Figure skate
Figure skates are a type of ice skate used by figure skaters. The skates consist of a boot and a blade that is attached with screws to the sole of the boot. Inexpensive sets for recreational skaters are available, but most figure skaters purchase boots and blades separately and have the blades mounted by a professional skate technician.
History
During the 19th century, new forms of ice skates were developed to allow for even more control and safer gliding. Specific figure skates were created in response to the rise of figure skating's popularity in the 19th century, coinciding with the beginnings of formalized competitions such as the World Figure Skating Championships. The name "figure" skating arises from the compulsory portion of the competition, dropped in the 1990s, requiring skaters to trace out precise figures on the ice, including perfect figure 8 circles.[1] Figure skates are now manufactured with extreme precision for use in competitive sports. Blades are specifically designed to include various types of toe picks that allow for skaters to reach new heights for jumps and spins, depending on the skater's level.[2]
Boots
Figure skating boots are traditionally made by hand from many layers of leather. The design of figure skating boots changed significantly during the 20th century. Old photographs of skaters such as Sonja Heine from the 1920s and 1930s show them wearing thin, supple boots reaching to mid-calf. Modern skating boots, on the other hand, are extremely rigid to support the foot and ankle in jumps, and are cut much lower—just over ankle height—to allow the foot to flex. Because the stiffness of the boots makes good fit essential, many skaters either order custom boots or have their boots "bumped out" over pressure points by a skate technician.
In recent[clarification needed] years, boots made of synthetic materials with heat-modifiable linings have become popular with many skaters because they combine strength with lighter weight than leather boots, and are easier to "break in." The latest development in boot technology is a boot that is hinged at the ankle to provide lateral support while allowing more flexibility. Boots used in ice dance are usually slightly lower in the back to allow for greater bend in the ankle. Some boots also come with a flexible elastic back.
The typical colors for boots are black for men and white for women, although other colors are available.
Blades
Figure skates differ most visibly from hockey skates in having a set of large, jagged teeth called toe picks on the front of the blade. The toe picks are used primarily in jumping and footwork, and should not be used for stroking or spins. Toe pick designs have become quite elaborate and sometimes include additional picks on the sides of the blade, often referred to as a k-pick.
The skate blades are typically made of tempered carbon steel, coated with a high-quality chrome. Lightweight aluminum and stainless steel blades are becoming more popular with skaters. Blades are about 3/16 inch (4 mm) thick and may have a slightly tapered cross-section. There are different blades for different levels of skaters which often correspond to a skater's age, size and skill level. Blades for advanced skaters often have larger toe picks and different curves than blades for beginner, intermediate and recreational levels.[3]
When viewed from the side, the blade of a figure skate is not flat, but curved slightly, forming an arc of a circle with a radius of 180-220 cm. This curvature is referred to as the rocker of the blade. The sweet spot of the blade is below the ball of the foot.[4] This spot is usually located near the stanchion of the blade, and is the part of the blade where all spins are spun on.
The blade is also hollow ground; a groove on the bottom of the blade that creates two distinct edges, inside and outside. In figure skating it is always desirable to skate on only one edge of the blade, never on both at the same time (which is referred to as a flat). The apparently effortless power and glide across the ice exhibited by elite figure skaters fundamentally derives from efficient use of the edges to generate speed.
Ice dancers' and synchronized skaters' blades are about an inch shorter in the rear than those used by skaters in other disciplines, to accommodate the intricate footwork and close partnering in dance. They also possess a smaller pick near the bottom to allow for better edge-work and less focus on jumping.
Blade types
Various specialty blade types exist, including:
- Tapered figure skating blades have a design which causes them to be thicker at the front near the toepicks and thinner at the tail of the blade; therefore, the edges are not parallel.
- Side honed figure skating blades have a concave design which causes them to be thicker at the stanchions and the edge stripe and thinner in between. They are easily recognizable because they cause reflections to be inverted.
- Parabolic figure skating blades were first introduced by HD Sports[citation needed] in order to employ new scientific developments in the creation of figure skating blades. The middle section of parabolic blades is thinner than that of normal blades, while both ends are typically wider than those of regular blades.[5] This translates into less steel and a lighter blade overall. Their design is meant to improve skaters' blade stability, footwork, and edges.
References
- ^ "Why Is Figure Skating Called "Figure Skating?". About.com.
- ^ Formenti, F.; Minetti, A.E. (2007). "Human locomotion on ice: the evolution of ice-skating energetics through history". Journal of Experimental Biology. 210 (Pt 10): 1825–1833. doi:10.1242/jeb.002162. PMID 17488946.
- ^ "Figure skating blades". Go Figure Skating.
- ^ "Figure skating equipment". Olympic.org. Archived from the original on 2009-03-12.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ "Parabolic blades". Retrieved 2008-02-25.