Jump to content

List of ISO standards 22000–23999

From Wikipedia, the free encyclopedia

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]

ISO 22000 – ISO 22999

[edit]
  • ISO 22000:2018 Food safety management systems – Requirements for any organization in the food chain
  • ISO/TS 22002 Prerequisite programmes on food safety
    • ISO/TS 22002-1:2009 Part 1: Food manufacturing
    • ISO/TS 22002-2:2013 Part 2: Catering
    • ISO/TS 22002-3:2011 Part 3: Farming
    • ISO/TS 22002-4:2013 Part 4: Food packaging manufacturing
    • ISO/TS 22002-5:2019 Part 5: Transport and storage
    • ISO/TS 22002-6:2016 Part 6: Feed and animal food production
  • ISO/TS 22003:2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
  • ISO 22004:2014 Food safety management systems – Guidance on the application of ISO 22000
  • ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
  • ISO 22006:2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production)
  • ISO/IEC 22050:2002 Information technology – Data interchange on 12,7 mm, 384-track magnetic tape cartridges – Ultrium-1 format
  • ISO/IEC 22051:2002 Information technology – Data interchange on 12,7 mm, 448-track magnetic tape cartridges – SDLT1 format
  • ISO 22077 Health informatics – Medical waveform format
    • ISO 22077-1:2015 Part 1: Encoding rules
    • ISO/TS 22077-2:2015 Part 2: Electrocardiography
    • ISO/TS 22077-3:2015 Part 3: Long term electrocardiography
  • ISO/IEC 22091:2002 Information technology – Streaming Lossless Data Compression algorithm (SLDC)
  • ISO/IEC 22092:2002 Information technology - Data interchange on 130 mm magneto-optical disk cartridges - Capacity: 9,1 Gbytes per cartridge
  • ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
  • ISO 22095:2020 Chain of Custody
  • ISO 22096:2007 Condition monitoring and diagnostics of machines – Acoustic emission
  • ISO/TR 22100 Safety of machinery – Relationship with ISO 12100
  • ISO/TR 22100-3:2016 Part 3: Implementation of ergonomic principles in safety standards
  • ISO 22112:2017 Dentistry — Artificial teeth for dental prostheses
  • ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
  • ISO 22118:2011 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens – Performance characteristics
  • ISO 22119:2011 Microbiology of food and animal feeding stuffs – Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
  • ISO 22128:2008 Terminology products and services - Overview and guidance
  • ISO/TR 22134:2007 Practical guidelines for socioterminology
  • ISO/TS 22163:2017 Railway applications – Quality management system – Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector
  • ISO 22174:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
  • ISO/TS 22220:2011 Health informatics – Identification of subjects of health care
  • ISO/TR 22221:2006 Health informatics – Good principles and practices for a clinical data warehouse
  • ISO 22222:2005 Personal financial planning—Requirements for personal financial planners
  • ISO 22232 Non-destructive testing - Characterization and verification of ultrasonic test equipment
    • Part 1: Instruments
    • Part 2: Probes
    • Part 3: Combined equipment
  • ISO 22241 Diesel engines – NOx reduction agent AUS 32
    • ISO 22241-1 Quality requirements
    • ISO 22241-2 Test methods
    • ISO 22241-3 Handling, transportation and storing
  • ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO 22266 Mechanical vibration – Torsional vibration of rotating machinery
    • ISO 22266-1:2009 Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
  • ISO 22274:2013 Systems to manage terminology, knowledge and content - Concept-related aspects for developing and internationalizing classification systems
  • ISO/IEC 22275:2018 Information technology – Programming languages, their environments, and system software interfaces – ECMAScript® Specification Suite
  • ISO/IEC TS 22277:2017 Technical Specification – C++ Extensions for Coroutines
  • ISO 22300:2018 Security and resilience – Vocabulary
  • ISO 22301:2019 Security and resilience – Business continuity management systems – Requirements[3]
  • ISO/TR 22302:2014 Natural gas - Calculation of methane number
  • ISO 22303:2008 Tobacco - Determination of tobacco specific nitrosamines - Method using buffer extraction
  • ISO/TS 22304:2008 Tobacco - Determination of tobacco specific nitrosamines - Method using alkaline dichloromethane extraction
  • ISO/TR 22305:2006 Cigarettes - Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke - Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
  • ISO 22306:2007 Fibre-reinforced cement pipe, joints and fittings for gravity systems
  • ISO 22307:2008 Financial services – Privacy impact assessment
  • ISO 22308:2005 Cork stoppers - Sensory analysis
  • ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
  • ISO 22310:2006 Information and documentation - Guidelines for standards drafters for stating records management requirements in standards
  • ISO 22311:2012 Societal security – Video-surveillance – Export interoperability
  • ISO/TR 22312:2011 Societal security – Technological capabilities (WITHDRAWN)
  • ISO 22313:2020 Security and resilience – Business continuity management systems – Guidance on the use of ISO 22301[4]
  • ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
  • ISO 22315:2015 Societal security – Mass evacuation – Guidelines for planning[5]
  • ISO 22316:2017 Security and resilience - Organizational resilience—Principles and attributes
  • ISO/TS 22317:2015 Societal security – Business continuity management systems – Guidelines for business impact analysis[6]
  • ISO/TS 22318:2015 Societal security – Business continuity management systems – Guidelines for supply chain continuity[7]
  • ISO 22319:2017 Security and resilience – Community resilience – Guidelines for planning the involvement of spontaneous volunteers[8]
  • ISO 22320:2018 Security and resilience – Emergency management – Guidelines for incident management[9]
  • ISO 22322:2015 Societal security – Emergency management – Guidelines for public warning[10]
  • ISO 22324:2015 Societal security – Emergency management – Guidelines for colour coded alert[11]
  • ISO 22325:2016 Security and resilience – Emergency management – Guidelines for capability assessment[12]
  • ISO 22326:2018 Security and resilience – Emergency management – Guidelines for monitoring facilities with identified hazards[13]
  • ISO 22327:2018 Security and resilience – Emergency management – Guidelines for implementation of a community-based landslide early warning system[14]
  • ISO/TS 22330:2018 Security and resilience – Business continuity management systems – Guidelines for people aspects on business continuity[15]
  • ISO/TS 22331:2018 Security and resilience – Business continuity management systems – Guidelines for business continuity strategy[16]
  • ISO/TR 22335:2007 Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
  • ISO/TR 22351:2015 Societal security – Emergency management – Message structure for exchange of information
  • ISO/TS 22367:2008 Medical laboratories - Reduction of error through risk management and continual improvement
  • ISO 22368-1:2004 Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1: Internal cleaning of complete sprayers
  • ISO 22369-1:2006 Crop protection equipment - Drift classification of spraying equipment - Part 1: Classes
  • ISO 22374:2005 Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips
  • ISO/TS 22375:2018 Security and resilience - Guidelines for complexity assessment process
  • ISO 22380:2018 Security and resilience – Authenticity, integrity and trust for products and documents – General principles for product fraud risk[17]
  • ISO 22381:2018 Security and resilience – Authenticity, integrity and trust for products and documents – Guidelines for interoperability of product identification and authentication systems[18]
  • ISO 22382:2018 Security and resilience – Authenticity, integrity and trust for products and documents – Guidelines for the content, security and issuance of excise tax stamps[19]
  • ISO 22389-1:2010 Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
  • ISO 22390:2010 Timber structures - Laminated veneer lumber - Structural properties
  • ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
  • ISO 22392:2020 Security and resilience – Community resilience – Guidelines for conducting peer reviews[20]
  • ISO 22394:2010 Hardmetals - Knoop hardness test
  • ISO 22395:2018 Security and resilience – Community resilience – Guidelines for supporting vulnerable persons in an emergency[21]
  • ISO 22396:2020 Security and resilience – Community resilience – Guidelines for information exchange between organisations[22]
  • ISO 22397:2014 Societal security – Guidelines for establishing partnering arrangements[23]
  • ISO 22398:2014 Societal security – Guidelines for exercises[24]
  • ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management (WITHDRAWN)
  • ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
  • ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
  • ISO 22413:2010 Transfer sets for pharmaceutical preparations – Requirements and test methods
  • ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification
  • ISO/TS 22475 Geotechnical investigation and testing – Sampling methods and groundwater measurements
    • ISO/TS 22475-3:2007 Part 3: Conformity assessment of enterprises and personnel by third party
  • ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary
  • ISO 22514 Statistical methods in process management - Capability and performance
    • ISO 22514-1:2014 Part 1: General principles and concepts
    • ISO 22514-2:2017 Part 2: Process capability and performance of time-dependent process models
    • ISO 22514-3:2008 Part 3: Machine performance studies for measured data on discrete parts
    • ISO 22514-4:2016 Part 4: Process capability estimates and performance measures
    • ISO 22514-6:2013 Part 6: Process capability statistics for characteristics following a multivariate normal distribution
    • ISO 22514-7:2012 Part 7: Capability of measurement processes
    • ISO 22514-8:2014 Part 8: Machine performance of a multi-state production process
  • ISO 22523:2006 External limb prostheses and external orthoses – Requirements and test methods
  • ISO/IEC 22533:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 2,3 Gbytes per cartridge
  • ISO/IEC 22534:2005 Information technology – Telecommunications and information exchange between systems – Application session services
  • ISO/IEC 22535:2009 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Tunnelling of QSIG over SIP
  • ISO/IEC 22536:2013 Information technology - Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol (NFCIP-1) - RF interface test methods
  • ISO/IEC 22537:2006 Information technology - ECMAScript for XML (E4X) specification
  • ISO/TR 22588:2005 Optics and photonics – Lasers and laser-related equipment – Measurement and evaluation of absorption-induced effects in laser optical components
  • ISO 22600 Health informatics – Privilege management and access control
    • ISO 22600-1:2014 Part 1: Overview and policy management
    • ISO 22600-2:2014 Part 2: Formal models
    • ISO 22600-3:2014 Part 3: Implementations
  • ISO 22665:2012 Ophthalmic optics and instruments – Instruments to measure axial distances in the eye
  • ISO 22675:2016 Prosthetics – Testing of ankle-foot devices and foot units – Requirements and test methods
  • ISO/TR 22676:2006 Prosthetics – Testing of ankle-foot devices and foot units – Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment
  • ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
  • ISO 22717:2015 Cosmetics – Microbiology – Detection of Pseudomonas aeruginosa
  • ISO 22718:2015 Cosmetics – Microbiology – Detection of Staphylococcus aureus
  • ISO 22727:2007 Graphical symbols - Creation and design of public information symbols - Requirements
  • ISO 22742:2010 Packaging - Linear bar code and two-dimensional symbols for product packaging
  • ISO 22745 Industrial automation systems and integration - Open technical dictionaries and their application to master data
    • ISO 22745-2:2010 Part 2: Vocabulary
  • ISO/IEC TR 22767:2005 Information technology – Telecommunications and information exchange between systems – Using CSTA for SIP phone user agents (uaCSTA)
  • ISO/TS 22789:2010 Health informatics – Conceptual framework for patient findings and problems in terminologies
  • ISO/TS 22809:2007 Non-destructive testing – Discontinuities in specimens for use in qualification examinations
  • ISO 22829:2017 Resistance welding equipment – Transformers – Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
  • ISO 22837:2009 Vehicle probe data for wide area communications
  • ISO 22839:2013 Intelligent transport systems – Forward vehicle collision mitigation systems – Operation, performance, and verification requirements
  • ISO 22840:2010 Intelligent transport systems – Devices to aid reverse manoeuvres – Extended-range backing aid systems (ERBA)
  • ISO/PAS 22853:2005 Ships and marine technology – Computer applications – Specification of Maritime Safety Markup Language (MSML)
  • ISO 22857:2013 Health informatics – Guidelines on data protection to facilitate trans-border flows of personal health data
  • ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy)
  • ISO 22870:2016 Point-of-care testing (POCT) – Requirements for quality and competence
  • ISO 22877:2004 Castors and wheels – Vocabulary, symbols and multilingual terminology
  • ISO 22935 Milk and milk products – Sensory analysis
    • ISO 22935-1:2009 Part 1: General guidance for the recruitment, selection, training and monitoring of assessors
  • ISO 22951:2009 Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)
  • ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.
  • ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
  • ISO/TR 22979:2017 Ophthalmic implants – Intraocular lenses – Guidance on assessment of the need for clinical investigation of intraocular lens design modifications

ISO 23000 – ISO 23999

[edit]
  • ISO/IEC 23000 Information technology - Multimedia application format (MPEG-A)
  • ISO/IEC 23001 Information technology – MPEG systems technologies
    • ISO/IEC 23001-1:2006 Part 1: Binary MPEG format for XML
    • ISO/IEC 23001-2:2008 Part 2: Fragment request units
    • ISO/IEC 23001-3:2008 Part 3: XML IPMP messages
    • ISO/IEC 23001-4:2017 Part 4: Codec configuration representation
    • ISO/IEC 23001-5:2008 Part 5: Bitstream Syntax Description Language (BSDL)
    • ISO/IEC 23001-7:2016 Part 7: Common encryption in ISO base media file format
    • ISO/IEC 23001-8:2016 Part 8: Coding-independent code points
    • ISO/IEC 23001-9:2016 Part 9: Common encryption of MPEG-2 transport streams
    • ISO/IEC 23001-10:2015 Part 10: Carriage of timed metadata metrics of media in ISO base media file format
    • ISO/IEC 23001-12:2015 Part 12: Sample Variants in the ISO base media file format
  • ISO/IEC 23002 Information technology – MPEG video technologies
  • ISO/IEC 23003 Information technology – MPEG audio technologies
  • ISO/IEC 23004 Information technology - Multimedia Middleware
    • ISO/IEC 23004-1:2007 Part 1: Architecture
    • ISO/IEC 23004-2:2007 Part 2: Multimedia application programming interface (API)
    • ISO/IEC 23004-3:2007 Part 3: Component model
    • ISO/IEC 23004-4:2007 Part 4: Resource and quality management
    • ISO/IEC 23004-5:2008 Part 5: Component download
    • ISO/IEC 23004-6:2008 Part 6: Fault management
    • ISO/IEC 23004-7:2008 Part 7: System integrity management
    • ISO/IEC 23004-8:2009 Part 8: Reference software
  • ISO/IEC 23005 Information technology - Media context and control
    • ISO/IEC 23005-1:2016 Part 1: Architecture
    • ISO/IEC 23005-2:2016 Part 2: Control information
    • ISO/IEC 23005-3:2016 Part 3: Sensory information
    • ISO/IEC 23005-4:2016 Part 4: Virtual world object characteristics
    • ISO/IEC 23005-5:2016 Part 5: Data formats for interaction devices
    • ISO/IEC 23005-6:2016 Part 6: Common types and tools
    • ISO/IEC 23005-7:2017 Part 7: Conformance and reference software
  • ISO/IEC 23006 Information technology - Multimedia service platform technologies
    • ISO/IEC 23006-1:2013 Part 1: Architecture
    • ISO/IEC 23006-2:2016 Part 2: MPEG extensible middleware (MXM) API
    • ISO/IEC 23006-3:2016 Part 3: Conformance and reference software
    • ISO/IEC 23006-4:2013 Part 4: Elementary services
    • ISO/IEC 23006-5:2013 Part 5: Service aggregation
  • ISO/IEC 23007 Information technology - Rich media user interfaces
    • ISO/IEC 23007-1:2010 Part 1: Widgets
    • ISO/IEC 23007-2:2012 Part 2: Advanced user interaction (AUI) interfaces
    • ISO/IEC 23007-3:2011 Part 3: Conformance and reference software
  • ISO/IEC 23008 Information technology - High efficiency coding and media delivery in heterogeneous environments
  • ISO/IEC 23009 Information technology - Dynamic adaptive streaming over HTTP (DASH)
    • ISO/IEC 23009-1:2014 Part 1: Media presentation description and segment formats
    • ISO/IEC 23009-2:2014 Part 2: Conformance and reference software
    • ISO/IEC TR 23009-3:2015 Part 3: Implementation guidelines
    • ISO/IEC 23009-4:2013 Part 4: Segment encryption and authentication
    • ISO/IEC 23009-5:2017 Part 5: Server and network assisted DASH (SAND)
  • ISO/IEC/IEEE 23026:2015 Systems and software engineering - Engineering and management of websites for systems, software, and services information
  • ISO 23081 Information and documentation - Managing metadata for records[Note 3]
    • ISO 23081-1:2006 Part 1: Principles
    • ISO 23081-2:2009 Part 2: Conceptual and implementation issues
    • ISO/TR 23081-3:2011 Part 3: Self-assessment method
  • ISO/IEC 23092:2021 Bioinformatics - Genomic information representation
  • ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
  • ISO 23185:2009 Assessment and benchmarking of terminological resources - General concepts, principles and requirements
  • ISO/TR 23211:2009 Hydrometry – Measuring the water level in a well using automated pressure transducer methods
  • ISO/IEC 23264 Information security — Redaction of authentic data
    • ISO/IEC 23264-1:2021 Part 1: General
  • ISO/IEC 23270:2018 Information technology – Programming languages – C#
  • ISO/IEC 23271:2012 Information technology – Common Language Infrastructure (CLI)
  • ISO/IEC TR 23272:2011 Information technology - Common Language Infrastructure (CLI) - Information Derived from Partition IV XML File
  • ISO/IEC 23289:2002 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Basic services
  • ISO/IEC 23290:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network (PISN) – Mapping functions for the tunnelling of QSIG through H.323 networks
  • ISO 23317:2014 Implants for surgery – In vitro evaluation for apatite-forming ability of implant materials
  • ISO 23328 Breathing system filters for anaesthetic and respiratory use
    • ISO 23328-1:2003 Part 1: Salt test method to assess filtration performance
    • ISO 23328-2:2002 Part 2: Non-filtration aspects
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
  • ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
  • ISO 23539:2005 Photometry - The CIE system of physical photometry
  • ISO 23599:2012 Assistive products for blind and vision-impaired persons - Tactile walking surface indicators
  • ISO 23600:2007 Assistive products for persons with vision impairments and persons with vision and hearing impairments - Acoustic and tactile signals for pedestrian traffic lights
  • ISO 23601:2009 Safety identification - Escape and evacuation plan signs
  • ISO 23603:2005 Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
  • ISO/TR 23605:2009 Technical product specification (TPS) – Application guidance – International model for national implementation
  • ISO/IEC 23651:2003 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – AIT-3 format
  • ISO 23718:2007 Metallic materials – Mechanical testing – Vocabulary
  • ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
  • ISO 23747:2015 Anaesthetic and respiratory equipment – Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
  • ISO/TS 23768 Rolling bearings - Parts library
    • ISO/TS 23768-1:2011 Part 1: Reference dictionary for rolling bearings
  • ISO 23771:2015 Textile machinery – Guide to the design of textile machinery for reduction of the noise emissions
  • ISO/TS 23810:2012 Cardiovascular implants and artificial organs – Checklist for preoperative extracorporeal circulation equipment setup
  • ISO 23813:2007 Cranes – Training of appointed persons
  • ISO 23814:2009 Cranes – Competency requirements for crane inspectors
  • ISO 23833:2013 Microbeam analysis – Electron probe microanalysis (EPMA) – Vocabulary
  • ISO 23853:2004 Cranes – Training of slingers and signallers
  • ISO 23907:2012 Sharps injury protection – Requirements and test methods – Sharps containers
  • ISO 23908:2011 Sharps injury protection – Requirements and test methods – Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • ISO/IEC 23912:2005 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)
  • ISO/IEC 23915:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Diversion
  • ISO/IEC 23916:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Transfer
  • ISO/IEC 23917:2005 Information technology – Telecommunications and information exchange between systems – NFCIP-1 – Protocol Test Methods
  • ISO 23950:1998 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
  • ISO 23953 Refrigerated display cabinets
    • ISO 23953-1:2015 Part 1: Vocabulary
  • ISO/IEC 23988:2007 Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments

Notes

[edit]
  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

[edit]
  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
  3. ^ "ISO 22301:2019". ISO. 5 June 2023.
  4. ^ "ISO 22313:2020". ISO.
  5. ^ "ISO 22315:2014". ISO.
  6. ^ "ISO/TS 22317:2015". ISO.
  7. ^ "ISO/TS 22318:2015". ISO.
  8. ^ "ISO 22319:2017". ISO. 30 October 2020.
  9. ^ "ISO 22320:2018". ISO. 12 July 2019.
  10. ^ "ISO 22322:2015". ISO. 13 November 2015.
  11. ^ "ISO 22324:2015". ISO. 13 November 2015.
  12. ^ "ISO 22325:2016". ISO.
  13. ^ "ISO 22326:2018". ISO.
  14. ^ "ISO 22327:2018". ISO.
  15. ^ "ISO/TS 22330:2018". ISO. 12 July 2019.
  16. ^ "ISO/TS 22331:2018". ISO.
  17. ^ "ISO 22380:2018". ISO.
  18. ^ "ISO 22381:2018". ISO.
  19. ^ "ISO 22382:2018". ISO. 5 December 2018.
  20. ^ "ISO 22392:2020". ISO.
  21. ^ "ISO 22395:2018". ISO. 30 October 2020.
  22. ^ "ISO 22396:2020". ISO.
  23. ^ "ISO 22397:2014". ISO.
  24. ^ "ISO 22398:2013". ISO.
[edit]