Jump to content

ALCO DL560C

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 221.153.58.187 (talk) at 14:37, 3 October 2023. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

ALCO DL560C
Type and origin
Power typeDiesel
BuilderALCO , BLW & DLMW (overhauling and rebuilding)
ModelALCO DL560C
Build date1962-
Specifications
Configuration:
​
 • AARC-C
Gauge5 ft 6 in (1,676 mm)
BogiesCo-Co
Fuel typeDiesel fuel
Fuel capacity
  • 1,320.86 US gal (1,099.85 imp gal; 5,000.0 L) (WDM-2)(WDM-3D)
  • 1,585.032 US gal (1,319.815 imp gal; 6,000.00 L) (WDM-3A/2C)(WDG-3A)
Prime moverAlco 251-B,C
Engine type4-stroke V16 diesel
AspirationTurbo-Supercharged
Cylinders16,6
TransmissionDiesel electric
Loco brakeAir
Train brakesAir
Performance figures
Power output
  • 2,600 hp (1,940 kW) (WDM-2)
  • 3,100 hp (2,310 kW) (WDM-3A/2C)
  • 3,100 hp (2,310 kW) (WDG-3A)
  • 3,300 hp (2,460 kW) (WDM-3D)
Career
OperatorsIndian Railways
LocaleIndia[1]

The ALCO DL560C is a series of diesel-electric locomotive with AC electric transmission designed by the American Locomotive Company and produced under license by Banaras Locomotive Works (BLW) Varanasi, India for Indian Railways as their classes WDM-2, WDM-3A/2C, WDM-3D and WDG-3A for operation in India. The locomotive is fitted with a 16-cylinder ALCO 251 B,C diesel engine. In the early 1960s Indian Railways needed a reliable diesel workhorse to gradually replace its steam locomotive fleet. Equal numbers (40 each) of ALCO's DL560C and EMD's G16 were chosen for trials. More locomotives of each of these were purchased for more trials. Indian Railways was keen on producing these locomotives in the country rather than depending on imports. EMD did not agree for a Transfer-of-Technology, while ALCO did. Thus ALCO DL560C was chosen for the job due to its easy maintenance, reliability and simple operation. And from then on vast numbers of this loco in different configurations have been produced and remain the main diesel traction power of Indian Railways.[2]

Indian Versions

There are four main variants of this loco, which are extensively modified for particular needs. They are, as follows:

WDM-2

Main article: Indian locomotive class WDM-2

The first loco of the type DL560C to arrive in India is WDM-2. Initial batches arrived from the ALCO manufacturing facility in ready-to-ride condition. And 12 more arrived from ALCO in, to be assembled kits. This loco remained as the workhorse of Indian Railways in the 20th century. This loco solely can haul 9 passenger and can haul 18 with the help of another WDM-2. This model had a maintenance schedule of 3000 km/10days. Later on, improving the fluid level and bearings, the schedule was increased to 30 days. The gear ratio being 65:18 and having a max speed of 120 km/h. JUMBOS (full-width short hood) and WDM-2A/2B are some of WDM-2s variants with minor modifications. The production began in the late 1960s, and went on till the late 1990s. They are being eventually retired. They belong to series 18xxx, 17xxx and 16xxx.[2]

WDM-3A/2C

Main article: Indian locomotive class WDM-3A

WDM-3A, previously known as WDM-2C, are more powerful than the previous WDM-2 version by 500 hp. The first loco was delivered in 1994. This loco was capable of doing the work of two WDM-2S. They too had a top speed of 120 km/h. The gear ratio is same as that of WDM-2. There are some locomotives whose maximum hp has been tuned close to 3900 hp and named as WDM-3A. They are still[when?] under production. WDM-3C is an upgraded loco from its previous WDM-3A. Their series is 14xxx.[2]

WDM-3D

Main article: Indian locomotive class WDM-3D

This is the latest and the most advanced variant of all the available ALCOs. The WDM-3D are fitted with micro-processors. This variant has enhanced cabin facilities including left hand driving. This loco also has some features borrowed from its mate EMD GT46PAC. Features such as microprocessors to detect wheel slipping and phased manner power supply, monitoring engine parameters are incorporated from the latest EMD GT46PAC. This proved this variant a real success. Serial production began in 2005 and almost all diesel broad gauge sheds were allotted with this loco. The minor variants of this loco include WDM–3E and WDM–3F. They belong to series 11xxx.[2]

WDG-3A

Main article: Indian locomotive class WDG-2/3A
A WDG-3A of Kazipet Junction at Lingampally railway station
13109 'Shakti' WDG-3A Bondamunda at Kamakhya in July 2018 attached with another WDG-3A

WDG-3A, previously known as WDG-2 were designed owing to the problems which arose with WDM-2 on hauling freight. This loco normally hauls freight. The common problems were poor ride quality, lateral oscillations, and poor traction with heavy loads. First loco was manufactured in 1995. The gear ratio is 74:18. This loco has a balancing speed of 69 km/h with a load of 58 BOXN wagons (Max. speed 100 km/h). This variant is being gradually modernized to the level of WDM-3Ds. Some of its minor improvements include WDG-3B, WDG-3C and WDG-3D. Their series are in 14501-14999 and 13000–13665. Last one built for Indian Railway was 13665 rolled out in 2012. Total 1171 were built for Indian Railways and a considerable number were supplied to non Railway customers like thermal power plants, port trusts and steel plants.[2]

WDM-7

Main article: Indian locomotive class WDM-7

They are lower powered (2000 HP instead of 2600 HP) version of the WDM-2. These locomotives were built from 1987 to 1989. A few were at Ernakulam earlier, but later all were transferred to Tondiarpet seen shunting at Chennai Central or for light passenger haulage. Some are at the thermal power station, Chennai.

They were formerly housed at Erode and Golden Rock also. They are reliable and rugged locomotives even though low powered. They can be easily recognized by the lack of grilles on the short hood. Two locomotives are running on a mixture of bio-diesel and diesel. All 15 are still in service.

Export versions

Sri Lanka

WDM-2 - Class M8 In Sri Lanka

Main article: Sri Lanka Railways M8

Eight WDM-2 locomotives were purchased by the Sri Lanka Railways, the state run railroad operator in Sri Lanka in 1996. They were the longest and most powerful locomotives at that time. They were allocated the M8 class. However, some modifications to the appearance were done by SLR. These locomotives belong to road number 841 to 848 and all are still operational.

Bangladesh

Main article: Bangladesh Railway Class 6400

Ten WDM-2 locomotives were purchased by Bangladesh Railway in 2001. They were the most powerful locomotives at that time. They were allocated Class 6400 or BED-26 numbered from 6401 to 6410. All are fitted with air brake and AAR coupling. Unlike their Indian counterparts, these locomotives do not have the dynamic braking system. All locomotives are still in service.

On 27 July 2020 Indian Railways (IR) handed over 10 WDM-3D diesel locomotives to Bangladesh Railways under its “grant assistance” plan. The vehicles cost an estimated ₹600m ($US 8m) to manufacture. [3]

Manufacturers

They were manufactured and designed by ALCO. Now they are licensed produced by BLW and are overhauled and rebuilt by DLMW. The rebuilt locos carry an 'R' behind their serial number.

Users

The locomotive is used by the following zones of Indian Railways:

In addition, DL560Cs were exported to

See also

References

  1. ^ "ALCO locomotives". DLW. 2010. Retrieved 31 March 2015.
  2. ^ a b c d e "Broad Gauge Diesel Locomotives". IRFCA.
  3. ^ "India increases rail connections with Bangladesh". 27 July 2020.
  4. ^ "Sheds and Workshops". IRFCA.
Retrieved from "https://en.wikipedia.org/w/index.php?title=ALCO_DL560C&oldid=1178415513"