Jump to content

Terminal Link

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Wikifox20 (talk | contribs) at 09:14, 16 July 2008. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LINK Train
Overview
OwnerGreater Toronto Airport Authority
LocaleToronto Pearson International Airport, Toronto, Canada
Termini
  • Terminal 1
  • Viscount
Stations3
Service
TypePeople mover
Services1
Operator(s)Greater Toronto Airport Authority
Rolling stockDoppelmayr APM Cable Liner
History
OpenedJuly 6, 2006
Technical
Line lengthTemplate:Km to mi
Highest elevationElevated
Route map

Viscount
Parking
Terminal 3
Toronto Pearson International Airport
Terminal 1
Toronto Pearson International Airport
LINK lines at Pearson Airport

The LINK Train is an automated people mover service installed by DCC Doppelmayr Cable Car which connects Terminals 1 and 3 and a big parking lot at Toronto Pearson International Airport in Toronto, Canada. It opened on July 6, 2006, replacing a shuttle bus service. The train runs 24 hours a day, 7 days a week and is wheelchair accessible.

Service

The service currently uses two trains of six cars each, built by DCC Doppelmayr Cable Car GmbH, a Company of Wolfurt, Austria. They use a drive and tension system. Each train has capacity for 150 passengers with baggage (25 per car - 17 standing, 8 seated) or 2,180 per hour per direction. The 4,751 ft (1,473 m) elevated system has a travel time of 3 minutes one way. If ridership increases beyond the capabilities of the system, the stations have been built to accommodate seven-car trains, increasing capacity to 175 passengers per train (2,500 per hour per direction), the addition of a second station in Terminal 1, and also conversion from the current cable system to a self-propelled technology to provide significantly more capacity if warranted.[1]

The service is free of charge.

Vehicles

The same cars are currently used on the Mandalay Bay Tram system between Mandalay Bay Resort and Casino in Las Vegas, Nevada and at Birmingham International Airport, Birmingham, England.

Stations

  • Terminal 1
  • Terminal 3
  • Viscount (Long-term parking on Airport Road)

The two lines, running side-by-side, are 1.46 km and 1.47 km long and a maximum speed of 43.2 km/h (12m/s) is possible.


Key Information

[2]

Information
Project Name and Location Toronto Pearson International Airport APM System, Toronto, Canada
Project Start Date November 15, 2002
Completion Date January 2006
Contract Amount CA $55 million (US $40 million)

Facts

[3]

Facts
Length 4,751 ft (1,473 m)
Configuration Dual track shuttle with two trains operating independently
Operating Speed 26.8 mph (43,2 km/h)
Headway 250 s
Dwell Time 36 s
Guideway Elevated steel tube truss
System Capacity 2,150 pphpd
Stations 3
Trains Two 6-car trains
Train Capacity 25 passengers/vehicle, 150 passengers/train


Previous shuttle bus

Prior to 2003 a shuttle bus service was operated between the terminals by contractor Penetang-Midland Coach Lines (PMCL).

Retired bus fleet include:


See also


References

  1. ^ Greater Toronto Airport Authority - Taking Flight - The Airport Master Plan - 2008-2030
  2. ^ Automated People Mover (APM): Planner's guide. DCC Doppelmayr Cable Car GmbH. 2008. p. 89. {{cite book}}: |first= missing |last= (help)
  3. ^ References. DCC Doppelmayr Cable Car GmbH. 2008. p. 7. {{cite book}}: |first= missing |last= (help)