Heckler & Koch P7
P7 | |
---|---|
Type | Semi-automatic pistol |
Place of origin | West Germany |
Service history | |
Used by | See Users |
Production history | |
Designer | Helmut Weldle |
Designed | 1976 |
Manufacturer | Heckler & Koch |
Produced | 1979–2008 |
Variants | See Variants |
Specifications | |
Mass | PSP: 785 g (27.7 oz) P7M8: 780 g (28 oz) P7M13: 850 g (30 oz) P7K3: 775 g (27.3 oz) (.22 LR) / 760 g (27 oz) (.32 ACP) / 750 g (26 oz) (.380 ACP) P7M10: 1,250 g (44 oz) P7PT8: 720 g (25 oz) |
Length | PSP: 166 mm (6.5 in) P7M8, P7PT8: 171 mm (6.7 in) P7M13, P7M10: 175 mm (6.9 in) P7K3: 160 mm (6.3 in) |
Barrel length | PSP, P7M8, P7M13, P7M10, P7PT8: 105 mm (4.1 in) P7K3: 96.5 mm (3.8 in) |
Width | PSP, P7M8: 29 mm (1.1 in) P7M13, P7M10: 33 mm (1.3 in) P7K3: 29 mm (1.1 in) |
Height | PSP: 127 mm (5.0 in) P7M8: 129 mm (5.1 in) P7M13: 135 mm (5.3 in) P7M10: 145 mm (5.7 in) P7K3: 125 mm (4.9 in) |
Cartridge | PSP, P7M8, P7M13: 9×19mm Parabellum P7K3: .22 Long Rifle, .32 ACP, .380 ACP P7M10: .40 S&W P7PT8: 9×19mm PT P7M7: .45 ACP (prototype only) |
Action | PSP, P7M8, P7M13, P7M10: Gas-delayed blowback P7K3, P7PT8: Straight blowback |
Muzzle velocity | PSP, P7M8, P7M13: 351 m/s (1,152 ft/s) P7K3: 275 m/s (902.2 ft/s) (.22 LR) / 330 m/s (1,082.7 ft/s) (.32 ACP) / 305 m/s (1,000.7 ft/s) (.380 ACP) P7M10: 300 m/s (984.3 ft/s)-345 m/s (1,131.9 ft/s) P7PT8: ~410 m/s (1,345.1 ft/s) |
Feed system | PSP, P7M8, P7K3, P7PT8: 8-round box magazine P7M13: 13-round box magazine P7M7: 7-round box magazine P7M10: 10-round box magazine |
Sights | Front blade, rear notch 148 mm (5.8 in) sight radius |
The P7 is a German 9×19mm semi-automatic pistol designed by Helmut Weldle and produced by Heckler & Koch GmbH (H&K) of Oberndorf am Neckar. It was revealed to the public for the first time in 1976 as the PSP (Polizei-Selbstlade-Pistole—"police self-loading pistol").[1]
History
The decision to equip West German police with an advanced 9mm service pistol and replace existing 7.65mm Browning-caliber weapons was prompted after the 1972 Munich Olympics Massacre.[1] The new firearm was to meet the following requirements: chamber the 9×19mm Parabellum cartridge, weigh no more than 1,000 g (35 oz), the pistol's dimensions would not exceed 180 × 130 × 34 mm, it should have a muzzle energy of no less than 500 J and a service life of at least 10,000-rounds. The pistol was also to be fully ambidextrous, safe to carry with a loaded chamber and able to be quickly drawn and ready to fire instantly.[1] As a result of a competitive bid the German police forces selected three different pistols into service: the Swiss SIG Sauer P225 (designated the P6) and two German designs—the P7 (officially designated the PSP) and the Walther P5.
Series production of the P7 started in 1979. Shortly after, the pistol was adopted by the German Federal Police's counter-terrorism unit (GSG 9) and the German Army's special forces formations.[1] The P7 was produced primarily by H&K but also under license by the Greek defense firm Hellenic Arms Industry[citation needed] as well as in Mexico by the Departamento de Industria Militar (DIM), as a sidearm for general officers and staff.[2] The pistol was also exported to several countries.
Design details
Operating mechanism
The P7 is a semi-automatic blowback-operated firearm. It features a unique gas-delayed blowback locking system modeled on the Swiss Pistole 47 W+F (Waffenfabrik Bern) prototype pistol[3] (and ultimately on the Barnitzke system first used in the Volkssturmgewehr 1-5[4]), which used gas pressures from the ignited cartridge and fed them through a small port in the barrel (in front of the chamber) to retard the rearward motion of the slide. This is accomplished by means of a piston contained inside a cylinder located under the barrel that opposes the rearward motion of the slide until the gas pressure has declined—after the bullet has left the barrel—hence allowing the slide to end its rearward motion, opening the breech and ejecting the empty cartridge case.[5]
The chamber has 18 flutes that aid in the extraction process by allowing combustion gases to flow between the fired case and the chamber walls, preventing the case from "sticking" to the chamber walls. The drawback of this system is that the breech "opens" slightly prematurely to allow the slide to initiate its rearward motion. The high temperature gases cycling through a tube located below the chamber area and above the trigger made the early versions of this pistol uncomfortable, according to some, to shoot after the content of two magazines were fired due to heating. The advantages of this system are a simpler manufacturing process due to the absence of a locking system and a high mechanical accuracy due to the barrel being fixed in the frame; the barrel does not execute any sort of lateral or vertical movement during the operating cycle as with the Browning cam-action systems common to many other locked breech pistols.[6]
Features
The P7's spring extractor is contained within the slide, while the fixed ejector is a surface on the slide catch.
The grip of this pistol features a built-in cocking lever located at the front of the grip. Before the pistol can be fired, this lever must be squeezed; thus this lever acts as a safety. The pistol is striker fired.[7] Squeezing the cocking lever with a force of 70 N (15.7 lbf) cocks the firing pin. Once fully depressed, only 2 pounds of force are required to keep the weapon cocked. The weapon is then fired by pressing the single stage trigger rated at approximately 20 N (4.5 lbf) As long as the lever is depressed, the weapon fires like any other semi-automatic pistol. If the lever is released, the weapon is immediately de-cocked and rendered safe. This method of operation dispensed the need for a manual safety selector while providing safety for the user carrying the pistol with a chambered round, and increased the speed with which the pistol could be deployed and fired. The trigger and firing mechanism's method of operation (and the unique slide catch) were protected by U.S. patent 4,132,023, issued on January 2, 1979.[8]
The P7 is fed from a single-stack box magazine with a capacity of 8 rounds,[9] which is held inside the firearm's frame with a release located at the heel of the grip. After the last round has been fired, the slide will remain open thanks to a slide catch that can be released by pulling the slide further back or pressing the squeeze cocker.
The firearm uses a fixed, polygonal rifled barrel (hexagonal with a 250 mm twist rate) and a fixed notched iron sight with contrast dots that enable shooting in low-level lighting conditions. The pistol is completely ambidextrous and two-handed use is enhanced through the use of a profiled and enlarged trigger guard.[1]
Between 1982–1983 the P7 received several modifications, mainly to address American market demand and shooter preferences. These modifications resulted in the P7M8 model. A new magazine release lever (available on both sides of the frame) was installed just beneath the trigger guard, which forced designers to modify both the pistol's frame and magazine.[10] The trigger guard was equipped with a synthetic heat shield that protects the shooter from excessive heating and a lanyard attachment loop was added in place of the previous magazine heel release. The firing pin and its bushing were also changed.
Variants
Based on the P7 several other variants were built: the P7PT8,"P7M8", P7M13, P7K3, P7M10 and the P7M7, none of which remain in production. Production of the "P7" heel release design ended in 1997 with the KH date coded pistol marked "P7" on the Grip and "PSP" on the slide.
The P7PT8 is a dedicated, straight blowback training pistol modified for use with the 9×19mm PT training cartridge (made by Geco) with a plastic bullet (weighing 0.42 g).[11] A "floating chamber" adapter is used inside the barrel which enhances felt recoil for use with the special ammunition. The pistols were marked with blue dots on both sides of the slide to differentiate the P7PT8 from other P7 pistols that can chamber lethal ammunition.[11] To date about 200 pistols of this type were produced that are used mainly for simulated firing in enclosed spaces.
The P7M8 is the P7's counterpart with larger trigger guard, lengthened trigger, heat shield, thumb operated magazine release, larger rear sight dovetail, protruding firing pin bushing and lanyard ring. Production began in 1983 and continued until 2007. A final production run of 500 P7M8 pistols were produced under the AH date code (year 2007).[12] Each is marked on the right side of the slide with X of 500. Other than the slide marking no other features nor accessories were added to the usual kit. To commemorate 25 years of P7 production, H&K offered a limited run of P7M8 "Jubilee" edition. Only 500 examples were ever made. Included in the package were a wooden lockable presentation case, P7 challenge coin, and special markings. The slide's top-left radiused edge has the designer's name (Helmut Weldle) and "1 von 500" (German, and including the double quotes; it translates to "1 of 500" in English) etched onto its surface. The wooden grips were made by Karl Nills and had the H&K logo.
The P7M13 is the P7’s counterpart with a double-column magazine and a 13-round capacity.[13] This pistol was offered (unsuccessfully) to the US Army. A variant known as the P7M13SD was produced in limited numbers exclusively for German special forces, featuring a longer (compared to the P7M13) threaded barrel and a sound suppressor.[13]
The P7K3 is a shortened version of the P7 (inspired by the HK4 pistol) that uses straight blowback for operation. This version has a removable barrel and uses a sealed hydraulic recoil buffer in place of a gas cylinder.[14] After swapping out the barrel and magazine it can use .380 ACP (9×17mm Short) or .32 ACP (7.65×17mm Browning SR) pistol cartridges and after replacing the slide, magazine and barrel (with floating chamber insert)—it can also be used to fire .22 LR (5.6mm Long Rifle) ammunition.[14] The hydraulic recoil buffer of the P7K3 is prone to wear and causes a serious problem to operate the gun when it is worn down. Heckler & Koch does not make a replacement part for the buffer. However, there are some commercial buffers available. When the .22 LR slide and barrel are installed, the buffer is not engaged. The slide of the .22 LR has an opening at the front that allows the buffer to be unused when firing the gun. Heckler & Koch provides a special scraper tool for the .22 LR-barrel. The tool is needed to clean the inside of the floating chamber for save operation. An additional exchange tool is provided for all calibers to screw and unscrew the barrel nut that attaches the barrel to the frame. Both tools can be seen in one of the pictures of the P7K3 on this page. P7K3's are more rare in the U.S. than in Europe and are valued at higher prices especially when they are in good condition.
The P7M10 was introduced to the American market in 1991.[1] It is chambered for the .40 S&W (10×22mm Smith & Wesson) round and has a double-stack 10-round magazine.[15] With the American market in mind, a variant known as the P7M7 designed to use the .45 ACP (11.43×23mm Automatic Colt Pistol) cartridge was also created. However, it remained only a prototype due to excessive costs and complexity of creating such a weapon.[16]
Users
- Bangladesh: Special Security Force.[17]
- Democratic Republic of Congo: P7M13 variant.[18]
- France:[19]
- Germany: Used by the military police (Feldjäger).[20] Was also used by the Federal Police (Bundespolizei) and several other police departments.[16] The P7 PSP is also in use with the Bavarian state police.[21]
- Greece: P7M8 variant.[16] produced under license by Hellenic Arms Industry as the EP7 for the Hellenic Airforce and police services.[22] also made under license by the Hellenic Arms Industry.[23]
- Iceland:Used by the Viking Squad.[24]
- South Korea: P7M13 variant. Used by the Korean National Police SWAT.[25]
- Lebanon:[19]
- Luxembourg: P7M13 variant is used by the Unité Spéciale de la Police intervention unit of the Grand Ducal Police.[26][27]
- Malaysia:[19]
- Mexico: Locally manufactured version with frame-mounted safety lever placed on the right side of the frame as required by the Mexican government, known as the P7M13S, created under license in 1983 by the Departamento de la Industria Militar (Military Industry Department) of the Dirección General de Fábricas de la Defensa.[2][28][29]
- Norway: P7M8 variant.[18]
- Pakistan: Used by Special Services Group.[30]
- Portugal:[19]
- Saudi Arabia: P7 M13 9mm.
- Singapore: P7M8 variant.[18]
- United Arab Emirates: P7M13 variant.[18]
- United States: Used by several police departments, including the New Jersey State Police (P7M8), as well as the United States Park Police [31]
- Uruguay: P7M8 variant.[18]
See also
- Arsenal P-M02—another pistol using the Barnitzke system
- Steyr GB—another pistol using the Barnitzke system
Notes
- ^ a b c d e f Woźniak, Ryszard: Encyklopedia najnowszej broni palnej—tom 2 G-Ł, page 112. Bellona, 2001.
- ^ a b "World Infantry Weapons: Mexico". Retrieved 2009-05-22.
- ^ Hogg, Ian V.; John Walter (2004). Pistols of the World (4th ed.). Iola, Wis.: Krause Publications. p. 45. ISBN 0-87349-460-1. OCLC 56714520.
- ^ Popenker, Max R. (June 29, 2010). "Gustloff Volkssturmgewehr VG.1-5 rifle (Germany)". Modern Firearms. Retrieved July 29, 2010.
- ^ "Official HK P7 Manual" (PDF). p. 4. Retrieved 2009-05-23.
- ^ "The Heckler & Koch P7 Pistol Family -- Introduction". Retrieved 2009-05-23.
- ^ "Unofficial HK P7 FAQ". Retrieved 2009-05-23.
- ^ "Helmut Welde's HK P7 patent". Retrieved 2009-05-02.
- ^ "Official HK P7 Manual" (PDF). p. 5. Retrieved 2009-05-23.
- ^ "Heckler & Koch PSP and P7". Retrieved 2009-05-23.
- ^ a b "Heckler & Koch P7PT8". Retrieved 2009-05-23.
- ^ P7 serial number
- ^ a b "Heckler & Koch P7M13". Retrieved 2009-05-23.
- ^ a b "Heckler & Koch P7K3". Retrieved 2009-05-23.
- ^ "Heckler & Koch P7M10". Retrieved 2009-05-23.
- ^ a b c "Modern Firearms' Heckler - Koch PSP P7 P7M8 P7M13 P7M10 pistols (Germany)". Retrieved 2009-05-22.
- ^ http://www.bdmilitary.com/index.php?option=com_content&view=article&id=102&Itemid=95
- ^ a b c d e Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). ISBN 978-0-7106-2869-5.
- ^ a b c d http://weaponsystems.net/weapon.php?weapon=AA01%20-%20P7
- ^ "streitkraeftebasis.de: Pistole P7" (in German). Retrieved 2009-11-09.
- ^ (in German). p. 2 http://www.landtag-niedersachsen.de/Drucksachen/Drucksachen_16_2500/1501-2000/16-1609.pdf. Retrieved 2017-05-17.
{{cite web}}
: Missing or empty|title=
(help) - ^ "EBO 9 mm EP7 pistol (Greece), PISTOLS". Jane's Information Group. 2001-04-25. Retrieved 2009-05-22. [dead link ]
- ^ "Elliniki Viomichania Oplon USP pistol brochure" (PDF). Elliniki Viomichania Oplon. Retrieved 2009-05-22.
- ^ "Starfssamningur við tólf lögregluþjóna". Retrieved 2014-08-18.
- ^ >"SWAT Round-Up International 2006: Team Insights". Hendon Publishing Company. January 2007. Retrieved 2010-09-13.
- ^ "Unofficial Pistols Page, Equipment". http://USP.lu - Unofficial Website of Unité Spéciale, Officially Endorsed. Archived from the original on 2011-07-22. Retrieved 2009-10-06.
{{cite web}}
: External link in
(help); Unknown parameter|publisher=
|deadurl=
ignored (|url-status=
suggested) (help) - ^ "L'Unite d'Intervention de la Police Luxembourgeoise" (PDF) (in French). RAIDS Magazine. March 2006. Archived from the original (PDF) on 2011-07-22. Retrieved 2009-09-23.
{{cite web}}
: Unknown parameter|deadurl=
ignored (|url-status=
suggested) (help) - ^ Ezell, Eward. Small Arms Today (Stackpole, 1988)
- ^ Kersten, Manfred. "P7 für Mexiko". Waffenfreund (3/1992)
- ^ "Pakistan's SSG". specwarnet.net. Retrieved 7 May 2017.
- ^ http://www.gunfaqs.org/P7FAQ/VII/2.htm
Bibliography
- Woźniak, Ryszard (2001). Encyklopedia najnowszej broni palnej—tom 2 G-Ł (in Polish). Warsaw, Poland: Bellona. ISBN 83-11-09310-5.