Forensic Analysis of Chemical Terrorism". Forensic Science Communications. 7 (2). FBI. April 2005. Retrieved October 16, 2015.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Forensic_chemistry&oldid=717397484"