SIM card

"Simcard" redirects here. For the brand-name medication, see Simvastatin.

A mini-SIM card next to its electrical contacts in a Nokia 6233.

A subscriber identity module (SIM) on a removable SIM card securely stores the service-subscriber key (IMSI) used to identify a subscriber on mobile telephony devices (such as mobile phones and computers). The SIM card allows users to change phones by simply removing the SIM card from one mobile phone and inserting it into another mobile phone or broadband telephony device.

A SIM card contains its unique serial number, internationally unique number of the mobile user (IMSI), security authentication and ciphering information, temporary information related to the local network, a list of the services the user has access to and two passwords (PIN for usual use and PUK for unlocking).

SIM cards are available in three standard sizes. The first is the size of a credit card (85.60 mm × 53.98 mm x 0.76 mm). The newer, most popular miniature version has the same thickness but a length of 25 mm and a width of 15 mm, and has one of its corners truncated (chamfered) to prevent misinsertion. The newest incarnation known as the 3FF or micro-SIM has dimensions of 15 mm × 12 mm. Most cards of the two smaller sizes are supplied as a full-sized card with the smaller card held in place by a few plastic links; it can easily be broken off to be used in a device that uses the smaller SIM.

The first SIM card was made in 1991, with Munich smart card maker Giesecke & Devrient selling the first 300 SIM cards to Finnish wireless network operator Radiolinja.

Smart card technology

SIM chip structure and packaging

There are three operating voltages for SIM cards: 5 V, 3 V and 1.8 V (ISO/IEC 7816-3 classes A, B and C respectively). The operating voltage of the majority of SIM cards launched before 1998 was 5 V. SIM cards produced subsequently are compatible with 3 V and 5 V or with 1.8 V and 3 V.

A W-SIM is a SIM card that incorporates core cellular technology in the card itself.

A virtual SIM is a mobile phone number provided by a mobile network operator that does not require a SIM card to terminate phone calls on a user's mobile phone.

Features added in later releases

The specification that standardized the micro-SIM form factor continues to evolve. Some features introduced recently include:

• a micro-SIM form factor
• allow for multiple simultaneous applications accessing the card through logical channels;
• introduce mutual authentication as a way to eliminate carrier spoofing by allowing the SIM card to authenticate the cell tower to which it is connecting;
• add a new PIN protection with hierarchical PIN management with a universal PIN, an application PIN and a local PIN; and
• expand the phonebook storage of the SIM card with entries for email, second name, and groups.

Card sizes

Micro-SIM and mini-SIM, as normally supplied in full-sized carrier cards

SIM cards were first made the same size as a credit card (85.60 mm × 53.98 mm × 0.76 mm). The development of physically smaller mobile devices prompted the development of a smaller SIM card, the mini-SIM card. Mini-SIM cards have the same thickness as full-size cards, but their length and width are reduced to 25 mm × 15 mm.

The mini-SIM card has the same contact arrangement as the full-size SIM card and they are normally supplied within a full-size card carrier, attached by a number of linking pieces. This arrangement (defined in ISO/IEC 7810 as ID-1/000) allows for such a card to be used in a device requiring a full-size card, or to be used in a device requiring a mini-SIM card after cleanly breaking the scorings manufactured in the outline of a mini-SIM card.

Even smaller device sizes have prompted the development of a yet smaller card size, the 3FF card or micro-SIM. Micro-SIM cards have the same thickness and contact arrangement again, but the length and width are further reduced to 15 mm × 12 mm. The specifications for the 3FF card or micro-SIM also include additional functionality beyond changing the physical card size.

Development of the micro-SIM

The micro-SIM was developed by the European Telecommunications Standards Institute along with SCP, 3GPP (UTRAN/GERAN), 3GPP2 (CDMA2000), ARIB, GSMAssociaton (GSMA SCaG and GSMNA), GlobalPlatform, Liberty Alliance, and the Open Mobile Alliance (OMA) for the purpose of fitting into devices otherwise too small for a mini-SIM card.

The form factor was mentioned in the Dec 1998 3GPP SMG9 UMTS Working Party, which is the standards-setting body for GSM SIM cards, and the form factor was agreed upon in late 2003.

The micro-SIM was created with backwards compatibility in mind. The major issue with backwards compatibility was the contact area of the chip. Retaining the same contact area allows the micro-SIM to be compatible with the previous, larger SIM readers through the use of plastic cutout surrounds. The SIM was also designed to run at the same speed (5 MHz) as the previous version. The same size and positions of pins resulted in numerous "How-to" tutorials and YouTube video with detailed instructions how to cut usual SIM card to micro-SIM size with sharp knife or scissors. These tutorials became very popular among first owners of iPad 3G after its release on April 30, 2010 and iPhone 4 on June 24, 2010.

The chairman of EP SCP, Dr. Klaus Vedder, said

"With this decision, we can see that ETSI has responded to a market need from ETSI customers, but additionally there is a strong desire not to invalidate, overnight, the existing interface, nor reduce the performance of the cards. EP SCP expect to finalise the technical realisation for the third form factor at the next SCP plenary meeting, scheduled for February 2004."

Usage in mobile phone standards

SIM card for Thuraya satellite phone

The use of SIM cards is mandatory in GSM devices. The equivalent of a SIM in UMTS is called the Universal Integrated Circuit Card (UICC), which runs a USIM application, while the Removable User Identity Module (R-UIM) is more popular in CDMA-based devices e.g. CDMA2000. The UICC is still colloquially called a SIM card. Many CDMA-based standards do not include any removable card, and the service is bound to a unique identifier contained in the handset itself.

The satellite phone networks Iridium, Thuraya and Inmarsat's BGAN also use SIM cards. Sometimes these SIM cards work in regular GSM phones and also allow GSM customers to roam in satellite networks by using their own SIM card in a satellite phone.

The SIM card introduced a new and significant business opportunity of mobile telecoms operator/carrier business of the mobile virtual network operator (MVNO) which does not own or operate a cellular telecoms network, but which leases capacity from one of the network operators, and only provides a SIM card to its customers. MVNOs first appeared in Denmark, Hong Kong, Finland and the UK and today exist in over 50 countries including most of Europe, USA, Canada, Australia and parts of Asia and account for approximately 10% of all mobile phone subscribers around the world.

On some networks, the mobile phone is locked to its Carrier SIM card e.g. on the GSM networks in the USA and the UK. This tends to happen only in countries where mobile phones are heavily subsidised, but even then not all countries and not all operators. In the US the phones are locked to the carrier, meaning that only specific carriers' SIM cards will work. In the UK, typically, most phones with subsidies are SIM-locked.

Phones sold with a contract are often locked (SIM-locked) to the network that provided the phone, since the phones are often subsidized in return for using provider for a minimum term (typically, 12 or 24 months). For example in the UK, a phone that would cost £250 without a contract might be offered free-of-charge with an 18 month contract commitment of £30 per month (£540 commitment in total).

A plethora of online and high-street (third-party) businesses now offer the ability to remove the SIM-lock from a phone, effectively making it possible to then use the phone on any network by inserting a different SIM card. This is a useful benefit for travellers that might want to put a local SIM card into their phone when they arrive in a country, in order to minimize roaming charges. In many countries, now it is possible to buy a pre-pay SIM card just by walking into a store, and these SIM-only deals are a cost effective way to stay in contact when travelling.

Phones sold as pre-pay often come with an operator subsidy, especially in competitive mobile markets like the UK. These phones are sold not just through mobile phone stores, but also supermarkets, catalogs, stationery outlets and online; thus the mobile companies are constantly competing to lower the price. Prepay phones come with a bundled SIM, which can be activated by the user in case the phone is bought up. The handsets are often SIM-locked to ensure that the user does not use another operator, allowing the original operator to eventually recoup its subsidy. However, because the units can be unlocked for a small fee (and even the operators themselves offer this service), units can be bought cheaply, separated from the original SIM card and sold on for a profit, perhaps in other markets, perhaps as contract phone. This is known in the industry as box breaking, and often harms the profits of the operator while allowing complicit sales staff and box breakers to reap the rewards. Note that, if a prepaid handset breaks, the SIM card (representing the prepaid account value, plus user's address book, history, etc) can typically be moved to another prepaid handset if the phone-network is the same. That is, the account is tied to the portable SIM card, not the handset, on prepaid phones. This is useful because by 2010, prepaid handsets cost less than the value a user might have stored in an account.

Mostly, GSM and 3G mobile handsets can easily be SIM-unlocked and used on any suitable network with any SIM card. A notable exception is the Apple iPhone, where in most markets Apple has gone to extreme lengths to lock-down their phones; thus they can only be used with the partner's network. This has led to a popular hack called the jailbreak, which allows custom software unapproved by Apple to run on the phone. Then software can be run to unlock the phone, which frees the iPhone from the partner network; thus any SIM card can be inserted. (Note that jailbreaking, in itself, does not unlock the phone, and has other uses as well.) Apple and the hackers are locked in a war of escalation - described by Apple CEO Steve Jobs as 'a game of cat and mouse'[1] - with Apple constantly trying to close loopholes in their operating system, and the hackers finding new ways to jailbreak each version when it becomes available.

In countries where the phones are not subsidised e.g. Italy and Belgium, all phones are unlocked. Where the phone is not locked to its SIM card, the users can easily switch networks by simply replacing the SIM card of one network with that of another while using only one phone. This is typical, for example, among users who may want to optimise their telecoms traffic by different tariffs to different friends on different networks.

Dual SIM phones are now made by some mobile phone manufacturers, which save the user from carrying around a separate phone for every number. There are two types, the first, that allow one to switch between the SIMs, and the second, that allow both SIMs to be active simultaneously.

Operating systems

SIM operating systems come in two main types: native and Java Card. Native SIMs are based on proprietary, vendor specific software whereas the Java Card SIMs are based on standards, particularly Java Card which is a subset of the Java programming language specifically targeted at embedded devices. Java Card allows the SIM to contain programs that are hardware independent and interoperable.

Data

SIM cards store network-specific information used to authenticate and identify subscribers on the network. The most important of these are the ICC-ID, IMSI, Authentication Key (Ki), Local Area Identity (LAI) and Operator-Specific Emergency Number. The SIM also stores other carrier specific data such as the SMSC (Short Message Service Center) number, Service Provider Name (SPN), Service Dialing Numbers (SDN), Advice-Of-Charge parameters and Value Added Service (VAS) applications. (look to GSM 11.11)

Integrated circuit card identifier (ICC-ID)

Each SIM is internationally identified by its ICC-ID. ICC-IDs are stored in the SIM cards and are also engraved or printed on the SIM card body during a process called personalization. The ICC-ID is defined by the ITU-T recommendation E.118. According to E.118 the number is up to 19 digits long including a single check digit calculated using the Luhn algorithm. However, the GSM Phase 1 defined the ICC-ID length as 10 octets with operator-specific structure.

The number is composed of the following subparts:

Issuer identification number (IIN)

Maximum of seven digits:

• Major industry identifier (MII), 2 digits, 89 for telecommunication purposes.
• Country code, 1-3 digits, as defined by ITU-T recommendation E.164.
• Issuer identifier, 1-4 digits.

Individual account identification

• Individual account identification number. Its length is variable but every number under one IIN will have the same length.

Check digit

• Single digit calculated from the other digits using the Luhn algorithm.

Total size

With the GSM Phase 1 specification using 10 octets into which ICC-ID is stored as packed BCD, the data field has room for 20 digits.

In practice this means that on GSM SIM cards there are 20 digit (19+1) and 19 digit (18+1) ICC-IDs in use, depending upon issuer. However one issuer uses always same size of ICC-IDs.

To confuse matters more, SIM factories seem to have varying ways of delivering electronic copy of SIM personalization datasets. Some datasets are without the ICC-ID checksum digit, others are with the digit.

International mobile subscriber identity (IMSI)

SIM cards are identified on their individual operator networks by a unique IMSI. Mobile operators connect mobile phone calls and communicate with their market SIM cards using their IMSIs. The format is:

• The first 3 digits represent the Mobile Country Code (MCC).
• The next 2 or 3 digits represent the Mobile Network Code (MNC). 3 digit MNC codes are allowed by E.212 but are only implemented in some countries in North America, the Caribbean and Latin America.
• The next digits represent the mobile station identification number. Normally there will be 10 digits but would be fewer in the case of a 3 digit MNC or if national regulations indicate that the total length of the IMSI should be less than 15 digits.

Authentication key (K_i)

The K_i is a 128-bit value used in authenticating the SIMs on the mobile network. Each SIM holds a unique K_i assigned to it by the operator during the personalization process. The K_i is also stored on a database (known as Authentication Center or AuC) on the carrier's network.

The SIM card is designed not to allow the K_i to be obtained using the smart-card interface. Instead, the SIM card provides a function, Run GSM Algorithm, that allows the phone to pass data to the SIM card to be signed with the K_i. This, by design, makes usage of the SIM card mandatory unless the K_i can be extracted from the SIM card, or the carrier is willing to reveal the K_i. In practice, the GSM cryptographic algorithm for computing SRES_2 (see step 4, below) from the K_i has certain vulnerabilities which can allow the extraction of the K_i from a SIM card and the making of a duplicate SIM card.

Authentication process

1. When the Mobile Equipment starts up, it obtains the International Mobile Subscriber Identity (IMSI) from the SIM card, and passes this to the mobile operator requesting access and authentication. The Mobile Equipment may have to pass a PIN to the SIM card before the SIM card will reveal this information.
2. The operator network searches its database for the incoming IMSI and its associated K_i.
3. The operator network then generates a Random Number (RAND, which is a nonce) and signs it with the K_i associated with the IMSI (and stored on the SIM card), computing another number known as Signed Response 1 (SRES_1).
4. The operator network then sends the RAND to the Mobile Equipment, which passes it to the SIM card. The SIM card signs it with its K_i, producing SRES_2 which it gives to the Mobile Equipment along with encryption key K_c. The Mobile Equipment passes SRES_2 on to the operator network.
5. The operator network then compares its computed SRES_1 with the computed SRES_2 that the Mobile Equipment returned. If the two numbers match the SIM is authenticated and the Mobile Equipment is granted access to the operator's network. K_c is used to encrypt all further communications between the Mobile Equipment and the network.

Location area identity

The SIM stores network state information, which is received from the Location Area Identity (LAI). Operator networks are divided into Location Areas, each having a unique LAI number. When the device changes locations, it stores the new LAI to the SIM and sends it back to the operator network with its new location. If the device is power cycled, it will take data off the SIM, and search for the previous LAI. This saves time by avoiding having to search the whole list of frequencies that the telephone normally would.

SMS messages and contacts

Most SIM cards will orthogonally store a number of SMS messages and phone book contacts. The contacts are stored in simple 'Name and number' pairs - entries containing multiple phone numbers and additional phone numbers will usually not be stored on the SIM card. When a user tries to copy such entries to a SIM the handset's software will break them up into multiple entries, discarding any information that isn't a phone number. The number of contacts and messages stored depends on the SIM; early models would store as little as 5 messages and 20 contacts while modern SIM cards can usually store over 250 contacts.

Universal subscriber identity module

File:USIM bluefish technologies.jpg

A 64K UICC in its larger carrier card

A Universal Subscriber Identity Module is an application for UMTS mobile telephony running on a UICC smart card which is inserted in a 3G mobile phone. There is a common misconception to call the UICC itself a USIM, but the USIM is merely a logical entity on the physical card.

It stores user subscriber information, authentication information and provides storage space for text messages and phone book contacts. The phone book on a UICC has been greatly enhanced.

For authentication purposes, the USIM stores a long-term pre-shared secret key K, which is shared with the Authentication Center (AuC) in the network. The USIM also verifies a sequence number that must be within a range using a window mechanism to avoid replay attacks, and is in charge of generating the session keys CK and IK to be used in the confidentiality and integrity algorithms of the KASUMI block cipher in UMTS.

The equivalent of USIM on GSM networks is SIM, and on CDMA networks it is CSIM.

Japan

Japan's 2G PDC system (which will be completely shut down by 2012; SoftBank Mobile has already shut down PDC from March 31, 2010) also specifies a SIM, but this has never been implemented commercially. The specification of the interface between the Mobile Equipment and the SIM is given in the RCR STD-27 annex 4. The Subscriber Identity Module Expert Group was a committee of specialists assembled by the European Telecommunications Standards Institute (ETSI) to draw up the specifications (GSM 11.11) for interfacing between smart cards and mobile telephones. In 1994, the name SIMEG was changed to SMG9.

Japan's current and next generation cellular systems are based on W-CDMA (UMTS) and CDMA2000 and all use SIM cards.

• 
  KDDI's au IC-Card
• 
  NTT DoCoMo's FOMA Card

Finland

In July 2005, the Finnish government announced that a Citizen Certificate, a government-guaranteed electronic identity included in a SIM card, would be made available to every individual resident in Finland before the end of 2005, allowing mobile phone users to access e-services on the move. The Citizen Certificate has been described as "basically an e-ID card that will be compatible with several hardware devices, such as mobile phones, PDAs, personal computers, digital TV sets, and public web kiosks". It is based on open standards and secured public key infrastructure (PKI).

This plan has since been withdrawn.

See also

• International Mobile Equipment Identity
• SIM lock
• SIM cloning
• SIM connector
• Dual SIM
• UICC
• ISIM
• CSIM
• R-UIM Removable user identification module (CDMA network SIM equivalent)
• W-SIM
• Smart card
• MEID

• Valimo mobile authentication client (VMAC)
• Mobile signature
• SyncML
• Single Wire Protocol
• SIM Application Toolkit
• smartphone
• Mobile phone
• Pay as you go (phone)
• Mobile broadband
• Tethering
• PDA
• USB modem

External links

• ETSI Smart Card standards (102 221)
• GSM 11.11 - Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface.
• GSM 11.14 - Specification of the SIM Application Toolkit for the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface
• ITU-T E.118 - The International Telecommunication Charge Card. 2006 ITU-T.