Lithium molybdate

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 05:55, 15 September 2020 (Alter: url. Add: author pars. 1-1. Removed parameters. Some additions/deletions were actually parameter name changes. | You can use this bot yourself. Report bugs here. | Suggested by Abductive | Category:Chembox having DSD data | via #UCB_Category). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lithium molybdate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.033.601 Edit this at Wikidata
  • InChI=1S/2Li.Mo.4O/q2*+1;;;;2*-1 checkY
    Key: NMHMDUCCVHOJQI-UHFFFAOYSA-N checkY
  • InChI=1/2Li.Mo.4O/q2*+1;;;;2*-1/r2Li.MoO4/c;;2-1(3,4)5/q2*+1;-2
    Key: NMHMDUCCVHOJQI-FFXFYZCHAF
  • [Li+].[Li+].[O-][Mo]([O-])(=O)=O
Properties
Li2MoO4
Molar mass 173.82 g/mol
Appearance white odorless powder
hygroscopic or transparent crystal
Density 3.07 g/cm3 (pure crystal), 2.66 g/cm3 (hydrated crystal)
Melting point 705 °C (1,301 °F; 978 K)
very soluble
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
0
1
Related compounds
Other cations
 sodium molybdate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Lithium molybdate (Li2MoO4) is a chemical compound. It is mainly used as an inhibitor in some types of industrial air conditioning.

Uses

Lithium molybdate is used as corrosion inhibitor in LiBr (Lithium bromide) absorption chiller for industrial central air conditioning. It is manufactured and shipped as either a colorless, transparent fluid or a white crystal powder. In either state it not classified as a hazardous material.

Li2MoO4 crystals have been found applicable for cryogenic phonon-scintillation detectors, which are used to investigate some rare nuclear processes.[1] The use of Li2MoO4 ceramics for antennas has been studied due to their low loss dielectric properties and the possibility to fabricate them by a room-temperature densification method instead of conventional sintering.[2]

References

  1. ^ Barinova, O. P.; Danevich, F. A.; Degoda, V. Ya.; Kirsanova, S. V.; Kudovbenko, V. M.; Pirro, S.; Tretyak, V. I. (2010-01-21). "First test of Li2MoO4 crystal as a cryogenic scintillating bolometer". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 613 (1): 54–57. doi:10.1016/j.nima.2009.11.059.
  2. ^ Kähäri, Hanna; Ramachandran, Prasadh; Juuti, Jari; Jantunen, Heli (2017). "Room-Temperature Densified Li2MoO4 Ceramic Patch Antenna and the Effect of Humidity". International Journal of Applied Ceramic Technology. 14: 50–55. doi:10.1111/ijac.12615. ISSN 1744-7402.
Stub icon

This inorganic compound–related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Lithium_molybdate&oldid=978484524"