In probability and statistics, an exponential family is a set of probability distributions of a certain form, specified below. This special form is chosen for mathematical convenience, on account of some useful algebraic properties, as well as for generality, as exponential families are in a sense very natural sets of distributions to consider. The concept of exponential families is credited toE. J. G. Pitman,G. Darmois, and B. O. Koopman in 1935–36. The term exponential class is sometimes used in place of "exponential family".
The exponential family of distributions provides a general framework for selecting a possible alternative parameterisation of the distribution, in terms of natural parameters, and for defining useful sample statistics, called the natural sufficient statistics of the family. For more information, see below.
Most of the commonly used distributions are in the exponential family, listed in the subsection below. The subsections following it are a sequence of increasingly more general mathematical definitions of an exponential family. A casual reader may wish to restrict attention to the first and simplest definition, which corresponds to a single-parameter family of discrete or continuous probability distributions.
Examples of exponential family distributions
The exponential families include many of the most common distributions. Among many others, the family includes the following:
where T(x), h(x), η(θ), and A(θ) are known functions.
An alternative, equivalent form often given is
The value θ is called the parameter of the family.
In addition, the support of (i.e the set of all for which is greater than 0) does not depend on .  This can be used to exclude a distribution from the exponential family. For example, the Paretodistribution has a pdf which is defined for ( being the scale parameter) and its support, therefore, has a lower limit of . Since the support of is dependent on the value of the parameter, the Paretodistribution is not part of the exponential family of distributions.
Note that x is often a vector of measurements, in which case T(x) may be a function from the space of possible values of x to the real numbers. More generally, η(θ) and T(x) can each be vector-valued such that is real-valued.
If η(θ) = θ, then the exponential family is said to be in canonical form. By defining a transformed parameter η = η(θ), it is always possible to convert an exponential family to canonical form. The canonical form is non-unique, since η(θ) can be multiplied by any nonzero constant, provided that T(x) is multiplied by that constant's reciprocal, or a constant c can be added to η(θ) and h(x) multiplied by to offset it.
Even when x is a scalar, and there is only a single parameter, the functions η(θ) and T(x) can still be vectors, as described below.
Note also that the function A(θ), or equivalently g(θ), is automatically determined once the other functions have been chosen, since it must assume a form that causes the distribution to be normalized (sum or integrate to one over the entire domain). Furthermore, both of these functions can always be written as functions of η, even when η(θ) is not a one-to-one function, i.e. two or more different values of θ map to the same value of η(θ), and hence η(θ) cannot be inverted. In such a case, all values of θ mapping to the same η(θ) will also have the same value for A(θ) and g(θ).
What is important to note, and what characterizes all exponential family variants, is that the parameter(s) and the observation variable(s) must factorize (can be separated into products each of which involves only one type of variable), either directly or within either part (the base or exponent) of an exponentiation operation. Generally, this means that all of the factors constituting the density or mass function must be of one of the following forms:
where f and h are arbitrary functions of x; g and j are arbitrary functions of θ; and c is an arbitrary "constant" expression (i.e. an expression not involving x or θ).
There are further restrictions on how many such factors can occur. For example, the two expressions:
are the same, i.e. a product of two "allowed" factors. However, when rewritten into the factorized form,
it can be seen that it cannot be expressed in the required form. (However, a form of this sort is a member of a curved exponential family, which allows multiple factorized terms in the exponent.)
To see why an expression of the form
qualifies, note that
and hence factorizes inside of the exponent. Similarly,
and again factorizes inside of the exponent.
Note also that a factor consisting of a sum where both types of variables are involved (e.g. a factor of the form ) cannot be factorized in this fashion (except in some cases where occurring directly in an exponent); this is why, for example, the Cauchy distribution and Student's t distribution are not exponential families.
The definition in terms of one real-number parameter can be extended to one real-vector parameter
A family of distributions is said to belong to a vector exponential family if the probability density function (or probability mass function, for discrete distributions) can be written as
Or in a more compact form,
This form writes the sum as a dot product of vector-valued functions and .
An alternative, equivalent form often seen is
As in the scalar valued case, the exponential family is said to be in canonical form if
A vector exponential family is said to be curved if the dimension of
is less than the dimension of the vector
That is, if the dimension of the parameter vector is less than the number of functions of the parameter vector in the above representation of the probability density function. Note that most common distributions in the exponential family are not curved, and many algorithms designed to work with any member of the exponential family implicitly or explicitly assume that the distribution is not curved.
Note that, as in the above case of a scalar-valued parameter, the function or equivalently is automatically determined once the other functions have been chosen, so that the entire distribution is normalized. In addition, as above, both of these functions can always be written as functions of , regardless of the form of the transformation that generates from . Hence an exponential family in its "natural form" (parametrized by its natural parameter) looks like
Note that the above forms may sometimes be seen with in place of . These are exactly equivalent formulations, merely using different notation for the dot product.
The vector-parameter form over a single scalar-valued random variable can be trivially expanded to cover a joint distribution over a vector of random variables. The resulting distribution is simply the same as the above distribution for a scalar-valued random variable with each occurrence of the scalar x replaced by the vector
Note that the dimension k of the random variable need not match the dimension d of the parameter vector, nor (in the case of a curved exponential function) the dimension s of the natural parameter and sufficient statisticT(x).
Suppose H is a non-decreasing function of a real variable. Then Lebesgue–Stieltjes integrals with respect to dH(x) are integrals with respect to the "reference measure" of the exponential family generated by H.
Any member of that exponential family has cumulative distribution function
If F is a continuous distribution with a density, one can write dF(x) = f(x) dx.
In the definitions above, the functions T(x), η(θ) and A(η) were apparently arbitrarily defined. However, these functions play a significant role in the resulting probability distribution.
T(x) is a sufficient statistic of the distribution. For exponential families, the sufficient statistic is a function of the data that fully summarizes the data x within the density function. This means that, for any data sets x and y, the density value is the same if T(x) = T(y). This is true even if x and y are quite different—that is, . The dimension of T(x) equals the number of parameters of θ and encompasses all of the information regarding the data related to the parameter θ. The sufficient statistic of a set of independent identically distributed data observations is simply the sum of individual sufficient statistics, and encapsulates all the information needed to describe the posterior distribution of the parameters, given the data (and hence to derive any desired estimate of the parameters). This important property is further discussed below.
η is called the natural parameter. The set of values of η for which the function is finite is called the natural parameter space. It can be shown that the natural parameter space is always convex.
A(η) is called the log-partition function because it is the logarithm of a normalization factor, without which would not be a probability distribution ("partition function" is often used in statistics as a synonym of "normalization factor"):
The function A is important in its own right, because the mean, variance and other moments of the sufficient statistic T(x) can be derived simply by differentiating A(η). For example, because ln(x) is one of the components of the sufficient statistic of the gamma distribution, can be easily determined for this distribution using A(η). Technically, this is true because
Exponential families have a large number of properties that make them extremely useful for statistical analysis. In many cases, it can be shown that, except in a few exceptional cases, only exponential families have these properties. Examples:
In the mean-field approximation in variational Bayes (used for approximating the posterior distribution in large Bayesian networks), the best approximating posterior distribution of an exponential-family node (a node is a random variable in the context of Bayesian networks) with a conjugate prior is in the same family as the node.
It is critical, when considering the examples in this section, to remember the discussion above about what it means to say that a "distribution" is an exponential family, and in particular to keep in mind that the set of parameters that are allowed to vary is critical in determining whether a "distribution" is or is not an exponential family.
Some distributions are exponential families only if some of their parameters are held fixed. The family of Pareto distributions with a fixed minimum bound xm form an exponential family. The families of binomial and multinomial distributions with fixed number of trials n but unknown probability parameter(s) are exponential families. The family of negative binomial distributions with fixed number of failures (a.k.a. stopping-time parameter) r is an exponential family. However, when any of the above-mentioned fixed parameters are allowed to vary, the resulting family is not an exponential family.
As mentioned above, as a general rule, the support of an exponential family must remain the same across all parameter settings in the family. This is why the above cases (e.g. binomial with varying number of trials, Pareto with varying minimum bound) are not exponential families — in all of the cases, the parameter in question affects the support (particularly, changing the minimum or maximum possible value). For similar reasons, neither the discrete uniform distribution nor continuous uniform distribution are exponential families regardless of whether one of the bounds is held fixed. (If both bounds are held fixed, the result is a single distribution, not a family at all.)
The Weibull distribution with fixed shape parameter k is an exponential family. Unlike in the previous examples, the shape parameter does not affect the support; the fact that allowing it to vary makes the Weibull non-exponential is due rather to the particular form of the Weibull's probability density function (k appears in the exponent of an exponent).
The following table shows how to rewrite a number of common distributions as exponential-family distributions with natural parameters. Refer to the flashcards for main exponential families.
For a scalar variable and scalar parameter, the form is as follows:
For a scalar variable and vector parameter:
For a vector variable and vector parameter:
The above formulas choose the functional form of the exponential-family with a log-partition function . The reason for this is so that the moments of the sufficient statistics can be calculated easily, simply by differentiating this function. Alternative forms involve either parameterizing this function in terms of the normal parameter instead of the natural parameter, and/or using a factor outside of the exponential. The relation between the latter and the former is:
To convert between the representations involving the two types of parameter, use the formulas below for writing one type of parameter in terms of the other.
Three variants with different parameterizations are given, to facilitate computing moments of the sufficient statistics.
NOTE: Uses the fact that i.e. the trace of a matrix product is much like a dot product. The matrix parameters are assumed to be vectorized (laid out in a vector) when inserted into the exponential form. Also, V and X are symmetric, so e.g.
Variant 1 uses k natural parameters with a simple relation between the standard and natural parameters; however, only k−1 of the natural parameters are independent, and the set of k natural parameters is nonidentifiable. The constraint on the usual parameters translates to a similar constraint on the natural parameters.
Variant 2 demonstrates the fact that the entire set of natural parameters is nonidentifiable: Adding any constant value to the natural parameters has no effect on the resulting distribution. However, by using the constraint on the natural parameters, the formula for the normal parameters in terms of the natural parameters can be written in a way that is independent on the constant that is added.
Variant 3 shows how to make the parameters identifiable in a convenient way by setting This effectively "pivots" around pk and causes the last natural parameter to have the constant value of 0. All the remaining formulas are written in a way that does not access pk, so that effectively the model has only k−1 parameters, both of the usual and natural kind.
Note also that variants 1 and 2 are not actually standard exponential families at all. Rather they are curved exponential families, i.e. there are k−1 independent parameters embedded in a k-dimensional parameter space. Many of the standard results for exponential families do not apply to curved exponential families. An example is the log-partition function A(x), which has the value of 0 in the curved cases. In standard exponential families, the derivatives of this function correspond to the moments (more technically, the cumulants) of the sufficient statistics, e.g. the mean and variance. However, a value of 0 suggests that the mean and variance of all the sufficient statistics are uniformly 0, whereas in fact the mean of the ith sufficient statistic should be pi. (This does emerge correctly when using the form of A(x) in variant 3.)
Moments and cumulants of the sufficient statistic
We start with the normalization of the probability distribution. In general, any non-negative function f(x) that serves as the kernel of a probability distribution (the part encoding all dependence on x) can be made into a proper distribution by normalizing: i.e.
In particular, using the properties of the cumulant generating function,
The first two raw moments and all mixed second moments can be recovered from these two identities. Higher order moments and cumulants are obtained by higher derivatives. This technique is often useful when T is a complicated function of the data, whose moments are difficult to calculate by integration.
Another way to see this that does not rely on the theory of cumulants is to begin from the fact that the distribution of an exponential family must be normalized, and differentiate. We illustrate using the simple case of a one-dimensional parameter, but an analogous derivation holds more generally.
In the one-dimensional case, we have
This must be normalized, so
Take the derivative of both sides with respect to η:
The final example is one where integration would be extremely difficult. This is the case of the Wishart distribution, which is defined over matrices. Even taking derivatives is a bit tricky, as it involves matrix calculus, but the respective identities are listed in that article.
From the above table, we can see that the natural parameter is given by
the reverse substitutions are
and the sufficient statistics are
The log-partition function is written in various forms in the table, to facilitate differentiation and back-substitution. We use the following forms:
Expectation of X (associated with η1)
To differentiate with respect to η1, we need the following matrix calculus identity:
The last line uses the fact that V is symmetric, and therefore it is the same when transposed.
The exponential family arises naturally as the answer to the following question: what is the maximum-entropy distribution consistent with given constraints on expected values?
The information entropy of a probability distribution dF(x) can only be computed with respect to some other probability distribution (or, more generally, a positive measure), and both measures must be mutually absolutely continuous. Accordingly, we need to pick a reference measuredH(x) with the same support as dF(x).
The entropy of dF(x) relative to dH(x) is
where dF/dH and dH/dF are Radon–Nikodym derivatives. Note that the ordinary definition of entropy for a discrete distribution supported on a set I, namely
assumes, though this is seldom pointed out, that dH is chosen to be the counting measure on I.
Consider now a collection of observable quantities (random variables) Ti. The probability distribution dF whose entropy with respect to dH is greatest, subject to the conditions that the expected value of Ti be equal to ti, is a member of the exponential family with dH as reference measure and (T1, ..., Tn) as sufficient statistic.
The derivation is a simple variational calculation using Lagrange multipliers. Normalization is imposed by letting T0 = 1 be one of the constraints. The natural parameters of the distribution are the Lagrange multipliers, and the normalization factor is the Lagrange multiplier associated to T0.
According to the Pitman–Koopman–Darmois theorem, among families of probability distributions whose domain does not vary with the parameter being estimated, only in exponential families is there a sufficient statistic whose dimension remains bounded as sample size increases.
Less tersely, suppose Xk, (where k = 1, 2, 3, ... n) are independent, identically distributed random variables. Only if their distribution is one of the exponential family of distributions is there a sufficient statisticT(X1, ..., Xn) whose number of scalar components does not increase as the sample size n increases; the statistic T may be a vector or a single scalar number, but whatever it is, its size will neither grow nor shrink when more data are obtained.
where s is the dimension of and and are hyperparameters (parameters controlling parameters). ν corresponds to the effective number of observations that the prior distribution contributes, and corresponds to the total amount that these pseudo-observations contribute to the sufficient statistic over all observations and pseudo-observations. is a normalization constant that is automatically determined by the remaining functions and serves to ensure that the given function is a probability density function (i.e. it is normalized). and equivalently are the same functions as in the definition of the distribution over which π is the conjugate prior.
A conjugate prior is one which, when combined with the likelihood and normalised, produces a posterior distribution which is of the same type as the prior. For example, if one is estimating the success probability of a binomial distribution, then if one chooses to use a beta distribution as one's prior, the posterior is another beta distribution. This makes the computation of the posterior particularly simple. Similarly, if one is estimating the parameter of a Poisson distribution the use of a gamma prior will lead to another gamma posterior. Conjugate priors are often very flexible and can be very convenient. However, if one's belief about the likely value of the theta parameter of a binomial is represented by (say) a bimodal (two-humped) prior distribution, then this cannot be represented by a beta distribution. It can however be represented by using a mixture density as the prior, here a combination of two beta distributions; this is a form of hyperprior.
An arbitrary likelihood will not belong to the exponential family, and thus in general no conjugate prior exists. The posterior will then have to be computed by numerical methods.
To show that the above prior distribution is a conjugate prior, we can derive the posterior.
First, assume that the probability of a single observation follows an exponential family, parameterized using its natural parameter:
Then, for data , the likelihood is computed as follows:
Then, for the above conjugate prior:
We can then compute the posterior as follows:
The last line is the kernel of the posterior distribution, i.e.
This shows that the posterior has the same form as the prior.
Note in particular that the data X enters into this equation only in the expression
which is termed the sufficient statistic of the data. That is, the value of the sufficient statistic is sufficient to completely determine the posterior distribution. The actual data points themselves are not needed, and all sets of data points with the same sufficient statistic will have the same distribution. This is important because the dimension of the sufficient statistic does not grow with the data size — it has only as many components as the components of (equivalently, the number of parameters of the distribution of a single data point).
The update equations are as follows:
This shows that the update equations can be written simply in terms of the number of data points and the sufficient statistic of the data. This can be seen clearly in the various examples of update equations shown in the conjugate prior page. Note also that because of the way that the sufficient statistic is computed, it necessarily involves sums of components of the data (in some cases disguised as products or other forms — a product can be written in terms of a sum of logarithms). The cases where the update equations for particular distributions don't exactly match the above forms are cases where the conjugate prior has been expressed using a different parameterization than the one that produces a conjugate prior of the above form — often specifically because the above form is defined over the natural parameter while conjugate priors are usually defined over the actual parameter
Hypothesis testing: uniformly most powerful tests