Jump to content

EE-3 Jararaca: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
Rescuing 1 sources. #IABot
Line 52: Line 52:


==External links==
==External links==
* [http://www.forte.jor.br/?p=1771 EE-3 Jararaca - prototype pictures] {{Dead link |date=December 2012}} ''(in Portuguese)''
* [https://web.archive.org/20090806013909/http://www.forte.jor.br:80/?p=1771 EE-3 Jararaca - prototype pictures] ''(in Portuguese)''
{{Modern Recce}}
{{Modern Recce}}
{{Engesa}}
{{Engesa}}

Revision as of 07:41, 23 February 2016

EE-3 Jararaca
File:EE-3 Jararaca.jpg
Ecuadorian Army EE-3
Typearmoured car
Place of originBrazil
Specifications
Mass5.8 t
Length4.16m
Width2.23 m
Height1.56 m
Crew3

Armorsteel
Main
armament
1 x 20-mm Rh202 autocannon
Secondary
armament
1 x 12.7mm machinegun
EngineMercedes-Benz OM 314A diesel
120 hp
Suspension4x4
Operational
range
700 km
Maximum speed 100 km/h

The EE-3 Jararaca is a 4 wheeled armoured reconnaissance vehicle developed and manufactured by Brazilian company Engesa and in use by the Brazilian and other armies. It is named after the jararaca, a South American venomous pit viper.

History

Brazil was looking for a replacement for their ageing fleet of M8 Greyhound which dated back to the Brazilian Expeditionary Force that fought in Italy during World War II. The vehicle was developed at the end of the 1970s. It went into commercial production in 1980. It was initially intended for use in reconnaissance and patrolling but other variants were also developed, some fitted with anti-tank or anti-aircraft guided missiles. It was purchased by the Brazilian armoured forces but was also exported to a number of African and Latin American countries.

Design

EE-3 Outline

The driving compartment is located in the front, combat compartment in the middle, and the engine compartment is placed at the rear. It is operated by a crew of 3: driver, commander, and signaller-observer. The armored hull is protected by multi-layer welded armour, consisting of two layers of steel. The driving compartment is fitted with three periscopes. Driver access to his compartment is through a hatch in the roof. The commander's turret is placed behind the driving compartment to the right side and is also fitted with three periscope observation devices. The turret is equipped with a 20mm autocannon and a 12.7mm machinegun, both of which can be fired from inside the turret. The signaller's-observers seat is placed to the left of the commander's turret and has its separate hatch.

Operators

Map of EE-3 operators in blue

Current operators

References