Jump to content

Washington's 10th congressional district

Coordinates: 47°00′N 122°50′W / 47.000°N 122.833°W / 47.000; -122.833
From Wikipedia, the free encyclopedia
(Redirected from WA-10)

Washington's 10th congressional district
Map
Interactive map of district boundaries since January 3, 2023
Representative
Area827 sq mi (2,140 km2)
Distribution
  • 92.0% urban
  • 8.0% rural
Population (2023)773,712[1]
Median household
income
$92,224[2]
Ethnicity
Cook PVID+7[3]

Washington's 10th congressional district is a congressional district in western Washington. The district is centered on the state capital, Olympia, and includes portions of Thurston and Pierce counties (including parts of Tacoma). It was created after the 2010 United States census, which granted Washington an additional congressional seat, bringing the number of seats apportioned to the state up from 9 to 10, and elected Denny Heck as its first member to the United States House of Representatives in the 2012 elections. Marilyn Strickland was elected in 2020 to replace him after he retired to run for Lieutenant Governor.

Redistricting 2011-2012

[edit]

By Washington state law, a non-partisan commission composed of two Republicans, two Democrats, and a non-voting chairperson drew the boundaries for this new district, as well as the new boundaries for Washington's existing districts.[4] The Washington Redistricting Commission was tasked with drawing the maps for congressional and legislative districts in the year after each census, including the new 10th congressional district. The first commissioners' maps were released on September 13, 2011.[5] In addition, several third party maps were submitted to the commissioners by citizens and advocacy groups.[6]

Commissioner Tim Ceis

[edit]

Commissioner Ceis, representing the Senate Democratic leadership, submitted a draft plan that would place the new 10th district in SW Pierce, northern Thurston, eastern Mason, and far southern King counties. It would include the cities of Shelton, Olympia, Fircrest, Pacific, Fife, Puyallup, and part of Tacoma. Federal Way, Auburn, Bonney Lake, Orting, Yelm, and McCleary were just outside the borders of the proposed 10th district.[7] This proposed 10th district voted for Democrat Patty Murray over Republican Dino Rossi about 53.7/46.3 in the 2010 Senate Election, and is around 68.3% white.[8]

Commissioner Slade Gorton

[edit]

Commissioner Gorton, representing the Senate Republican leadership, submitted a draft plan placing the new 10th district across the northern part of the state, straddling the Cascade mountains to take in Island, San Juan, Whatcom, Skagit, Chelan, Douglas, Okanogan, northern and eastern parts of Snohmish county, and the city of Skykomish in King county. It would have included the cities of Bellingham, Granite Falls, Arlington, Monroe, Wenatchee, Iroville, and most of Coulee Dam. Grand Coulee, Quincy, Republic, and Marysville were just outside the proposed boundaries.[9] This proposed 10th district voted for Republican Dino Rossi over Democrat Patty Murray about 52.6/47.4, and is 79% white.[8] Gorton's proposal also suggested the possibility of renumbering the congressional districts from west to east, which would mean that district No. 10 would be in the far east of the state, where the existing (pre-2012) 5th district was located.[10]

Commissioner Dean Foster

[edit]

Commissioner Foster, representing the House Democratic leadership, submitted a draft plan that would place the new 10th district on the Pacific Coast, Olympic Peninsula, and south Puget Sound, taking in Pacific, Grays Harbor, Clallam, all but the easternmost portion of Jefferson, western Mason, northern Thurston, and southwest Pierce counties. It would include Sequim, Olympia, Fife, Puyallup, Eatonville, and Steilacoom, while excluding Shelton, Port Townsend, Lakewood, Sumner, Orting, Tacoma, and Yelm.[11] This proposed 10th district voted for Democrat Patty Murray over Republican Dino Rossi 51.3/48.7, and is 75.8% white.[8]

Commissioner Tom Huff

[edit]

Commissioner Huff, representing the House Republican leadership, submitted a draft plan that would make the new 10th district a majority-minority district, entirely in south King county. It would include, Federal Way, Kent, Newcastle, SeaTac, Des Moines, Pacific, and parts of south Seattle, Auburn, and Burien.[12] This proposed 10th district voted for Democrat Patty Murray over Republican Dino Rossi 63/37, and is 48.8% white, 19.9% Asian, 13.6% Hispanic, 11.9% Black, and 5.9% Native and others.[8]

Third-party submissions

[edit]

Several third parties submitted draft plans to the Redistricting Commission for consideration.[6] Of those plans, United for Fair Representation WA / Win-Win Network submitted a plan quite similar to Commissioner Foster's draft proposal for the 10th district.[13] John Milem's submission includes a district that closely matches Commissioner Gorton's draft proposal for the 10th.[14] United for Fair Representation's Unity map proposal also has a district quite similar to the draft proposal from Commissioner Ceis. Van Anderson submitted a proposal that includes a coastal/Olympic peninsula 10th district similar to Commissioner Foster's draft proposal for the 10th district.[15]

The Gorton/Ceis compromise

[edit]

At the December 16, 2011 Redistricting Commission meeting, Commissioners Gorton and Ceis were tasked with developing the 2012 congressional district map, while Commissioners Foster and Huff worked on a legislative plan for Eastern Washington.[16] At the December 28 meeting, Commissioners Ceis and Gorton released a proposed congressional map which created a 10th district centered on Olympia including Fort Lewis/McChord Air Field (Joint Base Lewis-McChord facility), McNeil and Anderson islands, the cities of Shelton, Tenino, University Place, Puyallup, Fife, Edgewood, Sumner, most of eastern Tacoma, and the Pierce County portions of Milton and Pacific.[17] The final map of the 10th congressional district did not deviate significantly from the Gorton/Ceis proposal (see next para.). The state legislature will be able to amend the finalized Commission borders by up to 2% of the population with a supermajority vote.

Final Commission-approved Plan

[edit]

The Washington Redistricting Commission officially approved a congressional redistricting plan for the approval of the state legislature on January 1, 2012, just before 10 pm, two hours before the statutory deadline. The final congressional plan for the 10th district closely mirrored the Gorton/Ceis proposal, except that the cities of Milton and Pacific were placed entirely in the 8th district, instead of being split at the King/Pierce county line. In compensation for the loss of Milton and Pacific, the dividing line between the 10th and 8th districts was altered to include a larger population between Puyallup and Roy. [18]

Recent election results in presidential races

[edit]
Election results from presidential races
Year Office Results
2012 President Obama 56 - 41%
2016 President Clinton 51 - 39%
2020 President Biden 56 - 40%

List of members representing the district

[edit]
Member Party Term Cong
ress
Electoral history District location
District established January 3, 2013

Denny Heck
(Olympia)
Democratic January 3, 2013 –
January 3, 2021
113th
114th
115th
116th
Elected in 2012.
Re-elected in 2014.
Re-elected in 2016.
Re-elected in 2018.
Retired to run for Lieutenant Governor of Washington.
2013–2023

Parts of Mason, Pierce, and Thurston

Marilyn Strickland
(Tacoma)
Democratic January 3, 2021 –
present
117th
118th
Elected in 2020.
Re-elected in 2022.
2023–present

Parts of Pierce and Thurston

Recent election results

[edit]

2012

[edit]
Washington 10th Congressional District - 6 November 2012
Party Candidate Votes %
Democratic Denny Heck 163,036 58.6
Republican Richard (Dick) Muri 115,381 41.4
Total votes 278,417 100.0

2014

[edit]
Washington's 10th congressional district, 2014
Party Candidate Votes %
Democratic Denny Heck (incumbent) 99,279 54.7
Republican Joyce McDonald 82,213 45.3
Total votes 181,492 100.0
Democratic hold

2016

[edit]
Washington's 10th congressional district, 2016
Party Candidate Votes %
Democratic Denny Heck (incumbent) 170,460 58.7
Republican Jim Postma 120,104 41.3
Total votes 290,564 100.0
Democratic hold

2018

[edit]
Washington's 10th congressional district, 2018
Party Candidate Votes %
Democratic Denny Heck (incumbent) 166,215 61.5
Republican Joseph Brumbles 103,860 38.5
Total votes 270,075 100.0
Democratic hold

2020

[edit]
Washington's 10th congressional district, 2020[19]
Party Candidate Votes %
Democratic Marilyn Strickland 167,937 49.33
Democratic Beth Doglio 121,040 35.56
Write-in 51,430 15.11
Total votes 340,407 100.0
Democratic hold

2022

[edit]
Washington's 10th congressional district, 2022[20]
Party Candidate Votes %
Democratic Marilyn Strickland (incumbent) 152,544 57.0
Republican Keith Swank 114,777 42.9
Write-in 427 0.2
Total votes 267,748 100.0
Democratic hold

See also

[edit]

References

[edit]
  1. ^ Barone, Michael (2013). Koszczuk, Jackie (ed.). The Almanac of American Politics (2014 ed.). Chicago: The University of Chicago Press. pp. 1791–1793. ISBN 978-0-226-10544-4.
  2. ^ "My Congressional District".
  3. ^ "2022 Cook PVI: District Map and List". Cook Political Report. Retrieved January 10, 2023.
  4. ^ "Census confirms Washington will get 10th seat in U.S. House". Miami Herald. December 21, 2010. Retrieved December 21, 2010.
  5. ^ "Existing Maps". Washington State Redistricting Commission. Retrieved September 14, 2011.
  6. ^ a b "Do-It-Yourself Kit". Washington State Redistricting Commission. Retrieved September 14, 2011.
  7. ^ Ceis, Tim. "Draft Congressional Plan No. 1 – Commissioner Ceis – September 13, 2011" (PDF). Washington State Redistricting Commission. Retrieved September 14, 2011.
  8. ^ a b c d Bradley, Dave. "Washington Redistricting: Numbers". Daily Kos elections diary. Daily Kos. Retrieved September 14, 2011.
  9. ^ Gorton, Slade. "Draft Congressional Plan No. 1 – Commissioner Gorton – September 13, 2011" (PDF). Washington State Redistricting Commission. Retrieved September 14, 2011.
  10. ^ Gorton, Slade. "September 13 presentation" (PDF). Washington State Redistricting Commission. Retrieved September 13, 2011.
  11. ^ Foster, Dean. "Draft Congressional Plan No. 1 – Commissioner Foster – September 13, 2011" (PDF). Washington State Redistricting Commission. Retrieved September 14, 2011.
  12. ^ Huff, Tom. "Draft Congressional Plan No. 1 – Commissioner Huff – September 13, 2011" (PDF). Washington State Redistricting Commission. Retrieved September 14, 2011.
  13. ^ "10th Dist Map" (PDF). WinWin Network. Retrieved September 14, 2011.
  14. ^ Millem, John. "Millem Exact" (PDF).
  15. ^ Anderson, Van. "Congressional Map" (PDF). Retrieved September 14, 2011.
  16. ^ "Commission Meetings and Public Forums". Washington Redistricting Commission. Retrieved December 28, 2011.
  17. ^ "2011 Commissioners Draft Plans". Proposed Draft Congressional Map from December 28, 2011 Special Meeting. Washington Redistricting Commission. Retrieved December 28, 2011.
  18. ^ "2011 Final Plan as voted on by the Commission". Washington Redistricting Commission. Retrieved January 1, 2012.
  19. ^ "November 3, 2020 General Election Results". Washington Secretary of State. Retrieved December 4, 2020.
  20. ^ "November 8, 2022 General Election Results - CONGRESSIONAL DISTRICT 10". Secretary of State of Washington. Retrieved November 9, 2022.
[edit]

47°00′N 122°50′W / 47.000°N 122.833°W / 47.000; -122.833