M3 submachine gun
| M3 submachine gun | |
|---|---|
.jpg) M3 | |
| Type | Submachine gun |
| Place of origin |  United States |
| Service history | |
| In service | 1942–present |
| Used by | See Users |
| Wars | World War II, Chinese Civil War, Korean War, Bay of Pigs Incident, Vietnam, Falklands War, Desert Storm (limited) |
| Production history | |
| Designer | George Hyde, Frederick Sampson |
| Designed | 1942 |
| Manufacturer | General Motors, others |
| Produced | 1943–1945 |
| No. built | Approx. 680,000 |
| Variants | M3A1, PAM1, PAM2 |
| Specifications | |
| Mass | Template:Lb to kg (M3) Template:Lb to kg (M3A1) |
| Length | Template:In to mm stock extended / 22.8 in (579.1 mm) stock collapsed |
| Barrel length | 8 in (203.2 mm) |
| Cartridge | .45 ACP (11.43x23mm ACP) 9x19mm Parabellum |
| Action | Blowback, open bolt |
| Rate of fire | 350-450 rounds/min cyclic |
| Muzzle velocity | 920 ft/s (280 m/s) |
| Effective firing range | Sights set to 100 yards (91 m) |
| Feed system | 30-round detachable box magazine |
| Sights | Fixed peep sight and blade foresight |
The M3 is an American .45 caliber submachine gun that uses the .45 ACP (11.43x23mm ACP) pistol cartridge, most commonly referred to as a grease gun, owing to its similarity in appearance to the common mechanic's tool. It entered US Army service on December 12 1942 as the United States Submachine Gun, Cal. .45, M3 and began to replace the .45 caliber Thompson series submachine guns: the M1928A1, M1 and M1A1 that were slowly being withdrawn from use. The weapon’s designer was G. Hyde, while F. Sampson – GMC’s Inland Division chief engineer – was responsible for preparing and organizing production. Even at the development stage, the weapon’s design was focused on simplified production, ease of use and the ability to convert the weapon to the 9x19mm Parabellum pistol cartridge.
Development
Initial prototypes carried the experimental designation T15, and after removing the fire safety selector - T20. In 1942 the submachine guns were subjected to a series of military evaluations, after which they received slightly extended stocks. This variant was then approved for production at GMC’s Guide Lamp Division facility. Close to 600,000 weapons were produced by the end of World War II, including approx. 25,000 models chambered for the 9x19mm Parabellum cartridge (which was achieved through swapping out the barrel, bolt and applying an adapter for use with the British 9 mm Sten submachine gun magazines), which were delivered to the OSS in 1944. The OSS also requested approx. 1000 .45-caliber submachine guns with an integral sound suppressor (designed by Bell Laboratories).
Design details
The M3 is an automatic only, blowback-operated firearm (the weapon’s bolt is assisted by two parallel wire-guide action springs) that fires from an open bolt. A spring extractor is located inside the bolt, while the fixed ejector – in the cocking handle assembly. The weapon is striker fired with the firing pin contained inside the bolt, the return springs act as the striker spring. The weapon is secured from accidental firing by closing the spring-loaded ejection port cover, which has a lug that engages notches in the bolt assembly’s surface, locking it in both its forward and rear positions. The firearm is fed from a double-column 30-round detachable box magazine.
The M3 employs metal stamping and pressing, spot welding and welding. The bolt rides on two rods that are simultaneously the return spring guide rods. The weapon has a removable, rifled barrel. A conical flash hider (developed later) could be attached. The fixed iron sights consist of a rear aperture set for firing at 100 yards (approx. 91 m) and a blade foresight. The M3 is equipped with a folding (telescoping) metal wire stock, that can be removed and used to load rounds into the magazine. The stock also features threads at both ends used to attach a bore brush that creates a cleaning rod.
Variants
In December 1944 a modernized version of the M3 was introduced into service known as the M3A1, which has several new features, among them the crank-type cocking mechanism was removed and a recess was machined into the bolt allowing the bolt to be cocked with the user’s finger, the ejection port and ejection port cover were enlarged, a magazine release button cover was added and a magazine loading device was welded to the wire stock. Additionally the bolt latch was changed, the barrel bushing received cuts that assist in barrel removal with the use of the stock, a larger oiler was used and a spare lubricant mount was removed (located at the left side of the cocking lever assembly), replaced with an oiler installed inside the pistol grip. The modifications resulted in a reduced weight and improved reliability; these changes also improved maintenance and field stripping (i.e. to remove the bolt and recoil assembly the user simply has to unscrew the barrel; in the original M3 it was necessary to first remove the trigger guard, then detach the cocking crank assembly from the receiver housing). In 1945 the Guide Lamp factory manufactured close to 15,500 M3A1 submachine guns. Additionally, during the Korean War another 33,000 units were built at the Ithaca Gun Co.
The M3 and M3A1 were officially retired from US service in 1957; however they continued to be used until the mid 1990s by armored vehicle crews and truck drivers.[1] For example, during the Gulf War of 1991, drivers of the 19th Engineer Battalion, attached to the 1st Armored Division, were deployed with the M3A1.
In 1955 production was initiated at the Argentinean FMAP plant in Rosario of the PAM1 submachine gun (an M3 chambered in the 9x19mm Parabellum pistol caliber), and later the PAM2 (PAM1 modernized with the addition of a grip safety).
Users
See also
- Mike Ploog for an M3 troubleshooting maintenance guide.
- MCEM 1 submachine gun, similar weapon with a grip magazine.
References
Bibliography
- Dunlap, Roy F., Ordnance Went Up Front, Samworth Press, 1948.
- Nelson, Thomas B. The World's Submachine Guns, TBN Enterprises, 1963.
- Weeks, John, WWII Small Arms, Galahad Books, 1980.
- Iannamico, Frank A., The U.S. M3-3A1 Submachine Gun, Moose Lake Publishing, 1999.
- Iannamico, Frank A., United States Submachine Guns, Moose Lake Publishing, 2004.
External links
