Chevrolet Brookwood

Chevrolet Brookwood
Overview
Manufacturer	Chevrolet (General Motors)
Production	1958–1961 1969–1972
Assembly	Oshawa, Ontario, Canada Arlington, Texas, United States
Body and chassis
Class	Full-size
Layout	FR layout

The Chevrolet Brookwood was a series of station wagons produced by Chevrolet from 1958 to 1961, and again from 1969 to 1972.

1958

First generation
1958 Chevrolet Brookwood at the June 2012 Minnesota State Fairgrounds in St. Paul, Minnesota
Overview
Model years	1958
Assembly	Arlington, Texas, United States Oshawa, Ontario, Canada
Designer	Clare MacKichan's Design Team
Body and chassis
Class	Full-size
Body style	4-door station wagon
Layout	FR layout
Platform	GM B platform
Related	1958 Chevrolet Delray (especially sedan delivery) 1958 Chevrolet Biscayne 1958 Chevrolet Bel Air 1958 Chevrolet Impala 1958 Chevrolet Yeoman 1958 Chevrolet Nomad
Powertrain
Engine	235.5 cu in (3.9 L) Blue Flame I6 283 cu in (4.6 L) V8 348 cu in (5.7 L) V8
Transmission	3-speed manual 4-speed manual 2-speed Powerglide automatic
Dimensions
Wheelbase	117.5 in (2,984 mm)
Curb weight	6-cyl 6-passenger 3,748 pounds (1,700 kg) 6-cyl 9-passenger 3,837 pounds (1,740 kg) V8 6-passenger 3,751 pounds (1,701 kg) V8 9-passenger 3,839 pounds (1,741 kg)
Chronology
Predecessor	1957 Chevrolet 210 Townsman 6-passenger 4-door wagon 1957 Chevrolet 210 Beauville 9-passenger 4-door wagon
Successor	1959 Chevrolet Parkwood 6-passenger 4-door wagon 1959 Chevrolet Kingswood 9-passenger 4-door wagon

Introduced in 1958 as Chevrolet's mid-priced station wagon, Brookwoods were trimmed in line with Chevrolet's mid-priced Chevrolet Biscayne models. The Brookwood offered for the 1958 model year was a 4-door station wagon, available in either six- or nine-passenger models.

Design

For 1958, Chevrolet models were redesigned longer, lower, and heavier than their 1957 predecessors. The first ever production Chevrolet big block V8, the 348 cu in (5,700 cc), was now an option. Chevrolet's design for the year fared better than its other GM offerings, and lacked the overabundance of chrome found on Pontiacs, Oldsmobiles, Buicks and Cadillacs. Complementing Chevrolet's front design was a broad grille and quad headlights that helped simulate a 'Baby Cadillac'; the wagon's tail received a fan-shaped alcove on both side panels, similar to the sedan's, but wagon's housed single tail lights instead of dual (triple on Impala) to accommodate the tailgate. Despite being a recession year, consumers made Chevrolet the No. 1 make of automobile (beating Ford, which held the title in 1957) and the Bel Air was at the core of Chevrolet's popularity. The Nomad station wagon name also reappeared in 1958 when the vehicle bowed as the premium four-door Chevrolet station wagon, lacking the unique styling of the 1955-57 Nomads. A new dash was used. The value of a drag coefficient for 1958 Chevy wagons is estimated by a-c, is Cd = 0.6.

Brookwood as Chevy's mid-range wagon for 1958 only

For its first year, Chevrolet's 6 and 9-passenger Brookwood wagons replaced 1957 Chevrolet 210 Townsman 6-passenger 4-door wagon and 1957 Chevrolet 210 Beauville 9-passenger 4-door wagon as their mid-range station wagon model between their plainer 1958 only Yeoman and the now 4-door only top-of-the-line Nomad. Like the 1958 Nomad, the 1958 Brookwood was also 4-door only. The next year Brookside would become the base model wagon and offer a 2-door effectively replacing Yeoman. Buyers could order any engine and transmission choice, including the 348 V8 and the fuel-injected 283 V8 engines.

Safety

Like the rest of Chevrolet's 1958 full size car line up, the Brookwood featured Chevrolet's new "Safety-Girder" cruciform frame. Similar in layout to the frame adopted for the 1957 Cadillac, it featured box-section side rails and a boxed front cross member that bowed under the engine, these "x-frames" were used on other 1958 to 1964 Chevys, as well as Cadillac. The rear was tied together by a channel-section cross member. This design was later criticized as providing less protection in the event of a side impact collision, but would persevere until 1965.

1959-1960

Second generation
Rusty '59 Chevrolet Brookwood (Laval Bike & Tattoo Show '12)
Overview
Model years	1959-1960
Body and chassis
Class	Full-size
Body style	2-door wagon 4-door wagon
Layout	FR layout
Platform	GM B platform
Related	1959–1960 Chevrolet Biscayne 1959–1960 Chevrolet Bel Air 1959–1960 Chevrolet Impala 1959–1960 Chevrolet Parkwood 1959–1960 Chevrolet Kingswood 1959–1960 Chevrolet Nomad 1959–1960 Chevrolet El Camino
Dimensions
Wheelbase	119.0 in (3,023 mm)
Chronology
Predecessor	1958 Chevrolet Yeoman 2-door station wagon 1958 Chevrolet Yeoman 4-door station wagon

For the second time in as many years, Chevrolet again came up with a totally new car. From the front or rear the 1959 Chevrolets resembled nothing else on the road. From the headlights, placed as low as the law would allow, to the cats-eye tail lights, the 1959 Chevrolet was a brand new car with all new sheet metal. The most visual new change was the flat, wing shaped tailfins. The car was built on a 119 in (3,000 mm) wheelbase and was 211 inches (5,400 mm) long-which was 11 in (280 mm) longer than the 1957 model. This made Chevrolet the longest car in the low-priced range, whereas two years before it had been the shortest. In addition, the car was 3 in (76 mm) wider outside and had 5 in (130 mm) more width inside than it did in 1958, through the reduction of door thickness. The frame GM X frame had no side rails.

Wagons were still classed by themselves, but had model numbers matching the car series. Chevrolet eliminated its entry-level Delray based Yeoman models and the Biscayne-based Brookwood became Chevrolet's least expensive wagon models. Brookwoods were now available in two-door or four-door body styles, both in six-passenger configuration only. The new Parkwood 6-passenger and new Kingswood 9-passenger wagons had Bel Air's model number, and as such were the middle range wagons. A variety of speed options, such as fuel injection, special cams and lowered compression, gave horsepower ratings up to 315. The Nomad was still the top Chevy wagon. A parking brake warning light was optional. Under the hood, little change took place for '59 Chevys.

Few alterations were made for 1960. The new models were refinements of the 1959 style with a much more restrained front end, the return of the double cone tail lights of 1958 rather than the startling "cat's eyes" of 1959. Under the hood, things remained constant. Fuel injection was no longer available, but with the 348 cubic inch engine, a horsepower rating of 335 at 5800 rpm was now achieved. This involved the use of three double-barrel carburettors, a special cam and an 11.25:1 compression ratio, all sold as a package.

2 Door Wagons

Like the 1958 Yeoman 2-door. The 1959 & '60 Brookside 2-doors, are preferred by hotrodders and collectors over their 4-door counterparts. The two-door variant would become the basis for the new-for-1959 El Camino. Unlike the Brookwood, the El Camino could be ordered in trim levels corresponding to the entire full-sized car line including the Impala. 1960 marked the end of Chevy's full size 2-door wagons, and the end of 2-door Chevy wagons all together until the 1964 Chevelle 300 2-door wagon.

Safety

Chevrolet's 1959 & '60 Brookwood (as well as the rest of Chevy's full size line up) still featured Chevrolet's "Safety-Girder" cruciform frame introduced in '58. Similar in layout to the frame adopted for the 1957 Cadillac, it featured box-section side rails and a boxed front cross member that bowed under the engine, these "x-frames" were used on other 1958 to 1964 Chevys, as well as Cadillac. The rear was tied together by a channel-section cross member. This design was later criticized as providing less protection in the event of a side impact collision, but would persevere until 1965.

1961

Third generation
Overview
Model years	1961
Body and chassis
Class	Full-size
Body style	4-door station wagon
Layout	FR layout
Platform	B-body
Related	1961–1964 Chevrolet Biscayne 1961–1964 Chevrolet Bel Air 1961–1964 Chevrolet Impala 1961 Chevrolet Parkwood 1961 Chevrolet Nomad
Powertrain
Engine	235 cu in (3.9 L) Blue Flame I6 283 cu in (4.6 L) Turbo Fire V8 348 cu in (5.7 L) W-series Turbo Thrust V8
Transmission	3-speed manual 4-speed manual Powerglide automatic
Dimensions
Wheelbase	119 in (3,000 mm)
Length	209.3 in (5,320 mm)
Chronology
Successor	1962 Chevrolet Biscayne wagon

For 1961, full size Chevrolets again had a totally new body, not just new sheet metal. Its wheelbase remained 119 in (3,000 mm), but its length was now reduced slightly to 209.3 in (5,320 mm). All engines options of the previous year remained in effect with the standard engines being the 235.5 CID Six of 135 hp (101 kW) or the 283 CID V8 of 170 hp (130 kW). The V8 cost $110 more than the Six and weighed 5 lb (2.3 kg) less. In 1961, the two-door body style was dropped, but the nine-passenger model returned. GM discontinued the Chevrolet Brookwood name for 1962, instead naming their station wagons after their series names: Biscayne, Bel Air and Impala.

Safety

Chevrolet's 1961 Brookwood (as well as all other full size Chevrolets) featured a shortened version of Chevrolet's "Safety-Girder" cruciform frame introduced in '58. Similar in layout to the frame adopted for the 1957 Cadillac, it featured box-section side rails and a boxed front cross member that bowed under the engine, these "x-frames" were used on other 1958 to 1964 Chevys, as well as Cadillac. The rear was tied together by a channel-section cross member. This design was later criticized as providing less protection in the event of a side impact collision, but would persevere until 1965.

Chevrolet Brookwood Discontinuation and Replacement

GM discontinued the Chevrolet Brookwood wagon nameplate (as well as the Parkwood and Nomad wagon names) for 1962, instead naming their station wagons after their series names: Biscayne (replacing Brookwood directly), Bel Air and Impala. The 1962-'64 Biscayne, Bel Air, and Impala wagons were very similar to Chevy's 1961 wagon models.

1969–1972

Fourth generation
1972 Chevrolet Brookwood w/ custom wheels
Overview
Production	1969–1972
Model years	1969–1972
Assembly	Oshawa, Ontario, Canada
Body and chassis
Body style	4-door station wagon
Platform	B-body
Related	Chevrolet Bel Air Chevrolet Impala Chevrolet Caprice Chevrolet Biscayne Chevrolet Kingswood Pontiac Bonneville Pontiac Catalina/Laurentian Pontiac Parisienne Oldsmobile 88 Buick LeSabre
Powertrain
Engine	250 cu in (4.1 L) I6 (1969 only) 350 cu in (5.7 L) V8 400 cu in (6.6 L) V8 454 cu in (7.4 L) V8
Transmission	3-speed manual 3-speed Turbo-Hydramatic automatic
Chronology
Predecessor	1968 Chevrolet Biscayne wagon
Successor	1973 Chevrolet Impala wagon

In 1969, each Chevrolet station wagon regained its own unique model name. Brookwood, again related to the Biscayne, was assigned to the least expensive model, followed by the Townsman, Kingswood and Kingswood Estate models. Brookwood models could be ordered with either six-cylinder or V8 engines.

1970 model Chevrolet full-size station wagons were nearly identical to the 1969 models, the biggest changes being the elimination of six-cylinder availability and the redesign of the front fascia, which did away with the previous year's loop bumper-grille assembly in favor of a more traditional front bumper and grille design.

In 1971 GM restyled its Chevrolet full-size models; all full-size station wagons, including the Brookwood, received GM's clamshell rear gate assembly with power rear window. Unlike the door-gate assembly offered in 1969 and 1970, the clamshell gate design required raising the rear window up into the roof of the wagon, while the gate slid downward and under the cargo floor. GM offered an optional electric motor assist for the gate on its lower-priced models after consumer complaints about the weight of the gate and difficulty many had in manually lifting the gate into locking position. Midway through the 1971 model year, all full-sized station wagons, including Brookwoods, received the previously optional TurboHydraMatic automatic transmission as standard equipment. Despite the series economy roots, virtually all previous Brookwoods had been built and sold with the automatic transmission.

Brookwoods received Chevrolet's front fascia restyle in 1972 and could be ordered with any number of options from full wheel covers to a vinyl top. For 1972, GM listed a four-door Chevrolet sedan and the Brookwood in that year's Biscayne line.

End of Brookwood

For 1973, GM eliminated the Chevrolet Biscayne and Brookwood names in the U.S.. The Biscayne sedan & wagon was sold in Canada until the 1975 model year. For 1973 in the U.S., Chevrolet continued to offer full sized station wagons in Impala and Caprice Estate forms. Cheaper compact station wagons like the Vega wagon were gaining some popularity as gas prices began to soar.

From 1969 until 1972 the car was built at the Oshawa Car Assembly in Ontario.