Rolls-Royce Nene
| RB.41 Nene Pratt & Whitney J42 | |
|---|---|
| |
| Rolls-Royce Nene on display at RAAF Base Pearce, Western Australia - note the wire mesh grille around the air intake to prevent Foreign object damage | |
| Type | Turbojet |
| Manufacturer | Rolls-Royce Limited |
| First run | 27 October Template:Avyear |
| Major applications | Canadair CT-133 Silver Star Dassault Ouragan de Havilland Vampire Grumman F9F Panther Hawker Sea Hawk |
| Number built | 1,139 (J42) |
| Developed into | Rolls-Royce RB.44 Tay Klimov VK-1 Rolls-Royce Derwent |
The Rolls-Royce RB.41 Nene was a 1940s British centrifugal compressor turbojet engine. The Nene was a complete redesign, rather than a scaled-up Rolls-Royce Derwent[1] with a design target of 5,000 lbf, making it the most powerful engine of its era. It was Rolls-Royce's third jet engine to enter production, and first ran less than 6 months from the start of design. It was named after the River Nene in keeping with the company's tradition of naming its early jet engines after rivers.
The design saw relatively little use in British aircraft designs, being passed over in favour of the axial-flow Avon that followed it. Its only widespread use in the UK was in the Hawker Sea Hawk and the Supermarine Attacker. In the US it was built under licence as the Pratt & Whitney J42, and it powered the Grumman F9F Panther. Its most widespread use was in the form of the Klimov VK-1, a reverse-engineered, modified and enlarged version which produced around 6,000lbs of thrust, and powered the famous Mikoyan-Gurevich MiG-15, a highly successful fighter aircraft which was built in vast numbers.
A more powerful slightly enlarged version of the Nene was produced as the Rolls-Royce Tay.
Design and development
The Nene was designed and built as a result of an early 1944 Air Ministry request for an engine of 4,200 lb thrust, and an engine was schemed-out by Stanley Hooker and Adrian Lombard as the B.40. In the summer of 1944 Hooker visited the USA and discovered that General Electric already had two engine types, an axial and a centrifugal, of 4,000 lb thrust running. On returning to the UK Hooker decided to go for 5,000 lb of thrust and, working with Lombard, Pearson and Morley, a complete redesign of the B.40 resulted in the B.41,[1] later to be called the Nene.
The double-sided impeller was 28.8 inches in diameter, compared to 20.68 for the Derwent I, to produce an airflow of 80 lb/sec, while the overall diameter of the engine was 49.5 inches. A scaled up Derwent would have a 60 inch diameter. The compressor casing was based on Whittle's Type 16 W.2/500 compressor case which was more aerodynamically efficient than that on the Derwent but also eliminated cracking. Other design advances included nine new low pressure-drop/high efficiency combustion chambers developed by Lucas and a small impeller for rear bearing and turbine disc cooling.[2] The first engine start was attempted on 27 October 1944. A number of snags delayed the run until nearly midnight, when with almost the entire day and night shift staff watching, an attempt was made to start the engine, without the inlet vanes, which had not yet been fitted. To everyone's dismay the engine refused to light - positioning the igniter was a trial-and-error affair at the time. On the next attempt, Denis Drew unscrewed the igniter and as the starter motor ran the engine up to speed, lit the engine with an oxy-acetylene torch. The engine was run up to 4,000 lb and more, and a cheer went up around the assembled personnel. Upon Hooker's arrival next morning, and informed that the inlet vanes had been fitted during the night, Hooker was satisfied to see the thrust gauge needle registering 5,000 lb, making the B.41 the most powerful jet engine in the world. Weight was around 1,600 lb.[3]
The Nene was based on the "straight-through" version of the basic Whittle-style layout, with the flow going directly through the engine from front to rear, as opposed to a "reverse-flow" type, which reverses the direction of air flow though the combustor section so that the turbine stage can be mounted within the combustor section; this allows for a more compact engine, but increases the combustor pressure losses which has an adverse effect on engine performance.[4] Less thrust is generated with the same fuel flow. It was during the design of the Nene that Rolls decided to give their engines numbers as well as names, with the Welland and Derwent keeping their original Rover models, B/23 and B/26. It was later decided that these model designations looked too much like RAF bomber designations (i.e. "English Electric Canberra B.Mk 2" would often be shortened to "Canberra B.2"), and "R" was added to the front, the "R" signifying "Rolls" and the original Rover "B" signifying Barnoldswick.[citation needed] This RB designation scheme continued into the late 20th Century, with turbofan designs such as the RB.199, RB.203 and RB.211; the most recent family of Rolls-Royce turbofans (a development of the RB.211) goes under the simple designation "Rolls-Royce Trent", with variants given their own designator number or letter series (i.e. Trent 500, Trent 900, Trent 1000, Trent XWB, etc).
Early airborne tests of the Nene were undertaken in an Avro Lancastrian operated by Rolls-Royce from their Hucknall airfield. The two outboard Rolls-Royce Merlins were replaced by the jet engine. The Nene's first flight however was in a modified Lockheed XP-80 Shooting Star.[5]
After seeing the Nene running, at an after work drink at the Swan & Royal Hotel, Clitheroe, and hearing the complaints about a lack of any official application for the engine, someone - thought to be Whittle - suggested that the Nene be scaled-down to fit a Meteor nacelle. J.P. Herriot or Lombard did the calculation on a tablecloth and announced a thrust of 3,650 lb. At this time they were attempting to increase the Derwent's thrust from 2,200 lb to 2,450 lb, and the idea seemed "too good to be true". On hearing this, Hooker did a quick calculation and announced, "We've got a 600-mph Meteor".[6]
Drawings for the 0.855 scale Nene, now known as the Derwent V, were started on 1 January 1945 and on 7 June the engine began a 100-hour test at 2,600 lb, soon reaching 3,500 lb. Weight was 1,250 lb. By 1946 thrust had been increased to 4,200 lb using Nimonic 90 turbine blades.[6]
The development of the Nene was continued with this scaled-down version, the Derwent V having no direct relationship to the earlier Derwent series. On 7 November 1945, the first official air speed record by a jet aircraft was set by a Meteor F.3 of 606 miles per hour (975 km/h) powered by the scaled-down Nene, the Derwent V
Service use
The Nene doubled the thrust of the earlier generation engines, with early versions providing about 5,000 lbf (22.2 kN), but remained generally similar in most ways. This should have suggested that it would be widely used in various designs, but the Gloster Meteor proved so successful with its Derwents that the Air Ministry felt there was no pressing need to improve upon it. Instead a series of much more capable designs using the Rolls-Royce Avon were studied, and the Nene generally languished.
The Nene was used to power the first civil jet aircraft,[7] a modified Vickers Viking, which flew first on 6 April 1948.[7]
Pratt and Whitney was given a licence to produce the Nene as the Pratt & Whitney J42, and it powered the Grumman F9F Panther.[8] Twenty-five were given to the Soviet Union as a gesture of goodwill - with reservation to not use for military purposes - with the agreement of Stafford Cripps. The Soviets reneged on the deal, and reverse engineered the Nene to develop the Klimov RD-45, and a larger version, the Klimov VK-1, which soon appeared in various Soviet fighters including Mikoyan-Gurevich MiG-15. It was briefly made under licence in Australia for use in the RAAF de Havilland Vampire fighters. It was also built by Orenda in Canada for use in 656 Canadair CT-133 Silver Star aircraft.
Variants
- Nene Mk.3
- With an electric starter motor and two torch igniters the Mk.3 powered the Supermarine Attacker F Mk.1.
- Nene Mk.10
- Similar to the Mk.102 but with a larger accessories wheelcase for the Lockheed T-33.
- Nene Mk.101
- With a bifurcated jet-pipe for the Hawker Sea Hawk, at a reduced output of 5,000 lbf (22.24 kN)
- Nene Mk.102
- Similar to the Mk.3, but incorporating more modern equipment, for the Supermarine Attacker FB Mk.2
- Pratt & Whitney J42
- US licence production
- Kuznetsov RD-45
- Unlicensed copy produced in the USSR
Applications
- Nene
- Pratt & Whitney J42
Engines on display
A Complete Nene Engine is Displayed at the RAF Manston History Museum, Manston, Kent.
A sectioned Rolls-Royce Nene is on display at the Fleet Air Arm Museum, RNAS Yeovilton.
- Gatwick Aviation Museum Charlwood surrey
- Rolls-Royce Nene
There is a cutaway Nene II on display at the New England Air Museum
A sectioned Hispano-Suiza Nene is on display at the Ailes Anciennes Toulouse Museum in France.
- Ailes Anciennes Toulouse Museum Toulouse/Blagnac
A DERWENT ( from Meteors and PULQUI I) , a NENE ( from the PULQUI II) and two Avon s ( 1 from Canberra and one from a Comet)and two Klimov VK1 are on display at the National Aeronautics Museum- Moron- Buenos Aires - Argentina
Specifications (Nene)
Data from [9]
General characteristics
- Type: Centrifugal compressor turbojet
- Length: 96.8 in (2,458.7 mm)
- Diameter: 49.5 in (1,257.3 mm)
- Dry weight: 1,600 lb (725.7 kg)
Components
- Compressor: single stage centrifugal with double-sided impeller
- Combustors: 9 x can combustion chambers
- Turbine: Single-stage axial
- Fuel type: Kerosene (R.D.E.F./F/KER)
- Oil system: pressure feed, dry sump with scavenge, cooling and filtration, oil grade 70 S.U. secs (13 cs) (D.T.D 44D) at 38 °C (100 °F)
Performance
- Maximum thrust: 5,000 lbf (22.24 kN) at 12,300 rpm at sea level for take=off
- Specific fuel consumption: 1.06 lb/lbf/hr (108.04 kg/kN/hr)
- Thrust-to-weight ratio: 3.226 lbf/lb (0.0315 kN/kg)
- Military, static: 5,000 lbf (22.24 kN) at 12,300 rpm at sea level
- Max. cruising, static: 4,360 lbf (19.39 kN) at 12,000 rpm at sea level
- Cruising, static: 3,620 lbf (16.10 kN) at 11,500 rpm at sea level
- Idling, static: 120 lbf (0.53 kN) at 2,500 rpm at sea level
See also
Related development
Related lists
References
- Notes
- ^ a b "Rolls-Royce Aero Engines" Bill Gunston, Patrick Stephens Limited 1989, ISBN 1-85260-037-3, p.111
- ^ "Not Much Of An Engineer" Sir Stanley Hooker, Airlife Publishing 2002, ISBN 1-85310-285-7, p.88
- ^ "World Encyclopedia of Aero Engines - 5th edition" by Bill Gunston, Sutton Publishing, 2006, p.193
- ^ http://naca.central.cranfield.ac.uk/reports/arc/rm/2579.pdf Fig.17
- ^ http://www.flightglobal.com/pdfarchive/view/1946/1946%20-%200764.html
- ^ a b "World Encyclopedia of Aero Engines - 5th edition" by Bill Gunston, Sutton Publishing, 2006, p.194
- ^ a b http://www.flightglobal.com/pdfarchive/view/1949/1949%20-%200401.html
- ^ Connors, p.202
- ^ Wilkinson, Paul H. (1946). Aircraft Engines of the world 1946. London: Sir Isaac Pitman & Sons. pp. 298–299.
- Bibliography
- Wilkinson, Paul H. (1946). Aircraft Engines of the world 1946. London: Sir Isaac Pitman & Sons. pp. 298–299.
- Bridgman, L, (ed.) (1998) Jane's fighting aircraft of World War II. Crescent. ISBN 0-517-67964-7
- Connors, Jack (2010). The Engines of Pratt & Whitney: A Technical History. Reston. Virginia: American Institute of Aeronautics and Astronautics. ISBN 978-1-60086-711-8.
{{cite book}}: Cite has empty unknown parameter:|coauthors=(help) - Kay, Anthony L. (2007). Turbojet History and Development 1930-1960. Vol. 1 (1st ed.). Ramsbury: The Crowood Press. ISBN 978-1-86126-912-6.
External links
- Pratt & Whitney History page on the J42
- The Nanton Lancaster Society
- "Rolls-Royce Nene I" a 1946 Flight article on the Nene