Gillingham railway station (Dorset)
Gillingham (Dorset) | |
|---|---|
| General information | |
| Location | North Dorset |
| Managed by | South West Trains |
| Platforms | 2 |
| Other information | |
| Station code | GIL |
| History | |
| Original company | Salisbury and Yeovil Railway |
| Pre-grouping | London and South Western Railway |
| Post-grouping | Southern Railway |
| Key dates | |
| 1859 | Line opened from Salisbury |
| 1860 | Line extended westwards |
| 1967 | Line singled |
Gillingham (Dorset) railway station is in Gillingham (pronounced /ˈɡɪl[invalid input: 'ɨ']ŋəm/ with a hard "G") in Dorset, England. It opened in 1859 on the London Waterloo to Exeter line 105 miles (169 km) from London, and is managed by South West Trains.
History
On 3 April 1856 Miss Seymour, sister of the company’s chairman, dug the first ceremonial sod for the Salisbury and Yeovil Railway (S&YR) at Gillingham. Three years later, on 2 May 1859, the railway from Salisbury opened to Gillingham, and was completed to Hendford station at Yeovil on 1 June 1860. The station was close to the town centre. The main offices and goods shed were on the north side of the line, further sidings to serve a brickworks were added on the other side of the line, and a signal box opened in 1875. Trains were provided for the S&YR by the London and South Western Railway (LSWR), which bought out the smaller company in 1878. In the twentieth century the LSWR operated motor bus services from Gillingham station to Mere, Zeals and Shaftesbury.[1]
In 1923 the LSWR became part of the Southern Railway, which in turn was nationalised in 1948 to become the Southern Region of British Railways. A new signal box was opened on 28 April 1957, but on 5 April 1965 public goods services were withdrawn. Three years later a fertiliser distribution depot was opened in the old goods yard (it closed in 1993). The line had been transferred to the Western Region in 1963, and through trains beyond Exeter St Davids were soon diverted along other routes. The line was reduced to just a single track on 1 April 1967 with a passing loop retained at Gillingham.[1] Initially the single-track sections were 7-mile (11 km) westwards to Templecombe and 19-mile (31 km) eastwards to Wilton, but the latter was shortened to 9-mile (14 km)[2] in 1986.[1]
| Preceding station | Historical railways | Following station | ||
|---|---|---|---|---|
| Semley | London and South Western Railway London Waterloo to Devon and Cornwall |
Templecombe | ||
Description
The main offices, designed by Sir William Tite stand on the north side of the line.[1] The track serving this platform is signalled for trains to run in either direction so most trains use this platform unless two need to pass. The southern platform, which is reached by a footbridge, is then used for the westbound train. The signal box is at the west end of the station by the end of this platform.[2]
Services
South West Trains operate hourly throughout most of the week between Exeter St Davids, Gillingham, Salisbury and London Waterloo station.[3]
| Preceding station |  National Rail
|
Following station | ||
|---|---|---|---|---|
| Tisbury | South West Trains West of England Main Line |
Templecombe or Terminus | ||
See also
References
- ^ a b c d Phillips, Derek; Pryer, George (1997). The Salisbury to Exeter Line. Sparkford: Oxford Publishing Company. ISBN 0-86093-525-6.
- ^ a b Jacobs, Gerald (2005). Railway Track Diagrams Book 3: Western. Bradford-on-Avon: Trackmaps. ISBN 0-9549866-1-X.
- ^ "Table 160: London to Salisbury and Exeter" (PDF). Electronic National Rail Timetable. Network Rail. December 2009. Retrieved 2009-12-14.