Jump to content

Century Mill, Farnworth

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 14:08, 18 November 2016 (Rescuing 3 sources and tagging 0 as dead. #IABot (v1.2.7.1)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Century
Century Mill, Farnworth is located in Greater Manchester
Century Mill, Farnworth
Location within Greater Manchester
Cotton
Spinning (ring mill)
LocationGeorge St, Dixon Green.
Further ownership
Coordinates53°32′43″N 2°24′40″W / 53.5454°N 2.4112°W / 53.5454; -2.4112
Power
Date1902
Engine makerHick Hargraves & Co. Ltd.
Engine typeCross compound
Valve GearCorliss
rpm59
Flywheel diameter27ft
No. of ropes45
Boiler configuration
Pressure190
Ring Frames pathcounts
References
[1] [2]

Century Mill, Farnworth is a former cotton spinning mill in Farnworth, in the Metropolitan Borough of Bolton, Greater Manchester which was built in the early 20th century for ring spinning. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The building is still in use for various other purposes in 2016.

History

Century mill was built early in the 20th century, spinning 40's counts on ring frames for general-purpose work.

The cotton industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–1918 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets and the independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry.[3] Century Mill, Farnworth was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950. In 2016 it was still standing and in use for non-textile purposes.

Architecture

Power

The mill had a 1500 hp cross compound engine by Hick, Hargreaves & Co. Ltd. built in 1902 which operated at 190psi. The cylinders were 26"HP, 54"LP on a 5 ft stroke. The 27 ft flywheel drove 45 ropes at 59rpm.[4]

Equipment

  • Ring frames

Owners

  • Lancashire Cotton Corporation (1930s–1964)
  • Courtaulds (1964–

See also

References

  1. ^ LCC 1951
  2. ^ "List of mills in Farnworth". Bolton Council. Retrieved 10 January 2009.
  3. ^ Dunkerley
  4. ^ Roberts 1921

Bibliography