Porsche 911 (classic)

For the full lineage of the Porsche 911 models, see Porsche 911.

Porsche 911 (classic)
Overview
Manufacturer	Porsche AG
Also called	Porsche 911 Carrera Porsche Carrera
Production	1964–1989
Assembly	Stuttgart-Zuffenhausen, West Germany
Designer	Ferdinand Alexander Porsche, Erwin Komenda
Body and chassis
Class	Sports car (S)
Body style	2-door coupé 2-door Targa top (1966–89) 2-door convertible (1982–89)
Layout	Rear-engine, rear-wheel drive
Related	Porsche 912 Porsche 959 Porsche 930
Powertrain
Engine	all variants air-cooled flat-6 (H6) 2.0 L 110–170 PS (81–125 kW) 2.2 L 125–180 PS (92–132 kW) 2.4 L 130–190 PS (96–140 kW) 2.7 L 150–210 PS (110–150 kW) 3.0 L 180–204 PS (132–150 kW) 3.2 L 207 PS (152 kW)–231 PS (170 kW) 3.0 L Turbo 260 PS (190 kW) 3.3 L Turbo intercooled 300 PS (220 kW)
Transmission	5-speed manual 4-speed automatic
Dimensions
Wheelbase	2,211–2,268 mm (87.0–89.3 in)
Length	4,290 mm (168.9 in)
Width	1,700–1,780 mm (66.9–70.1 in)
Height	1,300–1,310 mm (51.2–51.6 in)
Chronology
Predecessor	Porsche 356
Successor	Porsche 964

Porsche 911 in hillclimb

The original Porsche 911 (pronounced nine eleven, Template:Lang-de) was a luxury sports car made by Porsche AG of Stuttgart, Germany. The famous, distinctive, and durable design was introduced in autumn 1963 and built through 1989. It was succeeded by a modified version, internally referred to as Porsche 964 but still sold as Porsche 911, as are current models.

Mechanically, the 911 was notable for being rear engined and air-cooled. From its inception the 911 was modified both by private teams and the factory itself for racing, rallying and other types of automotive competition. The original 911 series is often cited as the most successful competition car ever, especially when its variations are included, mainly the powerful 911-derived 935 which won 24 Hours of Le Mans and other major sports cars races outright against prototypes.

Introduction

The Porsche 911 was developed as a much more powerful, larger, more comfortable replacement for the Porsche 356. The new car made its public debut at the 1963 Internationale Automobil-Ausstellung, better known to English speakers as the Frankfurt Motor Show.

It was initially designated as the "Porsche 901", after its internal project number. However, Peugeot protested on the grounds that in France it had exclusive rights to car names formed by three numbers with a zero in the middle. So, instead of selling the new model with another name in France, Porsche changed the name to 911. It went on sale in 1964.

2.0-litre / O, A and B series (1964–1969)

The earliest editions of the 911 had a 130 PS (96 kW) flat-6 engine, in the "boxer" configuration like the 356, air-cooled and rear-mounted, displaced 1991 cc compared with the 356's four-cylinder, 1600 cc unit. The car had four seats although the rear seats are very small, and the car is usually called a 2+2 rather than a four-seater (the 356 was also a 2+2). It was mated to a five-speed manual "Type 901" transmission. The styling was largely by Ferdinand "Butzi" Porsche, son of Ferdinand "Ferry" Porsche. Erwin Komenda, the leader of the Porsche car body construction department, was also involved in the design.

The 356 came to the end of its production life in 1965, but there was still a market for a 4-cylinder car, particularly in the USA. The Porsche 912, introduced the same year, served as a direct replacement. It used the 356's 4-cylinder, 1600 cc, 90 hp (67 kW) engine but wore the 911 bodywork.

In 1967 Porsche introduced the more powerful 911S, the engine's power raised to 160 PS (120 kW; 160 hp). Alloy wheels from Fuchs, in a distinctive 5-leaf design, were offered for the first time. In motorsport at the same time, installed in the mid-engined Porsche 904 and Porsche 906, the engine was developed to 210 PS (154 kW).

In 1967 the Targa version was introduced as a "stop gap" model. The Targa had a stainless steel-clad roll bar, as Porsche had, at one point, thought that the National Highway Traffic Safety Administration (NHTSA) would outlaw fully open convertibles in the US, an important market for the 356. The name "Targa" (which means "shield" in Italian) came from the Targa Florio sports car road race in Sicily, Italy in which Porsche had notable success, with seven victories since 1956, and four more to come until 1973. This last win in the subsequently discontinued event is especially notable as it was scored with a 911 Carrera RS against prototypes entered by Italian factories of Ferrari and Alfa Romeo. The road going Targa was equipped with a removable roof panel and a removable plastic rear window (although a fixed glass version was offered alongside from 1968).

The 110 PS (81 kW; 110 hp) 911T was also launched in 1967 and effectively replaced the 912. The staple 130 PS (96 kW; 130 hp) model was renamed the 911L. The 911R had a very limited production (20 in all). This was a lightweight racing version with thin aluminium doors, a magnesium crankcase, twin-spark cylinder heads, and a power output of 210 PS (150 kW; 210 hp).

In 1969 the B series was introduced: the wheelbase for all 911 and 912 models was increased from 2,211 to 2,268 millimetres (87.0 to 89.3 in), an effective remedy to the car's nervous handling at the limit. The overall length of the car did not change: rather, the rear wheels were relocated aft. Fuel injection arrived for the 911S and for a new middle model, 911E. A semi-automatic Sportomatic model, composed of a torque converter, an automatic clutch, and the four-speed transmission, was added to the product lineup.

B17 (1969)

Porsche 911 B17.

A concept designed by Pininfarina, lengthening the wheelbase by 7.5 in (190 mm) and resulting in a car that weighed almost 2,500 lb (1,100 kg), considerably heavier than the original.

2.2-litre / C and D series (1969–1971)

For MY 1970 the engines of all 911s were increased to 2,195 cc (2.195 L; 133.9 cu in). Power outputs were uprated to 125 PS (92 kW; 123 hp) in the 911T, 155 PS (114 kW; 153 hp) in the 911E, and 180 PS (130 kW; 180 hp) in the 911S. The 912 was discontinued, thanks to the introduction of the Porsche 911T as an entry model.

The 2.2 L 911E was called "The secret weapon from Zuffenhausen". Despite the lower power output of the 911E compared to the 911S, the 911E was quicker in acceleration up to 160 km/h (99 mph).

C 20 (1970)

It was a prototype extended by 13.6 in (345 mm) over stock car, with 911S engine.

2.4-litre / E and F series (1971–1973)

1972 Porsche 911 T Targa with removable roof. Notice the oil filler door on the rear right fender, which is only found on the 1972 model.

The 1972–1973 model years consisted of the same models of 911— the entry level T, the midrange E and the top of the line S. However, all models got a new, larger 2,341 cc (2.341 L; 142.9 cu in) engine. This is universally known as the "2.4L" engine, despite its displacement being closer to 2.3 litres— perhaps to emphasize the increase over the 2.2 L. The new power ratings were 130 hp (97 kW), or 140 hp (104 kW) in the U.S., for the T, 165 hp (123 kW) for the E and 190 hp (142 kW) for the S.

The 911E and 911S used mechanical fuel injection (MFI) in all markets. The 911T was carbureted, except in the US where it also used MFI, which accounts for the 7 kW (9 hp) power difference between the two. In January, 1973, US 911Ts were switched to the new K-Jetronic CIS (Continuous Fuel Injection) system from Bosch. These CIS-powered cars are usually referred to as "1973.5" models by enthusiasts.

With the power and torque increases, the 2.4 L cars also got a newer, stronger transmission, identified by its Porsche type number 915. Derived from the transmission in the Porsche 908 race car, the 915 did away with the 901/911 transmission's "dog-leg" style first gear arrangement, opting for a traditional H pattern with first gear up to the left, second gear underneath first, etc. Some say this was because the dog-leg shift to second gear was inconvenient for city driving, other say it was due to Porsche’s desire to put 5th gear outside the main transmission housing where it could easily be changed for different races. The Sportomatic transmission was still available but only as a special order.

In 1972 a tremendous effort was made to improve the handling of the 911. Due to the 911's unusual engine placement (rear-mounted, with most of the vehicle's weight concentrated over the rear axle) early 911's were prone to oversteer when driven at the limit, and could easily spin in the hands of an inexperienced driver. In an attempt to remedy this, Porsche relocated the oil tank from its position behind the right rear wheel to in front of it. This had the effect of moving the weight of almost 9 quarts (8.5 L) of oil from outside the wheelbase to inside, improving weight distribution and thus, handling. To facilitate filling of the oil tank, Porsche installed an oil filler door (much like the fuel filler door on the left front fender) on the right rear quarter panel. Unfortunately, this unique design was scrapped after only one year, some say because inattentive gas station attendants were putting gas in the oil tank. The oil tank was subsequently moved back to its original position for model year 1973, and remained there until it was moved back within the wheelbase for the 964 models.

911S models also gained a discreet spoiler under the front bumper to improve high-speed stability. With the car's weight only 1050 kg (2315 lb), these are often regarded as the best classic mainstream 911s. For racing at this time, the 911 ST was produced in limited numbers (the production run for the ST only lasted from 1970 to 1971.) The cars were available with engines of either 2466 cc or 2492 cc, producing 270 PS (199 kW) at 8000 rpm. Weight was down to 960 kg (2166 lb). The cars had success at the Daytona 6 Hours, the Sebring 12 Hours, the 1000 km Nürburgring and the Targa Florio.

Carrera RS (1973 and 1974)

A 1973 Porsche 911 Carrera RS

These models, valued by collectors, are considered by many to be the greatest classic 911s of all-time. RS stands for Rennsport in German, meaning "racing sport". The Carrera name was reintroduced from the 356 Carrera which had itself been named after Porsche's victories in the Carrera Panamericana races in Mexico in the 1950s. The RS was built so that Porsche could enter racing formulae that demanded that a certain minimum number of production cars were made. Compared with a standard 911S, the Carrera 2.7 RS had a larger engine (2687 cc) developing 210 PS (150 kW; 210 hp) with MFI, revised and stiffened suspension, a "ducktail" rear spoiler, larger brakes, wider rear wheels and rear wings. In RS Touring form it weighed 1075 kg (2370 lb), in Sport Lightweight form it was about 100 kg (220 lb) lighter, the saving coming from the thin-gauge steel used for parts of the bodyshell and also the use of thinner glass. In total, 1580 were made, comfortably exceeding the 500 that had to be made to qualify for the vital FIA Group 4 class. 49 Carrera RSR cars were built with 2808 cc engines producing 300 PS (221 kW).

In 1974, Porsche created the Carrera RS 3.0 with K-Jetronic Bosch fuel injection producing 230 PS (169 kW).It was almost twice as expensive as the 2.7 RS but offered a fair amount of racing capability for that price. The chassis was largely similar to that of the 1973 Carrera RSR and the brake system was from the Porsche 917. The use of thin metal plate panels and a spartan interior enabled the shipping weight to be reduced to around 900 kg (1984 lb).

Porsche RSR with Gijs van Lennep at the Nürburgring 1974

1976 Porsche 911 2.7

The Carrera RSR 3.0 and Carrera RSR Turbo (its 2.1 L engine due to a 1.4x equivalency formula) were made in tiny numbers for racing. The turbo car came second at the 24 Hours of Le Mans in 1974, a significant event in that its engine would form the basis of many future Porsche attempts in sportscar racing, and can be regarded as the start of its commitment to turbocharging.

2.7-litre / G, H, I and J series (1974–1977)

The new impact bumper

MY 1974 was the introduction of impact bumpers to conform with low speed protection requirements of US law, these bumpers being so successfully integrated into the design that they remained unchanged for 15 years. In 1974 the engine size was increased to 2687 cc giving an increase in torque. The use of K-Jetronic CIS Bosch fuel injection in two of the three models in the line up— the 911 and 911S models, retaining the narrow rear wings of the old 2.4, now had a detuned version of the RS engine producing 150 and 175 bhp (110 and 129 kW) respectively.

Carrera 2.7 / G and H (1974-1975)

The Carrera 2.7 was mechanically identical to the 1973 RS, inheriting its 210 bhp (154 kW) MFI engine and still weighed the same at 1075 kg (2370 lb). It had the wide RS rear wings and also the ducktail for the 1974 model (except for the German market). It was available either as a coupe or a Targa. For 1976 a special run of 113 coupes with MFI were made. In addition 30 MFI Targas with narrow rear wings were made for the Belgian police.

The US Carrera 2.7 was restricted to the 2.7 K-Jetronic engine as the MFI RS engine was banned on emission grounds. Power output was 175 bhp, later being reduced to 165 bhp, and in California 160 bhp.

The well known problem of pulled cylinder head studs with the K-Jetronic 2.7 engine only occurred in hot climates. This emerged in 1975 in California where thermal reactors, aimed at reducing emissions, were fitted below the cylinder heads thus causing heat build up around the magnesium crankcase and then made worse by the lean running K-Jetronic CIS. The fitting of a 5-blade engine fan instead of the usual 11-blade further compounded the situation. Bearing in mind Porsche's largest market being the USA, the 930 Turbo, Carrera 3.0 and all subsequent models used aluminium alloy crankcases which were around 15 lb (7 kg) heavier.

The Bosch K-Jetronic CIS varied fuel pressure to the injectors dependent on the mass airflow. While this system was exceedingly reliable, it did not allow the use of as "hot" cams as MFI or carburettors allowed. Therefore, the 911S's horsepower decreased from 190 to 175 PS (140–128 kW) despite the displacement increase from 2.4 to 2.7 L. However, the engine did have increased drivability.

Also produced for the 1976 "model year", for the U.S. market, was the 912E, a 4-cylinder version of the 911 like the 912 that had last been produced in 1969. It used the I-series chassis and the 2.0 Volkswagen engine from the Porsche 914. In all, 2099 units were produced. In 1976 the Porsche 924 took this car's place for the 1977 "model year" and beyond. The power was supplied by a 4-cylinder high-performance fuel injection motor also used in the 411 Volkswagen. Less than 6000 were built.

Carrera 3.0 (1976–1977)

The Carrera 3.0 was given the same diecast aluminium crankcase as the 930 or ’911 Turbo’. Its 3-litre engine had K-Jetronic CIS fuel injection. Power output was slightly down on the Carrera 2.7 at 200 bhp although the 188 lb/ft of torque was now available at 4200 rpm. Weight was up by 45 kg to 1120 kg.

During its two-year life span, only 3687 cars were built. Of these 2564 were coupés and 1123 Targas.

Turbo (Type 930) (1974–1989)

Main article: Porsche 930

In 1974 Porsche introduced the first production turbocharged 911. Although called simply Porsche 911 Turbo in Europe, it was marketed as Porsche 930 (930 being its internal type number) in North America. The body shape is distinctive, thanks to wide wheel-arches to accommodate the wide tires, and a large rear spoiler often known as a "whale tail" on the early cars, and "tea-tray" on the later ones. Starting out with a 3.0 L engine 260 PS (190 kW; 260 hp), it rose to 3.3 L 300 PS (220 kW; 300 hp) for 1978. The early cars are known for their exhilarating acceleration coupled with challenging handling characteristics and extreme turbo lag.

Production figures of the car soon qualified its racing version for FIA Group 4 competition as the Porsche 934 of 1976. Many participated at Le Mans and other races including some epic battles with the BMW 3.0 CSL "Batmobile". The wilder Porsche 935, a finer tuned car in FIA Group 5 and evolved from the 2.1 L RSR Turbo of 1974, was campaigned in 1976 by the factory and won Le Mans in 1979. Private teams continued to compete successfully with the car until well into the 1980s.

Due to ever more draconian emissions regulations, the 930 was withheld from the important US and Japanese markets from 1981 through 1985. In the same time period, Porsche was involved in several wrongful death lawsuits in California related to the 930, even involving privately imported European market 930's. It was finally re-introduced into the United States in 1986.

As demand for the Turbo soared in the late 1980s, Porsche introduced novelty variants including a slant-nose version (option M505/M506), while not significantly improving the range mechanically. Although these cars could be sold for extraordinary premiums over the standard models, the company's reluctance to invest in research and development of the entire 911 line at that time turned out to be an almost fatal decision not only for the 911, but for the company.

Only in 1989, its last year of production, was the 930 equipped with a five-speed gearbox. The 930 was replaced in 1990 with a 964 version featuring the same 3.3 L engine.

There have been turbocharged variants of each subsequent generation of 911.

SC / L, M, A, B, C and D series (1978–1983)

Porsche 911SC Targa

1983 Porsche 911SC

Starting in MY 1978, the new 3.0 L 911 SC (2994 cc) was now the basic 911 model. It was in effect a Carrera 3 (known as a 911S in the US) detuned to provide 180 PS (132 kW). The "SC" designation was reintroduced by Porsche for the first time since the 356 SC (as distinguished from the race-engined 356 Carrera). No Carrera versions were produced and the 930 Turbo remaining at the top of the range. Porsche’s engineers felt that the weight of the extra luxury, safety and emissions equipment on these cars was blunting performance compared to the earlier, lighter cars with the same power output, so in non-US cars, power was increased to 188 PS (138 kW) for 1980, then finally to 204 PS (150 kW). However, cars sold in the US market retained their lower-compression 180 PS engines throughout. This enabled them to be run on lower-octane fuel.

In model year 1980, Porsche offered a Weissach special edition version of the 911 SC, named after the town in Germany where Porsche has their research center. Designated M439, it was offered in two colors with the turbo whale tail & front chin spoiler, body color-matched Fuchs alloy wheels and other convenience features as standard. 408 cars were built for North America. In 1982, a Ferry Porsche Edition was made and a total of 200 cars were sold with this cosmetic package.

SCs sold in the UK could be specified with the Sport Group Package (UK) which added stiffer suspension, the rear spoiler, front rubber lip and black Fuchs wheels.

In 1981 a Cabriolet concept car was shown at the Frankfurt Motor Show. Not only was the car a true convertible, but it also featured four-wheel drive, although this was dropped in the production version. The first 911 Cabriolet debuted in late 1982, as a 1983 model. This was Porsche’s first cabriolet since the 356 of the mid-1960s. It proved very popular with 4,214 sold in its introductory year, despite its premium price relative to the open-top targa. Cabriolet versions of the 911 have been offered ever since.

It was during this time, that Porsche AG decided the long-term fate of the 911. In 1979 Porsche had made plans to replace the 911 with their new 928. Sales of the 911 remained so strong however, that Porsche revised its strategy and decided to inject new life into the 911 editions.

Peter W. Schutz (CEO Porsche AG 1981-1987) wrote:

“The decision to keep the 911 in the product line occurred one afternoon in the office of Dr Helmuth Bott de:Helmuth Bott, the Porsche operating board member responsible for all engineering and development. I noticed a chart on the wall of Professor Bott’s office. It depicted the ongoing development schedules for the three primary Porsche product lines: 944, 928 and 911. Two of them stretched far into the future, but the 911 program stopped at the end of 1981. I remember rising from my chair, walking over to the chart, taking a black marker pen, and extending the 911 program bar clean off the chart. I am sure I heard a silent cheer from Professor Bott, and I knew I had done the right thing. The Porsche 911, the company icon, had been saved, and I believe the company was saved with it.”

911 SC sales totaled 58,914 cars.

3.2 Carrera / E, F, G, H, I, J and K series (1984–1989)

1986 Porsche 911 Carrera Cabriolet

The Porsche 911 3.2 series were available in Coupe, Cabriolet and Targa styles.

With the 911’s future assured, 1983 saw the launch of a replacement for the successful SC series. It was the MY 1984 911 3.2 Carrera, reviving the Carrera name for the first time since 1977. The 911 3.2 Carrera was the last iteration in the original 911 series, with all subsequent models featuring new body styling with new brake, electronic and suspension technologies.

A new, higher-displacement motor, a 3.2-liter horizontally opposed flat 6 cylinder, was utilized. At the time, Porsche claimed it was 80% new. The new swept volume of 3164 cc was achieved using the 95 mm (3.7 in) bore (from the previous SC model) combined with the 1978 Turbo 3.3 crankshaft's 74.4 mm (2.9 in) stroke. In addition, higher domed pistons increased the compression ratio from 9.8 to 10.3:1 (although only 9.5:1 for the US market). New inlet manifold and exhaust systems were fitted. The 915 transmission was carried over from the SC series for the first three model years. In 1987, the Carrera got a new five-speed gearbox sourced from Getrag, model number G50 with proven Borg-Warner synchronizers. This slightly heavier version also featured a hydraulically operated clutch.

With the new engine, power was increased to 207 bhp (154 kW; 210 PS) at 5900 rpm for North American-delivered cars and to 231 bhp (172 kW; 234 PS) at 5900 rpm for most other markets. This version of the 911 accelerated 0– 60 mph (97 km/h) in 5.4 seconds and had a top speed of 150 mph (240 km/h) as measured by Autocar. Factory times were more modest: 0-60 mph time of 6.3 seconds for the US version and 6.1 seconds for cars outside the American market.

The disc brakes were increased in size to aid in more effective heat dissipation and improved oil-fed chain tensioners were fitted to the engine. To improve oil cooling, a finned cooler replaced the serpentine lines in the front passenger fender well. This was further improved in 1987, with the addition of a thermostatically controlled fan.

Driving refinement and motor reliability were improved with an upgrade of the fuel and ignition control components to a L-Jetronic with Bosch Motronics 2 DME (Digital Motor Electronics system). An improvement in fuel-efficiency was due to the DME providing a petrol cut-off on the overrun. Changes in the fuel map & chip programming from October 1986, further improved the power to 217 bhp (162 kW; 220 PS) at 5900 rpm for North American delivered cars as well as for other markets requesting low emissions, like Germany. Custom-mapped chips remain a popular upgrade. The fuel relay that is mounted externally on the DME is known to be a weak point of the system.

Three basic models were available throughout the Carrera years – coupé, targa and cabriolet. When launched in 1984 in the United States, the prices of the 911 Carrera lineup were $31,950 for the coupé, $33,450 for the targa and $36,450 for the cabriolet. Almost indistinguishable from the SC, external clues are the front fog lights, which were integrated into the front valance in the Carrera. Very modest cosmetic changes were made throughout the lifespan of the Carrera, with a redesigned dash featuring larger air conditioning vents appearing in 1986.

Two special editions of the Carrera were produced – the "Commemorative Edition" in 1988 to commemorate 250,000 911s produced and an "Anniversary" edition in 1989 which was the model’s 25th year of production. Both were cosmetic packages with limited production.

In 1984, Porsche also introduced the M491 option. Officially called the Supersport, it was commonly known as the "Turbo-look". It was a style that resembled the Porsche 930 Turbo with wide wheel arches and the distinctive "tea tray” tail. It featured the stiffer turbo suspension and the superior turbo braking system as well as the wider turbo wheels. Sales of the Supersport were particularly strong for its first two years in the United States because the desirable 930 was not available.

The 911 Speedster (option M503), a low-roof version of the Cabriolet which was evocative of the Porsche 356 Speedster of the 1950s, was produced in limited numbers (2104) between January 1989 and July 1989 as both a narrow body car and a Turbo-look, which also featured 930 brakes, wheels, suspension, and front valence. 171 narrow body examples were built, and 823 examples were built for the US market. It started as a design under Helmuth Bott in 1983 but was not manufactured until six years later. It was a two-seat convertible that featured a low swept windshield.

The 1987 Carrera Club Sport, of which 340 were produced, is a collectible 911 that had a blueprinted engine with a higher rev limit, and had the electric windows, electric seats, and radio removed to save a claimed 50 kg (110 lb) in weight.

Total production of the 911 3.2 Carrera series was 76,473 cars (35,670 coupé, 19,987 cabrio, 18,468 targa).

In late 1989, the 911 underwent a major evolution, with the introduction of the Type Porsche 964 (1989–1993).

Position vis-à-vis the Porsche 928

Main article: Porsche 928

When 911 sales began to decline by the early 1970s, Porsche executives approved work on the Porsche 928 in 1971. Larger, and featuring a front-mounted V8 engine considerably more powerful than the contemporary 911's flat six, the 928 was intended to be a comfortable grand tourer rather than a dedicated sports car. Capable of out-accelerating and even matching or exceeding the 911's cornering prowess in some model years, the 928 sold reasonably well from its introduction in 1977 until its discontinuation in 1995. In spite of its overall capability, it never outsold the 911; and unlike its smaller, sportier sibling, it achieved little success in racing.

Motorsport

The Porsche factory's first 911-based race car was a lightly modified 1964 Type 901. It finished fifth in the 1965 Monte Carlo Rally and is now housed in the Porsche Museum.

Porsche 911s dominated the Trans Am Series under two liter class in the sixties, winning the championship from 1967-1969. They would later go on to win the championship in 1973, 1974, and 1980. Despite Trans Am being a sedan championship in its early years, the Porsche 911 was a sports car. Its inclusion is likely due to its resemblance to a coupé.

Further reading

• Frère, P (2006). Porsche 911 Story (eighth edition). J H Haynes & Co Ltd. ISBN 1-84425-301-5
• Meredith, L (2000). Porsche 911. Sutton Publishing. ISBN 0-7509-2281-8.
• Morgan, P (1995). Original Porsche 911. MBI Publishing. ISBN 1-901432-16-5
• Wood, J (1997). Porsche: The Legend. Parragon. ISBN 0-7525-2072-5.
• Raby, P (2005) "Porsche 911 Identification Guide". Herridge & Son. ISBN 0-9541063-8-5
• Wilkinson, Stephan (2005) "The Gold-Plated Porsche". The Lyons Press. ISBN 1-59228-792-1, rebuilding a 911.

External links

• Porsche 911 Carrera 3.0 Website and Registry Template:En icon
• Porsche 911S - restoration project Template:De icon
• Porsche 911 turbo - the first and second generation Template:En icon
• Radio List for Porsche (1974-1989)