Jump to content

British Rail Class D3/1

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Peter Horn (talk | contribs) at 14:59, 23 July 2015 ({{convert|36.00|LT|lk=on}} → {{convert|36.00|LT|t ST|lk=on}} etc). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

British Rail Class D3/1
Type and origin
Power typeDiesel-hydraulic
BuilderNorth British Locomotive Company
Serial number27751–27761, 27995–27997
Build date1958–1959
Total produced14
Specifications
Configuration:
 • Whyte0-4-0 DH
 • UICB
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter3 ft 9 in (1.143 m)
Loco weight36.00 long tons (36.58 t; 40.32 short tons)
Prime moverNBL/MAN W6V17.5/22AS (supercharged)
TransmissionHydraulic, Voith
MU workingNot fitted
Train heatingNone
Performance figures
Maximum speed20 mph (32 km/h)
Power outputEngine: 330 bhp (246 kW)
Tractive effort24,100 lbf (107.2 kN)
Career
OperatorsBritish Railways
ClassD3/1; later 3/4; no TOPS class
NumbersD2900–D2913
Axle load classRoute availability 5
RetiredFebruary 1967
DispositionAll scrapped

British Rail Class D3/1 was a locomotive commissioned by British Rail in England. It was a diesel powered locomotive in the pre-TOPS period built by the North British Locomotive Company. The NBL/MAN engines were built by the North British Locomotive Company in Scotland under licence from the German company MAN.

See also

Sources

  • Ian Allan ABC of British Railways Locomotives (Winter 1962/3 ed.). p. 203.