Jump to content

Naval Materials Research Laboratory

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 17:32, 18 July 2018 (Rescuing 2 sources and tagging 0 as dead. #IABot (v2.0beta2)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Naval Materials Research Laboratory
Established1953
DirectorDr. Manoranjan Patri
AddressShil Badlapur Rd., MIDC Area,
Ambernath- 421506, District Thane, Maharashtra
LocationAmbernath, Maharashtra
Operating agency
DRDO
WebsiteNMRL Home Page

Naval Materials Research Laboratory (NMRL) is an Indian defence laboratory of the Defence Research and Development Organisation (DRDO). Located at Ambernath, in Thane district, Maharashtra. It develops materials and alloys for Naval use, and is a single-window agency for all materials requirement of the Indian Navy. NMRL is organized under the Naval Research & Development Directorate of DRDO. The present director of NMRL is Dr Manoranjan Patri.

History

NMRL was established in 1953 as the Naval Chemical and Metallurgical Laboratory, an in-house laboratory of the Navy, located at the Naval Dockyard, Mumbai. It was brought under the administrative control of DRDO in the early 1960s.[1] The laboratory is located in its own technical-cum residential complex at Ambernath, Maharashtra. The laboratory still has its erstwhile infrastructure intact in Naval Dockyard, Mumbai, without any physical scientific or administrative presence.

Areas of work[2]

  • Fuel Cell Power Pack Technology[3]
  • Advanced Protection Technology in Marine Environment
  • Electrochemistry & Electrochemical Processes
  • Polymer and Elastomer Science and Technology including Stealth Material
  • Processing Technologies for Speciality Metallic and Non-metallic Materials
  • Chemical and Biological Control of Marine Environment

Facilities

Projects and Products

Technologies for Civilian use

  • Bio-emulsifier - for Bio-remediation of floating oil.
  • Arsenic removal kit - NMRL has developed a low-cost arsenic removal filter to remove arsenic from contaminated drinking water. The filter is made of stainless steel, and the filter medium is a processed waste of the steel industry. The filter works on the principle of co-precipitation and adsorption, which is followed by filtration through treated sand. The complete filter costs Rs. 500, has a life of 5 years and does not require any electricity to run. After six months of testing in 24 Paraganas District in West Bengal, the technology was given to NGOs for productionizing.[4]

References

  1. ^ "NMRL Historical Origins". Archived from the original on 2008-03-02. Retrieved 2008-02-10. {{cite web}}: Unknown parameter |dead-url= ignored (|url-status= suggested) (help)
  2. ^ "NMRL Areas of work". Archived from the original on 2008-03-02. Retrieved 2008-02-10. {{cite web}}: Unknown parameter |dead-url= ignored (|url-status= suggested) (help)
  3. ^ S. Roy Choudhury; J. Rangarajan (11 April 2004). "Nature Of Hydrogen Demand for Fuel Cells and NMRL's Experience on Onsite Hydrogen Generation" (PPT). Power Ministry, Government of India. Retrieved 2008-02-10. [dead link]
  4. ^ M. Somasekhar (2 June 2004). "Low-cost remedies to remove arsenic". Business Line. The Hindu. Retrieved 2008-02-10.

See also