Jump to content

PKP class SP30

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andy Dingley (talk | contribs) at 12:00, 16 April 2018 (f.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SP30
SP30 locomotive
Type and origin
Power typeDiesel-electric
BuilderFablok / ZNTK Nowy Sącz
Build date1970–1977
Total produced107 converted from SM30
Specifications
Configuration:
 • UICBo′Bo′
Gauge1,435 mm (4 ft 8+12 in)
Wheel diameter850 mm (33.5 in)
Length10.140 m (33 ft 3 in)
Width3.130 m (10 ft 3 in)
Height4.300 m (14 ft 1 in)
Loco weight36 tonnes (35 long tons; 40 short tons)
Fuel typeDiesel
Fuel capacity1,060 litres (230 imp gal; 280 US gal)
Prime moverWola V-300
Wola 2DVSa-350
Engine type4diesel
Traction motorsLT-31
LKAa-310
Cylinders12
TransmissionElectric
Loco brakeKnorr-Bremse,
hand brake
Performance figures
Maximum speed60 km/h (37 mph)
Power output220 kW (300 hp)
257 kW (345 hp)
Tractive effort73.55 kN (16,530 lbf)
Career
OperatorsPKP
ClassSP30
Number in class107
Delivered1970
Retiredabout 2000
Dispositionconverted back to SM30

SP30 is a Polish series of diesel passenger locomotives used by PKP.[1]

History

In the 1970s 107 items of SM30 class locomotives were modified to heat old passenger wagons, which were modernized with 500V electric heaters, and as a result their designation was changed to SP30 (meaning a diesel locomotive able to pull passenger trains).[1] A prototype locomotive, SM30-232 was converted in 1970. Then, in 1974-1977, 106 locomotives were converted this way by the ZNTK Nowy Sącz (of those, 75 in 1974).[1] They retained their original SM30 class numbers. Those machines remained in regular service until the late 1980s. Because of a withdrawal of old wagons, in 2000 all of them were again, after dismounting heating systems, returned to SM30 series.[2] A similar modification was applied to SM42 class, resulting in the SU42 class.

Technical data

SP30 is a Bo′Bo′ locomotive, what means it runs on two bogies, each equipped with two axles. The general construction of this engine is relatively simple.

The locomotive frame is constructed of steel rolled formers. Ball stub-axles are mounted to strend girders, that make welded box construction. Power unit, composed of a diesel engine and main alternator, is mounted on parallel girders. The engine is connected to main alternator with an elastic clutch. Four traction motors (two on each bogie) are mounted with a tram system. Traction motors can be powered in series connection, parallel connection and parallel connection with field reduction of 40 to 60%.

Traction motors are series devices with 60 kW hour power. Main alternator (PABOM-186a type) is a DC machine with 600 V and 367 A. Its power rating whilst working with 1500 rpm. is 220 kW. During engine starting the main alternator serves as electric starter, powered from the battery. For the purposes of enlighting the locomotive and charging batteries an additional alternator (Pw-114a type) is used.[3]

The only difference between SM30 and SP30 classes is a device to provide wagons with power from the main alternator.[1] This device allowed the locomotive to heat up to three two-axled carriages.[2]

References

  1. ^ a b c d Template:Pl icon Bogdan Pokropiński, Lokomotywy spalinowe produkcji polskiej, WKiŁ, Warsaw, 2009, ISBN 978-83-206-1731-3, p. 69-72
  2. ^ a b Marcin Mularczyk (2006–2007). "LKK Team". Archived from the original on 2007-10-18. Retrieved 2007-09-03. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  3. ^ Jarek D. Stwarz (1997–2002). "Chester Home Page". Archived from the original on 2007-08-30. Retrieved 2007-09-03.