Jump to content

RTLinux

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Zyxw (talk | contribs) at 13:30, 15 November 2016 (→External links: update archive links using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

RTLinux
Original author(s)Victor Yodaiken, Michael Barabanov
Developer(s)FSMLabs, Wind River Systems
Written inC
Operating systemLinux
Available inEnglish
TypeKernel
LicenseGPL2
Websitewww.rtlinux.org

RTLinux is a hard realtime RTOS microkernel that runs the entire Linux operating system as a fully preemptive process. The hard real-time property makes it possible to control robots, data acquisition systems, manufacturing plants, and other time-sensitive instruments and machines from RTLinux applications.

RTLinux was developed by Victor Yodaiken, Michael Barabanov, Cort Dougan and others at the New Mexico Institute of Mining and Technology and then as a commercial product at FSMLabs. Wind River Systems acquired FSMLabs embedded technology in February 2007 and made a version available as Wind River Real-Time Core for Wind River Linux. As of August 2011, Wind River has discontinued the Wind River Real-Time Core product line, effectively ending commercial support for the RTLinux product.

Background

The key RTLinux design objective was to add hard real-time capabilities to a commodity operating system to facilitate the development of complex control programs with both capabilities.[1][2] For example, one might want to develop a real-time motor controller that used a commodity database and exported a web operator interface. Instead of attempting to build a single operating system that could support real-time and non-real-time capabilities, RTLinux was designed to share a computing device between a real-time and non-real-time operating system so that (1) the real-time operating system could never be blocked from execution by the non-real-time operating system and (2) components running in the two different environments could easily share data. As the name implies RTLinux was originally designed to use Linux as the non-real-time system[3] but it eventually evolved so that the RTCore real-time kernel could run with either Linux or BSD UNIX.

Multi-Environment Real-Time (MERT) was the first example of a real-time operating system coexisting with a UNIX system. MERT relied on traditional virtualization techniques: the real-time kernel was the host operating system (or hypervisor) and Bell Systems UNIX was the guest. RTLinux was an attempt to update the MERT concept to the PC era and commodity hardware. It was also an attempt to also overcome the performance limits of MERT, particularly the overhead introduced by virtualization.

The technique used was to only virtualize the guest interrupt control. This method allowed the real-time kernel to convert the guest operating system into a system that was completely preemptible but that could still directly control, for example, storage devices. In particular, standard drivers for the guest worked without source modification although they needed to be recompiled to use the virtualization "hooks". See also paravirtualization. The UNIX "pipe" was adapted to permit real-time and non-real-time programs to communicate although other methods such as shared memory were also added.

From the programmer's point of view, RTLinux originally looked like a small threaded environment for real-time tasks plus the standard Linux environment for everything else. The real-time operating system was implemented as a loadable kernel module which began by virtualizing guest interrupt control and then started a real-time scheduler. Tasks were assigned static priorities and scheduling was originally purely priority driven. The guest operating system was incorporated as the lowest priority task and essentially acted as the idle task for the real-time system. Real-time tasks ran in kernel mode. Later development of RTLinux adopted the POSIX threads application programming interface (API) and then permitted creation of threads in user mode with real-time threads running inside guest processes. In multiprocessor environments threads were locked to processor cores and it was possible to prevent the guest thread from running on designated core (effectively reserving cores for only real-time processing).

Implementation

RTLinux provides the capability of running special real-time tasks and interrupt handlers on the same machine as standard Linux. These tasks and handlers execute when they need to execute no matter what Linux is doing. The worst case time between the moment a hardware interrupt is detected by the processor and the moment an interrupt handler starts to execute is under 15 microseconds on RTLinux running on a generic x86 (circa 2000). A RTLinux periodic task runs within 35 microseconds of its scheduled time on the same hardware. These times are hardware limited, and as hardware improves RTLinux will also improve. Standard Linux has excellent average performance and can even provide millisecond level scheduling precision for tasks using the POSIX soft real-time capabilities. Standard Linux is not, however, designed to provide sub-millisecond precision and reliable timing guarantees. RTLinux was based on a lightweight virtual machine where the Linux "guest" was given a virtualized interrupt controller and timer, and all other hardware access was direct. From the point of view of the real-time "host", the Linux kernel is a thread. Interrupts needed for deterministic processing are processed by the real-time core, while other interrupts are forwarded to Linux, which runs at a lower priority than real-time threads. Linux drivers handled almost all I/O. First-In-First-Out pipes (FIFOs) or shared memory can be used to share data between the operating system and RTLinux.

Objective

The key RTLinux design objective is that the system should be transparent, modular, and extensible. Transparency means that there are no unopenable black boxes and the cost of any operation should be determinable. Modularity means that it is possible to omit functionality and the expense of that functionality if it is not needed. And extensibility means that programmers should be able to add modules and tailor the system to their requirements. The base RTLinux system supports high speed interrupt handling and no more. It has simple priority scheduler that can be easily replaced by schedulers more suited to the needs of some specific application. When developing RTLinux, it was designed to maximize the advantage we get from having Linux and its powerful capabilities available.

Core components

RTLinux is structured as a small core component and a set of optional components. The core component permits installation of very low latency interrupt handlers that cannot be delayed or preempted by Linux itself and some low level synchronization and interrupt control routines. This core component has been extended to support SMP and at the same time it has been simplified by removing some functionality that can be provided outside the core.

Functionality

The majority of RTLinux functionality is in a collection of loadable kernel modules that provide optional services and levels of abstraction. These modules include:

  1. rtl sched - a priority scheduler that supports both a "lite POSIX" interface described below and the original V1 RTLinux API.
  2. rtl time - which controls the processor clocks and exports an abstract interface for connecting handlers to clocks.
  3. rtl posixio - supports POSIX style read/write/open interface to device drivers.
  4. rtl fifo - connects RT tasks and interrupt handlers to Linux processes through a device layer so that Linux processes can read/write to RT components.
  5. semaphore - a contributed package by Jerry Epplin which gives RT tasks blocking semaphores.
  6. POSIX mutex support is planned to be available in the next minor version update of RTLinux.
  7. mbuff is a contributed package written by Tomasz Motylewski for providing shared memory between RT components and Linux processes.

Realtime tasks

RTLinux realtime tasks get implemented as kernel modules similar to the type of module that Linux uses for drivers, file systems, and so on. Realtime tasks have direct access to the hardware and do not use virtual memory. On initialization, a realtime task (module) informs the RTLinux kernel of its deadline, period, and release-time constraints.

Threads

RT-Linux implements a POSIX API for a thread's manipulation. A thread is created by calling the pthread_create function. The third parameter of pthread_create is a function which contains the code executed by the thread.

It is necessary to set thread priorities in RTLinux. Threads with higher priorities can preempt threads with lower priorities. For example, we can have a thread controlling a stepper motor. In order to move the motor fluently, it is necessary to start this thread in strictly regular intervals. This can be guaranteed by assigning a high priority to this thread. The example threads2.c sets different thread priorities. Setting of thread priority is done by code shown below: 

int init_module(void)
{
pthread_attr_t attr;
struct sched_param param;
pthread_attr_init(&attr);
param.sched_priority = 1;
pthread_attr_setschedparam(&attr, &param);
pthread_create(&t1, &attr, &thread_code, "this is thread 1");
rtl_printf("Thread 1 started\n");
...
}

The output the program is as follows. 

Thread 1 started
Thread 2 started
Thread 3 started
Message: this is thread 1
Message: this is thread 2
Message: this is thread 2
Message: this is thread 2
Message: this is thread 1
Message: this is thread 1
Message: this is thread 3
Message: this is thread 3
Message: this is thread 3

The thread 2 has the highest priority and the thread 3 has the lowest priority. The first message is printed by the middle priority thread 1 because it is started a short time before the thread 2.

See also

References

  1. ^ "The RTLinux Manifesto", Victor Yodaiken, 5th Linux Conference Proceedings, 1999, [1]
  2. ^ "Cheap Operating systems Research", Victor Yodaiken. Published in the Proceedings of the First Conference on Freely Redistributable Systems, Cambridge MA, 1996 [2]
  3. ^ Barabanov, Michael (1996). "A Linux Based Real-Time Operating System"
Retrieved from "https://en.wikipedia.org/w/index.php?title=RTLinux&oldid=749642281"