Jump to content

List of ISO standards 18000–19999

From Wikipedia, the free encyclopedia
(Redirected from ISO/IEC 18000-2)

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]

ISO 18000 – ISO 18999

[edit]
  • ISO/IEC 18000 Information technology – Radio frequency identification for item management
  • ISO/IEC 18004:2015 Information technology – Automatic identification and data capture techniques – QR Code bar code symbology specification
  • ISO/IEC 18009:1999 Information technology – Programming languages – Ada: Conformity assessment of a language processor
  • ISO/IEC 18010:2002 Information technology - Pathways and spaces for customer premises cabling
  • ISO/IEC 18012 Information technology - Home Electronic System - Guidelines for product interoperability
    • ISO/IEC 18012-1:2004 Part 1: Introduction
    • ISO/IEC 18012-2:2012 Part 2: Taxonomy and application interoperability model
  • ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
    • ISO/IEC 18013-1:2005 Part 1: Physical characteristics and basic data set
    • ISO/IEC 18013-2:2008 Part 2: Machine-readable technologies
    • ISO/IEC 18013-3:2017 Part 3: Access control, authentication and integrity validation
    • ISO/IEC 18013-4:2019 Part 4: Test methods
    • ISO/IEC 18013-5 Part 5: Mobile driving licence (mDL) application
  • ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
  • ISO/IEC TR 18015:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on C++ Performance
  • ISO/IEC TR 18016:2003 Information technology – Message Handling Systems (MHS): Interworking with Internet e-mail
  • ISO/IEC 18017:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of Virtual Private Network scenarios
  • ISO/IEC TR 18018:2010 Information technology - Systems and software engineering - Guide for configuration management tool capabilities
  • ISO/IEC 18021:2002 Information technology – User interfaces for mobile tools for management of database communications in a client-server model
  • ISO/IEC 18023 Information technology – SEDRIS
    • ISO/IEC 18023-1:2006 Part 1: Functional specification
    • ISO/IEC 18023-2:2006 Part 2: Abstract transmittal format
    • ISO/IEC 18023-3:2006 Part 3: Transmittal format binary encoding
  • ISO/IEC 18024 Information technology – SEDRIS language bindings
  • ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
  • ISO/IEC 18026:2009 Information technology – Spatial Reference Model (SRM)
  • ISO/IEC 18031:2011 Information technology - Security techniques - Random bit generation
  • ISO/IEC 18032:2005 Information technology - Security techniques - Prime number generation
  • ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
    • ISO/IEC 18033-1:2015 Part 1: General
    • ISO/IEC 18033-2:2006 Part 2: Asymmetric ciphers
    • ISO/IEC 18033-3:2010 Part 3: Block ciphers
    • ISO/IEC 18033-4:2011 Part 4: Stream ciphers
    • ISO/IEC 18033-5:2015 Part 5: Identity-based ciphers
  • ISO/IEC 18035:2003 Information technology – Icon symbols and functions for controlling multimedia software applications
  • ISO/IEC 18036:2003 Information technology - Icon symbols and functions for World Wide Web browser toolbars
  • ISO/IEC TR 18037:2008 Programming languages - C - Extensions to support embedded processors
  • ISO/IEC 18041 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings
  • ISO/IEC 18042 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings
  • ISO/IEC 18045:2008 Information technology - Security techniques - Methodology for IT security evaluation
  • ISO/IEC 18046 Information technology - Radio frequency identification device performance test methods
    • ISO/IEC 18046-1:2011 Part 1: Test methods for system performance
    • ISO/IEC 18046-2:2011 Part 2: Test methods for interrogator performance
    • ISO/IEC 18046-3:2012 Part 3: Test methods for tag performance
    • ISO/IEC 18046-4:2015 Part 4: Test methods for performance of RFID gates in libraries
  • ISO/IEC 18047 Information technology - Radio frequency identification device conformance test methods
    • ISO/IEC 18047-2:2012 Part 2: Test methods for air interface communications below 135 kHz
    • ISO/IEC TR 18047-3:2011 Part 3: Test methods for air interface communications at 13,56 MHz
    • ISO/IEC TR 18047-4:2004 Part 4: Test methods for air interface communications at 2,45 GHz
    • ISO/IEC 18047-6:2012 Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
    • ISO/IEC TR 18047-7:2010 Part 7: Test methods for active air interface communications at 433 MHz
  • ISO/IEC 18050:2006 Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks
  • ISO/IEC 18051:2012 Information technology – Telecommunications and information exchange between systems – Services for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC 18052:2012 Information technology – Telecommunications and information exchange between systems – ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC TR 18053:2000 Information technology - Telecommunications and information exchange between systems - Glossary of definitions and terminology for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC 18056:2012 Information technology – Telecommunications and information exchange between systems – XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC TR 18057:2004 Information technology – Telecommunications and information exchange between systems – Using ECMA-323 (CSTA XML) in a Voice Browser Environment
  • ISO/TS 18062:2016 Health informatics – Categorial structure for representation of herbal medicaments in terminological systems
  • ISO 18064:2014 Thermoplastic elastomers – Nomenclature and abbreviated terms
  • ISO 18065:2015 Tourism and related services – Tourist services for public use provided by Natural Protected Areas Authorities – Requirements
  • ISO 18082:2014 Anaesthetic and respiratory equipment – Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
  • ISO 18091:2014 Quality management systems – Guidelines for the application of ISO 9001:2008 in local government
  • ISO/IEC 18092:2013 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
  • ISO/IEC 18093:1999 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 5,2 Gbytes per cartridge
  • ISO 18104:2014 Health informatics – Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems
  • ISO/TS 18110:2015 Nanotechnologies - Vocabularies for science, technology and innovation indicators
  • ISO 18115 Surface chemical analysis – Vocabulary
    • ISO 18115-1:2013 Part 1: General terms and terms used in spectroscopy
    • ISO 18115-2:2013 Part 2: Terms used in scanning-probe microscopy
  • ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO/IEC TR 18120:2016 Information technology - Learning, education, and training - Requirements for e-textbooks in education
  • ISO/IEC TR 18121:2015 Information technology - Learning, education and training - Virtual experiment framework
  • ISO/TR 18128:2014 Information and documentation - Risk assessment for records processes and systems
  • ISO 18129:2015 Condition monitoring and diagnostics of machines – Approaches for performance diagnosis
  • ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
  • ISO 18158:2016 Workplace air - Terminology
  • ISO/TS 18173:2005 Non-destructive testing - General terms and definitions
  • ISO/IEC 18180:2013 Information technology - Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2
  • ISO/IEC 18181 Information technology — JPEG XL image coding system
    • ISO/IEC 18181-1:2022 Part 1: Core coding system
    • ISO/IEC 18181-2:2021 Part 2: File format
  • ISO 18185 Freight containers – Electronic seals
  • ISO 18189:2016 Ophthalmic optics – Contact lenses and contact lens care products – Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
  • ISO 18190:2016 Anaesthetic and respiratory equipment – General requirements for airways and related equipment
  • ISO 18192 Implants for surgery – Wear of total intervertebral spinal disc prostheses
    • ISO 18192-1:2011 Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
    • ISO 18192-2:2010 Part 2: Nucleus replacements
    • ISO 18192-3:2017 Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
  • ISO/TR 18196:2016 Nanotechnologies – Measurement technique matrix for the characterization of nano-objects
  • ISO 18215:2015 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
  • ISO 18232:2006 Health Informatics – Messages and communication – Format of length limited globally unique string identifiers
  • ISO/TS 18234 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format
    • ISO/TS 18234-1:2013 Part 1: Introduction, numbering and versions (TPEG1-INV)
    • ISO/TS 18234-2:2013 Part 2: Syntax, semantics and framing structure (TPEG1-SSF)
    • ISO/TS 18234-3:2013 Part 3: Service and network information (TPEG1-SNI)
    • ISO/TS 18234-4:2006 Part 4: Road Traffic Message (RTM) application
    • ISO/TS 18234-5:2006 Part 5: Public Transport Information (PTI) application
    • ISO/TS 18234-6:2006 Part 6: Location referencing applications
    • ISO/TS 18234-7:2013 Part 7: Parking information (TPEG1-PKI)
    • ISO/TS 18234-8:2012 Part 8: Congestion and Travel Time application (TPEG1-CTT)
    • ISO/TS 18234-9:2013 Part 9: Traffic event compact (TPEG1-TEC)
    • ISO/TS 18234-10:2013 Part 10: Conditional access information (TPEG1-CAI)
    • ISO/TS 18234-11:2013 Part 11: Location Referencing Container (TPEG1-LRC)
  • ISO 18241:2016 Cardiovascular implants and extracorporeal systems – Cardiopulmonary bypass systems – Venous bubble traps
  • ISO 18242:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
  • ISO 18245:2003 Retail financial services – Merchant category codes
  • ISO 18259:2014 Ophthalmic optics – Contact lens care products – Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
  • ISO/IEC TR 18268:2013 Identification cards – Contactless integrated circuit cards – Proximity cards – Multiple PICCs in a single PCD field
  • ISO 18295 Customer contact centres
    • ISO 18295-1:2017 Part 1: Requirements for customer contact centres
    • ISO 18295-2:2017 Part 2: Requirements for clients using the services of customer contact centres
  • ISO/IEC 18305:2016 Information technology - Real time locating systems - Test and evaluation of localization and tracking systems
  • ISO/TR 18307:2001 Health informatics – Interoperability and compatibility in messaging and communication standards – Key characteristics
  • ISO 18308:2011 Health informatics – Requirements for an electronic health record architecture
  • ISO 18312 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures
    • ISO 18312-1:2012 Part 1: Direct method
    • ISO 18312-2:2012 Part 2: Indirect method
  • ISO/TR 18317:2017 Intelligent transport systems – Pre-emption of ITS communication networks for disaster and emergency communication – Use case scenarios
  • ISO 18322:2017 Space systems – General management requirements for space test centres
  • ISO/IEC 18328 Identification cards – ICC-managed devices
    • ISO/IEC 18328-1:2015 Part 1: General framework
    • ISO/IEC 18328-2:2015 Part 2: Physical characteristics and test methods for cards with devices
    • ISO/IEC 18328-3:2016 Part 3: Organization, security and commands for interchange
  • ISO/TS 18339:2015 Endotherapy devices – Eyepiece cap and light guide connector
  • ISO/TS 18340:2015 Endoscopes – Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves
  • ISO/TS 18344:2016 Effectiveness of paper deacidification processes
  • ISO 18365:2013 Hydrometry – Selection, establishment and operation of a gauging station
  • ISO/IEC 18367:2016 Information technology - Security techniques - Cryptographic algorithms and security mechanisms conformance testing
  • ISO 18369 Ophthalmic optics - Contact lenses
    • ISO 18369-1:2017 Part 1: Vocabulary, classification system and recommendations for labelling specifications
    • ISO 18369-2:2017 Part 2: Tolerances
    • ISO 18369-3:2017 Part 3: Measurement methods
    • ISO 18369-4:2017 Part 4: Physicochemical properties of contact lens materials
  • ISO/IEC 18370 Information technology - Security techniques - Blind digital signatures
    • ISO/IEC 18370-1:2016 Part 1: General
    • ISO/IEC 18370-2:2016 Part 2: Discrete logarithm based mechanisms
  • ISO/IEC 18372:2004 Information technology – RapidIO interconnect specification
  • ISO/TR 18476:2017 Ophthalmic optics and instruments – Free form technology – Spectacle lenses and measurement
  • ISO/IEC 18384 Information technology - Reference Architecture for Service Oriented Architecture (SOA RA)
    • ISO/IEC 18384-1:2016 Part 1: Terminology and concepts for SOA
    • ISO/IEC 18384-2:2016 Part 2: Reference Architecture for SOA Solutions
    • ISO/IEC 18384-3:2016 Part 3: Service Oriented Architecture ontology
  • ISO 18385:2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes – Requirements
  • ISO 18388:2016 Technical product documentation (TPD) – Relief grooves – Types and dimensioning
  • ISO 18391:2016 Geometrical product specifications (GPS) - Population specification
  • ISO/TR 18401:2017 Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004 series
  • ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
  • ISO 18405:2017 Underwater acoustics - Terminology
  • ISO 18406:2017 Underwater acoustics – Measurement of radiated underwater sound from percussive pile driving
  • ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
  • ISO 18415:2017 Cosmetics – Microbiology – Detection of specified and non-specified microorganisms
  • ISO 18416:2015 Cosmetics – Microbiology – Detection of Candida albicans
  • ISO 18431 Mechanical vibration and shock – Signal processing
    • ISO 18431-1:2005 Part 1: General introduction
    • ISO 18431-2:2004 Part 2: Time domain windows for Fourier Transform analysis
    • ISO 18431-3:2014 Part 3: Methods of time-frequency analysis
    • ISO 18431-4:2007 Part 4: Shock-response spectrum analysis
  • ISO 18434 Condition monitoring and diagnostics of machines – Thermography
    • ISO 18434-1:2008 Part 1: General procedures
  • ISO 18436 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel
    • ISO 18436-1:2012 Part 1: Requirements for assessment bodies and the assessment process
    • ISO 18436-2:2014 Part 2: Vibration condition monitoring and diagnostics
    • ISO 18436-3:2012 Part 3: Requirements for training bodies and the training process
    • ISO 18436-4:2014 Part 4: Field lubricant analysis
    • ISO 18436-5:2012 Part 5: Lubricant laboratory technician/analyst
    • ISO 18436-6:2014 Part 6: Acoustic emission
    • ISO 18436-7:2014 Part 7: Thermography
    • ISO 18436-8:2013 Part 8: Ultrasound
  • ISO 18437 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials
    • ISO 18437-1:2012 Part 1: Principles and guidelines
    • ISO 18437-2:2005 Part 2: Resonance method
    • ISO 18437-3:2005 Part 3: Cantilever shear beam method
    • ISO 18437-4:2008 Part 4: Dynamic stiffness method
    • ISO 18437-5:2011 Part 5: Poisson ratio based on comparison between measurements and finite element analysis
  • ISO/IEC 18450:2013 Information technology - Telecommunications and information exchange between systems - Web Services Description Language (WSDL) for CSTA Phase III
  • ISO 18451 Pigments, dyestuffs and extenders – Terminology
    • ISO 18451-1:2015 Part 1: General terms
  • ISO 18457:2016 Biomimetics – Biomimetic materials, structures and components
  • ISO 18458:2015 Biomimetics – Terminology, concepts and methodology
  • ISO 18459:2015 Biomimetics – Biomimetic structural optimization
  • ISO 18461:2016 International museum statistics
  • ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
  • ISO/IEC 18477 Information technology - Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
    • ISO/IEC 18477-3:2015 Part 3: Box file format
    • ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
    • ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
    • ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
    • ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
  • ISO 18490:2015 Non-destructive testing – Evaluation of vision acuity of NDT personnel
  • ISO 18495 Intelligent transport systems – Commercial freight – Automotive visibility in the distribution supply chain
    • ISO 18495-1:2016 Part 1: Architecture and data definitions
  • ISO/IEC TS 18508:2015 Information technology - Additional Parallel Features in Fortran
  • ISO 18513:2003 Tourism services - Hotels and other types of tourism accommodation - Terminology
  • ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
  • ISO/TS 18530:2014 Health Informatics – Automatic identification and data capture marking and labelling – Subject of care and individual provider identification
  • ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
  • ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
  • ISO 18542 Road vehicles – Standardized repair and maintenance information (RMI) terminology
    • ISO 18542-1:2012 Part 1: General information and use case definition
    • ISO 18542-2:2014 Part 2: Standardized process implementation requirements, Registration Authority
  • ISO 18562 Biocompatibility evaluation of breathing gas pathways in healthcare applications
    • ISO 18562-1:2017 Part 1: Evaluation and testing within a risk management process
    • ISO 18562-2:2017 Part 2: Tests for emissions of particulate matter
    • ISO 18562-3:2017 Part 3: Tests for emissions of volatile organic compounds (VOCs)
    • ISO 18562-4:2017 Part 4: Tests for leachables in condensate
  • ISO 18564:2016 Machinery for forestry – Noise test code
  • ISO/IEC 18584:2015 Information technology – Identification cards – Conformance test requirements for on-card biometric comparison applications
  • ISO 18587:2017 Translation services - Post-editing of machine translation output - Requirements
  • ISO 18589 Measurement of radioactivity in the environment - Soil
    • ISO 18589-1:2005 Part 1: General guidelines and definitions
    • ISO 18589-2:2015 Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
    • ISO 18589-3:2015 Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
    • ISO 18589-4:2009 Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry
    • ISO 18589-5:2009 Part 5: Measurement of strontium 90
    • ISO 18589-6:2009 Part 6: Measurement of gross alpha and gross beta activities
    • ISO 18589-7:2013 Part 7: In situ measurement of gamma-emitting radionuclides
  • ISO 18593:2004 Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • ISO/IEC 18598:2016 Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and applications
  • ISO 18600:2015 Textile machinery and accessories – Web roller cards – Terms and definitions
  • ISO 18601:2013 Packaging and the environment - General requirements for the use of ISO standards in the field of packaging and the environment
  • ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
  • ISO 18603:2013 Packaging and the environment—Reuse
  • ISO 18604:2013 Packaging and the environment—Material recycling
  • ISO 18605:2013 Packaging and the environment—Energy recovery
  • ISO 18606:2013 Packaging and the environment—Organic recycling
  • ISO/TS 18614:2016 Packaging - Label material - Required information for ordering and specifying self-adhesive labels
  • ISO 18619:2015 Image technology colour management - Black point compensation
  • ISO 18626:2017 Information and documentation - Interlibrary Loan Transactions
  • ISO 18629 Industrial automation systems and integration – Process specification language
  • ISO/TR 18637:2016 Nanotechnologies – Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs)
  • ISO/TR 18638:2017 Health informatics – Guidance on health information privacy education in healthcare organizations
  • ISO 18649:2004 Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
  • ISO 18650 Building construction machinery and equipment – Concrete mixers
    • ISO 18650-1:2004 Part 1: Vocabulary and general specifications
  • ISO/IEC TS 18661 Information technology - Programming languages, their environments, and system software interfaces - Floating-point extensions for C
    • ISO/IEC TS 18661-1:2014 Part 1: Binary floating-point arithmetic
    • ISO/IEC TS 18661-2:2015 Part 2: Decimal floating-point arithmetic
    • ISO/IEC TS 18661-3:2015 Part 3: Interchange and extended types
    • ISO/IEC TS 18661-4:2015 Part 4: Supplementary functions
    • ISO/IEC TS 18661-5:2016 Part 5: Supplementary attributes
  • ISO 18662 Traditional Chinese medicine - Vocabulary
  • ISO 18665:2015 Traditional Chinese medicine – Herbal decoction apparatus
  • ISO 18666:2015 Traditional Chinese medicine – General requirements of moxibustion devices
  • ISO 18682:2016 Intelligent transport systems – External hazard detection and notification systems – Basic requirements
  • ISO 18739:2016 Dentistry - Vocabulary of process chain for CAD/CAM systems
  • ISO 18743:2015 Microbiology of the food chain – Detection of Trichinella larvae in meat by artificial digestion method
  • ISO 18744:2016 Microbiology of the food chain – Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
  • ISO/IEC 18745 Information technology – Test methods for machine readable travel documents (MRTD) and associated devices
    • ISO/IEC 18745-1:2014 Part 1: Physical test methods for passport books (durability)
    • ISO/IEC 18745-2:2016 Part 2: Test methods for the contactless interface
  • ISO 18746:2016 Traditional Chinese medicine – Sterile intradermal acupuncture needles for single use
  • ISO/TS 18750:2015 Intelligent transport systems – Cooperative systems – Definition of a global concept for Local Dynamic Maps
  • ISO/PAS 18761:2013 Use and handling of medical devices covered by the scope of ISO/TC 84 – Risk assessment on mucocutaneous blood exposure
  • ISO 18774:2015 Securities and related financial instruments – Financial Instrument Short Name (FISN)
  • ISO 18775:2008 Veneers – Terms and definitions, determination of physical characteristics and tolerances
  • ISO 18777:2005 Transportable liquid oxygen systems for medical use – Particular requirements
  • ISO 18778:2005 Respiratory equipment – Infant monitors – Particular requirements
  • ISO 18788:2015 Management system for private security operations – Requirements with guidance for use
  • ISO/TS 18790 Health informatics – Profiling framework and classification for Traditional Medicine informatics standards development
    • ISO/TS 18790-1:2015 Part 1: Traditional Chinese Medicine
  • ISO/IEC 18809:2000 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-1 with MIC format
  • ISO/IEC 18810:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-2 with MIC format
  • ISO 18812:2003 Health informatics – Clinical analyser interfaces to laboratory information systems – Use profiles
  • ISO/IEC TS 18822:2015 Programming languages - C++ - File System Technical Specification
  • ISO/TS 18827:2017 Nanotechnologies – Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • ISO 18829:2017 Document management - Assessing ECM/EDRM implementations - Trustworthiness
  • ISO 18831:2016 Clothing – Digital fittings – Attributes of virtual garments
  • ISO 18835:2015 Inhalational anaesthesia systems – Draw-over anaesthetic systems
  • ISO/IEC 18836:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – MammothTape-2 format
  • ISO 18841:2018 Interpreting services — General requirements and recommendations
  • ISO/TR 18845:2017 Dentistry - Test methods for machining accuracy of computer-aided milling machines
  • ISO/TS 18867:2015 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
  • ISO 18875:2015 Coalbed methane exploration and development – Terms and definitions
  • ISO/TS 18876 Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing
    • ISO/TS 18876-1:2003 Part 1: Architecture overview and description
    • ISO/TS 18876-2:2003 Part 2: Integration and mapping methodology
  • ISO 18878:2013 Mobile elevating work platforms – Operator (driver) training
  • ISO/IEC/IEEE 18880:2015 Information technology – Ubiquitous green community control network protocol
  • ISO/IEC/IEEE 18881:2016 Information technology – Ubiquitous green community control network – Control and management
  • ISO/IEC/IEEE 18882:2017 Information technology – Telecommunications and information exchange between systems – Ubiquitous green community control network: Heterogeneous networks convergence and scalability
  • ISO/IEC/IEEE 18883:2016 Information technology – Ubiquitous green community control network – Security
  • ISO 18913:2012 Imaging materials - Permanence - Vocabulary
  • ISO 18921:2008 Imaging materials - Compact discs (CD-ROM) - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18925:2013 Imaging materials - Optical disc media - Storage practices
  • ISO 18926:2012 Imaging materials - Information stored on magneto-optical (MO) discs - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18927:2013 Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18933:2012 Imaging materials – Magnetic tape – Care and handling practices for extended usage
  • ISO 18938:2014 Imaging materials - Optical discs - Care and handling for extended storage

ISO 19000 – ISO 19999

[edit]
  • ISO 19001:2013 In vitro diagnostic medical devices – Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
  • ISO 19005 Document management – Electronic document file format for long-term preservation
  • ISO/TS 19006:2016 Nanotechnologies – 5-(and 6)-Chloromethyl-2’,7’ Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line
  • ISO 19011:2011 Guidelines for auditing management systems
  • ISO 19014 Earth Moving Machinery - Functional Safety
  • ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste
  • ISO 19018:2004 Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation
  • ISO 19019:2005 Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
  • ISO 19020:2017 Microbiology of the food chain – Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs
  • ISO/TR 19024:2016 Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass
  • ISO 19028:2016 Accessible design - Information contents, figuration and display methods of tactile guide maps
  • ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs – Guidelines for the estimation of measurement uncertainty for quantitative determinations
  • ISO/TR 19038:2005 Banking and related financial services – Triple DEA – Modes of operation – Implementation guidelines
  • ISO 19045:2015 Ophthalmic optics – Contact lens care products – Method for evaluating Acanthamoeba encystment by contact lens care products
  • ISO 19054:2005 Rail systems for supporting medical equipment
  • ISO/TR 19057:2017 Nanotechnologies – Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability
  • ISO/IEC 19058:2001 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Generic functional protocol
  • ISO/IEC TR 19075 Information technology database languages — Guidance for the use of database language SQL
  • ISO 19079:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – 6LoWPAN networking
  • ISO 19080:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – CoAP facility
  • ISO/TR 19083 Intelligent transport systems – Emergency evacuation and disaster response and recovery
    • ISO/TR 19083-1:2016 Part 1: Framework and concept of operation
  • ISO/IEC 19086 Information technology - Cloud computing - Service level agreement (SLA) framework
    • ISO/IEC 19086-1:2016 Part 1: Overview and concepts
    • ISO/IEC 19086-3:2017 Part 3: Core conformance requirements
  • ISO/TS 19091:2017 Intelligent transport systems – Cooperative ITS – Using V2I and I2V communications for applications related to signalized intersections
  • ISO 19092:2008 Financial services – Biometrics – Security framework
  • ISO/IEC 19099:2014 Information technology - Virtualization Management Specification
  • ISO 19101 Geographic information – Reference model
    • ISO 19101-1:2014 Part 1: Fundamentals
    • ISO/TS 19101-2:2008 Part 2: Imagery
  • ISO/TS 19103:2015 Geographic information – Conceptual schema language
  • ISO/TS 19104:2016 Geographic information – Terminology
  • ISO 19105:2000 Geographic information – Conformance and testing
  • ISO 19106:2004 Geographic information – Profiles
  • ISO 19107:2003 Geographic information – Spatial schema
  • ISO 19108:2002 Geographic information – Temporal schema
  • ISO 19109:2015 Geographic information – Rules for application schema
  • ISO 19110:2016 Geographic information – Methodology for feature cataloguing
  • ISO 19111:2007 Geographic information – Spatial referencing by coordinates
    • ISO 19111-2:2009 Part 2: Extension for parametric values
  • ISO 19112:2003 Geographic information – Spatial referencing by geographic identifiers
  • ISO 19113:2002 Geographic information – Quality principles [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19114:2003 Geographic information – Quality evaluation procedures [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19115 Geographic information – Metadata
    • ISO 19115-1:2014 Part 1: Fundamentals
    • ISO 19115-2:2009 Part 2: Extensions for imagery and gridded data
    • ISO/TS 19115-3:2016 Part 3: XML schema implementation for fundamental concepts
  • ISO 19116:2004 Geographic information – Positioning services
  • ISO 19117:2012 Geographic information – Portrayal
  • ISO 19118:2011 Geographic information – Encoding
  • ISO 19119:2016 Geographic information – Services
  • ISO/TR 19120:2001 Geographic information – Functional standards
  • ISO/TR 19121:2000 Geographic information – Imagery and gridded data
  • ISO/TR 19122:2004 Geographic information / Geomatics – Qualification and certification of personnel
  • ISO 19123:2005 Geographic information – Schema for coverage geometry and functions
  • ISO 19125 Geographic information – Simple feature access
  • ISO 19126:2009 Geographic information – Feature concept dictionaries and registers
  • ISO/TS 19127:2005 Geographic information – Geodetic codes and parameters
  • ISO 19128:2005 Geographic information – Web map server interface
  • ISO/TS 19129:2009 Geographic information – Imagery, gridded and coverage data framework
  • ISO/TS 19130:2010 Geographic information – Imagery sensor models for geopositioning
    • ISO/TS 19130-2:2014 Part 2: SAR, InSAR, lidar and sonar
  • ISO 19131:2007 Geographic information – Data product specifications
  • ISO 19132:2007 Geographic information – Location-based services – Reference model
  • ISO 19133:2005 Geographic information – Location-based services – Tracking and navigation
  • ISO 19134:2007 Geographic information – Location-based services – Multimodal routing and navigation
  • ISO 19135 Geographic information – Procedures for item registration
    • ISO 19135-1:2015 Part 1: Fundamentals
    • ISO/TS 19135-2:2012 Part 2: XML schema implementation
  • ISO 19136:2007 Geographic information – Geography Markup Language (GML)
    • ISO 19136-2:2015 Part 2: Extended schemas and encoding rules
  • ISO 19137:2007 Geographic information – Core profile of the spatial schema
  • ISO/TS 19138:2006 Geographic information – Data quality measures [Withdrawn: replaced by ISO 19157:2013]
  • ISO/TS 19139:2007 Geographic information – Metadata – XML schema implementation
    • ISO/TS 19139-2:2012 Part 2: Extensions for imagery and gridded data
  • ISO 19141:2008 Geographic information – Schema for moving features
  • ISO 19142:2010 Geographic information – Web Feature Service
  • ISO 19143:2010 Geographic information – Filter encoding
  • ISO 19144 Geographic information – Classification systems
    • ISO 19144-1:2009 Part 1: Classification system structure
    • ISO 19144-2:2012 Part 2: Land Cover Meta Language (LCML)
  • ISO 19145:2013 Geographic information – Registry of representations of geographic point location
  • ISO 19146:2010 Geographic information – Cross-domain vocabularies
  • ISO 19147:2015 Geographic information – Transfer Nodes
  • ISO 19148:2012 Geographic information – Linear referencing
  • ISO 19149:2011 Geographic information – Rights expression language for geographic information - GeoREL
  • ISO 19150 Geographic information – Ontology
    • ISO/TS 19150-1:2012 Part 1: Framework
    • ISO 19150-2:2015 Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)
  • ISO 19152:2012 Geographic information – Land Administration Domain Model (LADM)
  • ISO 19153:2014 Geospatial Digital Rights Management Reference Model (GeoDRM RM)
  • ISO 19154:2014 Geographic information – Ubiquitous public access – Reference model
  • ISO 19155:2012 Geographic information – Place Identifier (PI) architecture
    • ISO 19155-2:2017 Part 2: Place Identifier (PI) linking
  • ISO 19156 Geographic information - Observations and measurements
  • ISO 19157:2013 Geographic information – Data quality
    • ISO/TS 19157-2:2016 Part 2: XML schema implementation
  • ISO/TS 19158:2012 Geographic information – Quality assurance of data supply
  • ISO/TS 19159 Geographic information – Calibration and validation of remote sensing imagery sensors and data
    • ISO/TS 19159-1:2014 Part 1: Optical sensors
    • ISO/TS 19159-2:2016 Part 2: Lidar
  • ISO 19160 Addressing
    • ISO 19160-1:2015 Part 1: Conceptual model
  • ISO 19162:2015 Geographic information – Well-known text representation of coordinate reference systems
  • ISO/TS 19163 Geographic information – Content components and encoding rules for imagery and gridded data
    • ISO/TS 19163-1:2016 Part 1: Content model
  • ISO/TR 19201:2013 Mechanical vibration – Methodology for selecting appropriate machinery vibration standards
  • ISO 19204:2017 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach)
  • ISO 19213:2017 Implants for surgery – Test methods of material for use as a cortical bone model
  • ISO/IEC TS 19216:2018 Programming Languages – C++ Extensions for Networking
  • ISO/IEC TS 19217:2015 Information technology - Programming languages - C++ Extensions for concepts
  • ISO/TS 19218 Medical devices – Hierarchical coding structure for adverse events
    • ISO/TS 19218-1:2011 Part 1: Event-type codes
    • ISO/TS 19218-2:2012 Part 2: Evaluation codes
  • ISO/TR 19231:2014 Health informatics – Survey of mHealth projects in low and middle income countries (LMIC)
  • ISO 19233 Implants for surgery – Orthopaedic joint prosthesis
    • ISO 19233-1:2017 Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
  • ISO/TR 19234:2016 Hydrometry – Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360
  • ISO 19238:2014 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
  • ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84 – Devices for administration of medicinal products and catheters
  • ISO 19250:2010 Water quality – Detection of Salmonella spp.
  • ISO/TS 19256:2016 Health informatics – Requirements for medicinal product dictionary systems for health care
  • ISO 19262:2015 Photography - Archiving Systems - Vocabulary
  • ISO/TR 19263 Photography - Archiving systems
    • ISO/TR 19263-1:2017 Part 1: Best practices for digital image capture of cultural heritage material
  • ISO/TS 19264 Photography - Archiving systems - Image quality analysis
    • ISO/TS 19264-1:2017 Part 1: Reflective originals
  • ISO 19289:2015 Air quality – Meteorology – Siting classifications for surface observing stations on land
  • ISO/TS 19299:2015 Electronic fee collection – Security framework
  • ISO/TR 19300:2015 Graphic technology – Guidelines for the use of standards for print media production
  • ISO/TS 19321:2015 Intelligent transport systems – Cooperative ITS – Dictionary of in-vehicle information (IVI) data structures
  • ISO/TS 19337:2016 Nanotechnologies – Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity
  • ISO 19343:2017 Microbiology of the food chain – Detection and quantification of histamine in fish and fishery products – HPLC method
  • ISO 19361:2017 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting
  • ISO/IEC 19369:2014 Information technology – Telecommunications and information exchange between systems – NFCIP-2 test methods
  • ISO/IEC 19395:2015 Information technology - Sustainability for and by information technology - Smart data centre resource monitoring and control
  • ISO 19403 Paints and varnishes – Wettability
    • ISO 19403-1:2017 Part 1: Terminology and general principles
    • ISO 19403-2:2017 Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
    • ISO 19403-3:2017 Part 3: Determination of the surface tension of liquids using the pendant drop method
    • ISO 19403-4:2017 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
    • ISO 19403-5:2017 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
    • ISO 19403-6:2017 Part 6: Measurement of dynamic contact angle
    • ISO 19403-7:2017 Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
  • ISO/TS 19408:2015 Footwear – Sizing – Vocabulary and terminology
  • ISO 19439 Enterprise integration – Framework for enterprise modelling
  • ISO 19440 Enterprise integration – Constructs for enterprise modelling
  • ISO 19443:2018 Quality management in the supply chain for the Nuclear industry, based on ISO9001, to optimize safety and quality in supplying products and services (ITNS)
  • ISO 19444 Document management - XML Forms Data Format
    • ISO 19444-1:2016 Part 1: Use of ISO 32000-2 (XFDF 3.0)
  • ISO 19445:2016 Graphic technology - Metadata for graphic arts workflow - XMP metadata for image and document proofing
  • ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
  • ISO/IEC 19459:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Single Step Call Transfer Supplementary Service
  • ISO/IEC 19460:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Single Step Call Transfer supplementary service
  • ISO/IEC 19464:2014 Information technology – Advanced Message Queuing Protocol (AMQP) v1.0 specification
  • ISO 19465:2017 Traditional Chinese medicine - Categories of traditional Chinese medicine (TCM) clinical terminological systems
  • ISO 19467:2017 Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
  • ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
  • ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water – Training and assessment of fusion operators
  • ISO 19496 Vitreous and porcelain enamels - Terminology
    • ISO 19496-1:2017 Part 1: Terms and definitions
    • ISO 19496-2:2017 Part 2: Visual representations and descriptions
  • ISO/TR 19498:2015 Ophthalmic optics and instruments – Correlation of optotypes
  • ISO/IEC 19500 Information technology - Object Management Group - Common Object Request Broker Architecture (CORBA)
    • ISO/IEC 19500-1:2012 Part 1: Interfaces
    • ISO/IEC 19500-2:2012 Part 2: Interoperability
    • ISO/IEC 19500-3:2012 Part 3: Components
  • ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
  • ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
  • ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
  • ISO/IEC 19505 Information technology - Object Management Group Unified Modeling Language (OMG UML)
    • ISO/IEC 19505-1:2012 Part 1: Infrastructure
    • ISO/IEC 19505-2:2012 Part 2: Superstructure
  • ISO/IEC 19506:2012 Information technology—Object Management Group Architecture-Driven Modernization (ADM) - Knowledge Discovery Meta-Model (KDM)
  • ISO/IEC 19507:2012 Information technology - Object Management Group Object Constraint Language (OCL)
  • ISO/IEC 19508:2014 Information technology - Object Management Group Meta Object Facility (MOF) Core
  • ISO/IEC 19509:2014 Information technology - Object Management Group XML Metadata Interchange (XMI)
  • ISO/IEC 19510:2013 Information technology - Object Management Group Business Process Model and Notation
  • ISO/IEC 19514:2017 Information technology - Object management group systems modeling language (OMG SysML)
  • ISO/IEC 19516:2020 Information technology — Object management group — Interface definition language (IDL) 4.2
  • ISO/IEC TR 19566 Information technology - JPEG Systems
    • ISO/IEC TR 19566-1:2016 Part 1: Packaging of information using codestreams and file formats
    • ISO/IEC TR 19566-2:2016 Part 2: Transport mechanisms and packaging
  • ISO/IEC TS 19568:2017 Programming Languages - C++ Extensions for Library Fundamentals
  • ISO/IEC TS 19570:2018 Programming Languages – Technical Specification for C++ Extensions for Parallelism
  • ISO/IEC TS 19571:2016 Programming Languages - Technical specification for C++ extensions for concurrency
  • ISO/TS 19590:2017 Nanotechnologies – Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
  • ISO/IEC 19592 Information technology - Security techniques - Secret sharing
    • ISO/IEC 19592-1:2016 Part 1: General
  • ISO 19600 Compliance management systems - Guidelines
  • ISO/TR 19601:2017 Nanotechnologies – Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA)
  • ISO 19611:2017 Traditional Chinese medicine – Air extraction cupping device
  • ISO 19614:2017 Traditional Chinese medicine – Pulse graph force transducer
  • ISO/IEC 19637:2016 Information technology – Sensor network testing framework
  • ISO/TR 19639:2015 Electronic fee collection – Investigation of EFC standards for common payment schemes for multi-modal transport services
  • ISO 19649:2017 Mobile robots - Vocabulary
  • ISO/TR 19664:2017 Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
  • ISO/IEC 19678:2015 Information Technology - BIOS Protection Guidelines
  • ISO 19709 Transport packaging - Small load container systems
    • ISO 19709-1:2016 Part 1: Common requirements and test methods
    • ISO/TS 19709-2:2016 Part 2: Column Stackable System (CSS)
    • ISO/TS 19709-3:2016 Part 3: Bond Stackable System (BSS)
  • ISO/TR 19716:2016 Nanotechnologies – Characterization of cellulose nanocrystals
  • ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
  • ISO 19720 Building construction machinery and equipment – Plants for the preparation of concrete and mortar
    • ISO 19720-1:2017 Part 1: Terminology and commercial specifications
  • ISO/TR 19727:2017 Medical devices – Pump tube spallation test – General procedure
  • ISO 19731:2017 Digital analytics and web analyses for purposes of market, opinion and social research - Vocabulary and service requirements
  • ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
  • ISO/IEC TR 19755:2003 Information technology - Programming languages, their environments and system software interfaces - Object finalization for programming language COBOL
  • ISO/IEC 19756:2011 Information technology - Topic Maps - Constraint Language (TMCL)
  • ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
    • ISO/IEC 19757-2:2008 Part 2: Regular-grammar-based validation – RELAX NG
    • ISO/IEC 19757-3:2016 Part 3: Rule-based validation – Schematron
    • ISO/IEC 19757-4:2006 Part 4: Namespace-based Validation Dispatching Language (NVDL)
    • ISO/IEC 19757-5:2011 Part 5: Extensible Datatypes
    • ISO/IEC 19757-7:2009 Part 7: Character Repertoire Description Language (CREPDL)
    • ISO/IEC 19757-8:2008 Part 8: Document Semantics Renaming Language (DSRL)
    • ISO/IEC 19757-11:2011 Part 11: Schema association
  • ISO/IEC TR 19758:2003 Information technology - Document description and processing languages - DSSSL library for complex compositions
  • ISO/IEC TR 19759:2015 Software Engineering - Guide to the software engineering body of knowledge (SWEBOK)
  • ISO/IEC 19761:2011 Software engineering - COSMIC: a functional size measurement method
  • ISO/IEC 19762:2016 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary
  • ISO/IEC 19763 Information technology - Metamodel framework for interoperability (MFI)
    • ISO/IEC 19763-1:2015 Part 1: Framework
    • ISO/IEC 19763-3:2010 Part 3: Metamodel for ontology registration
    • ISO/IEC 19763-5:2015 Part 5: Metamodel for process model registration
    • ISO/IEC 19763-6:2015 Part 6: Registry Summary
    • ISO/IEC 19763-7:2015 Part 7: Metamodel for service model registration
    • ISO/IEC 19763-8:2015 Part 8: Metamodel for role and goal model registration
    • ISO/IEC TR 19763-9:2015 Part 9: On demand model selection
    • ISO/IEC 19763-10:2014 Part 10: Core model and basic mapping
    • ISO/IEC 19763-12:2015 Part 12: Metamodel for information model registration
    • ISO/IEC TS 19763-13:2016 Part 13: Metamodel for form design registration
  • ISO/IEC TR 19764:2005 Information technology – Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information technology products
  • ISO/IEC TR 19768:2007 Information technology - Programming languages - Technical Report on C++ Library Extensions
  • ISO/IEC 19770 Information technology – Software asset management
  • ISO/IEC 19772:2009 Information technology - Security techniques - Authenticated encryption
  • ISO/IEC 19773:2011 Information technology - Metadata Registries (MDR) modules
  • ISO/IEC 19774:2006 Information technology - Computer graphics and image processing - Humanoid Animation (H-Anim)
  • ISO/IEC 19775 Information technology—Computer graphics, image processing and environmental data representation—Extensible 3D (X3D)
    • ISO/IEC 19775-1:2013 Part 1: Architecture and base components
    • ISO/IEC 19775-2:2015 Part 2: Scene access interface (SAI)
  • ISO/IEC 19776 Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings
    • ISO/IEC 19776-1:2015 Part 1: Extensible Markup Language (XML) encoding
    • ISO/IEC 19776-2:2015 Part 2: Classic VRML encoding
    • ISO/IEC 19776-3:2015 Part 3: Compressed binary encoding
  • ISO/IEC 19777 Information technology - Computer graphics and image processing - Extensible 3D (X3D) language bindings
    • ISO/IEC 19777-1:2006 Part 1: ECMAScript
    • ISO/IEC 19777-2:2006 Part 2: Java
  • ISO/IEC 19778 Information technology - Learning, education and training - Collaborative technology - Collaborative workplace
    • ISO/IEC 19778-1:2015 Part 1: Collaborative workplace data model
    • ISO/IEC 19778-2:2015 Part 2: Collaborative environment data model
    • ISO/IEC 19778-3:2015 Part 3: Collaborative group data model
  • ISO/IEC 19780 Information technology - Learning, education and training - Collaborative technology - Collaborative learning communication
    • ISO/IEC 19780-1:2015 Part 1: Text-based communication
  • ISO/IEC TR 19782:2006 Information technology - Automatic identification and data capture techniques - Effects of gloss and low substrate opacity on reading of bar code symbols
  • ISO/IEC 19784 Information technology – Biometric application programming interface
    • ISO/IEC 19784-1:2006 Part 1: BioAPI specification
    • ISO/IEC 19784-2:2007 Part 2: Biometric archive function provider interface
    • ISO/IEC 19784-4:2011 Part 4: Biometric sensor function provider interface
  • ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
    • ISO/IEC 19785-1:2015 Part 1: Data element specification
    • ISO/IEC 19785-2:2006 Part 2: Procedures for the operation of the Biometric Registration Authority
    • ISO/IEC 19785-3:2015 Part 3: Patron format specifications
    • ISO/IEC 19785-4:2010 Part 4: Security block format specifications
  • ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
  • ISO/IEC 19790:2012 Information technology – Security techniques – Security requirements for cryptographic modules
  • ISO/IEC TR 19791:2010 Information technology - Security techniques - Security assessment of operational systems
  • ISO/IEC 19792:2009 Information technology - Security techniques - Security evaluation of biometrics
  • ISO/IEC 19793 Information technology - Open Distributed Processing—Use of UML for ODP system specifications
  • ISO/IEC 19794 Information technology – Biometric data interchange formats
    • ISO/IEC 19794-1:2011 Part 1: Framework
    • ISO/IEC 19794-2:2011 Part 2: Finger minutiae data
    • ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
    • ISO/IEC 19794-4:2011 Part 4: Finger image data
    • ISO/IEC 19794-5:2011 Part 5: Face image data
    • ISO/IEC 19794-6:2011 Part 6: Iris image data
    • ISO/IEC 19794-7:2014 Part 7: Signature/sign time series data
    • ISO/IEC 19794-8:2011 Part 8: Finger pattern skeletal data
    • ISO/IEC 19794-9:2011 Part 9: Vascular image data
    • ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
    • ISO/IEC 19794-11:2013 Part 11: Signature/sign processed dynamic data
    • ISO/IEC 19794-14:2013 Part 14: DNA data
    • ISO/IEC 19794-15:2017 Part 15: Palm crease image data
  • ISO/IEC 19795 Information technology – Biometric performance testing and reporting
    • ISO/IEC 19795-1:2006 Part 1: Principles and framework
    • ISO/IEC 19795-2:2007 Part 2: Testing methodologies for technology and scenario evaluation
    • ISO/IEC TR 19795-3:2007 Part 3: Modality-specific testing
    • ISO/IEC 19795-4:2008 Part 4: Interoperability performance testing
    • ISO/IEC 19795-5:2011 Part 5: Access control scenario and grading scheme
    • ISO/IEC 19795-6:2012 Part 6: Testing methodologies for operational evaluation
    • ISO/IEC 19795-7:2011 Part 7: Testing of on-card biometric comparison algorithms
  • ISO/IEC 19796 Information technology - Learning, education and training - Quality management, assurance and metrics
    • ISO/IEC 19796-1:2005 Part 1: General approach
    • ISO/IEC 19796-3:2009 Part 3: Reference methods and metrics
  • ISO/TR 19814:2017 Information and documentation - Collections management for archives and libraries
  • ISO/IEC 19831:2015 Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol – An Interface for Managing Cloud Infrastructure
  • ISO/TR 19838:2016 Microbiology – Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology
  • ISO/IEC TS 19841:2015 Technical Specification for C++ Extensions for Transactional Memory
  • ISO/TS 19844:2016 Health informatics – Identification of medicinal products – Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances
  • ISO/IEC 19845:2015 Information technology - Universal business language version 2.1 (UBL v2.1)
  • ISO 19859:2016 Gas turbine applications – Requirements for power generation
  • ISO 19891 Ships and marine technology - Specifications for gas detectors intended for use on board ships
    • ISO 19891-1:2017 Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
  • ISO/TR 19948:2016 Earth-moving machinery – Conformity assessment and certification process
  • ISO 19952:2005 Footwear – Vocabulary
  • ISO/TS 19979:2014 Ophthalmic optics – Contact lenses – Hygienic management of multipatient use trial contact lenses
  • ISO 19980:2012 Ophthalmic instruments – Corneal topographers
  • ISO/IEC 19987:2015 Information technology - EPC Information services - Specification
  • ISO/IEC 19988:2015 Information technology - GS1 Core Business Vocabulary (CBV)
  • ISO 19993 Timber structures—Glued laminated timber—Face and edge joint cleavage test

Notes

[edit]
  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".

References

[edit]
  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
[edit]