Jump to content

South African Class 10E2

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 12:10, 20 January 2021 (Task 18 (cosmetic): eval 1 template: hyphenate params (3×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

South African Class 10E2
No. 10-103 at Beaconsfield, 18 September 2009
Type and origin
Power typeElectric
DesignerToshiba
BuilderUnion Carriage & Wagon
ModelToshiba 10E2
Build date1989
Total produced25
Specifications
Configuration:
 • AARC-C
 • UICCo'Co'
 • CommonwealthCo-Co
Gauge3 ft 6 in (1,067 mm) Cape gauge
Wheel diameter1,220 mm (48.03 in)
Wheelbase13,460 mm (44 ft 1+78 in) ​
 • Bogie4,060 mm (13 ft 3+78 in)
Pivot centres10,200 mm (33 ft 5+58 in)
Panto shoes12,000 mm (39 ft 4+12 in)
Length:
 • Over couplers18,520 mm (60 ft 9+18 in)
 • Over body17,506 mm (57 ft 5+14 in)
Height:
 • Pantograph4,120 mm (13 ft 6+14 in)
 • Body height3,945 mm (12 ft 11+38 in)
Axle load21,210 kg (46,760 lb)
Adhesive weight125,000 kg (276,000 lb)
Loco weight125,000 kg (276,000 lb)
Electric system/s3 kV DC catenary
Current pickup(s)Pantographs
Traction motorsSix SE-218 ​
 • Rating 1 hour540 kW (720 hp)
 • Continuous515 kW (691 hp)
Gear ratio19:92
Loco brakeAir, Regenerative & Rheostatic
Train brakesAir & Vacuum
CouplersAAR knuckle
Performance figures
Maximum speed90 km/h (56 mph)
Power output:
 • 1 hour3,240 kW (4,340 hp)
 • Continuous3,090 kW (4,140 hp)
Tractive effort:
 • Starting450 kN (100,000 lbf)
 • 1 hour335 kN (75,000 lbf)
 • Continuous310 kN (70,000 lbf) @ 35 km/h (22 mph)
Career
OperatorsSouth African Railways
Spoornet
Transnet Freight Rail
ClassClass 10E2
Number in class25
Numbers10-101 to 10-125
NicknamesBreadbin
Delivered1989-1990
First run1989

The South African Railways Class 10E2 of 1989 is an electric locomotive.

In 1989 and 1990, the South African Railways placed twenty-five Class 10E2 electric locomotives with a Co-Co wheel arrangement in mainline service.[1][2]

Manufacturer

The 3 kV DC Class 10E2 electric locomotive was designed for the South African Railways (SAR) by Toshiba and built by Union Carriage and Wagon (UCW) in Nigel, Transvaal. Toshiba of Japan supplied the electrical equipment while UCW was responsible for the mechanical components and assembly.[3]

UCW delivered twenty-five locomotives to the SAR in 1989 and 1990, numbered in the range from 10-101 to 10-125. The company did not allocate builder’s numbers to the locomotives it built for the SAR, but used the SAR unit numbers for their record keeping.[1]

Characteristics

The Class 10E2 was introduced as a standard 3 kV DC heavy goods locomotive. With a continuous power rating of 3,090 kilowatts (4,140 horsepower), four Class 10E2 locomotives are capable of performing the same work as six Class 6E1.[4]

Brakes

The locomotive makes use of either regenerative or rheostatic braking, as the situation demands. Both traction and electric braking power are continuously variable, with the electric braking optimised to such an extent that maximum use will be made of the regenerative braking capacity of the 3 kV DC network, with the ability to automatically change over to rheostatic braking whenever the overhead supply system becomes non-receptive.[4]

The entire fleet of the Class 10E family of electric locomotives is equipped with electronic chopper control, which is smoother in comparison to the rheostatic resistance control which was used in the Classes 1E to 6E1 electric locomotives.[5]

Bogies

The Class 10E2 was built with sophisticated traction linkages on the bogies. Together with the locomotive's electronic wheel-slip detection system, these traction struts, mounted between the linkages on the bogies and the locomotive body and colloquially referred to as grasshopper legs, ensure the maximum transfer of power to the rails without causing wheel-slip by reducing the adhesion of the leading bogie and increasing that of the trailing bogie by as much as 15% upon starting.[4]

Orientation

These dual cab locomotives have a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end is marked as the no. 2 end.[2]

Identifying features

In visual appearance, the Class 10E2 can be distinguished from the Class 10E by the roof ends and the sills. The Class 10E has riffled roof ends and parts of the sill protrude slightly past the bottom edge of the body sides. The Class 10E2 has smooth unriffled roof ends and no part of the sill protrudes past the bottom edge of the body sides.[2]

Service

The Class 10E2 is mainly employed to haul ore trains on the line between Kimberley and Hotazel in the Northern Cape. It also works between Kimberley and the Witwatersrand. Most were initially shedded at Kaserne near Johannesburg with several also at Beaconsfield near Kimberley.[1]

In 1998, a number of Spoornet's electric locomotives and most of their Class 38-000 electro-diesel locomotives were sold to Maquarie-GETX (General Electric Financing) and leased back to Spoornet for a ten-year period which was to expire in 2008. Of the Class 10E2, numbers 10-106 to 10-125 were later also included in this leasing deal.[1]

Liveries

All the Class 10E2 locomotives were delivered in the SAR red oxide livery with signal red buffer beams and cowcatchers and a yellow V stripe on the ends, folded over to a horizontal stripe below the side windows. The number plates on the sides were mounted without the traditional three-stripe yellow wings. In the late 1990s many were repainted in the Spoornet blue livery with outline numbers on the long hood sides. After 2008 in the Transnet Freight Rail (TFR) era, several received the TFR red, green and yellow livery.[6]

On Class 10E2 units which were repainted in Transnet Freight Rail livery from c. 2011, the locomotive numbers are displayed as, for example, either "E10110" or "E10 125", instead of the earlier "10-110".

Illustration

References

  1. ^ a b c d Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 49–52, 60.
  2. ^ a b c South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  3. ^ "UCW - Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
  4. ^ a b c Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 132–133. ISBN 0869772112.
  5. ^ Jane's Train Recognition Guide
  6. ^ Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 9. South-Eastwards as far as Volksrust (2nd part) by Les Pivnic. Caption 4. (Accessed on 11 April 2017)