Roller coaster inversion

An inversion on Black Mamba (2006) in Phantasialand of Brühl, Germany

A roller coaster inversion is an element of a roller coaster track that turns riders upside-down and then rights them. The degree to which it must invert riders is nebulous and a point of contention when it comes to elements like overbanked turns, which turn riders such that their heads are below their feet, but are not considered inversions. The inversions built in the early 1900s, were circular vertical loops that produced massive g-forces, causing stress on riders' necks. In 1975, designers from Arrow Dynamics developed the corkscrew, and the inversion was revived. Since then, elements have evolved from the simple vertical loop to massive Cobra rolls. With ten inversions, Colossus of Thorpe Park in Chertsey, England is the record holder for roller coaster with the most track inversions (Tenth Ring Roller Coaster of Chimelong Paradise in Guangzhou, China, also holds the record, but is merely a duplicate of Colossus).

History

Prototypes (1848–1903)

Loop-the-Loops (1903), at Coney Island, one of the first oval-looping coasters

The first inversion in roller coaster history was part of the Centrifugal Railway of Paris, France, built in 1848. It consisted of a 43-foot (13-meter) sloping track leading into a nearly circular vertical loop 13 feet (3.9 m) in diameter. During the early 1900s, many rides including vertical loops appeared around the world. These early loops had a major design flaw: the circular structure produced intense g-forces (hereafter "Gs"). The Flip-Flap Railway, built by an unknown contractor in 1898 on Coney Island of Brooklyn, United States, reached 12 Gs and snapped riders' necks. In 1903, the same person built Loop-the-Loops, another looping coaster, in the same park. This time the loops were slightly oval-shaped rather than circular, though not clothoid in shape like modern loops. Although the ride was safe, it had a low capacity, loading four people every five minutes (48 people per hour, compared to 1800 riders per hour on Corkscrew, an early modern coaster that opened in 1976), and was poorly received after the tragedies of the Flip-Flap Railway. As their novelty wore off and their dangerous reputation spread, compounded with the developing Great Depression, the early looping coasters faded and disappeared.

Corkscrew (1968–1976)

Corkscrews in the Magic Mountain coaster (1985) of Gardaland in Italy

It wasn't until the 1970s that the concept of inverting riders was revisited. In 1968, Karl Bacon of Arrow Dynamics created a prototype steel roller coaster with a corkscrew, the first of its kind. The prototyped proved that a tubular steel track, first pioneered by Arrow to create Disneyland's Matterhorn Bobsleds in 1959, could execute inversions both safely and reliably. The full model of the prototype, aptly named Corkscrew, was then installed in Knott's Berry Farm in Buena Park, United States, making history as the world's first modern inverting roller coaster (it was relocated to Silverwood Park of Idaho in 1990). In 1976, the previously disastrous vertical loop was successfully revived when Anton Schwarzkopf of Intamin constructed the Great American Revolution at Six Flags Magic Mountain of Valencia, United States, which became the world's first complete circuit looping roller coaster. Another roller coaster named Corkscrew, built in Cedar Point of Ohio in the same year, became the first with three inversions.

Innovations (1977–present)

Boomerang has been cloned over 50 times.

The next few years brought innovations that are still popular in modern coasters. The shuttle roller coaster (non-complete circuit) was invented by Schwarzkopf in 1977 and realized at Kings Island with the Screamin Demon coaster. These early incarnations used the weight-drop mechanism (as opposed to the later Flywheel methods) to launch the trains. Built in 1978, the Loch Ness Monster in Busch Gardens Williamsburg became the first coaster with interlocking loops. It is still the only coaster with this feature, as the only other coasters containing interlocking loops are now defunct: Lightnin' Loops, built by Arrow in Six Flags Great Adventure, was sold in 1992, and Orient Express of Worlds of Fun was demolished in 2003. The first Schwarzkopf shuttle loops with a flywheel launch also first appeared in 1978. Arrow's Irn Bru Revolution, Europe's first looping coaster, was built in 1979 at Pleasure Beach Blackpool of England. In 1980, Carolina Cyclone opened at Carowinds as the first roller coaster with four inversions. The Orient Express opened at Worlds of Fun of Kansas City, United States, in 1980, with the newly invented boomerang (also referred to as a batwing or Kamikaze Kurve), a single track element with two inversions.

In 1981, Vekoma invented the Boomerang coaster model, which became the most duplicated roller coaster ever. The first Boomerang was built at Reino Aventura (now Six Flags México) of Mexico City, Mexico in 1982. The Boomerang has had over 50 clones built worldwide from Doha, Qatar, to Tashkent, Uzbekistan. 1982 also brought the first five-inversion coaster, Arrow's Viper at Darien Lake in Darien, New York.

The record for number of inversions was broken quickly in the following years. Arrow's Vortex at Kings Island, built in 1987, was the first to have six. The next year, Shockwave at Six Flags Great America broke that record with seven inversions. In 1995, Dragon Khan in Spain's PortAventura became the first to have eight.

Son of Beast (2000) at Kings Island, the first wooden roller coaster to have an inversion

In 2000, Kings Island presented Son of Beast, the world's first wooden coaster with a vertical loop. Until then, all roller coasters with any inversions at all were steel. In December 2006, however, the loop was removed to make it possible to use lighter trains. This occurred after structural problems caused an incident in July 2006 that injured several riders.

In 2001, X, designed by Arrow, opened in Six Flags Magic Mountain. It is marketed as the world's first Fourth dimension roller coaster, capable of rotating riders upside-down independently of any track elements. This adds difficulty in delineating the number of inversions such rides have. As the riders physically rotate 360 degrees forward and backwards, proponents insist the number of inversions should not include only track elements. According to Guinness World Records, the roller coaster with the most inversions counted this way is Eejanaika (Japanese: ええじゃないか, Ain't it great?), essentially a clone of X, in Fuji-Q Highland of Fujiyoshida, Japan, which rotates riders 14 times. Counting only track elements, however, Colossus of Thorpe Park in Chertsey, England, built in 2002, holds the record as the first with ten inversions.

See also

• Roller coaster elements - includes a list of inversions

External links

• Element Cross Reference at Roller Coaster Database