Healesville railway line

Healesville
Healesville
Overview
Status	Closed line – Yarra Valley Railway, Yarra Valley Trail
Owner	Victorian Railways (VR) (1888–1974); VR as VicRail (1974–1983); MTA (The Met) (1983–1989); PTC (The Met) (1989–1991);
Locale	Melbourne, Victoria, Australia
Termini	Lilydale; Healesville;
Continues from	Lilydale
Connecting lines	Lilydale, Warburton lines, Yarra Valley Railway
Stations	2 current stations; 4 former stations; 1 former siding;
Service
Type	Former Melbourne suburban service
Operator(s)	Victorian Railways (VR) (1888–1974); VR as VicRail (1974–1983); MTA (The Met) (1983–1989); PTC (The Met) (1989–1991);
History
Commenced	15 May 1888
Opened	Lilydale to Yarra Glen on 15 May 1888; Yarra Glen to Healesville on 1 March 1889;
Completed	1 March 1889
Closed	Coldstream to Healesville on 15 March 1981; Lilydale to Coldstream on 10 December 1991;
Technical
Line length	24.773 km (15.393 mi)
Number of tracks	Single track
Track gauge	1,600 mm (5 ft 3 in)
Route map
	Legend
	Lilydale line
	to Flinders Street
	Warburton line
	to Warburton
	This diagram: view; talk; edit;

The Healesville railway line, in Melbourne, Australia, was the non-electrified continuation of the suburban Lilydale line, extending into the Yarra Valley. The line closed in the 1980s, but a heritage railway group, the Yarra Valley Railway, is working to retain part of the line between Yarra Glen and Healesville.

History[edit]

The Lilydale railway line was extended to Yarra Flats (now known as Yarra Glen) on 15 May 1888 with intermediate stations at Coldstream and Yering. Part of the structure included a long timber viaduct with 502 openings near Yarra Glen, spanning the Yarra River and the adjacent flood plains.^[1] The extension of the line from Yarra Glen to Healesville on 1 March 1889 required a 1 in 40 climb into a 154.4 metre tunnel with a corresponding descent at nearly the same grade. Opened at the same time was the intermediate station of Tarrawarra.

Traffic on the line included timber, livestock, milk and dairy products. Early timetables included regular goods services specifically for transporting milk.

The last regular steam passenger service was hauled in August 1964. From that time until the closure of the line in 1980, passenger services were run using diesel-electric rail motors. As from 9 December 1980 all services were withdrawn, except for some goods services to Coldstream. The line was officially closed to all traffic on 10 March 1983.^[2]

Around 2003 the uncontrolled level crossings at Beresford Rd and the Macintyre Lane were effectively removed by simply rebuilding the roads at a slightly raised level, burying the tracks beneath the bitumen. This was advantageous for the bus company whose depot is situated near the Beresford Rd crossing as buses are required to come to a complete stop at uncontrolled level crossings even if the rail line is disused. Stopping is no longer necessary now that the crossing has been removed.

On 7 February 2009 most of the trestle bridges which were a major part of the viaduct crossing the Yarra river and its floodplains were destroyed in the Black Saturday bushfires.

Services[edit]

The Healesville line had both passenger and freight services. The passenger services generally ran as a shuttle between Lilydale and Healesville stations. The freight services transported local timber, live-stock, and dairy products. Early trains running on the line included a daily evening "mixed milk and passenger train" and a single milk train on Sundays.

Prior to electrification reaching Lilydale in November 1925, the line was operated by 'A2' locomotives. After this time passenger trains on the Healesville and Warburton lines were run by two electric motor carriages from Melbourne to Lilydale, at which place 'K' or 'D3' steam locos took the carriages onto Healesville and Warburton.

On 28 October 1957 the steam hauled 7-day-a-week service was replaced by a 153hp Walker railmotor operating four services a day each way and three on weekends. Prior to this, services were limited to three each way on weekdays and two each way on weekends. On 21 April 1958 the Victorian Education Department subsidised school trains using a Walker railcar. This rail car service crossed with other services at Yarra Glen until 1972.

Trains operating on the line[edit]

Services to Healesville mostly departed from Lilydale. Throughout the existence of the line many steam and diesel locomotives and railcars operated on the Healesville line.

R class steam locomotives (1889–)
D class steam locomotives (1908–)

By 1913 all classes of locomotives were permitted on the line, however by 1918 all classes but the C class were allowed.

A2 locomotives (ceased by 1925)
J, K and D3 steam locomotives (ceased regular service in 1964).
T and B class diesels (1952–1962).
Y class diesel (until the line's official closure)
Walker railmotor (1957–1978).
DERM 62 (1978–1979)
DERM 58 (1979–1980) ^{[citation needed]}

Towards the closure of the line the DERM (Diesel Electric Rail Motor) was only permitted a maximum speed on 30 km/h and no locomotive-hauled passenger trains were permitted. Only "Y" class diesels could haul the freight services due to the deterioration of the track condition, which resulted in the derailment of T401 on 5 August 1980.

Current status[edit]

The Yarra Valley Railway currently run a Walker railmotor from Healesville to the Tarrawarra Winery, crossing the Watts River, under the Donovan's Road overbridge and through the tunnel.

There are plans in place to improve the line from Healesville to Tarrawarra to a standard suitable for the running of Rail Motors, with further goals being reconstruction to Yarra Glen. Works are underway to restore the track from Yarra Glen to Healesville following the loss of 13 bridges on Black Saturday 2009. It is hoped^[when?] to have this complete by 2017, as much progress has been made by an enthusiastic volunteer group throughout 2015.

Railmotor operations have commenced with restored 153 hp walker railmotor RM22 receiving accreditation to run a passenger train on the line as of 5 March 2010. It ran its first paying passenger run since restored on 7 March with the seats being auctioned in singles, doubles and triples to the exhibitors of the model railway show.

The tourist railway is in possession of a number of locomotives, including two Victorian Railways J-class steam engines, a T-class diesel-electric locomotive, a W-class diesel-hydraulic locomotive, a Y-Class diesel, a 153 hp Walker Rail motor and a diesel electric rail motor (DERM).

Yarra Valley Trail[edit]

A rail trail is being progressively constructed as the Yarra Valley Trail along the whole disused alignment of the line, including the reconstruction of bridges. Between Yarra Glen to Healesville, the trail will run parallel to the track. Future connections were also proposed to link up Healesville to the Warburton rail trails and form a loop. Stage 1A of the rail trail opened between Lilydale and Yering in February 2020.^[3]

Station histories[edit]

Station	Opened^[4]	Closed^[4]	Age	Notes
Lilydale	1 December 1882		141 years
Blacks Siding	29 May 1911	10 May 1946	34 years
Coldstream	15 May 1888	1992	103 years
Yering	15 May 1888	15 March 1981	92 years
Yarra Glen	15 May 1888	9 December 1980	92 years	Formerly Yarra Flats
	1985	1989	4 years	Tourist service
	1993	1994	12 months	Tourist service
Tarrawarra	15 May 1889	15 March 1981	91 years
	1988	1989	12 months	Tourist service
	1992	1994	24 months	Tourist service
Healesville	1 March 1889	12 September 1980	91 years
Healesville	1990		34 years	Tourist service

References[edit]

^ "Extension of the Lilydale Line". Archived from the original on 6 July 2011. Retrieved 18 November 2009.
^ "Decline". Archived from the original on 6 July 2011. Retrieved 18 November 2009.
^ "Yarra Valley Trail". Ride Yarra Ranges. Retrieved 19 January 2022.
^ ^a ^b "Vicsig – Healesville line". vicsig.net. Retrieved 6 May 2023.

[1] "Extension of the Lilydale Line". Archived from the original on 6 July 2011. Retrieved 18 November 2009.

[2] "Decline". Archived from the original on 6 July 2011. Retrieved 18 November 2009.

[3] "Yarra Valley Trail". Ride Yarra Ranges. Retrieved 19 January 2022.

[vicsig-4] "Vicsig – Healesville line". vicsig.net. Retrieved 6 May 2023.

[1]

[2]

[3]

[4]