Sentinel-4
Manufacturer | Airbus Defence and Space[1] | ||
---|---|---|---|
Operator | Eumetsat | ||
Applications | Earth observation | ||
Specifications | |||
Spacecraft type | Satellite | ||
Bus | Meteosat Third Generation-S, Luxor bus | ||
Constellation | 1 | ||
Launch mass | 3,600 kg (7,937 lb)[2] | ||
Dimensions | 2.280 × 2.760 × 5.170 m (7.5 × 9.1 × 17.0 ft)[2] | ||
Power | 2,000 W[2] | ||
Design life | 8.5 | ||
Production | |||
Status | Under construction | ||
|
Sentinel-4 (also known as S4) is a satellite mission making up a part of the European Copernicus Programme, which is also known as the European Global Monitoring for Environment and Security (GMES) programme. Sentinel-4 will utilize 2 payload instruments integrated on board a Meteosat Third Generation Sounder (MTG-S) satellite to observe primarily the tropospheric composition of the Earth's atmosphere. The data will be gathered and made available to the Copernicus program with the aim of contributing to air quality applications such as with the Copernicus Atmosphere Services as well as the air quality monitoring over the regions of Europe and Northern Africa.[3] As with other aspects of the Copernicus programme, the Sentinel-4 initiative is funded mostly through the EU and the technical design and development has been put under responsibility of the European Space Agency (ESA).
For the detection and measurement of atmospheric characteristics, two payload instruments have been designed; the Ultra-Violet and Near Infra-Red Multispectral Spectrometer (S4 UVN) and the Infra Red Sounder (S4 IRS). The two instruments will be embarked on two Eumetsat Meteosat Third Generation Sounder (MTG-S) satellites due to be launched in 2023 and 2030.[4]
S4 Satellite Platform
Meteosat Third Generation (MTG)
As the name suggests, Meteosat Third Generation is the third generation of meteorological satellites and is developed by Thales Alenia Space (TAS) under the responsibility of Eumetsat and ESA.[5] It is the ‘next generation’ for numerical weather predication and nowcasting. The unprecedented high-resolution and profiling technology will yield a vast improvement in weather forecasting reliability for the medium and long term. Eumetsat will head up the operations of the programme and will also ensure provision of meteorological data and services to European as well as International users and improved imaging capability to the scientific community.
“The objective of the MTG system is to provide continuous high-resolution observation data and geophysical parameters of the Earth system derived from direct measurements from the radiation it emits and reflects using satellite-based sensors from a geostationary orbit. Thanks to advances in technology, MTG, compared to the current MSG system, will also provide a more powerful tool by contributing significant improvements to the existing service with an improved imagery mission and by introducing new sounding and lightning missions from a geostationary orbit” – a quote from the MTG publication[5] produced and published by OHB System AG.
Meteosat Third Generation Sounder (MTG-S) Satellite
The MTG-S satellites make up 2 of the 6 satellites in the MTG satellite fleet. The MTG-S satellites are mounted on common 3-axis stabilised platforms and are dedicated to sounding applications, including the integration of the S4 UVN an IRS instrument payloads.[5] MTG-S1 is currently planned to be launched in early 2023, and MTG-S2 in late 2030.[4]
S4 Payload Instruments
S4 UVN Multispectral Spectrometer
The UVN multispectral spectrometer is a hyperspectral spectrometer operating with spectral bands within the solar reflectance spectrum. For the UVVIS part the range is between 305 nm to 500 nm with a resolution of 0.5 nm and for the NIR part the range is 750 nm to 775 nm with a resolution of 0.12 nm. These bands work in combination with low polarization sensitivity and high radiometric accuracy. The instrument design allows for an east-west scan revisit time of approximately 1 hour, covering most of Europe and Northern Africa. With around 570 spatial samples in the east-west spatial dimension a corresponding scan rate (spatial sample rate) of approximately 8 km every 6 seconds is possible (around 1.3 km/s).[3]
At sunrise in the East the instrument will only scan the illuminated part of the Earth, allowing a total scan time of less than 1 hour. The same applies to the west in the evening. During Autumn-Winter area of coverage is shifted by 5 degrees twice, which optimizes for the illuminated areas and during Winter-Spring it is reversed. The instrument is deployed to the MTG satellite which will be in a Geostationary Earth Orbit (GEO) with longitude of around 0 degrees at an attitude in the region of 36000 km above the Equator. Deployment to the satellite is optimized and will allow Earth radiance as well as Sun irradiance and thermal fields of view, clear and unhindered by obstruction. By design, via other components of the satellite, other stray light from sun or Earth is kept to a minimum. Minimizing the stray light is very important with respect to the class of this instrument, involving the requirement for level 1B and 2 data product accuracies where the sensitivity to stray light is very high. The MTG-S satellite performs Yaw-flip maneuvers at the Equinoxes in order to optimize the instrument thermal environment. Through the availability of two Charged-Coupled Devices (CCDs) on board the instrument, the UV and NIR spectral elements can be separately recorded.[6] Each CCD observes both the spectral dimension and the North-South spatial dimension. The instrument Earth polarization sensitivity has to be less than 1% with respect to the GEO orbital conditions.[3]
The instrument is also equipped with 2 solar diffusers that will minimize spectral and spatial anomalies and which would otherwise interfere with the detection and retrieval of the atmospheric trace gases. The instrument is also equipped with a 5W White Light Source (WLS) as part of its calibration assembly.[3]
In the UVVIS range between 315 nm and 500 nm, the maximum relative radiometric spectral accuracy error over a spectral window width of 3 nm is required to be smaller than 0.05%. The in-flight absolute radiometric accuracy of the Earth spectral radiance and of the Sun irradiance is required to be better than 3% with a goal of 2%.[6] All values apply on a one-sigma confidence level. As the instrument ages in the space environment there may be some detectable limitations on the accuracy by the end of the currently expected Sentinel-4 mission lifetime of 10 years.[5]
The S4's UVN is also the first space-borne spectrometer to use dielectric reflection grating. This type of grating was initially developed for the manipulation of laser pulses, but the Fraunhofer Institute of Applied Optics and Precision Engineering in Jena, Germany was able to convert the concept for use on Sentinel-4's spectrometer.[7]
Infra-Red Sounder (IRS)
The instrument is a Fourier Transform spectrometer. Its task will be to detect Earth's atmospheric gas structure and relay data to the ground for use in more accurate and reliable weather forecasting. OHB System AG is responsible for the design, development, procurement, AIT and delivery of two Flight Models (FM) of the IRS instrument.[5] The Instrument payload will be deployed to two MTG-S satellites, similarly to the S4-UVN instrument.
The IRS is essentially a hyperspectral spectrometer designed to cover the entire Earth with the mission to provide sounding data in two bands, the Long Wave Infra Red (LWIR) 700 cm-1 – 1210 cm-1 and the Mid Wave Infra Red (MWIR) 1600 – 2175 cm-1 with spectral sampling of 0.625 cm-1. Profiles of the circulation and distribution of Earth's atmospheric water vapour and temperatures will be acquired and analysed on a layer by layer basis. This will allow further insight into the complex composition of the Earth's atmosphere as well as its dynamic. The spectral sampling will measure velocity components as part of the data sampling to determine these profiles at varying altitudes above the Earth's surface and with a high rate of spatial sampling and temporal resolution.[5]
The IRS instrument will be able to scan the full circle of the Earth within 1 hour with spatial sampling dimensions of 4 km x 4 km[5] from the Geostationary Earth Orbit (GEO) of the host Meteosat Third Generation Sounder (MTG-S) satellite. The high sampling rate is achieved through the use of a high-resolution telescope and scan mirror assembly operating in the IR spectral range.[5] Further design features of the instrument include the ability to execute observation scenarios on-board autonomously with pre-uploaded scenario information and autonomous calibration including black-body and deep-space views. Observation scenario planning will also allow continuous operation including sun-avoidance capability.[5]
The IRS Mass is 460 kg, it will consume 736.0W nominally and its detection assembly is cryo-cooled with 56K detector temperature.[5]
References
- ^ "Sentinel-4 Mission Introduction". ESA. Retrieved 23 February 2019.
- ^ a b c "Satellite Description". ESA. Retrieved 23 February 2019.
- ^ a b c d The Sentinel-4 Mission its components and implementation- Hendrik R. Stark (1), Hermann Ludwig Möller, Grégory Bazalgette Courrèges-Lacoste, Rob Koopman, Silvia Mezzasoma, Ben Veihelmann [1]
- ^ a b "Meteosat Third Generation". EUMETSAT. Retrieved 13 October 2019.
- ^ a b c d e f g h i j Meteosat Third Generation, OHB System AG (OHB SE)[permanent dead link]
- ^ a b The Sentinel-4/UVN instrument on-board MTG-S- Grégory Bazalgette Courrèges-Lacoste; Berit Ahlers; Benedikt Guldimann; Alex Short; Ben Veihelmann, Hendrik Stark [2]
- ^ U. D. Zeitner, A. Kamm, T. Benkenstein, T. Flügel-Paul, G. Leibeling, "Development of the flight models for the Sentinel-4/UVN NIR-grating unit," Proc. SPIE 10562, International Conference on Space Optics — ICSO 2016, 1056202 (25 September 2017);
Bibliography
- Infra-Red Sounder (IRS) Meteosat Third Generation – Next generation weather satellites, OHB Publication, OHB System AG