Japanese sword mountings
Japanese sword mountings are the various housings and associated fittings (tosogu) that hold the blade of a Japanese sword when it is being worn or stored. Koshirae (拵え) refers to the ornate mountings of a Japanese sword (e.g. katana) used when the sword blade is being worn by its owner, whereas the shirasaya is a plain undecorated wooden mounting composed of a saya and tsuka that the sword blade is stored in when not being used.
- 1 Components
- 2 Shirasaya
- 3 Koshirae
- 4 See also
- 5 Notes
- 6 References
- 7 Further reading
- 8 External links
- Fuchi (縁):The fuchi is a hilt collar between the tsuka and the tsuba.
- Habaki (鎺):The habaki is a wedge shaped metal collar used to keep the sword from falling out of the saya and to support the fittings below; fitted at the ha-machi and mune-machi which precede the nakago.
- Kaeshizuno (返し角) - a hook shaped fitting used to lock the saya to the obi while drawing.
- Kashira (頭):The kashira is a butt cap (or pommel) on the end of the tsuka.
- Kōgai (笄):The kōgai is a spike for hair arranging carried sometimes as part of Katana-Koshirae in another pocket.
- Koiguchi (鯉口):The koiguchi is the mouth of the saya or its fitting; traditionally made of buffalo horn.
- Kojiri (鐺):The kojiri is the end of the saya or the protective fitting at the end of the saya; also traditionally made of buffalo horn.
- Kozuka (小柄):The kozuka is a decorative handle fitting for the kogatana; a small utility knife fit into a pocket on the saya.
- Kurigata (栗形):The kuri-kata is a knob on the side of the saya for attaching the sageo.
- Mekugi (目釘):The mekugi is a small peg for securing the tsuka to the nakago.
- Menuki (目貫):The menuki are ornaments on the tsuka (generally under the tsuka-ito); to fit into the palm for grip and originally meant to hide the mekugi.
- Mekugi-ana (目釘穴):The mekugi-ana are the holes in the tsuka and nakago for the mekugi.
- Sageo (下げ緒):The sageo is the cord used to tie saya to the belt/obi when worn.
- Same-hada (鮫肌) - literally the pattern of the ray skin.
- Same-kawa (samegawa) (鮫皮):same-kawa is the ray or shark skin wrapping of the tsuka (handle/hilt).
- Saya (鞘):The saya is a wooden scabbard for the blade; traditionally done in lacquered wood.
- Seppa (切羽):The seppa are washers above and below the tsuba to tighten the fittings.
- Shitodome (鵐目) - an accent on the kurikata for aesthetic purposes; often done in gold-ish metal in modern reproductions.
- Tsuba (鍔 or 鐔):The tsuba is a hand guard.
- Tsuka (柄):The tsuka is the hilt or handle; made of wood and wrapped in samegawa.
- Tsuka-maki (柄巻) - the art of wrapping the tsuka, including the most common hineri maki and katate maki (battle wrap).
- Tsuka-ito (柄糸):Tsuka-ito the wrap of the tsuka, traditionally silk but today most often in cotton and sometimes leather.
- Wari-bashi (割箸) - metal chop-sticks fit in a pocket on the saya.
A shirasaya (白鞘), "white scabbard", is a plain wooden Japanese blade mount consisting of a saya (scabbard) and tsuka (hilt), traditionally made of nurizaya wood and used when a blade was not expected to see use for some time and needed to be stored. They were externally featureless save for the needed mekugi-ana to secure the nakago (tang), though sometimes sayagaki (blade information) was also present. The need for specialized storage is because prolonged koshirae mounting harmed the blade, owing to factors such as the lacquered wood retaining moisture and encouraging corrosion.
Such mountings are not intended for actual combat, as the lack of a tsuba (guard) and proper handle wrappings were deleterious; as such they would likely never make their way onto a battlefield. However, there have been loosely similar "hidden" mountings, such as the shikomizue. Also, many blades dating back to earlier Japanese history are today sold in such a format, along with modern-day reproductions; while most are purely decorative replicas, a few have functional blades.
The word koshirae is derived from the verb koshiraeru (拵える), which is no longer used in current speech. More commonly "tsukuru" is used in its place with both words meaning to "make, create, manufacture." A more accurate word is tōsō (刀装), meaning sword-furniture, where tōsōgu (刀装具) are the parts of the mounting in general, and "kanagu" stands for those made of metal. Gaisō (外装) are the "outer" mountings, as opposed to tōshin (刀身), the "body" of the sword.
A koshirae should be presented with the tsuka (hilt) to the left, particularly in times of peace with the reason being that you cannot unsheathe the sword easily this way. During the Edo period, many formalized rules were put into place: in times of war the hilt should be presented to the right allowing the sword to be readily unsheathed.
Types of koshirae
The tachi style koshirae is the primary style of mounting used for the tachi, where the sword is suspended edge-down from two hangers (ashi) attached to the obi. The hilt often had a slightly stronger curvature than the blade, continuing the classic tachi increase in curvature going from the tip to the hilt. The hilt was usually secured with two pegs (mekugi), as compared to one peg for shorter blades including uchigatana and katana. The tachi style koshirae preceded the uchigatana (katana) style koshirae.
The uchigatana style koshirae is the most commonly known koshirae and it is what is most associated with a samurai sword. Swords mounted in this manner are worn with the cutting edge up as opposed to the tachi mounting, in which the sword is worn with the cutting edge down.
Han-dachi (half tachi)
The han-dachi koshirae was worn katana-style but included some tachi related fittings such as a kabuto-gane instead of a kashira.
The aikuchi (合口) ("meeting mouth/opening") is a form of mounting for small Japanese swords (nihontō) (日本刀) in which the tsuka and the saya meet without a tsuba between them. Originally used on the koshigatana (a precursor to the wakizashi) to facilitate close wearing with armour, it became a fashionable upper-class mounting style for a tantō (literally, "small sword", nowadays regarded as a dagger) from the Kamakura period onwards.
According to S. Alexander Takeuchi from University of North Alabama, Department of Sociology, aikuchi is a form of koshirae (mounting style) which commonly was used in tantō creation. The nomenclature of the word "aikuchi" is the following: the Japanese: ai is a gerund which means meeting and Japanese: kuchi is a noun that means mouth. The same formula is used in koi-guchi. So, aikuchi initially was a style of mounting in which the fuchi meets the koi-guchi.
The name shikomi-zue is actually the name of a type of mounting; the sword blade was placed in a cane-like mounting (tsue) as concealment. These mountings are not to be confused with the Shirasaya (白鞘, "white scabbard"), which were just plain wooden mountings with no decoration other than (sometimes) a short description of the contents.
The kaiken is a small 8-10 inch long, single or double bladed dagger without ornamental fittings housed in a plain mount, formerly carried by men and women of the samurai class in Japan. It was useful for self-defense indoors where the long katana and intermediate wakizashi were inconvenient. Women carried them in their kimono either in a pocket like fold or in the sleeve  for self-defense or for suicide by means of slashing the jugular veins and carotid artery in the left side of the neck.
Tantō mounted in aikuchi style koshirae.
Parts of the koshirae
Saya (鞘) is the Japanese term for a scabbard, and specifically refers to the scabbard for a sword or knife. The saya of a koshirae are normally manufactured from very lightweight wood, with a coat of lacquer on the exterior. The wood is light enough that great care must be taken when drawing the sword; incorrect form may result in the blade of the sword slicing through the saya and severing one or more fingers. Correct drawing and sheathing of the blade involves contacting the mune rather than ha to the inside of the scabbard. The saya also has a horn knob (栗形 kurigata) on one side for attaching a braided cord (sageo), and may have a shitodome to accent the kurigata as well as an end cap (小尻 kojiri) made from metal. Traditionally the koiguchi and kojiri were made from buffalo horn.
The Saya is divided in parts:
A sageo (下緒 or 下げ緒) is a hanging cord made of silk, cotton or leather that is passed through the hole in the kurigata (栗形) of a Japanese sword's saya. There are a number of different methods for wrapping and tying the sageo on the saya for display purposes. Other uses for the sageo are tying the sword to the samurai and hojojutsu. The samurai felt the sageo formed a spiritual bond between them and the sword, and they were very particular about tying it correctly when the sword was not in use.
The kurikata is a knob that is attached to the scabbard of a Japanese sword. The sageo (cord) that secures the saya of the sword to the obi (belt) goes through a hole in the kurikata.
The kojiri is the end cap of the scabbard or the protective fitting at the end of the scabbard.
- Kogatana and kozuka
Kogatana, a small utility knife that fits into a pocket on the scabbard, the kozuka is the decorative handle for the kogatana.
The kōgai is a spike for hair arranging that fits into a pocket on the saya.
The umabari is a small knife that is a variation of the kogatana, it fits into a pocket on the saya.
The tsuka is the hilt or handle of a Japanese sword.
The tsuka is divided in the following parts:
The menuki are ornaments on the tsuka (generally under the tsuka-ito); to fit into the palm for grip.
Samegawa is the ray skin used to cover or wrap the handle.
Tsuka-ito is the wrapping of the tsuka, traditionally silk but today more often cotton and sometimes, leather.
Fuchi, a cap type collar or ferrule which covers the opening in the tsuka of a Japanese sword. The tang of the sword goes into the tsuka through the opening in the fuchi.
The kashira is the end cap (pommel) on the tsuka.
The tsuba (鍔, or 鐔) is usually a round (or occasionally squareish) guard at the end of the grip of bladed Japanese weapons, like the katana and its various variations, tachi, wakizashi, tantō, naginata etc. They contribute to the balance of the weapon and to the protection of the hand. The tsuba was mostly meant to be used to prevent the hand from sliding onto the blade during thrusts as opposed to protecting from an opponent's blade. The chudan no kamae guard is determined by the tsuba and the curvature of the blade. The diameter of the average katana tsuba is 7.5–8 centimetres (3.0–3.1 in), wakizashi tsuba is 6.2–6.6 cm (2.4–2.6 in), and tantō tsuba is 4.5–6 cm (1.8–2.4 in).
During the Muromachi period (1333–1573) and the Momoyama period (1573–1603) Tsuba were more for functionality than for decoration, being made of stronger metals and designs. During the Edo period (1603–1868) there was peace in Japan so tsuba became more ornamental and made of less practical metals such as gold.
Tsuba are usually finely decorated, and nowadays are collectors' items. Tsuba were made by whole dynasties of craftsmen whose only craft was making tsuba. They were usually lavishly decorated. In addition to being collectors items, they were often used as heirlooms, passed from one generation to the next. Japanese families with samurai roots sometimes have their family crest (mon) crafted onto a tsuba. Tsuba can be found in a variety of metals and alloys, including iron, steel, brass, copper and shakudō. In a duel, two participants may lock their katana together at the point of the tsuba and push, trying to gain a better position from which to strike the other down. This is known as tsubazeriai (鍔迫り合い), lit. pushing tsuba against each other. Tsubazeriai is a common sight in modern kendo.
In modern Japanese, tsubazeriai (鍔迫り合い) has also come to mean "to be in fierce competition."
Tsuba with a Monkey Teasing an Elephant with a Stick, The Walters Art Museum.
The seppa are washers used in front of and behind the tsuba to tighten the fittings, seppa can be ornate or plain.
The habaki (鎺) is a piece of metal encircling the base of the blade of a Japanese sword. It has the double purpose of locking the tsuba (guard) in place, and to maintain the weapon in its saya (scabbard).
The importance of the habaki is seen in drawing the katana from the scabbard. It is drawn by grasping the scabbard near the top and pressing the guard with the thumb to emerge the blade just enough to unwedge the habaki from inside the scabbard in a process called koiguchi no kirikata (鯉口の切り方) "cutting the koiguchi". The blade, being freed, can be drawn out very quickly. This is known as koiguchi o kiru (鯉口を切る), nukitsuke (抜き付け), or tanka o kiru (啖呵を切る) "clearing the tanka". This is obviously an extremely aggressive gesture, since a fatal cut can be given in a fraction of a second thereafter (see iaidō). It is similar in connotation and effect as drawing back the hammer of a handgun, chambering a round on a pump-action shotgun, or pulling back and releasing the charging handle on other firearms.
The expression "tanka o kiru" is now widely used in Japan, in the sense of "getting ready to begin something", or "getting ready to speak", especially with an aggressive connotation.
The habaki will cause normal wear and tear inside the scabbard, and either a shim or a total replacement of the scabbard may be needed to remedy the issue as it will become too loose over time. Removing the habaki and oiling it after cutting or once every few months is recommended.
|Wikimedia Commons has media related to Tosogu (Japanese sword fittings).|
- List of National Treasures of Japan (crafts-swords)
- Tsuba in the Collection of Wolverhampton Art Gallery
- The New Generation of Japanese Swordsmiths, Authors Tamio Tsuchiko, Kenji Mishina, Publisher Kodansha International, 2002, P.191&P.191 ISBN 978-4-7700-2854-9
- In this context, "white" could be inferred as plain or undecorated.
- Holes in the hilt, meant for the mekugi (pegs) that secure the blade (See katana).
- Most manufacturers will note that such mountings are only meant for storage, display and transport purposes, not actual usage.
-  Art of the samurai: Japanese arms and armor, 1156-1868, Authors Morihiro Ogawa, Kazutoshi Harada, Publisher Metropolitan Museum of Art, 2009, ISBN 1-58839-345-3, ISBN 978-1-58839-345-6 P.193
-  The Japanese sword,Kanzan Satō, Kodansha International, May 30, 1983 P.196
-  The Japanese sword,Kanzan Satō, Kodansha International, May 30, 1983 P.196
-  Samurai: The Weapons and Spirit of the Japanese Warrior, Clive Sinclaire, Globe Pequot, Nov 1, 2004 P.88
- Seishinkai Bujutsu. "Concealed and Trick Weapons". Retrieved January 5, 2012.
-  A Glossary of the Construction, Decoration and Use of Arms and Armor: In All Countries and in All Times, Author George Cameron Stone, Publisher Courier Dover Publications, 1999, ISBN 0-486-40726-8, ISBN 978-0-486-40726-5 P.405
- Samurai: The Weapons and Spirit of the Japanese Warrior, Clive Sinclaire, Globe Pequot, Nov 1, 2004 P.88
- The complete encyclopedia of arms & weapons: the most comprehensive reference work ever published on arms and armor, Claude Blair, Publisher Bonanza Books, 1986, ISBN 0-517-48776-4, ISBN 978-0-517-48776-1 P.306
- The sword book in Honchō gunkikō and The book of Samé, Kō hi sei gi of Inaba Tsūriō, Authors Hakuseki Arai, Tsūryū Inaba, Publisher C. E. Tuttle, 1963 P.42
- "The Sageo and How to Wear Your Katana". Martial Arts Weapons and Training.
- C. U. Guido Schiller. "Koshirae: Nihon Token Gaiso The Mountings of Japanese Swords". Archived from the original on 2008-07-04. Retrieved 2008-06-17.
- The Craft of the Japanese Sword, Leon and Hiroko Kapp, Yoshindo Yoshihara ; Kodansha International; ISBN 0-87011-798-X
- The Samurai Sword: A Handbook, John M. Yumoto ; Charles E. Tuttle Company; ISBN 0-8048-0509-1
- The Japanese Sword, Kanzan Sato ; Kodansha International; ISBN 0-87011-562-6
- Japanese Swords, Nobuo Ogasawara ; Hoikusha Publishing Co, Ltd. ISBN 4-586-54022-2
- History of the Development of Koshirae
- Habaki - On Japanese Swords
- Martial Arts Weapons and Training - The Sageo and How to Wear Your Katana
- Nihonto Antiques - Step by step guide to tying a Sageo (photos).
- Usagiya Sword Shop - Step by step guide to tying a Sageo (photos).
- TakumiWarrior Sword Shop - Exploration of Japanese Tsuba Designs (photos).