Jump to content

Ainsworth Mill, Breightmet

Coordinates: 53°34′42″N 2°22′16″W / 53.5784°N 2.3710°W / 53.5784; -2.3710
From Wikipedia, the free encyclopedia

Ainsworth Mill
Ainsworth Mill, Breightmet is located in Greater Manchester
Ainsworth Mill, Breightmet
Location in Greater Manchester
Cotton
Mercerising
LocationAinsworth, Bury adjacent to Breightmet, Bolton, Greater Manchester, England
Further ownership
Coordinates53°34′42″N 2°22′16″W / 53.5784°N 2.3710°W / 53.5784; -2.3710
References
[1]

Ainsworth Mill, Breightmet is a mercerising mill near the Breightmet neighborhood of Bolton, Greater Manchester. It was bought by the Lancashire Cotton Corporation in the 1940s as an attempt to develop a cotton finishing presence.

Location

[edit]

Breightmet is a small town 3 km (1.9 mi) to the east on Bolton town centre and 6 km (3.7 mi) west of Bury. The Ainsworth estate though physically attached to Breightment is for administrative purposes in the Metropolitan Borough of Bury. The early name Bolton le Moors described the position of the town amid the low hills on the edge of the West Pennine Moors south east of Rivington Pike (456 m). Breightmet lies on relatively flat land on west of the clough or steep-banked valley through which the Bradshaw Brook flows in a southerly direction towards the River Tonge and then the River Irwell.[2] The geological formation around Breightmet consists of sandstones of the Carboniferous series and coal measures, to the north of Bolton Bury road the lower coal measures are mixed with underlying Millstone Grit.[3]

History

[edit]

The site was in use in 1850. It was reconfigured in 1893. It was driven by a condensing stationary steam engine which required a reservoir or mill lodge to contain water to condense the steam; this was filled in the 1970s.[4] The mill took advantage of the copious soft water to engage in finishing yarn or fabric. The processes involved bleaching, mercerising and dyeing. The industry peaked in 1912 when it produced 8 billion yards of cloth. The great war of 1914–1918 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry.[5] Ainsworth Mill, Breightmet was one of 104 mills bought last by the LCC. It one of the 53 mills that LCC owned in 1950, and was extensively refurbished to provide a mercerising facility. They established a research and quality control laboratory here to service the group and ensure the stability of the colour. Yarn was received from other mills in the group in warp or in hank, and is mercerised, bleached and dyed, then wrapped into hank, cone, quiller pirn, back beam, weaver's beam, cheese or precision wound multiple end cheese as required.[6] On LCC demise, Ainsworth Mill continued in business as a bleaching and dyeing work until the dyeing company that went into liquidation in 2006. The works is derelict, but surveys have been done showing an intention to bring the mill back into industrial use.[4]

Mercerisation

[edit]

Mercerisation is a treatment for cotton fabric and thread that gives fabric a lustrous appearance. The process is applied to materials like cotton or hemp. The process was devised in 1844 by John Mercer of Great Harwood, Lancashire, who treated cotton fibres with sodium hydroxide. The treatment caused the fibres to swell, which in Mercer's version of the process shrunk the overall fabric size and made it stronger and easier to dye. In 1890 H. A. Lowe held the yarn under tension during treatment. This prevented shrinking and gave the yarn or resulting fabric a lustrous appearance.[7][8] Mercerisation alters the chemical structure of the fibre, inter-convertings from alpha-cellulose to a thermodynamically more favorable beta-cellulose polymorph thus swelling of the cell wall. This increases the surface area and reflectance, and gives the fibre a softer feel.[9]

Architecture

[edit]

A ten bay three storey early mill, with triple pitch roof and one internal stair column. The engine house is separate and possesses a square chimney.

Owners

[edit]
  • Blackshaw Dyeing and Finishing Co
  • Ainsworth Mercerising Co
  • Lancashire Cotton Corporation (1930's-1964)

See also

[edit]

References

[edit]
  1. ^ LCC 1951
  2. ^ Farrer, William; Brownbill, J, eds. (1911), "Great Bolton", A History of the County of Lancaster: Volume 5, British History Online, pp. 243–251, retrieved 6 December 2009
  3. ^ Farrer, William; Brownbill, J, eds. (1911), "Bolton le Moors", A History of the County of Lancaster: Volume 5, British History Online, pp. 235–243, retrieved 6 December 2009
  4. ^ a b http://pad-planning.bury.gov.uk/DocExplorer/231/00/03/38/00033804.pdf Archived 2011-08-23 at the Wayback Machine Ainsworth Mill, Bury New Road. Breightmet, Bolton BL2 6QL. 1.0 Brief. To identify potential hazards relating to the proposed development. The construction of the reservoir gave rise to the landmark lawsuit of Rylands v Fletcher which is still a seminal case in English legal history.
  5. ^ Dunkerley 2009
  6. ^ LCC 1951, p. 36
  7. ^ J. Gordon Cook (1984). Handbook of Textile Fibres: Volume I: Natural Fibres. Woodhead. p. 68. ISBN 1-85573-484-2.
  8. ^ Beaudet, Tom (1999). "What is Mercerized cotton?". FiberArts.org. Archived from the original on 5 December 2006. Retrieved 3 January 2007.
  9. ^ Textile Technology: Cotton/Kenaf Fabrics: a Viable Natural Fabric, P. Bel-Berger, et al. Journal of Cotton Science, 3:60-70 (1999). The effects of different fabric treatments such as enzymes, bleaching, and mercerization were compared and measured for softness of hand. Mercerisation dramatically improved the softness of hand for both fabrics."

Bibliography

[edit]
[edit]