Cranbourne line

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Primefac (talk | contribs) at 04:15, 16 October 2016 (→‎top: replace parameters for merged template using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Cranbourne
Overview
Connecting linesPakenham
Former connectionsSouth Gippsland
Stations3
Service
TypeMelbourne suburban service
SystemMetro Trains Melbourne, Pacific National cement trains
ServicesUsually runs express between South Yarra and Caulfield in the day and shuttle from/to Dandenong at night
Rolling stockComeng, Siemens
History
Completed1886
Technical
Line length14 km (8.7 mi)
Number of tracksSingle track with crossing loops
Route map
Melbourne railways map.gif

The Cranbourne railway line is a suburban electric railway service operated by Metro Trains Melbourne in the south-eastern suburbs of Melbourne, Australia. It operates along the inner section of the former South Gippsland line.

Description

The line traverses flat country and there is little in the way of earthworks. There are several level crossings along the line. The area around Cranbourne is one of Melbourne's main growth areas, giving the line considerable potential for growing patronage.

Infrastructure

The line, which branches from the Pakenham line at Dandenong, is single track throughout, with a crossing loop at Lynbrook towards the Cranbourne end of the line. Trains can also cross at Cranbourne itself, which has two platforms. Power signalling is provided throughout, being controlled from Dandenong. There are no intermediate terminating facilities, however stabling sidings were recently constructed and opened in Cranbourne.

Beyond Cranbourne there is a siding between Cameron Street and Berwick-Cranbourne Road near the Cranbourne "Shed" and the new Hunt Club Estate. The line then continues to Leongatha, but between Cranbourne and Nyora, the line is unserviceable. Government plans have the line to Leongatha being rebuilt and reopened, but there appears to be little happening in this regard.

Services

On weekdays, Cranbourne line services run express between South Yarra and Caulfield between 7 am and 8 pm, and operates as shuttles to and from Dandenong, connecting with a Pakenham line train, at all other times. During peak, some services will originate and terminate at Westall or Dandenong running express between South Yarra and Caulfield. During the morning peak, these short services may also instead run express between Richmond and Caulfield outbound.

On weekends, Cranbourne line services run express between South Yarra and Caulfield between 10 am and 7 pm, and stops all stations between Flinders Street and Cranbourne from 6:45 am to 10 am (9:30 am to 10 am on Sundays) and from 7 pm to 8:15 pm. At all other times services operate as shuttles to and from Dandenong, connecting with a Pakenham line train.

Weekday morning and weekend services run anticlockwise through the City Loop, while weekday afternoon services run clockwise.

The only freight traffic was cement traffic from Waurn Ponds near Geelong to Lyndhurst, this ended in 2009 after Pacific National increased the costs charged to Blue Circle Southern.[1]

History

The Cranbourne line opened in December 1886 as part of the section to Tooradin. This was the first section of the South Gippsland Railway, with passenger services to Leongatha withdrawn on 24 July 1993. The last train ran on 24 July 1993 with P class locomotive hauling an FSH set to Leongatha and back to Melbourne.[2] Shortly after the Leongatha service was axed, V/Line's then newly introduced Sprinters railcars were tested along the line from Dandenong to Cranbourne for a short period of time until the electrification of the line to Cranbourne was completed in March 1995.[3]

In November 1993, Train Order Working replaced Electric Staff safeworking to Cranbourne, then on 24 March 1995, the electrification and power signalling on the Cranbourne line was commissioned. Funded as part of the Federal Government ‘Building Better Cities’ program,[4] the $27 million project included an upgraded Dandenong station and a new Merinda Park station at Cranbourne North[5] (the line had previously been electrified for a short distance to the Commonwealth Engineering siding).

The last regular train running though and beyond Cranbourne was on 16 January 1998, when the AGM Siding (near Nyora) to Spotswood station sand train ceased operation.[6]

In 2008, work started on the construction of six train stabling sidings at Cranbourne station at a cost of $37 million, to enable more trains to run on the line at peak times without duplicating the line,[7][8] which was completed in November the same year, along with a major upgrade of the station and the extension of platform 2.

On 3 November 2012, a truck travelling along Abbotts Road, in Dandenong South, was hit by a Cranbourne-bound train at about 11:40am. The accident caused the train to jack-knife, causing severe damage to the train, as well as the track and overhead infrastructure. One passenger died at the scene of the accident, having suffered a heart attack, while at least 13 others, including the train driver, were injured.[9]

Line guide

Bold stations are terminuses, where some train services terminate; italic stations are staffed.

Branches from the Pakenham line at Dandenong.

Cranbourne Line
0.0 km
Flinders Street (FSS)
Zone 1
2.4 km
Richmond (RMD)
Zone 1
City Link
4.2 km
South Yarra (SYR)
Zone 1
5.4 km
Hawksburn (HKN)
Zone 1
6.7 km
Toorak (TOR)
Zone 1
7.4 km
Armadale (ARM)*
Zone 1
8.9 km
Malvern (MAL)*
Zone 1
10.6 km
Caulfield (CFD)
Zone 1
12.3 km
Carnegie (CNE)*
Zone 1
13.2 km
Murrumbeena (MRB)*
Zone 1
14.2 km
Hughesdale (HUG)
Zones 1 & 2
15.4 km
Oakleigh (OAK)
Zones 1 & 2
17.0 km
Huntingdale (HUN)*
Zones 1 & 2
19.2 km
Clayton (CLA)
Zone 2
21.4 km
Westall (WTL)
Zone 2
23.3 km
Springvale (SPG)
Zone 2
24.4 km
Sandown Park (SNP)
Zone 2
25.1 km
Noble Park (NPK)
Zone 2
27.8 km
Yarraman (YMN)
Zone 2
30.0 km
Dandenong (DNG)
Zone 2
Pakenham line
38.362 km
Lyndhurst (Formerly for freight, now closed)
Lynbrook loop
39.3 km
Lynbrook (LYK)
Zone 2
42.5 km
Merinda Park (MPK)
Zone 2
44.0 km
Cranbourne (CBE)
Zone 2
? km
Cranbourne East (Proposed)
Zone 2

References

  1. ^ Daniel Breen (24 March 2009). "Freight network goes off the rail". Geelong Advertiser. www.geelongadvertiser.com.au. Retrieved 4 April 2009.
  2. ^ Chris Banger (March 1997). "Rail Passenger Service Withdrawals Since 1960". Newsrail. Australian Railway Historical Society (Victorian Division). pp. 77–82.
  3. ^ 'High speed with Sprinter', Tracks Magazine (Railways of Australia Network)): pages 14-17. January, February, March 1992
  4. ^ Lyndsay Neilson. "Appendix 1: Funding Allocation, Victorian Area Strategies". The ‘Building Better Cities’ program 1991-96: a nation-building initiative of the Commonwealth Government. epress.anu.edu.au. Retrieved 1 November 2010.
  5. ^ Fiddian, Mark (1997). Trains, Tracks, Travelers. A history of the Victorian Railways. South Eastern Independent Newspapers. p. 154. ISBN 1-875475-12-5.
  6. ^ "Farewell – The Sand Train". Newsrail. Australian Railway Historical Society (Victorian Division). February 1998. pp. 71–76.
  7. ^ "Media Release: CRANBOURNE STATION TRAIN STABLING PROJECT ON TRACK". Minister for Public Transport Media Release. www.dpc.vic.gov.au. Retrieved 24 April 2008.
  8. ^ "VICSIG – Infrastructure – Cranbourne Sidings and Station". www.vicsig.net. Retrieved 24 April 2008.
  9. ^ Houston, Hingston, Stark, Cameron, Chris, Jill (3 November 2012). "Safety fears after fatal crash". The Age. Retrieved 3 November 2012.{{cite news}}: CS1 maint: multiple names: authors list (link)

External links