Microwave: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
[[Image:EM spectrum.svg|thumb|490px|right|Electromagnetic spectrum with visible light highlighted]] |
[[Image:EM spectrum.svg|thumb|490px|right|Electromagnetic spectrum with visible light highlighted]] |
||
'''Microwaves''' are [[electromagnetic radiation|electromagnetic waves]] with [[wavelength]]s ranging from 1mm - 1m, or [[frequency|frequencies]] between 0.3 [[hertz|GHz]] and 300 GHz. |
Vinay Dadhich says'''Microwaves''' are [[electromagnetic radiation|electromagnetic waves]] with [[wavelength]]s ranging from 1mm - 1m, or [[frequency|frequencies]] between 0.3 [[hertz|GHz]] and 300 GHz. |
||
Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that [[Lumped element model|lumped-element circuit theory]] is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete [[resistor]]s, [[capacitor]]s, and [[inductor]]s used with lower frequency [[radio waves]]. Instead, distributed circuit elements and transmission-line theory are more useful methods for design and analysis. Open-wire and coaxial [[transmission line]]s give way to [[waveguide]]s, and lumped-element tuned circuits are replaced by cavity [[resonator]]s or resonant lines. Effects of [[reflection]], [[polarization]], [[scattering]], [[diffraction]] and atmospheric [[Absorption (electromagnetic radiation)|absorption]] usually associated with visible light are of practical significance in the study of microwave [[Radio propagation|propagation]]. The same [[Maxwell's equations|equations]] of electromagnetic theory apply at all frequencies. |
Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that [[Lumped element model|lumped-element circuit theory]] is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete [[resistor]]s, [[capacitor]]s, and [[inductor]]s used with lower frequency [[radio waves]]. Instead, distributed circuit elements and transmission-line theory are more useful methods for design and analysis. Open-wire and coaxial [[transmission line]]s give way to [[waveguide]]s, and lumped-element tuned circuits are replaced by cavity [[resonator]]s or resonant lines. Effects of [[reflection]], [[polarization]], [[scattering]], [[diffraction]] and atmospheric [[Absorption (electromagnetic radiation)|absorption]] usually associated with visible light are of practical significance in the study of microwave [[Radio propagation|propagation]]. The same [[Maxwell's equations|equations]] of electromagnetic theory apply at all frequencies. |
Revision as of 06:48, 28 May 2009
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f1/EM_spectrum.svg/490px-EM_spectrum.svg.png)
Vinay Dadhich saysMicrowaves are electromagnetic waves with wavelengths ranging from 1mm - 1m, or frequencies between 0.3 GHz and 300 GHz.
Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that lumped-element circuit theory is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete resistors, capacitors, and inductors used with lower frequency radio waves. Instead, distributed circuit elements and transmission-line theory are more useful methods for design and analysis. Open-wire and coaxial transmission lines give way to waveguides, and lumped-element tuned circuits are replaced by cavity resonators or resonant lines. Effects of reflection, polarization, scattering, diffraction and atmospheric absorption usually associated with visible light are of practical significance in the study of microwave propagation. The same equations of electromagnetic theory apply at all frequencies.
While the name may suggest a micrometer wavelength, it is better understood as indicating wavelengths very much smaller than those used in radio broadcasting. The boundaries between far infrared light, terahertz radiation, microwaves, and ultra-high-frequency radio waves are fairly arbitrary and are used variously between different fields of study. The term microwave generally refers to "alternating current signals with frequencies between 0.3 GHz (3×108 Hz) and 300 GHz (3×1011 Hz)."[1] Both IEC standard 60050 and IEEE standard 100 define "microwave" frequencies starting at 1 GHz (30 cm wavelength).
Electromagnetic waves longer (lower frequency) than microwaves are called "radio waves". Electromagnetic radiation with shorter wavelengths may be called "millimeter waves", terahertz radiation or even T-rays. Definitions differ for millimeter wave band, which the IEEE defines as 110 GHz to 300 GHz.
Frequency range
The microwave range includes ultra-high frequency (UHF) (0.3–3 GHz), super high frequency (SHF) (3–30 GHz), and extremely high frequency (EHF) (30–300 GHz) signals.
Above 300 GHz, the absorption of electromagnetic radiation by Earth's atmosphere is so great that it is effectively opaque, until the atmosphere becomes transparent again in the so-called infrared and optical window frequency ranges.
Microwave sources
Vacuum tube devices operate on the ballistic motion of electrons in a vacuum under the influence of controlling electric or magnetic fields, and include the magnetron, klystron, traveling-wave tube (TWT), and gyrotron. These devices work in the density modulated mode, rather than the current modulated mode. This means that they work on the basis of clumps of electrons flying ballistically through them, rather than using a continuous stream.
A maser is a device similar to a laser, except that it works at microwave frequencies.
Solid-state sources include the field-effect transistor (at least at lower frequencies), tunnel diodes, Gunn diodes, and IMPATT diodes.
Uses
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3f/Microwave_tower_silhouette.jpg/220px-Microwave_tower_silhouette.jpg)
Communication
- Before the advent of fiber optic transmission, most long distance telephone calls were carried via microwave point-to-point links through sites like the AT&T Long Lines. Starting in the early 1950s, frequency division multiplex was used to send up to 5,400 telephone channels on each microwave radio channel, with as many as ten radio channels combined into one antenna for the hop to the next site, up to 70 km away.
- Wireless LAN protocols, such as Bluetooth and the IEEE 802.11 specifications, also use microwaves in the 2.4 GHz ISM band, although 802.11a uses ISM band and U-NII frequencies in the 5 GHz range. Licensed long-range (up to about 25 km) Wireless Internet Access services have been used for almost a decade in many countries in the 3.5–4.0 GHz range. The FCC recently carved out spectrum for carriers that wish to offer services in this range in the U.S.-with emphasis on 3.65GHZ. Dozens of service providers across the country are securing or have already received licenses from the FCC to operate in this band. The WIMAX service offerings that can be carried on the 3.65GHZ band will give business customers another option for connectivity.
- Metropolitan Area Networks: MAN protocols, such as WiMAX (Worldwide Interoperability for Microwave Access) based in the IEEE 802.16 specification. The IEEE 802.16 specification was designed to operate between 2 to 11 GHz. The commercial implementations are in the 2.3GHz, 2.5 GHz, 3.5 GHz and 5.8 GHz ranges.
- Wide Area Mobile Broadband Wireless Access: MBWA protocols based on standards specifications such as IEEE 802.20 or ATIS/ANSI HC-SDMA (e.g. iBurst) are designed to operate between 1.6 and 2.3 GHz to give mobility and in-building penetration characteristics similar to mobile phones but with vastly greater spectral efficiency.
- Cable TV and Internet access on coaxial cable as well as broadcast television use some of the lower microwave frequencies. Some mobile phone networks, like GSM, also use the lower microwave frequencies.
- Microwave radio is used in broadcasting and telecommunication transmissions because, due to their short wavelength, highly directive antennas are smaller and therefore more practical than they would be at longer wavelengths (lower frequencies). There is also more bandwidth in the microwave spectrum than in the rest of the radio spectrum; the usable bandwidth below 300 MHz is less than 300 MHz while many GHz can be used above 300 MHz. Typically, microwaves are used in television news to transmit a signal from a remote location to a television station from a specially equipped van.
- Most satellite communications systems operate in the C, X, Ka, or Ku Bands of the microwave spectrum. These frequencies allow large bandwidth while avoiding the crowded UHF frequencies and staying below the atmospheric absorption of EHF frequencies. Satellite TV either operates in the C band for the traditional large dish Fixed Satellite Service or Ku band for Direct Broadcast Satellite. Military communications run primarily over X or Ku Band links, with Ka band being used for Milstar.
Remote sensing
- Radar uses microwave radiation to detect the range, speed, and other characteristics of remote objects. Development of radar was accelerated during World War II due to its great military utility. Now radar is widely used for applications such as air traffic control, navigation of ships, and speed limit enforcement.
- A Gunn diode oscillator and waveguide are used as a motion detector for automatic door openers (although these are being replaced by ultrasonic devices).
- Most radio astronomy uses microwaves.
- Microwave imaging; see Photoacoustic imaging in biomedicine
Navigation
- Global Navigation Satellite Systems (GNSS) including the Chinese Beidou, the American Global Positioning System (GPS) and the Russian GLONASS broadcast navigational signals in various bands between about 1.2 GHz and 1.6 GHz.
Power
- A microwave oven passes (non-ionizing) microwave radiation (at a frequency near 2.45 GHz) through food, causing dielectric heating by absorption of energy in the water, fats and sugar contained in the food. Microwave ovens became common kitchen appliances in Western countries in the late 1970s, following development of inexpensive cavity magnetrons.
- Microwave heating is used in industrial processes for drying and curing products.
- Many semiconductor processing techniques use microwaves to generate plasma for such purposes as reactive ion etching and plasma-enhanced chemical vapor deposition (PECVD).
- Microwaves can be used to transmit power over long distances, and post-World War II research was done to examine possibilities. NASA worked in the 1970s and early 1980s to research the possibilities of using Solar power satellite (SPS) systems with large solar arrays that would beam power down to the Earth's surface via microwaves.
- Less-than-lethal weaponry exists that uses millimeter waves to heat a thin layer of human skin to an intolerable temperature so as to make the targeted person move away. A two-second burst of the 95 GHz focused beam heats the skin to a temperature of 130 °F (54 °C) at a depth of 1/64th of an inch (0.4 mm). The United States Air Force and Marines are currently using this type of Active Denial System.[2]
Microwave frequency bands
The microwave spectrum is usually defined as electromagnetic energy ranging from approximately 1 GHz to 1000 GHz in frequency, but older usage includes lower frequencies. Most common applications are within the 1 to 40 GHz range. Microwave frequency bands, as defined by the Radio Society of Great Britain (RSGB), are shown in the table below:
Radio bands | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ITU | ||||||||||||
|
||||||||||||
EU / NATO / US ECM | ||||||||||||
IEEE | ||||||||||||
Other TV and radio | ||||||||||||
Letter Designation | Frequency range |
---|---|
L band | 1 to 2 GHz |
S band | 2 to 4 GHz |
C band | 4 to 8 GHz |
X band | 8 to 12 GHz |
Ku band | 12 to 18 GHz |
K band | 18 to 26.5 GHz |
Ka band | 26.5 to 40 GHz |
Q band | 30 to 50 GHz |
U band | 40 to 60 GHz |
V band | 50 to 75 GHz |
E band | 60 to 90 GHz |
W band | 75 to 110 GHz |
F band | 90 to 140 GHz |
D band | 110 to 170 GHz |
Footnote: P band is sometimes incorrectly used for Ku Band. "P" for "previous" was a radar band used in the UK ranging from 250 to 500 MHz and now obsolete per IEEE Std 521, see[1] and [2]. For other definitions see Letter Designations of Microwave Bands
Microwave frequency measurement
Microwave frequency can be measured by either electronic or mechanical techniques.
Frequency counters or high frequency heterodyne systems can be used. Here the unknown frequency is compared with harmonics of a known lower frequency by use of a low frequency generator, a harmonic generator and a mixer. Accuracy of the measurement is limited by the accuracy and stability of the reference source.
Mechanical methods require a tunable resonator of some form, which has a known relation between a physical dimension and frequency.
An alternative mechanical technique is to use a slotted waveguide or slotted coaxial line to directly measure the wavelength. These devices consist of a probe introduced into the line through a longitudinal slot, so that the probe is free to travel up and down the line. Slotted lines are primarily intended for measurement of the voltage standing wave ratio on the line. However, provided a standing wave is present, they may also be used to measure the distance between the nodes, which is equal to half the wavelength. Precision of this method is limited by the determination of the nodal locations.
Health effects
Microwaves contain insufficient energy to directly chemically change substances by ionization, and so are an example of nonionizing radiation. The word "radiation" refers to the fact that energy can radiate. The term in this context is not to be confused with radioactivity. It has not been shown conclusively that microwaves (or other nonionizing electromagnetic radiation) have significant adverse biological effects at low levels. This is separate from the risks associated with very high intensity exposure, which can cause heating and burns like any heat source, and not a unique property of microwaves specifically.
During World War II, it was observed that individuals in the radiation path of radar installations experienced clicks and buzzing sounds in response to the microwaves radiation. This microwave auditory effect was thought to be caused by the microwaves inducing an electric current in the hearing centers of the brain.[3] Research by NASA in the 1970s has shown this to be caused by thermal expansion in parts of the inner ear.
When injury from exposure to microwaves occurs, it usually results from dielectric heating induced in the body. Exposure to microwave radiation can produce cataracts by this mechanism, because the microwave heating denatures proteins in the crystalline lens of the eye (in the same way that heat turns egg whites white and opaque) faster than the lens can be cooled by surrounding structures. The lens and cornea of the eye are especially vulnerable because they contain no blood vessels that can carry away heat. Exposure to heavy doses of microwave radiation (as from an oven that has been tampered with to allow operation even with the door open) can produce heat damage in other tissues as well, up to and including serious burns which may not be immediately evident because of the tendency for microwaves to heat deeper tissues with higher moisture content.
History and research
Perhaps the first, documented, formal use of the term microwave occurred in 1931:
- "When trials with wavelengths as low as 18 cm were made known, there was undisguised surprise that the problem of the micro-wave had been solved so soon." Telegraph & Telephone Journal XVII. 179/1
In 1943: the Hungarian engineer Zoltán Bay sent ultra-short radio waves to the moon, which, reflected from there worked as a radar, and could be used to measure distance, as well as to study the moon. [4]
Perhaps the first use of the word microwave in an astronomical context occurred in 1946 in an article "Microwave Radiation from the Sun and Moon" by Robert Dicke and Robert Beringer.
Some of the history in the development of electromagnetic theory applicable to modern microwave applications see the following figures:
Specific significant areas of research and work developing microwaves and their applications:
Work carried out by | Area of work |
---|---|
Barkhausen and Kurz | Positive grid oscillators |
Hull | Smooth bore magnetron |
Varian Brothers | Velocity modulated electron beam → klystron tube |
Randall and Boot | Cavity magnetron |
See also
- Cosmic microwave background radiation
- Electron cyclotron resonance
- Microwave auditory effect
- Rain fade
- Microwave chemistry
- Microwave Plasma Enhanced Chemical Vapour Deposition
- Microwave radio relay
- Thing (listening device)
- Tropospheric scatter
References
- ^ Pozar, David M. (1993). Microwave Engineering Addison-Wesley Publishing Company. ISBN 0-201-50418-9.
- ^ Raytheon's Silent Guardian millimeter wave weapon
- ^ Philip L. Stocklin, US Patent 4,858,612, December 19, 1983
- ^ http://dieselpingwin.multiply.com/reviews/item/8
External links
- EM Talk, Microwave Engineering Tutorials and Tools
- Microwave Irradiation for Negative Refraction by using Metamaterials
- Microwaves101, web resource covering the fundamental principles of microwave design
- Applications of Microwaves in Medicine
- Microwave Technology Video
- Microwave Digestion Platform by Anton Paar