SD card
![]() | |
Media type | Memory card |
---|---|
Capacity | SDSC: 1 MB to 4 GB. (SD) SDHC: 4 GB to 32 GB SDXC: >32 GB to 2 TB |
Developed by | SD Card Association |
Dimensions | Standard: 32 × 24 × 2.1 mm Mini: 21.5 x 20 x 1.4 mm Micro: 15 x 11 x 1.0 mm |
Weight | Standard: ~2.0 g Mini: ~1.0 g Micro: ~0.5 g |
Usage | Portable devices, including digital cameras and handheld computers |
Extended from | MultiMediaCard (MMC) |
Secure Digital (SD) is a non-volatile memory card format developed by the SD Card Association for use in portable devices. The SD technology is used by more than 400 brands across dozens of product categories and more than 8,000 models, and is considered the de-facto industry standard.[1]
The SDSC (Standard-Capacity) card family, commonly known as SD, has an official maximum capacity of 2 GB, though some are available up to 4 GB.[2] The SDHC (High-Capacity) card family have a capacity of 4 GB to 32 GB.[3] SDXC (eXtended-Capacity) card family have a capacity starting above 32 GB with a maximum capacity of 2 TB.[4][5] The availability of 4 GB capacity in both the SD and SDHC families have caused much compatibility confusion with users since each has a slightly different communication protocol.
From a host device point of view, all cards within the same family appear the same to it. SD / miniSD / microSD are members of the SD family. SDHC / miniSDHC / microSDHC are members of the SDHC family. SDXC / microSDXC are members of the SDXC family. SDIO / miniSDIO are members of the special SDIO I/O family. SD adapters allow the physical conversion of smaller SD cards to work in a larger physical slot, and basically are passive devices that connect the pins from the smaller SD card to the pins of the larger SD adapter.
Since cards from all families have a similar physical size, it tends to cause confusion with consumers.[6] For example, microSD, microSDHC, and microSDXC are all the same physical size, but the capabilies for each is defined by its respective family.
The communication protocols for the SDHC / SDXC / SDIO families are slightly different than the established SD family, which has caused older host devices to not recognize the newer card families. When a SDHC or SDXC card is inserted into an older SD host device, it shouldn't cause any physical or electrical damage to either the card or host device, though the host device won't be able to recognize the card. Some older host devices don't correctly handle 2 GB and/or 4 GB SD cards since they use larger blocks. Most incompatiblity issues can be resolved with a firmware update, but unfortunately vendors rarely correct issues in older host devices.
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/8_bytes_vs._8Gbytes.jpg/220px-8_bytes_vs._8Gbytes.jpg)
In 1999, SanDisk, Matsushita, and Toshiba first agreed to develop and market the SD (Secure Digital) Memory Card, which was a development of the MMC (MultiMediaCard). With a physical profile of 24×32×2.1 mm3, the new card provided both DRM up to the SDMI standard, and a high memory density for the time.
The new format was designed to compete with Sony's Memory Stick format, which was released the previous year, and featured MagicGate DRM. It was mistakenly predicted that DRM features[7] would be widely used due to pressure from music and other media suppliers to prevent piracy.
The signature SD logo was actually developed for another use entirely: it was originally used for the Super Density Disc, which was the unsuccessful Toshiba entry in the DVD format war. This is why the D resembles an optical disc.
At the 2000 CES trade show Matsushita, SanDisk, and Toshiba Corporation announced the creation of the SD Card Association to promote SD cards. It is headquartered in California and its executive membership includes some 30 world-leading high-tech companies and major content companies. Early samples of the SD Card were available in the first quarter of 2000, with production quantities of 32 and 64 megabytes available 3 months later.
In March 2003, SanDisk Corporation announced the introduction of the miniSD and demonstrated it at CeBIT 2003.[8] The miniSD card was adopted in 2003 by the SD Association as a small form factor extension to the SD card standard. While the new cards were designed especially for use in mobile phones, they are usually packaged with a miniSD adapter which enables compatibility with all devices equipped with a standard SD Memory Card slot.
In April 2006, the SD Association released a detailed specification for the non-security related parts of the SD Memory Card standard. The organization also released specifications for the SDIO (Secure Digital Input Output) cards and the standard SD host controller. During the same year, specifications were finalized for the small-form-factor microSD (formerly known as TransFlash) and SDHC, with capacities in excess of 2 GB and a minimum sustained read/write speed of 17.6 Mb/s
In September, 2006, SanDisk announced the 4GB miniSDHC.[9] Like the SD and SDHC, the miniSDHC card has the same form factor as the older miniSD card but the HC card requires HC support built into the host device. Devices that support miniSDHC will work with miniSD and miniSDHC, but devices without specific support for miniSDHC will work only with the older miniSD card.
In January 2009, the SD Association announced the SDXC family that will support cards up to 2 TB memory size and speeds up to 300 MBytes/sec.[10]
microSD
The microSD format was created by SanDisk. The concept was the brain child of the CTO of SanDisk and CTO of Motorola, who believed current memory card formats were too large for phones. It was originally called T-Flash, however just prior to product launch T-Mobile sent a cease and desist order to SanDisk claiming they own T-(anything) and the name was then changed to TransFlash. After pressure from Toshiba and Panasonic, SanDisks' partners in the 3C licensing group of the SDA, SanDisk negotiated to have the new format become a standard administered by the SDA (SD Card Association). The SDA announced the microSD format at CTIA Wireless 2005 on March 14, 2005, and approval of the final microSD specification was announced on July 13, 2005. At launch, the microSD format was available in capacities of 32, 64, and 128 MB. TransFlash and microSD cards are the same (each can be used in devices made for the other).
Design and implementation
SD cards are based on the older MultiMediaCard (MMC) format, but have a number of differences:
- The SD card is asymmetrically shaped in order not to be inserted upside down, while an MMC would go in most of the way but not make contact if inverted.
- SD cards are thicker than MMCs. SD cards generally measure 32 × 24 × 2.1 mm, but as with MMCs can be as slim as 1.4 mm if they lack a write-protect switch; such cards, called Thin SD, are described in the SD specification, but they are non-existent or rare in the market as most devices requiring a slimmer card use the smaller versions of SD: miniSD or microSD.
- The card's electrical contacts are recessed beneath the surface of the card, protecting them from contact with a user's fingers.
- SD cards typically have transfer rates in the range of 80–160 Mb/s, but this is likely to grow, due to recent improvements to the MMC standard.[11]
Devices with SD slots can use the slimmer MMCs, but standard SD cards will not fit into the slimmer MMC slots. miniSD cards can be used directly in SD slots with a simple passive adapter, since the cards differ in size and shape but not electrical interface. With an active electronic adapter, SD cards can be used in CompactFlash or PC card slots. Some SD cards include a USB connector for compatibility with desktop and laptop computers, and card readers allow SD cards to be accessed via connectivity ports such as USB, FireWire, and the parallel printer port. SD cards can also be accessed via a floppy disk drive with a FlashPath adapter.
Physical size
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a7/MicroSD_MemoryCard_002.jpg/150px-MicroSD_MemoryCard_002.jpg)
Each SD card family are available in up to 3 physical sizes. The SD and SDHC families are available in all 3 sizes, but the SDXC family is not available in the mini size, and the SDIO family is not available in the micro size.
- Standard Size
- SD, SDHC, SDXC, SDIO
- 32 mm x 24 mm x 2.1 mm. The MMC and rare thin SD cards are 1.4mm thick.
- Mini Size
- miniSD, miniSDHC, miniSDIO
- 21.5 mm x 20 mm x 1.4 mm.
- Micro Size
- microSD, microSDHC, microSDXC
- 15 mm x 11 mm x 1.0 mm.
Optional write-protect tab
When looking at the card from the top (see pictures) there is one required notch on the right side (the side with the diagonal cut-off corner).
On the left side may be a write-protection notch. If this is present, the card cannot be written. If the notch is covered by a sliding write protection tab, or absent, then the card is writeable. Because the notch is detected only by the reader, the protection can be overridden if desired (and if supported by the reader). Not all devices support write protection, which is an optional feature of the SD standard.
Some SD cards have no write-protection notch,[12] and it is absent completely in the microSD and miniSD formats.
Some music and film media companies (e.g., Disney) have released limited catalogs of records and/or videos on SD. These usually contain DRM-encoded Windows Media files, making use of the SD format's DRM capabilities.[citation needed] Such media are usually permanently marked read-only by adding the notch with no tabs.
File system
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e3/Secure_digital_card_usb-adapter_3.jpg/250px-Secure_digital_card_usb-adapter_3.jpg)
Like other flash card technologies, most SD cards ship preformatted with a file system on top of an MBR partition scheme. SD cards are typically formatted as FAT16, SDHC cards as FAT32, SDXC cards as exFAT. The ubiquity of FAT16 and FAT32 allows those cards to be accessed on virtually any host device with an SD reader. Also, standard FAT maintenance utilities (e.g., SCANDISK) can be used to repair or retrieve corrupted data, and some utilities can recover deleted files, providing that they have not been overwritten. However, because the card appears as a removable hard drive to the host system, the card can be reformatted to any file system supported by the operating system. Conversely, an SD card can contain an embedded operating system (such as a Live USB) to recover a corrupted host computer by natively booting from the flash media reader.
SD cards with 4 GB and smaller capacities can be used with many systems by being formatted with FAT16 (4 GB only possible by using 64kiB clusters, and not widely supported) or FAT32 file system (common for file systems 4GB and bigger). Cards 4GB and bigger can only be formatted with a file system that can handle these storage sizes, such as FAT32.
SD cards are plain block devices and do not in any way imply any specific partition layout or file system thus partition schemes other than MBR partitioning and the FAT file systems can be used. Under Unix-like operating systems such as Linux or FreeBSD, SD cards can be formatted using, for example, the UFS, EXT3 or the ReiserFS file systems; under Mac OS X, SD cards can be partitioned as GUID devices and formatted with the HFS+ file system. Under MS-Windows and some unix systems, SD cards can be formatted using the NTFS and on later versions exFAT file system. However most consumer products will expect MBR partitioning and FAT16 / FAT32 / exFAT filesystem.
Fragmentation may slow down the effective write speed[13] but the effect is tiny compared with that of fragmentation on hard drives. Defragmentation tools may be used. However, it is unnecessary to use any disk optimization tool because on an SD card the time required to access any block is the same. Defragmenting an SD card will wear the card out and is not normally recommended, as the number of writes, before failure occurs, is limited (often as few as 100,000 times).
Transfer modes
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/28/USB-SD-Cards.jpg/200px-USB-SD-Cards.jpg)
Depending upon the capability of a specific SD card, it may support various combinations of the following bus types and transfer modes. The SPI bus and one-bit SD bus are mandatory for all SD families. See the electrical interface section for a more detailed description.
- SPI: Serial Peripheral Interface Bus is primarily used by embedded microcontrollers. This bus type supports only 3.3 Volt power and communications.
- One-bit SD: Separate command and data channels and a proprietary transfer format.
- Four-bit SD: Uses extra pins plus some reassigned pins. UHS-I and UHS-II requires this bus type but after the card is reconfigured to communicate at 1.8 Volts.
- UHS-I: The Ultra High Speed mode is found exclusively on SDXC and SDHC products.[14] SDXC or SDHC products with the UHS-I symbol are capable of supporting data transfer speeds up to 104 MB/s. UHS-I quadruples the extant top speed of 25 MB/s. UHS bus interfaces are backwards compatible. SDXC UHS-I and SDHC UHS-I memory cards can achieve best performance when paired with a UHS-I device and are designed to allow consumers to record HD resolution videos, plus perform other simultaneous recording functions.
- UHS-II: Available exclusively on SDXC and SDHC products. The standard raises the data transfer speed to a theoretical maximum of 312 MB/s.[15]
- USB: Some SD cards may have an additional USB connector. Though not part of the SD electrical specification, this concept still meets the SD physical size specification.
Electrical interface
All SD card families must power-up at 3.3 Volt and use 3.3 Volt logic electrical interface, though SDHC and SDXC family cards can step down to 1.8 Volt after receiving specific commands.[16]
All SD card families must support two signaling bus types at power-up: SPI bus and one-bit SD bus. Depending upon the card type, an additional four-bit SD bus type may be either optional or mandatory for the card.[16]
The host has the choice of selecting either SPI or SD bus type. After power-up of a SD card, the host will "tell" the card which bus type it wants to use for communications, either SPI or one-bit SD signaling. In one-bit SD bus mode, the host can send additional commands to change over to four-bit SD bus, 1.8 voltage, and higher transfer speeds.[16]
There is a special family of SD cards, called SDIO, of which there are two types: Low-Speed and Full-Speed. Both types of SDIO cards support SPI and one-bit SD bus types, but support for the four-bus SD bus type varies depending on the card. For Low-Speed SDIO cards, the four-bit SD bus is optional. For Full-Speed SDIO cards, the four-bit SD bus capability must exist. If a SDIO card is a "combo card", which means that it has memory and I/O, then it must be configured for four-bit SD bus before using both memory and I/O. The Low-Speed SDIO cards have an additional unique requirement of a maximum clock rate of 400 KHz for all communications. SDIO cards support another unique feature, which is an optional interrupt output pin.[17]
The signaling buses supports various clock rates, including a stopped clock. After power-up, the host must communicate with the SD card up to a maximum clock rate called the Default Speed (DS), which is a bus clock up to 400 KHz for Low-Speed SDIO cards, or up to 25 MHz for all other types of SD cards. Since Low-Speed SDIO cards are limited to 400 KHz, it is recommended this be the initial maximum clock rate until additional commands can be sent to determine the exact "flavor" of SD card.[16]
SD cards may support even higher clock rate modes, which require additional configuration prior to use, which are called: High Speed (HS), UHS-I, UHS-II. The High Speed (HS) mode supports a bus clock up to 50 MHz and supported by most SD cards. The UHS-I and UHS-II clock modes are available only by SDHC and SDXC family cards, and require a four-bit SD bus communicating at 1.8 Volts.[16]
Though a SD card may be able to communicate at higher clock rates, the host is not required to communicate at high speeds. For low-power applications, it may be desirable to run the clock at slower speeds to consume less power.[16]
DRM features
The digital rights management scheme embedded in the SD cards is defined as the Content Protection for Recordable Media (CPRM) by the 4C Entity and is centered around use of the Cryptomeria cipher (also known as C2). The specification is kept secret and is accessible only to licensees. This DRM has not been seen "in the wild" and few, if any, devices appear to provide support for it. DVD-Audio uses a very similar scheme known as Content Protection for Prerecorded Media (CPPM).
Windows Phone 7 devices use SD that are designed to be accessed only by the phone manufacturer or mobile provider. A SD card inserted into phone underneath the battery compartment becomes locked "to the phone with an automatically generated key" so that "the SD card cannot be read by another phone, device, or PC".[18] Symbian devices, however, are some of the very few which can perform the necessary low-level format operations on locked SD cards. It is therefore possible to use a device such as the Nokia N8 to reformat the card for subsequent use in other devices.[19]
Super*Talent, a manufacturer of computer memory, has created the Super Digital card. They are the same in appearance and function as regular Secure Digital cards, but they lack the CPRM code commonly found in Secure Digital cards.[20]
Power consumption
The power consumption of microSD cards varies by manufacturer, but appears to be in the range of 66-330mW (20-100 mA at a supply voltage of 3.3 V). Specifications from TwinMos technologies list a maximum of 149mW (45 mA) during transfer.[21] Toshiba, on the other hand, lists 264-330mW (80-100 mA).[22]
Speeds
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/84/Sd_insides.png/180px-Sd_insides.png)
There are different speeds of SD card available. The official unit of measurement is the Speed Class Rating; an older unit of measurement is the × rating.
Speed Class Rating
The Speed Class Rating is the official unit of speed measurement for SD Cards, defined by the SD Association. The Class number represents a multiple of 8 Mb/s (1 MB/s), and meets the least sustained write speeds for a card in a fragmented state.[23] These are the ratings of some currently available cards:[23]
- Class 0 cards do not specify performance, which includes all legacy cards prior to class specifications.
- Class 2, 2 MB/s, slowest for SDHC cards.
- Class 4, 4 MB/s.
- Class 6, 6 MB/s.
- Class 10, 10 MB/s.
Even though the class ratings are defined by a governing body, like × speed ratings, class speed ratings are quoted by the manufacturers and not verified by any independent evaluation process. In applications that require sustained write throughput, such as video recording, the device may not perform satisfactorily if the SD card's class rating falls below a particular speed. For example, a camcorder that is designed to record to class 6 media may suffer dropouts or corrupted video on slower media. On slower class cards, digital cameras may experience a lag of several seconds between photo-taking, whilst the camera writes the picture to the card.
Important differences between the Speed Class and the traditional CD-ROM drive speed measurement ("×" speed ratings) are that speed class:[23]
- may be queried by the host device;
- defines the minimum transfer speed.
Since the class rating is readable by devices, they can issue a warning to the user if the inserted card's reported rating falls below the application's minimum requirement.[23]
On 21 May 2009, Panasonic announced new class 10 SDHC cards, claiming that this new class is "part of SD Card Specification Ver.3.0".[24] Toshiba also announced cards based on the new 3.0 spec.[25]
On 1 June 2010, Pretec announced the new Class-16 HD-video grade SDXC 64GB card at Computex Taipei 2010.[26]
× rating
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d0/SD-extreMEmory_2GB_alt_innen.jpg/200px-SD-extreMEmory_2GB_alt_innen.jpg)
The × rating is equal to 1.2 Mb/s. It is derived from the standard CD-ROM drive speed of 1.2 Mb/s (approximately 150 kB/s). Basic cards transfer data up to six times (6×) the data rate of the standard CD-ROM speed (7.2 Mb/s vs 1.2 Mb/s). The 2.0 specification defines speeds up to 200×, but unlike the class rating system, does not mandate that ×-ratings measure the card's least sustained write-speed. So, typically, manufacturers provide ×-ratings based on maximum read/write speeds. Furthermore, for most cards, the fastest read speed is typically swifter than its fastest write speed, leading some manufacturers to use read-speed as the ×-rating measurement. Other vendors, such as Kingston, use write-speed.[27]
This table lists common ratings, the minimum transfer rates, and the corresponding Speed Class.
Rating | Read Speed (Mbit/s) |
Write Speed (Mbit/s) |
Speed Class |
---|---|---|---|
6× | 7.2 | ||
10× | 12.0 | ||
13× | 16.0 | 16 | 2 |
26× | 32.0 | 32 | 4 |
32× | 38.4 | 40 | |
40× | 48.0 | 48 | 6 |
66× | 80.0 | 80 | 10 |
100× | 120.0 | 120 | |
133× | 160.0 | 160 | |
150× | 180.0 | 180 | |
200× | 240.0 | 240 | |
266× | 320.0 | 320 | |
300× | 360.0 | 360 | |
400× | 480.0 | 480 | |
600× | 720.0 | 720 |
Types of cards
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/Sdadaptersandcards.jpg/250px-Sdadaptersandcards.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/Czytnik_kart.jpg/250px-Czytnik_kart.jpg)
The SD card is not the only flash memory card standard ratified by the Secure Digital Card Association (SDCA). Other SD Card Association formats include miniSD, microSD (formerly known as TransFlash before ratification by the SD Card Association), and SDHC (Secure Digital High Capacity, for capacities above 4 GB–although, there are some card readers that cannot handle over 1 GB that are not SDHC). SDHC is not fully compatible with the format that it extends, in that SD devices that do not specifically support SDHC will not work with the newer cards.
The smaller miniSD and microSD cards are usable in full size MMC/SD/SDIO slots with an adapter (which must route the electrical connections as well as making physical contact). However, it is already difficult to create I/O devices in the SD form factor and this will be even more difficult in the smaller sizes.[citation needed]
As SD slots still support MMCs, the separately-evolved smaller MMC variants are also compatible with SD-supporting devices. Unlike miniSD and microSD (which are sufficiently different from SD to make mechanical adapters necessary), RS-MMC slots maintain backward compatibility with full-sized MMCs, because the RS-MMCs are simply shorter MMCs. More information on these variants can be found in the article about the MultiMediaCard standard.
It is also important to note, that unlike for data storage (which typically works everywhere an SD slot is present), an SDIO device must be supported and equipped with drivers and applications for the host system and usually does not work outside of the manufacturer's scope (which means, for example, that an HP SDIO camera usually does not work with PDAs for which it is not listed as an accessory). This behavior is often not expected by end users who typically expect that only the SD slot is required. Similar compatibility issues are sometimes seen with Bluetooth devices, although to a much lesser extent thanks to standardized Bluetooth profiles.
Most, possibly all, current MMC flash memory cards support SPI mode even if not officially required as failure to do so would severely affect compatibility. All cards currently made by SanDisk, Ritek/Ridata, and Kingmax digital appear to support SPI. Also, MMCs may be electrically identical to SD cards but in a thinner package and with an electronic fuse blown to disable SD functionality (so no SD royalties need to be paid).
MMC defined the SPI and one-bit MMC/SD protocols. The underlying SPI protocol has existed for years as a standard feature on many microcontrollers. The new protocol used open collector signaling to allow multiple cards on the same bus but this actually causes problems at higher clock rates. While SPI used three shared lines plus a separate chip select to each card, the new protocol allows up to 30 cards to be connected to the same three wires (with no chip select) at the expense of a much more complicated card initialization and the requirement that each card have a unique serial number for plug and play operation; this feature is rarely used and its use is actively discouraged in new standards (which recommend a completely separate channel to each card) because of speed and power consumption issues. The quasi-proprietary one-bit protocol was extended to support four bit wide (SD and MMC) and eight bit (MMC only) transfers for more speed while much of the rest of the computer industry is moving to higher speed narrower channels; standard SPI could simply have been clocked at higher data rates (such as 133 MHz) for higher performance than offered by four-bit SD — embedded CPUs that did not already have higher clock rates available would not have been fast enough to handle the higher data rates anyway. The SD card association dropped support for some of the old one-bit MMC protocol commands and added support for additional commands related to copy protection.
Storage capacity
SD cards (non-SDHC) with greater than 1 GB capacity
The SD Card Association's current specifications define how a standard SD (non-SDHC) card with more than 1 GB and up to 4 GB capacity should be designed. These cards should be readable in any SD 1.01 devices that take the block length data into account. Any 1 GB or lesser card should always work (so the key question is how one's reader handles block length).
According to the specification,[28] the maximum capacity of a standard SD card is defined by (BLOCKNR × BLOCK_LEN), where BLOCKNR may be (4,096 × 512) and BLOCK_LEN may be up to 2,048. This allows a capacity of 4 GB. The main problem is that some of the card readers support only a block (or, sector) size of 512 bytes, so greater than 1 GB non-SDHC cards may cause compatibility difficulties for users of such devices.
Compatibility issues with 4 GB and larger cards
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/18/Sd4gy_crop.jpg/200px-Sd4gy_crop.jpg)
Devices that use SD cards identify the card by requesting a 128-bit identification string from the card. For standard-capacity SD cards, 12 of the bits are used to identify the number of memory clusters (ranging from 1 to 4,096) and 3 of the bits are used to identify the number of blocks per cluster (which decode to 4, 8, 16, 32, 64, 128, 256, or 512 blocks per cluster).
In older 1.x implementations the standard capacity block was exactly 512 bytes. This gives 4,096 × 512 × 512 = 1 gigabyte of storage memory. A later revision of the 1.x standard allowed a 4-bit field to indicate 1,024 or 2,048 bytes per block instead, yielding up to 4 gigabytes of memory storage.
Host devices designed before this change may incorrectly identify such cards, usually by misidentifying a card with lower capacity than is the case by assuming 512 bytes per block rather than 1,024 or 2,048.
For the new SDHC (2.0) implementation, 32 bits of the identification string are used to indicate the memory size in increments of 512 bytes. The SDCA currently allows only 26 of the 32 bits to be used, giving a maximum size of 32 GB. All SD cards with a capacity larger than 4 GB must use the 2.0 implementation at minimum. Two bits that were previously reserved and fixed at 0, now called the "CSD Structure", are being used for identifying the type of card, 0 is standard capacity; 1 is high (SDHC) and extended (SDXC) capacity; 2 and 3 are reserved. Older host devices are not aware of this new field thus cannot correctly identify SDHC or SDXC cards.
All SDHC readers are able to use standard SD cards,[29] and all SDXC readers are able to use SD and SDHC cards.
Many older devices will not accept the 2 or 4 GB size even though it is in the revised standard. The following statement is from the SD Card Association specification:
To make 2 GByte card, the Maximum Block Length (READ_BL_LEN=WRITE_BL_LEN) shall be set to 1024 bytes. However, the Block Length, set by CMD16, shall be up to 512 bytes to keep consistency with 512 bytes Maximum Block Length cards (Less than and equal 2 Gbyte cards).
— [30]
Storage capacity calculations
SD cards contain a Card-Specific Data (CSD) register which holds the card's capacity, among many other things. The format changed considerably between version 1.0 (SD) and version 2.0 (SDHC, SDXC), this is the cause of the incompatibility between SD and newer cards. CSD v2.0 expanded the C_SIZE register, removed the C_SIZE_MULT register, and no longer uses READ_BL_LEN for capacity calculation.[31] Capacity is calculated thus:
CSD Version 1.0:
Capacity=(C_SIZE+1)<<(C_SIZE_MULT+2)<<READ_BL_LEN 2GiB max. Where 0<=C_SIZE<=4095, 0<=C_SIZE_MULT<=7, READ_BL_LEN==9 || READ_BL_LEN==10
CSD Version 2.0:
Capacity=(C_SIZE+1)*524288 where for SDHC 4112<=C_SIZE<=65375 (approx. 2GB) < capacity < 32GiB for SDXC 65535<=C_SIZE 32GiB <= capacity <= 2TiB max.
SDHC cards with greater than 32 GB capacity
Similarly to the above, as of version 2.00 of the specification,[28] the capacity of an SDHC card is limited to 32 GB. However, while not strictly adhering to that standard, it is in principle possible to create SDHC-like cards of up to 2 TB capacity. Some SDHC devices will accept SDXC cards with capacities greater than 32GB and recognize the full capacity, however compatibility is not guaranteed in all cases. SDHC cards have a fixed sector size of 512 bytes.
SDHC
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c3/SanDisk_SD_Card_8GB.jpg/200px-SanDisk_SD_Card_8GB.jpg)
SDHC (Secure Digital High Capacity, SD 2.0) is an extension of the SD standard which increases card's storage capacity up to 32 GB. SDHC cards share the same physical and electrical form factor as older (SD 1.x) cards, allowing SDHC-devices to support both newer SDHC cards and older SD-cards. To increase addressable storage, SDHC uses sector addressing instead of byte addressing as in the previous SD standard. Byte addressing supported card capacities up to 4 GB, whereas sector addressing can theoretically support capacities up to 2 TB (2048 GB). The current standard limits the maximum capacity of an SDHC card to 32 GB[32] (it is expected that the SDHC specification will be revised in the future to allow card capacities greater than 32 GB[23]). SDHC cards will not work in devices designed to the older SD 1.x specification. The SDHC trademark is licensed to ensure compatibility.[33]
SD and SDHC compatibility issues
The SDHC specification was completed in June 2006,[34] but by that time, non-standard high-capacity (>1GB) SD cards (based on the older 1.x specification) were already on the market. The two types of storage cards were not interchangeable, creating some confusion among customers. SD and SDHC cards and devices have these compatibility issues :
- Devices that do not specifically support SDHC do not recognize SDHC memory cards.[35] Some devices can support SDHC through a firmware upgrade.[36]
- SDHC devices are backward compatible with SD memory cards.[36]
- Some manufacturers have produced 4 GB SD cards that conform to neither the SD2.0/SDHC spec nor existing SD devices.[37]
- File System: SD cards are typically formatted with the FAT16 file system, while SDHC cards are typically formatted as FAT32.[33] However, both types of cards can support other general-purpose file systems, such as UFS2, ext2 or the proprietary exFAT for example.
- Microsoft Windows may need a hotfix to support accessing SDHC cards.[38][39][40]
SDXC
The Secure Digital Extended Capacity (SDXC) format was unveiled at CES 2009 (January 7–10, 2009). The maximum capacity defined for SDXC cards is 2 TB (2048 GB). The older SDHC cards also have a maximum capacity of 2 TB based on the card data structures, but this is artificially limited to 32 GB by the SD 2.0 specification. The first SDXCs being released are governed by an SD 3.0 specification (which also still specifies FAT32 and thus lower capacities), whereas higher capacity and faster SDXCs are expected to follow an SD 4.0 specification, which was due to be released in spring of 2010.[41]
The maximum transfer rate of SDXCs which follow the SD 3.0 specification was announced as 832 Mbit/s (these are called UHS104 speeds[41]), with plans that the SD 4.0 specification shall increase this to 2.4 Gbit/s.
The SDcard association selected Microsoft's proprietary exFAT file system in the official SDXC specification;[42][43][44] however, as with SD and SDHC, it is still a plain block device and thus arbitrary partitioning and other file systems can be used, such as ext2, HFS Plus, NTFS, UFS, etc.
History
On January 7, 2009, SanDisk and Sony announced the joint development of the XC variant of the competing Memory Stick format, boasting the same 2 TB maximum capacity of SDXC.[45]
On January 8, 2009, Panasonic announced plans for production of 64 GB SDXC cards.[46]
On March 6, 2009, Pretec introduced the world's first SDXC card[47] with a capacity of 32 GB and a read/write speed of 400 Mbit/s. At the introduction, there were no products compatible with the new memory card.
On August 3, 2009, Toshiba announced it will launch the world's first 64 GB SDXC Memory Card[48] with a read speed of 480 Mbit/s. The 64GB card (THNSU064GAA2BC) was planned to be available in the spring of 2010.[49][50] Toshiba card was available from April 13.
On January 6, 2010, Panasonic announced its first SDXC cards with 64GB and 48GB to be available in February[51] (RP-SDW64GE1K and RP-SDW48GE1K).
On January 6, 2010, Sony announced the launch of Handycam HDR-CX55V with SDXC support.
On February 8, 2010, Canon announced the launch of the new EOS Rebel T2i Digital SLR camera, the first EOS model to support SDXC memory cards.[52]
On February 19, 2010, Panasonic launched in Japan World's first available for consumers SDXC memory cards with 64GB and 48GB (RP-SDW64GE1K and RP-SDW48GE1K) together with USB card readers compatible with SDXC format.[clarification needed]
On February 22, 2010, SanDisk launched its 64GB SanDisk Ultra SDXC card.[53]
The first integrated SDXC card readers are available from JMicron[54] and are expected to be used in laptops in 2010.[55]
SDHC and SDXC compatibility issues
In the 3.0 specification, the electronic interface of SDHC and SDXC cards is the same. This means that SDHC hosts which have drivers which recognize the newly used capability bits, and have operating system software which understands the exFAT filesystem, are compatible with SDXC cards. The decision to label cards with a capacity greater than 32GB as SDXC and to use a different filesystem is due solely to the limitations in creating larger filesystems in certain versions of Microsoft Windows. Other operating system kernels, such as Linux, make no distinction between SDHC and SDXC cards, as long as the card contains a compatible filesystem.
SDHC and SDXC cards and hosts have these compatibility issues:
- Existing SDHC hosts will only support the SDXC cards at up to UHS104 speeds;[41]
- SDXC hosts are backward compatible with SD and SDHC memory cards.[56]
- The operating systems that currently support SDXC are: Linux (with a proprietary driver for the exFAT filesystem[57]), Microsoft Windows 7, Windows Vista SP1+,[56] Windows XP SP2 or SP3 with KB955704,[58] Windows Server 2008 SP1+, Windows Server 2003 SP2 or SP3 with KB955704, Windows CE 6+, and Mac OS X Snow Leopard (Intel-based)[59]
SDIO
![]() | This section needs to be updated.(January 2011) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/04/HP_PhotoSmart_SDIO_Kamera.jpg/220px-HP_PhotoSmart_SDIO_Kamera.jpg)
A SDIO (Secure Digital Input Output) card is a combination of an SD card and an I/O device. This kind of combination is increasingly found in portable electronics devices.[citation needed]
Hosts that support SDIO (typically PDAs like the Palm Treo, but occasionally laptops or mobile phones) can use small hosts designed for the SD form factor, like GPS receivers, Wi-Fi or Bluetooth adapters, modems, Ethernet adapters, barcode readers, IrDA adapters, FM radio tuners, TV tuners, RFID readers, digital cameras, or other mass storage media such as hard drives.
A number of other devices have been proposed but not yet implemented, including RS-232 serial adapters, fingerprint scanners, SDIO to USB host/slave adapters (which would allow an SDIO-equipped handheld device to use USB peripherals and/or interface to PCs), magnetic strip readers, combination Bluetooth/Wi-Fi/GPS transceivers, cellular modems (PCS, CDPD, GSM, etc.), and APRS/TNC adapters.
SDIO cards are fully compatible with the SD Memory Card host controller (including mechanical, electrical, power, signaling, and software). When an SDIO card is inserted into a non SDIO-aware host, it will cause no physical damage or disruption to device or host controller. Most of the SD Memory commands are supported in SDIO. SDIO cards can contain 8 separate logical cards, although currently, this is at most a memory and IO function. SD slots will take SD cards only. SDIO slots will take SD cards and SDIO cards.
SD cards with extra features
Various manufacturers have tried to make their SD cards stand out from the crowd in different ways
- SD Plus - A type of SD card made by Sandisk that has an integrated USB connector so it can be plugged directly into a USB port without needing any special card reader.[60] This concept has proven successful and other companies started introducing similar designs branded as duo SD or 3 Way in the case of A-DATA's microSDHC to SDHC and USB all-in-one product, which was available in 2008 only.
- Capacity Display - In 2006, A-DATA announced an SD card with its own digital display that would show how much free space is left on the card.[61]
- Eye-Fi, Inc. - Produces an SD card with Wi-Fi capability built in for 802.11g, 802.11b, and backwards-compatible 802.11n wireless networks and supporting static WEP 40; 104; and 128, WPA-PSK, and WPA2-PSK security standards. The card works with any digital camera with an SD slot and can transmit captured images over a wireless network. When not in range of a wireless network connection, the card makes use of its 2 GB capacity (EYE-FI-2 GB model) until the images can be transferred.[62] Some models geotag their pictures.
- Gruvi - A rare type of microSD card with extra DRM features
Pre-Loaded Content
Towards the end of 2000s many manufacturers saw the need to distinguish their SD cards from one another. One idea was to introduce pre-loaded content onto new SD cards.
SanDisk introduced their SlotMusic which enabled users to buy digital music files already loaded onto their cards.[63]
Market penetration
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b1/Canon_HF100_with_PQI_SDHC_card_20080610.jpg/250px-Canon_HF100_with_PQI_SDHC_card_20080610.jpg)
Secure Digital cards are ubiquitous in consumer electronic devices, and have become the dominant means of storing several gigabytes of data in a small size.
Devices such as netbooks, digital cameras, camcorders, PDAs, mobile phones, video game consoles and digital audio players as well as many others use them.
Smaller devices tend to use microSD or miniSD rather than full sized SD cards.
SD cards are not generally used in mass produced devices where only a small amount of storage is needed due to economic reasons, or where a very large amount of storage is required.
Digital cameras
SD/MMC cards have replaced Toshiba's SmartMedia as the dominant memory card format used in digital cameras. In 2001, SmartMedia had achieved nearly 50% use, but by 2005 SD/MMC had achieved over 40% of the digital camera market and SmartMedia's share had plummeted, with cards not being easily available in 2007.
At this time all the leading digital camera manufacturers use SD in their consumer product lines, including Canon, Casio, Fujifilm, Kodak, Nikon, Olympus, Panasonic, Pentax, Ricoh, Samsung, and Sony. Previously, Olympus and Fujifilm used xD cards exclusively, while Sony only used Memory Stick. As of January 2010[update], they[clarification needed] have added SD functionality to all models released since then.
Some prosumer and professional camera models continue to offer CompactFlash, either on a second card slot or as the only storage, as it has historically offered a better price/capacity ratio and faster transfer rates.
Embedded systems
Unlike CompactFlash, none of the SD card variants supports ATA signaling, limiting their use as solid state drives unless a separate converter chip is used. Although embedded systems exist that use SD cards as their main storage mechanism, a special SD controller chip is often used.[64] In September 2008, the SD Card Association announced the Embedded SD standard to be released in November.[65]
A homebrew hardware hack has brought SD card support to the popular Linksys WRT54G router by utilizing spare GPIO pins on the router's processor and the Linux kernel's MMC module. Transfer speeds of 1.6 Mbit/s can be achieved with this setup.[66]
Openness of standards
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a4/Flash_memory_cards_size.jpg/250px-Flash_memory_cards_size.jpg)
Like most memory card formats, SD is covered by numerous patents and trademarks. Three versions of the SD specification have been set: 1.0, 1.1 and 2.0. These were originally available only after agreeing to a non-disclosure agreement (NDA) that prohibited development of an open source driver, which generated consternation in the open-source and free software communities. However, the system was eventually reverse-engineered, and the non-DRMed sections of the memory cards could be accessed by free software drivers. Since then, the SD Card Association (SDA) has made access to a simplified version of the specification available under a less restrictive license.[67] Although most open-source drivers were written before this, it has helped them to solve some compatibility issues.
In 2006, the SD Card Association also released a simplified version of their host controller interface specification (not to be confused with the physical specification, which covers the actual cards and their protocol) and later also for physical layer, ASSD extensions, SDIO and SDIO Bluetooth Type-A specifications under a disclaimers agreement.[68] Like the physical specification, most of the information had already been discovered before the public release[69] and at least Linux had a fully free driver for it. Still, building a chip conforming to this specification caused the One Laptop per Child project to claim "the first truly Open Source SD implementation, with no need to obtain an SDI license or sign NDAs to create SD drivers or applications."[70]
For the most part, the lack of a complete, open SD specification mainly affects embedded systems and laptop systems, since desktop users generally read SD cards via USB-based card readers. These card readers present a standard USB mass storage interface to memory cards, thus separating the operating system from the details of the underlying SD interface. However, embedded systems (such as portable music players) usually access SD cards directly, and therefore complete programming information is necessary. Desktop card readers are themselves examples of such embedded systems; the manufacturers of these readers have usually paid the SDCA for complete access to the SD specifications. Many notebook computers now include SD card readers not based on USB; device drivers for these essentially access the SD card directly, as in embedded systems.
Royalties for SD card licences are imposed for manufacture and sale of memory cards and host adapters (USD$1,000/year plus membership at USD$1,500/year) but SDIO cards can be made without royalties and MMC host adapters do not require a royalty. MMCs have a seven-pin interface; SD and SDIO have expanded this to nine pins and MMC Plus expands this even further with thirteen pins.
Compared to other flash memory formats
Overall, SD is less open than CompactFlash or USB flash memory drives; these are open standards which can be implemented free of payment for licensing, royalties, or documentation. (CompactFlash and USB flash drives may, however, require licensing fees for the use of associated logos and trademarks.)
However, SD is much more open than Memory Stick, for which no public documentation nor any documented legacy implementation is available. All SD cards can be accessed freely using the well-documented SPI bus.
xD cards are simply 18-pin NAND flash chips in a special package and support the standard command set for raw NAND flash access. Although the raw hardware interface to xD cards is well understood, the layout of its memory contents—necessary for interoperability with xD card readers and digital cameras—is totally undocumented. The consortium that licenses xD cards has not released any technical information to the public.
Template:MultiMediaCard comparison
See also
- SD Card Association
- Comparison of memory cards
- Serial Peripheral Interface Bus (SPI)
- File Allocation Table (FAT16, FAT32) and exFAT
- Flash memory
- slotMusic
- MultiMediaCard
- USB FlashCard
References
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/MSD68GB.jpg/200px-MSD68GB.jpg)
- ^ About - SD Card Association
- ^ "SD Card - SD Card Association".
- ^ SDHC Card - SD Card Association
- ^ SDXC Card - SD Card Association
- ^ Before Using your SDXC Memory Card - SD Card Association
- ^ "Using SD Memory Cards is Easy" (video on YouTube) - SD Card Association
- ^ "Press Releases 17 July 2003". Toshiba. 2003-07-17. Retrieved 2010-08-22.
- ^ SanDisk Introduces The World's Smallest Removable Flash Card For Mobile Phones-The miniSD Card SanDisk.com
- ^ SanDisk Introduces 4GB miniSDHC Flash Card for Mobile Phones SanDisk.com
- ^ SD Association - Press Release - Announced SDXC.
- ^ See Comparison of memory cards.
- ^ kingmaxdigi.com, Kingmax FAQ 2006[dead link]
- ^ Fragmentation and Speed SDCard.org
- ^ "SD cards branded with an upper-case 'I' are faster, yo". Engadget. Retrieved 2010-08-22.
- ^ "SD Association announces UHS-II, ultra high-speed SD card specification". Rob Galbraith. 2011-01-05. Retrieved 2011-01-05.
- ^ a b c d e f SD Card Simplified Specification, Part 1 - Physical Layer, v3.01, 2010
- ^ SDIO Card Simplified Specification, Part E1, v2.00, 2007
- ^ "Windows Phone 7 Secure Digital Card Limitations".
- ^ "Windows Phone 7's microSD mess: the full story (and how Nokia can help you out of it)".
- ^ "Super Talent Technology - DDR and DDR2 Memory". Supertalent.com. Retrieved 2010-08-22.
- ^ http://www.twinmos.com.tw
- ^ http://www.toshiba-memory.com/en/micro_sd_cards.html
- ^ a b c d e "Simplified Physical Layer Specification" (PDF). Retrieved 2010-08-22.
- ^ Thursday, 21 May 2009 10:15 GMT (2009-05-21). "Panasonic launches worlds first Class 10 SDHC cards: Digital Photography Review". Dpreview.com. Retrieved 2010-08-22.
{{cite web}}
: CS1 maint: numeric names: authors list (link) - ^ "Toshiba Plans Faster SD Cards for Early 2010". PCWorld. 2009-08-04. Retrieved 2010-08-22.
- ^ "Press Release 2010 Vol. 8". Pretec. 2010-06-01. Retrieved 2010-08-22.
- ^ "Kingston Technology Company - Flash Memory Cards and X-Speed Ratings". Kingston.com. Retrieved 2010-08-22.
- ^ a b "Simplified Physical Layer Specification v2.00" (PDF). SD Card Association Website. 2006-09-25. p. 129. Retrieved 2010-06-16.
- ^ SD Compatibility, CARDSPEED - Card Readers and Memory Cards, December 1, 2006
- ^ SD Group Technical Committee (September 25, 2006). "Section 4: SD Memory Card Functional Description; 4.3.2: 2 Gbyte Card". SD Specifications, Part 1: Physical Layer Simplified Specification (PDF, HTML) (Version 2.00 ed.). SD Card Association. p. 19. Retrieved 2007-02-23.
{{cite book}}
: External link in
(help)|format=
- ^ "SD Specifications Part 1: Physical Layer Simplified Specification" (PDF). 3.01. SD Card Association. 2010-05-18. Retrieved 2011-01-22.
- ^ "SDHC simplified specifications". Sdcard.org. Retrieved 2010-08-22.
- ^ a b What are SDHC, miniSDHC, and microSDHC? SanDisk.com
- ^ A look into how SDHC will affect the future Nand Flash market. DRAMeXchange, December 2006
- ^ "WinXP SP3 can't read 4GB SD card in multicard reader". Eggheadcafe.com. Retrieved 2010-08-22.
- ^ a b "SD Association". Sdcard.org. Retrieved 2010-08-22.
- ^ Techgage review, including an OCZ 4 GBan OCZ 4 GB SD (non-SDHC) card
- ^ "Microsoft Support 934428 - Hotfix for Windows XP that adds support for SDHC cards that have a capacity of more than 4 GB". Support.microsoft.com. 2008-02-15. Retrieved 2010-08-22.
- ^ "Microsoft Support 939772 - Some Secure Digital (SD) cards may not be recognized in Windows Vista". Support.microsoft.com. 2008-05-15. Retrieved 2010-08-22.
- ^ "Microsoft Support 949126 - A Secure Digital High Capacity (SDHC) card is not recognized on a Windows Vista Service Pack 1-based computer". Support.microsoft.com. 2008-02-21. Retrieved 2010-08-22.
- ^ a b c "Toshiba Sampling First SDXC Flash Memory Cards". 22 December 2009. Retrieved 2010-12-22.
- ^ "SDXC memory cards promise 2TB of storage, 300MBps transfer". Engadget.com. Retrieved 2010-08-22.
- ^ "SDXC on the official website". Sdcard.org. Retrieved 2010-08-22.
- ^ "SDXC signals new generation of removable memory with up to 2 terabytes of storage" (PDF). Retrieved 2010-08-22.
- ^ "SanDisk and Sony to expand Memory Stick Pro and Memory Stick Micro formats". Sandisk.com. Retrieved 2010-08-22.
- ^ "SD Card, Memory Stick formats to reach 2 terabytes, but when? - Betanews". 090108 betanews.com
- ^ "Pretec introduces world's first SDXC card: Digital Photography Review". Dpreview.com. 2009-03-06. Retrieved 2010-08-22.
- ^ "TOSHIBA TO LAUNCH WORLD'S FIRST 64GB SDXC CARD". Toshiba.com. Retrieved 2010-08-22.
- ^ Ng, Jansen (2009-12-22). "Toshiba Sampling First SDXC Flash Memory Cards". DailyTech. Retrieved 2009-12-22.
- ^ "Toshiba's 64GB SDXC card to finally go on sale (in Japan)". CrunchGear. Retrieved 2010-08-09.
- ^ "PANASONIC INTRODUCES NEW 64 GB* AND 48 GB* SDXC MEMORY CARDS, AVAILABLE GLOBALLY IN FEBRUARY 2010". Panasonic. Retrieved 2010-08-09.
- ^ "Canon EOS Rebel T2i / 550D Digital SLR Camera Review". The-Digital-Picture.com
- ^ "Sandisk ships its highest capacity sd card ever". SanDisk. Retrieved 2010-08-09.
- ^ Ng, Jansen (2009-11-24). "Lack of Card Readers Holding Back SDXC Flash Memory Adoption". DailyTech. Retrieved 2009-12-22.
- ^ Ng, Jansen (2009-11-30). "Lenovo, HP, Dell Integrating SDXC Readers in New 32nm Intel "Arrandale" Laptops". DailyTech. Retrieved 2009-12-22.
- ^ a b "Using your SDXC Memory Card". Sdcard.org. Retrieved 2010-08-22.
- ^ "Tuxera exFAT for Embedded systems". Tuxera.com. 2010-06-01. Retrieved 2010-08-22.
- ^ http://www.microsoft.com/downloads/details.aspx?FamilyID=1cbe3906-ddd1-4ca2-b727-c2dff5e30f61&displaylang=en
- ^ "Mac mini (Mid 2010): External ports and connectors". Support.apple.com. 2010-07-08. Retrieved 2010-08-22.
- ^ http://www.theregister.co.uk/2005/07/25/review_sandisk_ultra_ii_sd_plus/
- ^ "I4U News - A DATA Announces SD Card w/ Bi-stable Capacity Display". I4u.com. 2006-11-14. Retrieved 2010-08-22.
- ^ "Home". Eye-Fi. Retrieved 2010-08-22.
- ^ AudioHolics
- ^ "TS-7800 Embedded". Embeddedarm.com. Retrieved 2010-08-22.
- ^ "SD Card Association introduces embedded SD for mobile phones, consumer devices" (PDF) (Press release). SD Card Association. 2008-09-11. Retrieved 2009-06-22.
- ^ "Linksys WRT54G-TM SD/MMC mod - DD-WRT Wiki". Dd-wrt.com. 2010-02-22. Retrieved 2010-08-22.
- ^ "Sharp Linux PDA promotes the use of proprietary SD card, but more open MMC works just fine". Linux.com. Retrieved 2010-08-22.
- ^ Simplified Specification Agreement from the SDA's website
- ^ Reverse-engineered register information for the standard host controller[dead link]
- ^ "OLPC mailing list archive". Mailman.laptop.org. Retrieved 2010-08-22.
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Organizations
- SD Association, sdcard.org
- Membership: $2000/yr for General, $4500/yr for Executive.
- Full Specification: Free for members, $1000/yr for R&D non-members.
- Specifications
- SD Simplified Specifications, sdcard.org, Free
- Microsoft Extensible Firmware Initiative FAT32 File System Specification, 2000, Microsoft
- Software
- Comparisons
- Comparison of numerous memory cards and readers, plus technical information, hjreggel.net
- SDHC Card comparison (german), hardware-infos.com
- Interfacing
- Interfacing to SD cards, great technical details
- Interfacing AVR (Arduino) to SD cards, C source code
- Interfacing ARM to SD cards, C source code
- Interfacing MSP430 to SD cards, C source code, Michigan State University
- Interfacing MAXQ2000 to SD cards, good technical descriptions, C source code, maxim-ic.com
- SD card controller, Verilog source code, opencores.org