User:Anlo.po/sandbox
Appearance
Specifications[edit]
Version | Model A | Model B | Zero | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPi 1 Model A | RPi 1 Model A+ | RPi 3 Model A+ | RPi 1 Model B | RPi 1 Model B+ | RPi 2 Model B | RPi 2 Model B v1.2 | RPi 3 Model B | RPi 3 Model B+ | RPi 4 Model B | RPi Zero PCB v1.2 | RPi Zero PCB v1.3 | RPi Zero W | |
Release date | Feb 2013 | Nov 2014 | Nov 2018 | Apr–June 2012 | July 2014 | Feb 2015 | Oct 2016 | Feb 2016 | 14 Mar 2018 | 24 June 2019 28 May 2020 (8GB) |
Nov 2015 | May 2016 | 28 Feb 2017 |
Target price (USD) | $25 | $20 | $25 | $35 | $25 | $35 | $35/55/75 | $5 | $10 | ||||
Instruction set | ARMv6Z (32-bit) | ARMv8 (64-bit) | ARMv6Z (32-bit) | ARMv7-A (32-bit) | ARMv8-A (64/32-bit) | ARMv6Z (32-bit) | |||||||
SoC | Broadcom BCM2835 | Broadcom BCM2837B0 | Broadcom BCM2835 | Broadcom BCM2836 | Broadcom BCM2837 | Broadcom BCM2837B0 | Broadcom BCM2711 | Broadcom BCM2835 | |||||
FPU | VFPv2; NEON not supported | VFPv4 + NEON | VFPv2; NEON not supported | VFPv3 + NEON | VFPv4 + NEON | VFPv2; NEON not supported | |||||||
CPU | 1× ARM1176JZF-S 700 MHz | 4× Cortex-A53 1.4 GHz | 1× ARM1176JZF-S 700 MHz | 4× Cortex-A7 900 MHz | 4× Cortex-A53 900 MHz | 4× Cortex-A53 1.2 GHz | 4× Cortex-A53 1.4 GHz | 4× Cortex-A72 1.5 GHz | 1× ARM1176JZF-S 1 GHz | ||||
GPU | Broadcom VideoCore IV @ 250 MHz[a] | Broadcom VideoCore VI @ 500 MHz | Broadcom VideoCore IV @ 250 MHz[a] | ||||||||||
Memory (SDRAM) | 256 MiB[b] | 256 or 512 MiB[b] Changed to 512 MiB on 10th August 2016 |
512 MiB[b] | 256 or 512 MiB[b] Changed to 512 MiB on 15th October 2012 |
512 MiB[b] | 1 GiB[b] | 1, 2, 4 or 8 GiB[b] | 512 MiB[b] | |||||
USB 2.0 ports | 1[c] | 1[d] | 2[e] | 4[f] | 2 | 1 Micro-USB[c] | |||||||
USB 3.0 ports | 0 | 2 | 0 | ||||||||||
USB OTG ports | 0 | 1 (Power USB-C) | 1 Micro-USB[c] | ||||||||||
Video input | 15-pin MIPI camera interface (CSI) connector, used with the Raspberry Pi camera or Raspberry Pi NoIR camera | None | MIPI camera interface (CSI) | ||||||||||
HDMI | 1× HDMI (rev 1.3) | 2× HDMI (rev 2.0) via Micro-HDMI | 1× Mini-HDMI | ||||||||||
Composite video | via RCA jack | via 3.5 mm CTIA style TRRS jack | via RCA jack | via 3.5 mm CTIA style TRRS jack | via marked points on PCB for optional header pins | ||||||||
MIPI display interface (DSI)[g] | Yes | No | |||||||||||
Audio inputs | As of revision 2 boards via I²S | ||||||||||||
Audio outputs | Analog via 3.5 mm phone jack; digital via HDMI and, as of revision 2 boards, I²S | Mini-HDMI, stereo audio through PWM on GPIO | |||||||||||
On-board storage | SD, MMC, SDIO card slot (3.3 V with card power only) | MicroSDHC slot | SD, MMC, SDIO card slot | MicroSDHC slot | MicroSDHC slot, USB Boot Mode | MicroSDHC slot | |||||||
Ethernet (8P8C) | None | None | 10/100 Mbit/s USB adapter on the USB hub |
10/100 Mbit/s | 10/100/1000 Mbit/s (real speed max 300 Mbit/s) | 10/100/1000 Mbit/s | None | None | |||||
WiFi IEEE 802.11 wireless | b/g/n/ac dual band 2.4/5 GHz | None | b/g/n single band 2.4 GHz | b/g/n/ac dual band 2.4/5 GHz | b/g/n single band 2.4 GHz | ||||||||
Bluetooth | 4.2 BLE | 4.1 BLE | 4.2 LS BLE | 5.0 | 4.1 BLE | ||||||||
Low-level peripherals | 8× GPIO plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground | 17× GPIO plus the same specific functions, and HAT ID bus | 8× GPIO plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground. | 17× GPIO plus the same specific functions, and HAT ID bus | 17× GPIO plus the same specific functions, HAT, and an additional 4× UART, 4× SPI, and 4× I2C connectors. | 17× GPIO plus the same specific functions, and HAT ID bus | |||||||
Power ratings | 300 mA (1.5 W) | 200 mA (1 W) | 700 mA (3.5 W) | 200 mA (1 W) average when idle, 350 mA (1.75 W) maximum under stress (monitor, keyboard and mouse connected) | 220 mA (1.1 W) average when idle, 820 mA (4.1 W) maximum under stress (monitor, keyboard and mouse connected) | 300 mA (1.5 W) average when idle, 1.34 A (6.7 W) maximum under stress (monitor, keyboard, mouse and WiFi connected) | 459 mA (2.295 W) average when idle, 1.13 A (5.661 W) maximum under stress (monitor, keyboard, mouse and WiFi connected) | 600 mA (3 W) average when idle, 1.25 A (6.25 W) maximum under stress (monitor, keyboard, mouse and Ethernet connected), 3 A (15 W) power supply recommended | 100 mA (0.5 W) average when idle, 350 mA (1.75 W) maximum under stress (monitor, keyboard and mouse connected) | ||||
Power source | 5 V via MicroUSB or GPIO header | 5 V via USB-C or GPIO header | 5 V via MicroUSB or GPIO header | ||||||||||
Size | 85.6 mm × 56.5 mm (3.37 in × 2.22 in)[h] |
65 mm × 56.5 mm × 10 mm (2.56 in × 2.22 in × 0.39 in)[i] |
65 mm × 56.5 mm (2.56 in × 2.22 in) |
85.60 mm × 56.5 mm (3.370 in × 2.224 in)[h] |
85.60 mm × 56.5 mm × 17 mm (3.370 in × 2.224 in × 0.669 in) |
65 mm × 30 mm × 5 mm (2.56 in × 1.18 in × 0.20 in) | |||||||
Weight | 31 g (1.1 oz) |
23 g (0.81 oz) |
45 g (1.6 oz) |
46 g (1.6 oz) |
9 g (0.32 oz) | ||||||||
Console | Adding a USB network interface via tethering or a serial cable with optional GPIO power connector | ||||||||||||
Generation | 1 | 1+ | 3+ | 1 | 1+ | 2 | 2 ver 1.2 | 3 | 3+ | 4 | PCB ver 1.2 | PCB ver 1.3 | W (wireless) |
Obsolescence Statement |
— | in production until at least January 2026 | in production until at least January 2026 | — | in production until at least January 2026 | — | in production until at least January 2022 | in production until at least January 2026 | in production until at least January 2026 | in production until at least January 2026 | N/A, or see PCB ver 1.3 | in production until at least January 2022 | in production until at least January 2026 |
Type | Model A | Model B | Zero |
- ^ a b BCM2837: 3D part of GPU at 300 MHz, video part of GPU at 400 MHz, OpenGL ES 2.0 (BCM2835, BCM2836: 24 GFLOPS / BCM2837: 28.8 GFLOPS). MPEG-2 and VC-1 (with licence), 1080p30 H.264/MPEG-4 AVC high-profile decoder and encoder (BCM2837: 1080p60)
- ^ a b c Direct from the BCM2835 chip.
- ^ Direct from the BCM2837B0 chip.
- ^ via on-board 3-port USB hub; one USB port internally connected to the Ethernet port.
- ^ via on-board 5-port USB hub; one USB port internally connected to the Ethernet port.
- ^ for raw LCD panels
- ^ a b Excluding protruding connectors.
- ^ Same as HAT board.