Jump to content

6029

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 101.182.22.115 (talk) at 11:38, 27 September 2016 (Gallery). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

6029
6029 crossing the Murrumbidgee River Railway Bridge, Wagga Wagga in June 2015
Type and origin
Power typeSteam
BuilderBeyer, Peacock and Company, Manchester
Serial number7531
Build date1954
Specifications
Configuration:
 • Whyte4-8-4+4-8-4
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 7 in (1.397 m)
Adhesive weight282,000 lb (128 t) or 317,000 lb (144 t)
Loco weight562,000 lb (255 t) or 582,000 lb (264 t)
Fuel typeCoal
Fuel capacity14 long tons (14 t), later 18 long tons (18 t)
Firebox:
 • Grate area65 sq ft (6.0 m2)
Boiler pressure200 psi (1.38 MPa)
Heating surface3,030 sq ft (281 m2)
Superheater:
 • Heating area750 sq ft (70 m2)
CylindersFour
Cylinder size19+14 in × 26 in (489 mm × 660 mm) or 19+78 in × 26 in (505 mm × 660 mm)
Valve gearWalschaerts
Performance figures
Tractive effort59,560 lbf (264.9 kN)
Factor of adh.4.73 or 4.99
Career
OperatorsNew South Wales Government Railways
ClassAD60
Numbers6029
First run24 April 1954
WithdrawnSeptember 1972
Current ownerCanberra Railway Museum
DispositionOperational
Distance travelled 996,827 km

6029 is a four-cylinder, simple, non-condensing, superheated, articulated 4-8-4+4-8-4 steam engine, of the AD60 class, built by Beyer, Peacock and Company, Manchester, England, for the New South Wales Government Railways. It was restored to operational condition in 2014.

Service

6029 entered service in 1954 on the Main North line also working one the Main South and later Main Western line. On 17 February 1959 the locomotive was converted to dual control.[1]

It was withdrawn in September 1972 and condemned on 4 January 1973. In 1974 the National Museum of Australia in Canberra acquired the locomotive and placed it in the custody of the Australian Railway Historical Society ACT Division. It was restored to operational condition and operated heritage trains for the Canberra Railway Museum. 6029 is the only locomotive of its class to operate interstate, when in 1980 it visited Victoria participating in a parallel run to Wangaratta with Victorian Railways K153. Heritage tours continued over several years until boiler problems caused it to be withdrawn from service in 1981.[1]

In 1994 a feasibility study confirmed the requirements to get 6029 back in steam. A replacement ex-NSWGR boiler was obtained from a Victorian sawmill. Restoration commenced in 2007, being completed in July 2014 and after mainline trials, 6029 received official mainline accreditation in December 2014 with the first public trips taking place on 28 February 2015.[1][2][3][4]

It was named City of Canberra by minister Shane Rattenbury on 23 February 2015.[1][5]

References

  1. ^ a b c d 6029 Australian Steam
  2. ^ Massive restored steam train completes first test run in Canberra ABC News 25 July 2014
  3. ^ Project 6029 Project 6029 blog
  4. ^ Beyer-Garratt 6029 Inaugural Trip Canberra Railway Museum
  5. ^ Whitford, Richard(Ed) (2015), Federal City Express, Canberra: ARHS(ACT div), p. 1

Media related to AD6029 at Wikimedia Commons