2.8 cm sPzB 41
2.8 cm schwere Panzerbüchse 41 | |
---|---|
![]() sPzB 41 at the Canadian War Museum in Ottawa | |
Type | Anti-tank gun |
Place of origin | ![]() |
Service history | |
In service | 1941–1945 |
Used by | ![]() |
Wars | WWII |
Production history | |
Designed | 1940 |
Manufacturer | Mauser-Werke AG |
Produced | 1940–1943 |
No. built | 2,797 |
Specifications | |
Mass | 229 kg (505 lbs) |
Length | 2.69 m (8.82 ft) |
Barrel length | overall: 1,730 mm (with muzzle brake) |
Width | 965 mm (3.16 ft) |
Height | 838 mm (2.74 ft) |
Crew | 3 |
Caliber | 28/20 mm |
Breech | horizontal block |
Recoil | hydrospring |
Carriage | split trail |
Elevation | -5° to 30° |
Traverse | 70° |
Rate of fire | up to 30 rounds per minute |
Muzzle velocity | 1,400 m/s (4,593 ft/s) |
Effective firing range | 500 m (547 yds) |
Template:FixHTML 2.8 cm schwere Panzerbüchse 41 (sPzB 41) or "Panzerbüchse 41" was a German anti-tank weapon working on the squeeze bore principle. Officially classified as heavy anti-tank rifle (German: schwere Panzerbüchse), it would be better described, and is widely referred to, as a light anti-tank gun[1].
Description
Although the sPzB 41 was classified as a heavy anti-tank rifle, its construction was much more typical of an anti-tank gun. Like the latter, it had a recoil mechanism, carriage and shield. The only significant feature the weapon had in common with anti-tank rifles was lack of elevation and traverse mechanisms—the light barrel could be easily manipulated manually.
The design was based on a cone-shaped barrel, with the caliber reducing from 28 mm at the chamber end to only 20 mm at the muzzle. The projectile carried two external flanges; as it proceeded toward the muzzle, the flanges were squeezed down, decreasing the surface area with the result that the projectile was propelled to a higher velocity. The barrel construction resulted in very high muzzle velocity: up to 1,400 m/s. The bore was fitted with a muzzle brake. The horizontal sliding block breech was "quarter-automatic": it closed automatically once a shell was loaded. The gun was equipped with open sight for distances up to 500 m; telescopic sight ZF 1х11 from 3.7 cm Pak 36 anti-tank gun could also be fitted.
The recoil system consisted of hydraulic recoil buffer and spring-driven recuperator. The carriage was of split trail type, with suspension. Wheels with rubber tires could be removed, making the gun significantly lower and therefore easier to conceal; the process took 30–40 seconds. The gun construction allowed toolless dismantling to five pieces, the heaviest of which weighed 62 kg.
Development and production history
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/84/The_British_Army_in_Sicily_1943_NA4961.jpg/220px-The_British_Army_in_Sicily_1943_NA4961.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b4/IWM-E-9090-sPzB-41-19420306.jpg/220px-IWM-E-9090-sPzB-41-19420306.jpg)
The cone-bore principle was first patented in 1903 by a German designer Karl Puff. In the 1920s and 1930s another German engineer, Gerlich, conducted experiments with coned-bore barrels which resulted in an experimental 7 mm anti-tank rifle with muzzle velocity of 1,800 m/s.
Based on these works, in 1939–1940 Mauser-Werke AG developed a 28/20 mm anti-tank weapon initially designated Gerät 231 or MK.8202. In June–July 1940 an experimental batch of 94 (other sources say 30) pieces was given to the army for trials. The trials resulted in some modifications and in 1941 mass production of what became 2.8 cm schwere Panzerbüchse 41 started. One piece cost 4,520 Reichsmarks (for the sake of comparison, one 5 cm Pak 38 gun cost 10,600 Reichsmarks). The last gun was built in 1943; the main reason for the discontinuance was lack of tungsten for projectiles.
Production of sPzB 41, pcs.[2] | |||||
1940 | 1941 | 1942 | 1943 | Total | |
94 | 349 | 1030 | 1324 | 2797 |
Production of ammunition for sPzB 41, thousands.[2] | |||||
Shell type | 1940 | 1941 | 1942 | 1943 | Total |
Fragmentation | - | 9.2 | 373.3 | 130.1 | 512.6 |
Armour-piercing | 156.2 | 889.5 | 270.0 | 278.1 | 1602.8 |
Organization and employment
sPzB 41 was used by some motorized divisions and by some Jäger (light infantry), Gebirgsjäger (mountain) and Fallschirmjäger (paratrooper) units. Some guns were supplied to anti-tank and sapper units.[3] The weapon was employed on the Eastern Front from the beginning of the hostilities (on 1 June Wehrmacht possessed 183 pieces) until the end of the war and also saw combat in the North African Campaign and on the Western Front in 1944–1945.
Short-range shots from sPzB 41 could penetrate most of the WWII armour; a lucky shot could even damage heavy tanks such as KV-1 and IS-2 (at least in one instance a projectile even penetrated the lower front plate of the latter).
Variants
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/10/Bundesarchiv_Bild_101I-258-1312-36%2C_S%C3%BCdfrankreich%2C_schwere_Panzerb%C3%BCchse_41.jpg/220px-Bundesarchiv_Bild_101I-258-1312-36%2C_S%C3%BCdfrankreich%2C_schwere_Panzerb%C3%BCchse_41.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/94/Bundesarchiv_Bild_101I-732-0111-15A%2C_Russland%2C_Sch%C3%BCtzenpanzer_%C2%BBDiv._Gro%C3%9Fdeutschland%C2%AB.jpg/220px-Bundesarchiv_Bild_101I-732-0111-15A%2C_Russland%2C_Sch%C3%BCtzenpanzer_%C2%BBDiv._Gro%C3%9Fdeutschland%C2%AB.jpg)
- 2.8 cm sPzB 41 leFl 41 (2.8 cm schwere Panzerbüchse 41 auf leichter Feldlafette 41): variant developed for paratrooper units. Used lightweight carriages without suspension; wheels were replaced by small rollers; shield was typically removed. The resulting weapon weighed only 139 kg (118 kg without rollers). The carriage supported a 360° field of fire, and elevation ranged from -15° to 25°.
- 2.8 cm KwK 42: tank gun modification. Twenty-four were produced. It is not clear if they were ever used.
The sPzb 41 was also mounted on SdKfz 250 half-tracks; this variant was designated SdKfz 250/11. A few were mounted on SdKfz 221 armored cars.
Service
Squeeze bore guns saw only limited use in World War II. Manufacturing of such weapons was impossible without advanced technologies and high production standards. The only country except Germany to bring such weapons to mass production was Britain with Littlejohn adaptor which—although not a gun by its own right—used the same principle. An attempt of Soviet design bureau headed by V. G. Grabin in 1940 failed because of technological problems[2]. In the US, reports about the sPzB 41 inspired a series of experiments with 28/20 barrels and taper bore adaptors for the 37mm Gun M3; the work started in September 1941 and continued throughout the war, with no practical results[4].
sPzB 41 combined good anti-armor performance at short range and high rate of fire with small, lightweight (for anti-tank gun), dismantleable construction. However, it also had several shortcomings, such as:
- The barrel was hard to manufacture and had short service life (about 500 shots)
- Very weak fragmentation shell
- Use of tungsten for armor-piercing shells
- Short effective range
- Relatively weak behind-armour effect.
Some authors that criticize the sPzB 41 concentrate mainly on short service life of its barrel. However, a chance of survival after 500 short-range shots was slim anyway.[citation needed] It should also be noted that high-velocity guns with "normal" barrel construction also had short service life, e.g. for the Soviet 57-mm ZiS-2 it was about 1,000 shots. In the end, the factor that brought the production of sPzB 41 to a halt was the shortage of tungsten.
Ammunition
There were two shell models for sPzB 41: the armor-piercing 2.8 cm Pzgr.41 and the fragmentation 2.8 cm Sprg.41.
The Pzgr.41 had a tungsten carbide core, a soft steel casing and a magnesium alloy ballistic cap. The core was 40 mm long and 10.9 mm in diameter and contained about 9,1% of tungsten.
Available ammunition[2] | |||||
Type | Model | Weight, kg | Filler | Muzzle velocity, m/s | Range, m |
APCNR-T | 2.8 cm Pzgr.41 | 0.125 | - | 1,430 | 500 |
Fragmentation | 2.8 cm Sprg.41 | 0.093 | 5 g, phlegmatized PETN | 1,400 | 1,000 |
Armour penetration table | ||
APCNR-T projectile 2.8 cm Pzgr.41 | ||
Distance, m | Meet angle 60°, mm | Meet angle 90°, mm |
100 | 52[2], 69[5] | 75[3] |
300 | 46[2] | |
400 | 40[3] | |
500 | 40[2], 52[5] |
Notes
- ^ E.g. US War Department Intelligence Bulletin, Nov. 1944
- ^ a b c d e f g Shirokorad A. B. The God of War of the Third Reich.
- ^ a b c Ivanov A. Artillery of Germany in Second World War.
- ^ Zaloga, Delf. US Anti-tank Artillery 1941–45, p 6–7.
- ^ a b Guns vs Armour, from Hogg, Ian V. German Artillery of World War Two.
References
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Gander, Terry and Chamberlain, Peter. Weapons of the Third Reich: An Encyclopedic Survey of All Small Arms, Artillery and Special Weapons of the German Land Forces 1939-1945. New York: Doubleday, 1979 ISBN 0-385-15090-3.
- Hogg, Ian V. German Artillery of World War Two. 2nd corrected edition. Mechanicsville, PA: Stackpole Books, 1997. ISBN 1-85367-480-X.
- Shirokorad A. B. The God of War of the Third Reich. M. AST, 2002 (Широкорад А. Б. - Бог войны Третьего рейха. — М.,ООО Издательство АСТ, 2002., ISBN 978-5-17-015302-2).
- Ivanov A. Artillery of Germany in Second World War. SPb Neva, 2003 (Иванов А. - Артиллерия Германии во Второй Мировой войне. — СПб., Издательский дом «Нева», 2003., ISBN 978-5-7654-2634-0).
- Zaloga, Steven J., Brian Delf. US Anti-tank Artillery 1941–45 (2005). Osprey Publishing (New Vanguard 107). ISBN 978-1-84176-690-4.
- Guns vs Armour: German Guns up to 30mm calibre