Jump to content

FGC-9

From Wikipedia, the free encyclopedia
(Redirected from FGC9)

FGC-9
TypeSemiautomatic carbine
Place of originGermany
Service history
WarsMyanmar civil war (2021–present)
Production history
DesignerJacob Duygu (JStark1809) of Deterrence Dispensed[1]
Designed2018–2020
Produced2019–present
Variantssee variants
Specifications
Mass2.1 kg (4 lb 10.1 oz) without magazine
Length520 mm (20.5 in)
Barrel length114 mm (4.5 in)
Cartridge9×19mm
ActionClosed bolt blowback action
Feed systemGlock magazine, including custom extended variants
SightsPicatinny rail

The FGC-9 is a 3D-printable, semi-automatic, pistol-caliber carbine. The firearm was first designed and manufactured between 2018 and 2020 by Jacob Duygu, a Kurdish German[1][2] gun designer known by the pseudonym "JStark1809".[3][4] In April 2021, a "MkII" revision was released. As of 2024, the FGC-9 is "by far" the world's most common 3-D printed gun, used by insurgents, militia members, terrorists, and drug traffickers in "at least 15 countries".[5] The gun's most prominent promoter and co-designer is "Ivan The Troll," a man identified as John Elik in legal documents.[6][5]

Released with accompanying documentation to aid construction, assembly, and the home manufacture of suitable ammunition, the FGC-9's design generally circumvents the global regulation of firearm parts by avoiding regulated parts in favor of off-the-shelf materials. Though the majority of the firearm is 3D-printable, its pressure-bearing components are metal parts that may be purchased or homemade. The total cost of production, assuming the builder owns a 3D printer, is less than US$500.[7][8][9][10]

Etymology

[edit]

The gun's name is an acronym for "Fuck Gun Control", where the "9" references its 9mm cartridge.[11]

Origin

[edit]

The FGC-9 was originally designed and manufactured between 2018 and 2020 by JStark1809, a pseudonymous German-Kurdish[2] gun designer, with contributions from the "guerrilla 3D-gun file development group" Deterrence Dispensed, and was released on March 27, 2020. The design is based on an earlier 3D printable firearm, the Shuty AP-9 pistol by Derwood.[12] Where the "Shuty" relied on several factory-made or machined gun parts (like the barrel) in order to be completed, the FGC-9 made ergonomic and mechanical changes to accommodate builders without access to commercial gun parts or machine shops. These changes and documentation honor the mutual influence of Defense Distributed's Liberator and Philip Luty's even earlier SMG designs.[13]

Cross section of the FGC-9 design.


The FGC-9 is designed with Europeans in mind; fasteners and build materials use the metric standard and are available from hardware stores. The magazine can be 3D printed, and the entire design works without needing any regulated, commercial gun parts. The FGC-9's barrel can be completed in several ways, including the easily adopted method of electrochemical machining.[14][15]

Mark II

[edit]
Drawing of the FGC-9 MkII with its features highlighted

An updated design, the MkII, was first announced on October 23, 2020 by En Bloc Press.[13] It was released on April 16, 2021 on DEFCAD and Odysee by user "The Gatalog".[16] The updated weapon uses a H&K MP5 style charging handle, an improved electro-chemical machining process to make the barrel, and some ergonomic improvements as well. The release was the final package in a string of multiple smaller releases, which included the improved barrel ECMv2.0 process, and the Menendez Mag v2.0, and the Common Sense Fire Control Group AR-15 printable trigger, all created by Ivan The Troll in preparation for the FGC-9 MkII release.[17]

Modifications

[edit]
The FGC-9 MKII Stingray

Due to the open-source nature of the FGC-9, there have been many packages released that alter the configuration, caliber, ergonomics, and other legally-restrictive qualities of the base-model firearm. These are all available through a wide variety of channels, all with different levels of testing, and allow the end user to customize their weapon as needed. One very common branch is replacing the buttstock with an ATF-approved pistol brace, in order for U.S. citizens to comply with NFA rifle and pistol requirements. Another common branch is replacing the barrel with a 16-inch (41 cm) barrel in order to comply with U.S. minimum barrel length requirements, in addition to adding an extended handguard to replace the default one. The firearms hobbyist and instructor QueerArmorer created a version of the top rail for use in Myanmar by rebels fighting with limited access to optics in the Myanmar civil war, however its use was limited as another team from Deterrence Dispensed developed printable iron sights that allowed for more flexibility.[18]

Variants

[edit]
Render of the FGC-9 MKII Stingray
The Features, Technical Specfications and drawing of Partisan-9
Cross section of the Partisan-9 Design
Render/STL Preview of the Nutty 9
Cross section of the Nutty 9
The Technical Specfications and drawing of The Urutau
Name Date made public Designer
FGC-9 MkII[19][16][20]

April 16, 2021 JStark1809(DetDisp), IvanTheTroll(DetDisp), 3socksandcrocs(DetDisp)
  • Updated design with an H&K MP5 style charging handle.
  • Released to work with a string of smaller releases, including an improved barrel making process and V2 Menendez Mag. Includes the "ButWhatAboutAmmo" tutorial for fabricating ammunition.
FGC-9 MKII Stingray[21][22][23]

June 18, 2022 hotsauce
Partisan-9[25][26][27][28]

February 3, 2023 ImmortalRevolt, Deterrents Dispensed / The Gatalog
  • Based on the FGC-9 MkII.
  • Has a ported barrel for integral suppression, similar to the MP5SD. Uses an improved ECM process to create the barrel.
  • Features a folding stock and buffer tube.
FGC-9 MKII Bufferless[29][30][31] Bufferless version with the bolt placed mostly forward similar to Mussy's WTF-9
FMGC-01[32][33] Bufferless select fire variant that uses Sten magazines instead of Glock's
Nutty-9[34][35][36][37][38][39][40][41]

July 15, 2024 TooAceForThisShit, Joe.Dirt, Ruby Grace Builds, NotThatTimmyHicks, IamArizona, DetDisp, The Gatalog, Black Lotus Coalition
  • an improved bolt design consisting of nothing more than four nuts and two bolts screwed into a printed connector piece, which eliminates the requirement for welding, significantly reducing both build costs and the required skill of the builder. This innovation removes the necessity of a welding machine from the construction process, making it simpler and more cost-efficient.
  • Comes in metric and imperial standards
  • Can use a Glock barrel or a custom made barrel like the original FGC-9
The Urutau[42][43][44][45][46][47][48][49]

August 20, 2024 Joseph The Parrot, A.K.A. Zé Carioca
Bullpup variant which uses a telescoping bolt, a 3D printed fire control group/trigger designed from the ground up and CZ Scorpion magazines, notable for its quality documentation wriiten by RSmith28. While most of the underlying mechanics of The Urutau are comparable to the FGC-9, all parts were significantly redesigned. All parts are made from easily accessible, less-firearm-related components that improve supply chain resilience and enhance the builder's operational security when sourcing materials. The Urutau features a bolt designed to eliminate any welding requirements, eliminating the need for welding hardware and reducing the initial price by roughly $100, depending upon the builder's location. The estimated minimum cost to construct a Urutau stands at around $500 for the initial gun, including printer and hardware, and $200 for each subsequent gun. Aside from the ejection port, the entire gun is ambidextrous. The controls are all extremely basic so that non-English speakers with little firearm experience may intuitively understand how to use them. In addition to the manual safety mechanism, the Urutau incorporates safety features to manage the risk of an out-of-battery detonation. The hammer's geometry is designed to ensure that it cannot make contact with the firing pin unless the bolt is in battery. In the unlikely event of an out-of-battery detonation, a specially engineered channel redirects gasses upwards and away from the user, enhancing safety and minimizing the risk of injury.

Materials

[edit]
Disassembled components of the FGC-9

The upper and lower receivers of the FGC-9 are fully 3D-printed, as are its pistol grip and stock. Its magazine, based on the Glock magazine design, may also be printed. For the MkI, an AR-15 or modified airsoft trigger system is needed for the fire control. In the MkII release, the developers released a package to 3D-print the AR-15 trigger. The barrel can be rifled polygonally through electrochemical machining. Some designers have estimated the tooling to complete the FGC-9, including the price of the printer (~$200) and electrochemical machining equipment (~$100), at $500.[50][better source needed] JStark1809 himself estimated the project to take 1.5 to 2 weeks to build.[51]: 12:34 

Availability

[edit]

The gun's 3D-printing files were released under an open-source license on DEFCAD by JStark1809, and then uploaded to various hosting platforms by Deterrence Dispensed such as Odysee, a free-speech blockchain based video, audio and file hosting site using the LBRY protocol.

According to Rajan Basra, a professor at International Centre for the Study of Radicalisation and a postdoctoral researcher in the Department of War Studies at King's College London, the FGC is particularly popular among far-right groups due to the sharing of its instructions in extremist internet forums.[52]

Promotion

[edit]
Ivan the troll firing a 9mm round using his FGC-9 MKII
FGC-9 MkII Slow motion firing footage filmed by Ivan the troll

Ivan the Troll, the one of the head/admin of Deterrence Dispensed/Gatalog and FGC-9 co-designer, actively promotes the use of the gun in podcasts[53][54][55][56][57][58][59][60][61][62][63][64][65][66]and YouTube videos.[67][68][69][70][71][72] According to the Rajan Basra, a professor at International Centre for the Study of Radicalisation and a postdoctoral researcher in the Department of War Studies at King's College London, Nathan Mayer, a security researcher from the United States, and New York Times, "court documents, corporate records and information posted on his social media accounts" link Ivan to one John Elik, a 26-year-old licensed gunmaker in Illinois. [73] [5]

Investigations

[edit]
JStark1809 Firing his FGC-9

Jake Hanrahan of Popular Front interviewed JStark1809 about the FGC-9 and 3D printed guns in November 2020.[51] JStark1809 stated that he had no background in engineering, taught himself CAD, and learned what he needed through widely-available resources on the internet. With his rudimentary operation, he showed how to manufacture an FGC-9 in two weeks or less. He shot the gun in a forest and demonstrated its reliability and rapid firing rate. JStark1809 described his absolutist belief in the right to keep and make arms, as well as his desire to make the weapons widely available in order to protect human rights. Hanrahan described him as "one of the most dangerous people" he had ever met and criticized authorities for underestimating the power of 3D-printed guns.[51]

Der Spiegel reported in October 2021 that British financial services had provided clues on the identity of JStark1809 to the Federal Criminal Police Office, and they identified a 28-year-old man in Völklingen who went by "Jacob D." Police had raided his home that June, though they found no weapons and did not take him into custody. Two days after the raid, he was found dead in his car in front of his parents' home in Hannover. Coroners determined the cause of death to be a heart attack and ruled out foul play.[3]

In October 2023, a report published by the International Centre for the Study of Radicalisation and Political Violence named JStark1809 as Jacob Duygu, a German national born to Kurdish parents who arrived as refugees from Southeast Turkey in the 1990s. The report claims he is the author of hundreds of anonymous internet posts, but does so using statistical inference from language patterns rather than direct evidence.[1] The recovered posts are xenophobic, racist, antisemitic, and misogynistic, and endorse anti-State violence. Direct evidence of Jacob's life as an incel, and his desire to travel to Southeast Asia and commit suicide, has been found in episode 5 of investigative journalist Naama Kates' podcast The Incel Project.[74][75]

Users and use

[edit]

According to the New York Times, from 2021-2024, the FGC-9 has been used by or found in possession of "paramilitaries in Northern Ireland, rebels in Myanmar and neo-Nazis in Spain", and has become a "staple" weapon of "the world's far-right extremists". Improvised factories for making the gun have been found in Australia, France and Spain. As of September 2024, an FGC-9 has not been linked to a homicide by law enforcement agencies, but this may be "because traditional forensic techniques are not always reliable on homemade weapons".[5]

  •  Myanmar: MkII and MkII Stingray variant used by rebel forces in the Myanmar civil war (2021–present).[76][77][78]
  • Complete and incomplete models have been recovered by police forces in the European Union, United Kingdom,[79] Australia,[80] New Zealand,[81][82] Canada,[83] the United States,[84] Taiwan,[85] and Iceland[86]
  • Dissident republican paramilitaries: MkII variant seen in the hands of a member of the dissident Irish republican paramilitary Óglaigh na hÉireann during a parade in Easter 2022.[87][88]
  •  Finland: A Finnish man was sentenced to prison for one year four months because he manufactured at least 8 guns.[89] Also in Finland, three men were convicted in relation to the production of 3D-printed weapons.[90]
  •  United Kingdom: Matthew Cronjager, a British neo-Nazi, was arrested after attempting to pay an undercover police officer in exchange for the manufacture of an FGC-9. His goal was to recruit and arm a militia, targeting Jews, gay people, Muslims and others, and to overthrow the UK government. He was convicted and jailed for more than 11 years.[5] In the UK, possession and sharing of a FGC-9 instruction manual is a terrorist offense.[5]

See also

[edit]

References

[edit]
  1. ^ a b c Rajan Basra (19 October 2023). Behind the Mask: Uncovering the Extremist Messages of a 3D‑Printed Gun Designer (PDF) (Report). International Centre for the Study of Radicalisation and Political Violence. Retrieved 2 November 2023.
  2. ^ a b "A clip from jake hanrahan's interview with jstark". Archived from the original on 27 March 2022.
  3. ^ a b Baumgärtner, Maik; Epp, Alexander; Lehberger, Roman; Höfner, Roman (12 October 2021). "The Shadowy, Homemade Weapons Community Just Keeps on Growing". Der Spiegel. Archived from the original on 8 April 2023. Retrieved 10 December 2021.
  4. ^ "Jacob Duygu: Incel who mysteriously died unmasked as creator of world's most popular 3D-printed gun". Sky News. 2 March 2024. Archived from the original on 2 March 2024. Retrieved 24 March 2024.
  5. ^ a b c d e f Dearden, Lizzie; Gibbons-Neff, Thomas (10 September 2024). "He's Known as 'Ivan the Troll.' His 3D-Printed Guns Have Gone Viral". New York Times. Retrieved 10 September 2024.
  6. ^ "Lawsuits, Rivalries, and Trolls: Examining the Behaviour of the 3D-Printed Gun Movement". 10 September 2024.
  7. ^ JStark1809 (16 April 2021). FGC 9 Mk II Guide. Retrieved 16 June 2023.{{cite book}}: CS1 maint: numeric names: authors list (link)
  8. ^ "BUNDLE! – FGC9 MKII Kit - MAF Corp". 30 June 2021.
  9. ^ "FGC9 MK II Build Kit".
  10. ^ "FGC9 MK II Build Kit".
  11. ^ "FGC9 File Drop, CTRL+Pew". CTRL+Pew. 5 April 2020. Archived from the original on 6 April 2023. Retrieved 26 October 2020.
  12. ^ "Derwood's AP9 vs JStark1809′s FGC9". Programming and Potatoes. 2 May 2020. Archived from the original on 25 April 2021. Retrieved 25 April 2021.
  13. ^ a b "The FGC-9 MkII: An Early Look With JStark1809". En Bloc Press. 23 October 2020. Archived from the original on 7 December 2020. Retrieved 26 October 2020.
  14. ^ "The FGC-9 Fulfills the Promise of 3D Printed Guns". En Bloc Press. 28 March 2020. Retrieved 26 October 2020.
  15. ^ ImproGuns (13 August 2019). "Make a Factory Quality 9mm Rifled Barrel in your Kitchen Using Salt Water and Electricity (ECM)". TheFirearmBlog. Archived from the original on 11 April 2023. Retrieved 21 April 2023.
  16. ^ a b "FGC-9 MKII". Odysee. Retrieved 19 April 2021.
  17. ^ "FGC-9 MkII File Package Release". The Kommando Blog. 17 April 2021. Archived from the original on 25 April 2021. Retrieved 25 April 2021.
  18. ^ Ditto Nation Episode 2, "3D Printed Firearm Culture"Archived December 15, 2023, at the Wayback Machine
  19. ^ JStark1809 (16 April 2021). FGC 9 Mk II Guide. Retrieved 16 June 2023.{{cite book}}: CS1 maint: numeric names: authors list (link)
  20. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  21. ^ "FGC-9 MKII - 'Stingray'".
  22. ^ M, Dan (18 December 2022). "FGC-9 MKII Stingray 3D Printed". 3D Gun Builder. Retrieved 18 January 2024.
  23. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  24. ^ SSTF လူငယ်တွေဦးဆောင်ပြီး FGC 9 ကာကွယ်ရေး ပြောင်းရှည်သေနတ်ထုတ်လုပ်, 10 April 2023, retrieved 18 January 2024
  25. ^ "Partisan 9 3D Printed". 7 February 2023.
  26. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  27. ^ "The Partisan 9". Odysee. Retrieved 21 December 2023.
  28. ^ "File Drop: Partisan-9 » CTRL+Pew". 24 February 2023.
  29. ^ "FGC 9 -Mk2 Bufferless". YouTube. 15 March 2024. Archived from the original on 15 March 2024. Retrieved 24 March 2024.
  30. ^ "FGC-9 Bufferless". odysee.com. 24 March 2024. Archived from the original on 24 March 2024. Retrieved 24 March 2024.
  31. ^ "Update: 321 block bolt bufferless FGC-9 : fosscad". 18 November 2021. Archived from the original on 18 November 2021. Retrieved 24 March 2024.
  32. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  33. ^ "The FMGC-01- A compact select-fire PCC for Europe". Impro Guns. 30 January 2023. Archived from the original on 30 January 2023. Retrieved 24 March 2024.
  34. ^ "The Nutty 9".
  35. ^ https://x.com/DrDeath1776/status/1812517755905855639 [bare URL]
  36. ^ "The Nutty 9".
  37. ^ https://x.com/ModeratorGage/status/1812517347221287260 [bare URL]
  38. ^ "Nutty 9 assembly guide". 13 July 2024.
  39. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  40. ^ "Conversation with Nutty 9 Co-Developer TooAceForThis[redacted]". YouTube. 15 April 2024. Archived from the original on 15 April 2024. Retrieved 15 April 2024.
  41. ^ "Printing Terror: An Empirical Overview of the Use of 3D-Printed Firearms by Right-Wing Extremists". 28 June 2024.
  42. ^ "Urutau Documentation". 20 August 2024.
  43. ^ "The Urutau". Odysee. Retrieved 27 August 2024.
  44. ^ https://armamentresearch.com/wp-content/uploads/2023/11/ARES-Research-Report-No-8-Desktop-Firearms-2023-Update-EARLY-ACCESS.pdf
  45. ^ "The Brazilian JStark - ZÃ Carioca | 3DPGP EP19".
  46. ^ "Conversation with Urutau Dev: ZÃ Carioca". YouTube. 16 December 2022.
  47. ^ "ZÃ Carioca". YouTube. 9 April 2023.
  48. ^ "Yannick Veilleux-Lepage, PhD on LinkedIn: About an hour ago, the files for the Urutau hybrid pistol-caliber carbine..."
  49. ^ "Urutau". 27 February 2023.
  50. ^ "DIY Guns, Part 3: 3D Gun Making, Advanced Builds, Processes and Techniques". The Truth About Guns. 15 May 2020. Archived from the original on 8 April 2023. Retrieved 10 December 2020.
  51. ^ a b c Popular Front (23 November 2020). Plastic Defence: Illegal 3D Printed Guns in Europe. Youtube. Archived from the original on 7 April 2023. Retrieved 21 April 2023.
  52. ^ Vallance, Chris (9 November 2022). "3D printed guns: Warnings over growing threat of 3D firearms". BBC News. Archived from the original on 14 April 2023. Retrieved 9 November 2022.
  53. ^ "This Week in Guns". Spotify.
  54. ^ "This Week in Guns Archives".
  55. ^ "This Week in Guns". YouTube.
  56. ^ https://x.com/NaviGoBoom/status/1841305313388974422
  57. ^ "Ivan the Troll | 3DPGP EP4".
  58. ^ "058: Ivan the Troll & Print, Shoot, Repeat! - 3D Printed [Bead] Blasters!".
  59. ^ "91. Plastikov and the 3D Printed Gun Renaissance".
  60. ^ "058: Ivan the Troll & Print, Shoot, Repeat! - 3D Printed [Bead] Blasters! -".
  61. ^ "The Ghost Gun: An interview with 'Ivan the Troll'".
  62. ^ "Unregistered 144: CTRLPew, Jeff Rodriguez, and Ivan | Unregistered Podcast with Thaddeus Russell". 15 December 2020.
  63. ^ "5: Come and Print It – Ivan the Troll - Guns N' Bitcoin Newsletter (Podcast)". 16 September 2019.
  64. ^ "Gun Printing 101 with IvanTheTroll (Podcast/Transcript!)". 31 January 2021.
  65. ^ "Season 2 Episode 1 : Ivan the Troll". YouTube. 10 September 2022.
  66. ^ "Season 2 Episode 9 : Ivan the Troll".
  67. ^ "IvanPrintsGuns". Odysee.
  68. ^ "IvanPrintsGuns". YouTube.
  69. ^ "Ivan's CAD Streams".
  70. ^ https://x.com/navigoboom
  71. ^ "Get more from Ivan on Patreon".
  72. ^ "Fudd Blasters". YouTube.
  73. ^ "Lawsuits, Rivalries, and Trolls: Examining the Behaviour of the 3D-Printed Gun Movement". 10 September 2024.
  74. ^ "JStark's Incel Podcast Interview". ddlegio.com. 11 July 2024. Retrieved 3 August 2024.
  75. ^ Naama Kates (September 2019). "5: JBW & ASD, SEAmaxxing Manlet". Spotify.com (Podcast). Retrieved 3 August 2024.
  76. ^ "အကြမ်းဖက်အဖွဲ့အစည်းဖြစ်သော NUG ၏ စေခိုင်းချက်အရ အကြမ်းဖက်လုပ်ငန်းများ ဆောင်ရွက်နေသော NLD ပါတီဝင် မောင်ကျော်(ခ) ဖြိုးဇေယျာသော်၏ ထွက်ဆိုချက်အရ ဆက်စပ်တရားခံများနှင့် လက်နက်/ခဲယမ်းများ ထပ်မံဖမ်းဆီးရမိ". Office of the Commander in Chief of Defense Services, Myanmar (in Burmese). 20 November 2021. Archived from the original on 21 April 2023. Retrieved 11 June 2022.
  77. ^ Hanrahan, Jake. "Twitter thread with a collection of photos of Myanmar rebels armed with FGC". Archived from the original on 5 May 2022.
  78. ^ "SSTF လူငယ်တွေဦးဆောင်ပြီး FGC 9 ကာကွယ်ရေး ပြောင်းရှည်သေနတ်ထုတ်လုပ် - YouTube". YouTube. 21 October 2023. Archived from the original on 21 October 2023. Retrieved 24 March 2024.
  79. ^ "Men built viable 3D printed sub-machine guns, trial hears". BBC News. 15 February 2023. Archived from the original on 5 April 2023.
  80. ^ Two 3D-printed submachine guns seized by NSW Police | 7NEWS, June 2021, archived from the original on 18 April 2023, retrieved 2 June 2022
  81. ^ Kapitan, Craig (7 November 2021). "Gang member accused of having 3D-printed semi-automatic weapon". NZ Herald. Archived from the original on 7 April 2023. Retrieved 11 June 2022.
  82. ^ Robitzski, Dan (19 April 2021). "Police Raided Factory Churning Out Black Market 3D Printed Weapons". Futurism. Archived from the original on 9 April 2023. Retrieved 11 June 2022.
  83. ^ MacIsaac, Alex (28 February 2023). "Nova Scotia police dismantle 3D gun manufacturing operation; man charged". CTV News Atlantic. Archived from the original on 20 March 2023. Retrieved 3 March 2023.
  84. ^ Shaffer, Josh (26 April 2023). "Soldier who sought to 'physically remove' minorities from NC faces years in prison". The News and Observer. Retrieved 1 May 2023.
  85. ^ Jiansheng, Lin (17 January 2023). "國內首見3D列印具殺傷力長槍 嘉義嫌網購材料自行組裝". Taiwan Public Television Service Foundation (in Chinese (Taiwan)). Retrieved 1 May 2023.
  86. ^ Tómas, Ragnar (29 September 2022). "Semi-Automatic Weapons Seized During Domestic-Terror Plot Raid". Iceland Review. Retrieved 1 May 2023.
  87. ^ Reinisch, Dieter (19 April 2022). "Opinion: Dissident Republican ÓNH issued a warning to Loyalists - what does this mean?". TheJournal.ie. Archived from the original on 8 April 2023. Retrieved 2 June 2022.
  88. ^ Mooney, John (27 April 2022). "Security services investigate 3D-printed gun at Republican event". The Times. Archived from the original on 1 May 2022.
  89. ^ "Tampere | Mies valmisti aseita 3d-tulostamalla "asetehtaassa", tuomittiin ehdottomaan vankeuteen". Helsingin Sanomat (in Finnish). 6 July 2023. Retrieved 22 July 2023.
  90. ^ "Finnish neo-Nazis used 3D printer to make guns in preparation for 'race war'". The Guardian. 31 October 2023. Retrieved 1 November 2023.
[edit]
Wikimedia Commons has media related to FGC-9.
Retrieved from "https://en.wikipedia.org/w/index.php?title=FGC-9&oldid=1257292804"