route (command)
 The ReactOS route command | |
| Developer(s) | Fred N. van Kempen, Microsoft, IBM, ReactOS Contributors |
|---|---|
| Operating system | Unix-like, OS/2, Microsoft Windows, ReactOS |
| Type | Command |
| License | OS/2, Windows: Proprietary commercial software ReactOS: GPLv2 |
In computing, route is a command used to view and manipulate the IP routing table in Unix-like and Microsoft Windows[1] operating systems and also in IBM OS/2 and ReactOS.[2] Manual manipulation of the routing table is characteristic of static routing.
Implementations
Unix and Unix-like
In Linux distributions based on 2.2.x Linux kernels, the ifconfig and route commands are operated together to connect a computer to a network, and to define routes between computer networks. Distributions based on later kernels have deprecated ifconfig and route, replacing them with iproute2.
Route for Linux was originally written by Fred N. van Kempen.[3]
Syntax
The command-syntax is:
route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
Example
user@linux:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.101.0 192.168.102.102 255.255.255.0 UG 0 0 0 eth0
192.168.102.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.103.0 192.168.102.102 255.255.255.0 UG 0 0 0 eth0
192.168.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.12.1 0.0.0.0 UG 0 0 0 eth0
Microsoft Windows
The command is only available if the TCP/IP protocol is installed as a component in the properties of a network adapter.
Syntax
The command-syntax is:
route [-f] [-p] [-4|-6] [Command [Destination] [mask Netmask] [Gateway] metric Metric if Interface
Parameters
- -f: Clears the routing table
- -p: The route is added to the Windows Registry and is used to initialize the IP routing table whenever the TCP/IP protocol is started (only when used with the add command)
- Command: The command to run (add, change, delete, print)
- -4: Force using IPv4
- -6: Force using IPv6
- Destination: Network destination of the route
- mask Netmask: The netmask (subnet mask) associated with the network destination
- Gateway: The forwarding or next hop IP address over which the set of addresses defined by the network destination and subnet mask are reachable
- metric Metric: Integer cost metric (ranging from 1 to 9999) for the route
- if Interface: The index of the interface over which the destination is reachable
- /?: Command help
The -p parameter is only supported on Windows NT 4.0, Windows 2000, Windows Millennium Edition, and Windows XP. It is not supported on Windows 95 or Windows 98.
IBM OS/2
Syntax
The command-syntax is:
route [-nqv] [COMMAND] [[MODIFIERS] args]
Parameters
- -n: Bypasses translating IP addresses to symbolic host names
- -q: Suppresses all output
- -v: Verbose
- COMMAND: The command to run (add, delete, change, get, monitor, flush)
- -net: <dest> is a network address
- -host: <dest> is host name or address (default)
- -netmask: the mask of the route
- <dest>: IP address or host name of the destination
- <gateway>: IP address or host name of the next-hop router
ReactOS
Syntax
Print the route table:
route print
Add a route:
route add <target> [mask <mask>] <gw> [metric <m>]
Delete a route:
route delete <target> <gw>
See also
Further reading
- Stanek, William R. (2004). Microsoft Windows Command-Line Administrator's Pocket Consultant. ISBN 0-735-62038-5.
- John Paul Mueller (2007). Windows Administration at the Command Line for Windows Vista, Windows 2003, Windows XP, and Windows 2000. John Wiley & Sons. ISBN 978-0470165799.
References
External links
- – 4.2BSD System Manager's Manual
- – Linux Administration and Privileged Commands Manual
- – FreeBSD System Manager's Manual
- – Solaris 11.4 Reference Manual
- route - on technet.microsoft.com