Mars 3: Difference between revisions
m gender neutral |
Remove an uncited description of the partial image (see Talk page), and a couple other improvements |
||
| Line 141: | Line 141: | ||
}} |
}} |
||
'''Mars 3''' was a robotic [[space probe]] of the [[Soviet Union|Soviet]] [[Mars program]] |
'''Mars 3''' was a robotic [[space probe]] of the [[Soviet Union|Soviet]] [[Mars program]], launched May 28, 1971, nine days after its twin spacecraft [[Mars 2]]. The probes were identical [[robotic spacecraft]] launched by [[Proton-K]] rockets with a [[Blok D]] upper stage, each consisting of an [[orbiter]] and an attached [[lander (spacecraft)|lander]]. After the Mars 2 lander crashed on the Martian surface, the Mars 3 lander became the first spacecraft to attain a [[Soft landing (rocketry)|soft landing]] on Mars, on 2 December 1971. It failed 20 seconds after landing, having transmitted only a gray image with no details.<ref name="Perminov1" /> The Mars 2 orbiter and Mars 3 orbiter continued to circle Mars and transmit images back to Earth for another eight months. |
||
==Overview== |
==Overview== |
||
| Line 154: | Line 154: | ||
==Orbiter== |
==Orbiter== |
||
The |
The primary purpose of the 4M-V orbiter was to study the topography of the Martian surface; analyze its soil composition; measure various properties of the atmosphere; monitor "solar radiation, the solar wind, and the interplanetary and martian magnetic fields".<ref>"Mars 3". ''Nasa''. Nasa, n.d. Web. 14 August 2012. http://nssdc.gsfc.nasa.gov/nmc/spacecraftDisplay.do?id=1971-049A</ref> In addition, it served as a "communications relay to send signals from the lander to Earth".<ref>See 1</ref> |
||
The orbiter suffered from a partial loss of fuel and did not have enough to put itself into a planned 25-hour orbit. The engine instead performed a truncated burn to put the spacecraft into a highly-elliptical long-period (12 day, 19 hours) orbit about Mars. |
The orbiter suffered from a partial loss of fuel and did not have enough to put itself into a planned 25-hour orbit. The engine instead performed a truncated burn to put the spacecraft into a highly-elliptical long-period (12 day, 19 hours) orbit about Mars. |
||
| Line 178: | Line 178: | ||
====Prop-M Rover==== |
====Prop-M Rover==== |
||
[[File:Mars_propm_rover.jpg|thumb|right|250px|Prop-M Rover]] |
[[File:Mars_propm_rover.jpg|thumb|right|250px|Prop-M Rover]] |
||
Mars 3 lander had a small 4.5 kg (9.9 Lb) '[[Mars rover]]' on board, which was planned to move across the surface on skis while connected to the lander with a 15-meter [[umbilical cable]]. Two small metal rods were used for autonomous obstacle avoidance, as radio signals from Earth would take too long to drive the rovers using remote control. The rover carried a dynamic [[penetrometer]] and a radiation [[densitometer]]. |
The Mars 3 lander had a small 4.5 kg (9.9 Lb) '[[Mars rover]]' on board, which was planned to move across the surface on skis while connected to the lander with a 15-meter [[umbilical cable]]. Two small metal rods were used for autonomous obstacle avoidance, as radio signals from Earth would take too long to drive the rovers using remote control. The rover carried a dynamic [[penetrometer]] and a radiation [[densitometer]]. |
||
The main PROP-M frame was a squat box with a small protrusion at the center. The frame was supported on two wide flat skis, one extending down from each side elevating the frame slightly above the surface. At the front of the box were obstacle detection bars. The rover was planned to be placed on the surface after landing by a manipulator arm and to move in the field of view of the television cameras and stop to make measurements every 1.5 meters.<ref>Animation of how the rover was to have traversed Martian terrain: [http://giphy.com/gifs/technology-mars-xXVrw6khBFdIY GIF]</ref> The traces of movement in the Martian soil would also be recorded to determine material properties. |
The main PROP-M frame was a squat box with a small protrusion at the center. The frame was supported on two wide flat skis, one extending down from each side elevating the frame slightly above the surface. At the front of the box were obstacle detection bars. The rover was planned to be placed on the surface after landing by a manipulator arm and to move in the field of view of the television cameras and stop to make measurements every 1.5 meters.<ref>Animation of how the rover was to have traversed Martian terrain: [http://giphy.com/gifs/technology-mars-xXVrw6khBFdIY GIF]</ref> The traces of movement in the Martian soil would also be recorded to determine material properties. |
||
| Line 189: | Line 189: | ||
The lander began transmitting to the Mars 3 orbiter 90 seconds after landing.<ref name=M3/> After 20 seconds, transmission stopped for unknown reasons.<ref name=M3/> It is not known whether the fault originated with the lander or the communications relay on the orbiter. The cause of the failure may have been related to the extremely powerful Martian dust storm taking place at the time which may have induced a [[coronal discharge]], damaging the communications system. The dust storm would also explain the poor image lighting.<ref name=Perminov1 /> |
The lander began transmitting to the Mars 3 orbiter 90 seconds after landing.<ref name=M3/> After 20 seconds, transmission stopped for unknown reasons.<ref name=M3/> It is not known whether the fault originated with the lander or the communications relay on the orbiter. The cause of the failure may have been related to the extremely powerful Martian dust storm taking place at the time which may have induced a [[coronal discharge]], damaging the communications system. The dust storm would also explain the poor image lighting.<ref name=Perminov1 /> |
||
A partial image (70 lines) was transmitted. |
A partial image (70 lines) was transmitted. According to V. G. Perminov, the lead designer for Mars and Venus spacecraft at the Lavochkin design bureau during the early days of Mars exploration, the image was"a gray background with no details".<ref name=Perminov1 /> |
||
<gallery mode=packed heights=200px> |
<gallery mode="packed" heights="200px"> |
||
File:Mars3 lander2 vsm.jpg|A cut-away view of the Mars 3 Lander at the NPO Lavochkin Museum. |
File:Mars3 lander2 vsm.jpg|A cut-away view of the Mars 3 Lander at the NPO Lavochkin Museum. |
||
</gallery> |
</gallery> |
||
Revision as of 21:48, 20 July 2019
 Mars 3 Orbiter | |
| Mission type | orbiter and lander |
|---|---|
| Operator |  Soviet Union |
| COSPAR ID | Orbiter:1971-049A Lander:1971-049C |
| SATCAT no. | Orbiter:5252 Lander:5667 |
| Mission duration | Orbiter:452 days |
| Spacecraft properties | |
| Launch mass | Orbiter:3,440 kg (7,580 lb) Lander:1,210 kg (2,670 lb) |
| Start of mission | |
| Launch date | 15:26:30, May 28, 1971 (UTC) |
| Rocket | Proton-K with Blok D upper stage |
| End of mission | |
| Disposal | Decommissioned |
| Deactivated | August 22, 1972 (orbiter) |
| Last contact | Last data transmission July 1972[1] |
| Orbital parameters | |
| Reference system | Areocentric |
| Mars orbiter | |
| Orbital insertion | December 2, 1971 |
| Orbital parameters | |
| Periareion altitude | 1,500 km (930 mi) |
| Apoareion altitude | 211,400 km (131,400 mi) |
| Inclination | 60° |
| Mars lander | |
| Spacecraft component | Mars 3 Lander |
| Landing date | December 2, 1971 (11 Libra 192 Darian) 13:52 UTC SCET (MSD 34809 03:06 AMT) |
| Landing site | 45°S 202°E / 45°S 202°E (predicted)[2] |
Mars 3 was a robotic space probe of the Soviet Mars program, launched May 28, 1971, nine days after its twin spacecraft Mars 2. The probes were identical robotic spacecraft launched by Proton-K rockets with a Blok D upper stage, each consisting of an orbiter and an attached lander. After the Mars 2 lander crashed on the Martian surface, the Mars 3 lander became the first spacecraft to attain a soft landing on Mars, on 2 December 1971. It failed 20 seconds after landing, having transmitted only a gray image with no details.[3] The Mars 2 orbiter and Mars 3 orbiter continued to circle Mars and transmit images back to Earth for another eight months.
Overview
- Launch Date/Time:
- Mars 3: May 28, 1971 at 15:26:30 UTC
- Launch mass (including fuel):
- Combined: 4,650 kg (10,250 lb)
- Orbiter: 3,440 kg (7,580 lb)
- Lander: 1,210 kg (2,670 lb)
- On-orbit dry mass: 2,265 kg (4,993 lb)
- Dimensions: 4.1 m (13.5 ft) tall, 2 m (6.6 ft) across (5.9 m (19.4 ft) across with solar panels deployed)
Orbiter
The primary purpose of the 4M-V orbiter was to study the topography of the Martian surface; analyze its soil composition; measure various properties of the atmosphere; monitor "solar radiation, the solar wind, and the interplanetary and martian magnetic fields".[4] In addition, it served as a "communications relay to send signals from the lander to Earth".[5]
The orbiter suffered from a partial loss of fuel and did not have enough to put itself into a planned 25-hour orbit. The engine instead performed a truncated burn to put the spacecraft into a highly-elliptical long-period (12 day, 19 hours) orbit about Mars.
By coincidence, a particularly large dust storm on Mars adversely affected the mission. When Mariner 9 arrived and successfully orbited Mars on 14 November 1971, just two weeks prior to Mars 2 and Mars 3, planetary scientists were surprised to find the atmosphere was thick with "a planet-wide robe of dust, the largest storm ever observed". The surface was totally obscured. Unable to reprogram the mission computers, both Mars 2 and Mars 3 dispatched their landers immediately, and the orbiters used up a significant portion of their available data resources in snapping images of the featureless dust clouds
The Mars 3 orbiter sent back data covering the period from December 1971 to March 1972, although transmissions continued through August. It was announced that Mars 3 had completed their mission by 22 August 1972, after 20 orbits. The probe, combined with Mars 2, sent back a total of 60 pictures. The images and data revealed mountains as high as 22 km, atomic hydrogen and oxygen in the upper atmosphere, surface temperatures ranging from −110 °C to +13 °C, surface pressures of 5.5 to 6 mb, water vapor concentrations 5000 times less than in Earth's atmosphere, the base of the ionosphere starting at 80 to 110 km altitude, and grains from dust storms as high as 7 km in the atmosphere. The images and data enabled creation of surface relief maps,[3] and gave information on the Martian gravity and magnetic fields.
Lander
Lander spacecraft system
The Mars 3 descent module was mounted on the bus/orbiter opposite the propulsion system. It consisted of a spherical 1.2 m diameter landing capsule, a 2.9 m diameter conical aerodynamic braking shield, a parachute system and retro-rockets.
The entire descent module had a fueled mass of 1210 kg, the spherical landing capsule accounted for 358 kg of this. An automatic control system consisting of gas micro-engines and pressurized nitrogen containers provided attitude control. Four solid-fuel motors were mounted to the outer edge of the cone to control pitch and yaw.
The main and auxiliary parachutes, the engine to initiate the landing, and the radar altimeter were mounted on the top section of the lander. Foam was used to absorb shock within the descent module. The landing capsule had four triangular petals which would open after landing, righting the spacecraft and exposing the instrumentation.
The lander was equipped with two television cameras with a 360 degree view of the surface as well as a mass spectrometer to study atmospheric composition; temperature, pressure, and wind sensors; and devices to measure mechanical and chemical properties of the surface, including a mechanical scoop to search for organic materials and signs of life. It also contained a pennant with the Soviet coat of arms.
Four aerials protruded from the top of the sphere to provide communications with the orbiter via an onboard radio system. The equipment was powered by batteries which were charged by the orbiter prior to separation. Temperature control was maintained through thermal insulation and a system of radiators. The landing capsule was sterilized before launch to prevent contamination of the martian environment.
Prop-M Rover
The Mars 3 lander had a small 4.5 kg (9.9 Lb) 'Mars rover' on board, which was planned to move across the surface on skis while connected to the lander with a 15-meter umbilical cable. Two small metal rods were used for autonomous obstacle avoidance, as radio signals from Earth would take too long to drive the rovers using remote control. The rover carried a dynamic penetrometer and a radiation densitometer.
The main PROP-M frame was a squat box with a small protrusion at the center. The frame was supported on two wide flat skis, one extending down from each side elevating the frame slightly above the surface. At the front of the box were obstacle detection bars. The rover was planned to be placed on the surface after landing by a manipulator arm and to move in the field of view of the television cameras and stop to make measurements every 1.5 meters.[6] The traces of movement in the Martian soil would also be recorded to determine material properties.
Because of the demise of the lander, the rover was not deployed.
Entry, descent, landing, and transmission failure
Mars 3's descent module was released at 09:14 UT on December 2, 1971, 4 hours 35 minutes before reaching Mars.[7] The descent module entered the Martian atmosphere at roughly 5.7 km/s. Through aerodynamic braking, parachutes, and retrorockets, the lander achieved a soft landing at 45°S 202°E / 45°S 202°E[2] and began operations.
The lander began transmitting to the Mars 3 orbiter 90 seconds after landing.[7] After 20 seconds, transmission stopped for unknown reasons.[7] It is not known whether the fault originated with the lander or the communications relay on the orbiter. The cause of the failure may have been related to the extremely powerful Martian dust storm taking place at the time which may have induced a coronal discharge, damaging the communications system. The dust storm would also explain the poor image lighting.[3]
A partial image (70 lines) was transmitted. According to V. G. Perminov, the lead designer for Mars and Venus spacecraft at the Lavochkin design bureau during the early days of Mars exploration, the image was"a gray background with no details".[3]
-
A cut-away view of the Mars 3 Lander at the NPO Lavochkin Museum.
Possible images of lander on Mars
On 11 April 2013, NASA announced that the Mars Reconnaissance Orbiter (MRO) may have imaged the Mars 3 lander hardware on the surface of Mars. The HiRISE camera on the MRO took images of what may be the parachute, retrorockets, heat shield and lander.[2] The Mars 3 lander hardware was found by amateur space enthusiasts looking through publicly available archived images.[8][9]
See also
- List of Mars orbiters
- List of missions to Mars
- Mars 1M
- Space exploration
- Timeline of artificial satellites and space probes
- Robotic space missions
References
- ^ https://solarsystem.nasa.gov/resources/1060/beyond-earth-a-chronicle-of-deep-space-exploration/
- ^ a b c d Webster, Guy (April 11, 2013). "NASA Mars Orbiter Images May Show 1971 Soviet Lander". NASA. Retrieved April 12, 2013.
- ^ a b c d Perminov, V.G. (July 1999). The Difficult Road to Mars - A Brief History of Mars Exploration in the Soviet Union (PDF). NASA Headquarters History Division. pp. 34–60. ISBN 0-16-058859-6.
{{cite book}}: CS1 maint: year (link) - ^ "Mars 3". Nasa. Nasa, n.d. Web. 14 August 2012. http://nssdc.gsfc.nasa.gov/nmc/spacecraftDisplay.do?id=1971-049A
- ^ See 1
- ^ Animation of how the rover was to have traversed Martian terrain: GIF
- ^ a b c Mars 3 Lander. NASA Space Science Data Coordination. NASA
- ^ "Failed Soviet Mars spacecraft found?". 3 News NZ. April 15, 2013. Archived from the original on 2014-02-01. Retrieved 2019-01-18.
{{cite news}}: Unknown parameter|dead-url=ignored (|url-status=suggested) (help) - ^ "Как мы искали Марс-3 (Russian)". zelenyikot.com. 11 April 2013.
External links
- NASA's mars probe website
- "The Difficult Road to Mars" By V.G Perminov
- Lavochkin page on Mars-3 (in Russian)
- Ted Stryk's page on the Mars 3 Probe
- TASS notice on the Mars-3 landing (in Russian) (Wikisource)
- "The Rocky Soviet Road to Mars" by Larry Klaes - EJASA October, 1989[permanent dead link]
- Soviet documentary about mission M71 (1971-1973)(Youtube, English subtitles)
- Catalogue of Soviet Mars Probe images
Clickable image: Clicking on the labels will open a new article.
.jpg)
.jpg)
