Jump to content

British Rail 11001

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 2603:7081:4001:7200:58d3:5501:b945:3c15 (talk) at 03:41, 21 December 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

British Rail 11001
11001
Type and origin
Power typeDiesel-mechanical
BuilderBritish RailwaysAshford Works
Order number3410
Build date1 February 1949
Total produced1
Specifications
Configuration:
 • Whyte0-6-0 dm
 • UICC
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter4 ft 6 in (1.372 m)
Length33 ft 3 in (10.13 m)
Loco weight49.45 long tons (50.24 t; 55.38 short tons)
Prime moverPaxman RPH Series 1
TransmissionMechanical, SSS Powerflow 3-speed gearbox
Train heatingNone
Performance figures
Maximum speed45 mph (72 km/h)
Power outputEngine: 500 bhp (373 kW)
Tractive effort33,500 lbf (149.0 kN)
Career
OperatorsBritish Railways
Numbers11001
Axle load classRoute availability
Retired8 August 1959
DispositionScrapped at Ashford Works on 31 December 1959

11001 was one of the first British Railways diesel locomotives, built in 1949 at British Railways' Ashford Works. It was designed by O. V. S. Bulleid when he was Chief Mechanical Engineer of the Southern Railway. It was powered by a Paxman RPH Series 1 engine, capable of delivering 500 brake horsepower (370 kW) at 1,250 rpm. It was driven via a Vulcan-Sinclair fluid coupling to an SSS (synchro-self-shifting) Powerflow gearbox. The gearbox provided three forward and reverse gears in either high or low range, with top speed ranging from 5 mph (8 km/h) in 1st gear, low range up to 36 mph (58 km/h). It had a 0-6-0 wheel formation, driven by rods from a rear jackshaft on the final drive, and with Bulleid's favoured BFB wheels.

Its main duties were on branch lines and shunting, working dwindling goods services on the Caterham line during the 1950s.[1] It was allocated to Norwood Shed, but also had been photographed in Swindon.

It was withdrawn in August 1959 and cut up at Ashford Works in December.

Oddly, the locomotive's controls were laid out as in a steam locomotive, perhaps because there were at that time few drivers with experience of driving diesel engines. There are no known photographs of the interior.

In fiction

Dennis and Norman, from Thomas & Friends, are based on the locomotive.

References

  1. ^ Spence 1986, p. 115.
  • Spence, Jeoffry (1986). The Caterham Railway. The Oakwood Press. ISBN 978-0-85361-325-1. Archived from the original on 17 July 2011. Retrieved 24 April 2007. {{cite book}}: Invalid |ref=harv (help)