Force: Difference between revisions
Line 191: | Line 191: | ||
where <math>\mu_{kf}</math> is the [[coefficient of kinetic friction]]. For most surface interfaces, the coefficient of kinetic friction is less than the coefficient of static friction. |
where <math>\mu_{kf}</math> is the [[coefficient of kinetic friction]]. For most surface interfaces, the coefficient of kinetic friction is less than the coefficient of static friction. |
||
<math><nowiki>Insert formula here</nowiki><nowiki>'''Insert non-formatted text here''''''''Bold text''''[Italic text][[[Link title][http://www.example.com link title]]]'''''</nowiki></math>===Fluid resistance=== |
|||
===Fluid resistance=== |
|||
[[Image:Terminal Velocity.png|thumb|150 px|When the drag force (<math>F_d</math>) associated with air resistance becomes equal in magnitude to the force of gravity on a falling object (<math>F_g</math>), the object reaches a state of [[#Dynamical equilibrium|dynamical equilibrium]] at [[terminal velocity]].]] |
[[Image:Terminal Velocity.png|thumb|150 px|When the drag force (<math>F_d</math>) associated with air resistance becomes equal in magnitude to the force of gravity on a falling object (<math>F_g</math>), the object reaches a state of [[#Dynamical equilibrium|dynamical equilibrium]] at [[terminal velocity]].]] |
||
{{main|drag (physics)}} |
{{main|drag (physics)}} |
Revision as of 12:40, 12 December 2007
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)
In physics, force is that which can cause a mass to accelerate. It may be experienced as a lift, a push, or a pull. The acceleration of the body is proportional to the vector sum of all forces acting on it (known as net force or resultant force). In an extended body, force may also cause rotation, deformation, or an increase in pressure for the body. Rotational effects are determined by the torques, while deformation and pressure are determined by the stresses that the forces create.[1]
Net force is mathematically equal to the time rate of change of the momentum of the body on which it acts.[2] Since momentum is a vector quantity (has both a magnitude and direction), force also is a vector quantity.
The concept of force has formed part of statics and dynamics since ancient times. Ancient contributions to statics culminated in the work of Archimedes in the 3rd century BC, which still forms part of modern physics. In contrast, Aristotle's dynamics incorporated intuitive misunderstandings of the role of force which were eventually corrected in the 17th century, culminating in the work of Isaac Newton. Following the development of quantum mechanics it is now understood that particles influence each another through fundamental interactions and therefore the standard model of particle physics demands that everything experienced fundamentally as a "force" is actually mediated by gauge bosons. Only four fundamental interactions are known: strong, electromagnetic, weak (unified into one electroweak interaction in 1970s), and gravitational (in order of decreasing strength).[1]
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/Aristoteles_Louvre2.jpg/150px-Aristoteles_Louvre2.jpg)
Aristotle and his followers believed that it was the natural state of massive objects on Earth (such as water and earth) to be motionless and that they tended towards that state if left alone. He distinguished between the innate tendency of objects to find their "natural place" (e.g. for heavy bodies to fall), which lead to "natural motion", and unnatural or forced motion, which required continued application of a force. But this theory, although based on the everyday experience of how objects move (e.g. constant application of a force to keep a cart moving), had severe trouble accounting for projectiles, such as the flight of arrows. Several theories were discussed over the centuries, and the late medieval idea that objects in forced motion carried an innate force of impetus was influential on the work of Galileo. Galileo constructed an experiment in which stones and cannonballs were both rolled down an incline to disprove the Aristotelian theory of motion early in the 17th century. He showed that the bodies were accelerated by gravity to an extent which was independent of their mass and argued that objects retain their velocity unless acted on by a force, for example friction.[1]
Isaac Newton is recognised as the person who argued explicitly for the first time that, in general, a constant force causes a constant rate of change (time derivative) of momentum. In essence, he gave the first (and the only) mathematical definition of the quantity force itself - as being the time-derivative of momentum: . Newton went on to publish his Principia Mathematica which used concepts of inertia, force, and conservation to describe the motion of all objects.
Newton has several laws. Newton's next contribution to force theory was to unify the motions of heavenly bodies (which were assumed by Aristotle to be in a natural state of constant motion) with motion on the Earth. He proposed a law of gravity that could account for the celestial motions that had been described earlier using Kepler's Laws of Planetary Motion. His model for the force of gravity was so powerful that it was used successfully to predict the existence of massive bodies such as Neptune before they were actually observed.
In 1784 Charles Coulomb discovered the inverse square law of interaction between electric charges using a torsion balance, which was the second fundamental force. The weak and strong forces were discovered in the 20th century through the development of nuclear physics.
With the development of quantum field theory and general relativity it was realized that “force” is a redundant concept arising from conservation of momentum (4-momentum in relativity and momentum of virtual particles in QED). Thus currently known fundamental forces are more accurately called “fundamental interactions”.
Describing forces
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c0/Freebodydiagram_PNBG.png/250px-Freebodydiagram_PNBG.png)
Since forces can be directly perceived as a push or pull, this can provide an intuitive framework for describing forces. As with other physical concepts (e.g. temperature), the intuitive notion is quantified using operational definitions that are consistent with direct perception, but are more precise. Historically, forces were first quantitatively investigated in conditions of static equilibrium where several forces canceled each other out. Such experiments prove the crucial properties that forces are additive vector quantities: they have magnitude and direction. When two forces act on an object, the resulting force, the resultant, is the vector sum of the original forces. This is called the principle of superposition. The magnitude of the resultant varies from the difference of the magnitudes of the two forces to their sum, depending on the angle between their lines of action. As with all vector addition this results in a parallelogram rule: the addition of two vectors represented by sides of a parallelogram, gives an equivalent resultant vector which is equal in magnitude and direction to the transversal of the parallelogram.[1]
Free-body diagrams can be used to provide a convenient way to keep track of forces acting on a system. Ideally, these diagrams are drawn with the angles and relative magnitudes of the force vectors preserved so that graphical vector addition can be done to determine the resultant.
As well as being added, forces can also be resolved into independent components at right angles to each other. For example, a horizontal force pointing northeast can be split into two forces, one pointing north, and one pointing east. Summing these component forces using vector addition yields the original force. Resolving force vectors into components of a set of basis vectors is often a more mathematically clean way to describe forces than using magnitudes and directions. This is because for orthogonal components, the components of the vector sum are uniquely determined by the scalar addition of the components of the individual vectors. In other words, orthogonal components are independent of each other: forces acting ninety degrees to each other have no effect on each other. Choosing a set of orthogonal basis vectors is often done by considering what set of basis vectors will make the mathematics most convenient. For example, in many cases choosing a basis vector that is directed in the direction of one of the forces is desirable since that force would then have only one non-zero component. Force vectors can also be three-dimensional, with the third component at right-angles to the two other components.[1]
Equilibrium occurs when the resultant force acting on an object is zero (that is, the vector sum of all forces is zero). There are two kinds of equilibrium: static equilibrium and dynamic equilibrium.
Static equilibrium
Static equilibrium was understood well before the invention of classical mechanics and states that objects which are at rest have a net zero resultant force acting on them.
The simplest case of static equilibrium occurs when two forces are equal in magnitude but opposite in direction. For example, any object on a level surface is pulled (attracted) downward toward the center of the Earth by the force of gravity. At the same time, surface forces resist the downward force with equal upward force (called the normal force) and result in the object having a non-zero weight. The situation is one of zero net force and no acceleration.
Pushing against an object on a frictional surface can result in a situation where the object does not move because the applied force is opposed by static friction, generated between the object and the table surface. For a situation with no movement, the static friction force exactly balances the applied force resulting in no acceleration. The static friction increases or decreases in response to the applied force up to an upper limit determined by the characteristics of the contact between the surface and the object.
A static equilibrium between two forces is the most usual way of measuring forces, using simple devices such as weighing scales and spring balances. For example, an object suspended on a vertical spring scale experiences the force of gravity acting on the object balanced by a force applied by the "spring reaction force" which is equal to the object's weight. Using such tools, several quantitative force laws were discovered: that the force of gravity is proportional to volume for objects of constant density (widely exploited for millennia to define standard weights); Archimedes' principle for buoyancy; Archimedes' analysis of the lever; Boyle's law for gas pressure; and Hooke's law for springs. All these were all formulated and experimentally verified before Isaac Newton expounded his three laws of motion.[1]
Dynamical equilibrium
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/cc/Galileo.arp.300pix.jpg/150px-Galileo.arp.300pix.jpg)
Dynamical equilibrium was first described by Galileo who noticed that certain assumptions of Aristotlean physics were contradicted by observations and logic. Galileo realized that simple velocity addition demands that the concept of an "absolute rest frame" did not exist. Galileo concluded that motion in a constant velocity was completely equivalent to rest. This was contrary to Aristotle's notion of a "natural state" of rest that all massive objects naturally approached. Simple experiments showed that Galileo's understanding of the equivalence of constant velocity and rest to be correct. For example, if a mariner dropped a cannonball from the crow's nest of a ship moving at a constant velocity, Aristotlean physics would have the cannonball fall straight down while the ship moved underneath it. Thus, in an Aristotlean universe, the falling cannonball would land behind the foot of the mast of a moving ship. However, when this experiment is actually conducted, the cannonball always falls at the foot of the mast, as if the cannonball knows to travel with the ship despite being separated from it. Since there is no forward horizontal force being applied on the cannonball as it falls, the only conclusion left is that the cannonball continues to move with the same velocity as the boat as it falls. Thus, no force is required to keep the cannonball moving at the constant forward velocity.[1]
Moreover, any object traveling at a constant velocity must be subject to a net zero resultant force. This is the definition of dynamical equilibrium where all the forces on an object balance but there is still constant velocity motion.
A simple case of dynamical equilibrium occurs in constant velocity motion across a surface with kinetic friction. In such a situation, a force is applied in the direction of motion while the kinetic friction force exactly opposes the applied force. This results in a net zero force, but since the object started with a non-zero velocity, it continues to move with a non-zero velocity. Aristotle misinterpreted this motion as being caused by the applied force. However, when kinetic friction is taken into consideration it is clear that there is no force causing constant velocity motion.[1]
Newtonian definitions
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/39/GodfreyKneller-IsaacNewton-1689.jpg/150px-GodfreyKneller-IsaacNewton-1689.jpg)
In Principia Mathematica Newton set out three laws of motion which have direct relevance to the way forces are described in physics
Newton's first law
Newton's first law of motion sets forth the conditions required for equilibrium and effectively defines the inertia that can be related to the mass of an object. Taking the Aristotlean idea of "natural states", the condition of constant velocity whether it be zero or nonzero is now considered the "natural state" of all massive objects. Objects will continue to move in a state of constant velocity unless acted upon by an unbalanced external force.
Newton's second law
Force is often defined using Newton's second law, as the product of mass times acceleration :
Sometimes called the "second most famous formula in physics", Newton, in fact, never stated explicitly the F=ma formula for which he is often credited. Newton's second law is described in his Principia Mathematica as
where is the momentum of the system.
The use of Newton's second law in either of these forms as a definition of force is generally disparaged in more rigorous textbooks,[1] because this removes all empirical content from the law. In fact, the in this equation represents the net (vector sum) force; in equilibrium this is zero by definition, but (balanced) forces are present nevertheless. Instead, Newton's law is meaningful because it asserts the proportionality of two quantities which can be defined without reference to it. Thus, the intuitive Aristotelian belief that a net force is required to keep an object moving with constant velocity (therefore zero acceleration) is objectively wrong and not just a consequence of a poor choice definition. With rather more justification, Newton's second law can be taken as a quantitative definition of mass by writing the law as an equality, the relative units of force and mass are fixed.
Given the empirical success of Newton's law, it is sometimes used to measure the strength of forces (for instance, using astronomical orbits to determine gravitational forces). Nevertheless, the force and the quantities used to measure it remain distinct concepts.
The definition of force is sometimes regarded as problematic, since it must either ultimately be referred to our intuitive understanding of our direct perceptions, or be defined implicitly through a set of self-consistent mathematical formulae. Notable physicists, philosophers and mathematicians who have sought a more explicit definition include Ernst Mach, Clifford Truesdell and Walter Noll.[3]
Newton's third law
Newton's third law is a result of applying symmetry to situations where forces can be attributed to the presence of different objects. For any two objects (call them 1 and 2), Newton's third law states that
This law implies that forces always occur in action-reaction pairs. Any force that is applied to object 1 due to the action of object 2 is automatically accompanied by a force applied to object 2 due to the action of object 1. If object 1 and object 2 are considered to be in the same system, then the net force on the system due to the interactions between objects 1 and 2 is zero since
- .
This means that systems cannot create internal forces that are unbalanced. However, if objects 1 and 2 are considered to be in separate systems, then the two systems will each experience an unbalanced force and accelerate with respect to each other according to Newton's second law.[1]
Combining Newton's second and third laws, it is possible to show that the linear momentum of a system is conserved. Using
and integrating over time, the equation:
is obtained. For a system which includes objects 1 and 2,
which is the conservation of linear momentum. Generalizing this to a system of an arbitrary number of particles is straightforward. This shows that exchanging momentum between constituent objects will not affect the net momentum of a system. In general, as long as all forces are due to the interaction of massive objects, it is possible to define a system such that net momentum is never lost nor gained.[1]
Fundamental force models
Although there are apparently many types of forces in the Universe, they are all based on four fundamental forces. The strong and weak forces only act at very short distances and are responsible for holding certain nucleons and compound nuclei together. The electromagnetic force acts between electric charges and the gravitational force acts between masses. All other forces are based on the existence of the four fundamental interactions. For example, friction is a manifestation of the electromagnetic force acting between the atoms of two surfaces, and the Pauli exclusion principle, which does not allow atoms to pass through each other. The forces in springs modeled by Hooke's law are also the result of electromagnetic forces and the exclusion principle acting together to return the object to its equilibrium position. Centrifugal forces are acceleration forces which arise simply from the acceleration of rotating frames of reference.[1]
The modern quantum mechanical view of the first three fundamental forces (all except gravity) is that particles of matter (fermions) do not directly interact with each other but rather by exchange of virtual particles (bosons). This exchange results in what we call electromagnetic interaction (Coulomb force is one example of electromagnetic interaction).
It is a common misconception to ascribe the repulsion of like charges under the influence of the electromagnetic force to the stiffness and rigidity of solid matter. However, these characteristics are actually a result of the Pauli exclusion principle. Since electrons are fermions, they are forbidden by the rules of quantum mechanics from occupying the same quantum mechanical state as other electrons. This means that two electrons of the same quantum numbers cannot share the same atomic orbital, so when two electrons are brought in close proximity they simply cannot at any point occupy the volume of space already occupied by other electrons. The more densely compact the electrons in the material are, the more difficult it is to find allowable states for other electrons to inhabit. While this effect is manifested macroscopically as a structural "force", it is technically only the result of the existence of a finite ensemble of electron orbitals rather than being dependent directly on, for example, the electromagnetic force. All the electromagnetic force does is mediate the particular distribution and variety of the orbitals for the collection of atoms. Even if the electromagnetic force did not exist, fermions would still be excluded from occupying the same state. Such degeneracy pressure forces can only be overcome when there is enough energy in the system so that other fundamental interactions between the particles can take precedence (for example, electrons and protons interacting via the weak nuclear force to become neutrons). However, this kind of event only occurs in very extreme circumstances such as particle accelerators or neutron stars.[1]
Gravity
What we now call gravity was not identified as a universal force until the work of Isaac Newton. Before Newton, the tendency for objects to fall towards the Earth was not understood as related to the motions of celestial objects. Galileo was instrumental in describing the characteristics of falling objects by determining that the acceleration of every body in free-fall was constant and independent of the mass of the object. Today, this acceleration due to gravity at the surface of the Earth is usually designated as and has a value of 9.81 meters per second squared which varies slightly depending on location and points toward the center of the Earth. This observation means that the force of gravity on an object at the Earth's surface is directly proportional to the object's mass. Thus an object that has a mass, will experience a force
In free-fall, this force is unopposed and therefore the net force on the object is the force of gravity. For objects not in free-fall, the force of gravity is opposed by the weight of the object. For example, a person standing on the ground experiences zero net force since the force of gravity is canceled by the weight of the person that is manifested by a normal force exerted on the person by the ground.[1]
Newton came to realize that the acceleration due to gravity at the surface of the Earth would manifest in different ways at larger distances. In particular, Newton determined that the acceleration of the moon around the Earth could be ascribed to the same force of gravity if the acceleration due to gravity decreased as an inverse square law. Further, Newton realized that the mass of the gravitating object directly affected the acceleration due to gravity. Combining these ideas gives a formula that relates the mass of the Earth (), the radius of the Earth () to the acceleration due to gravity:
where the vector direction is given by which is the unit vector directed outward from the center of the Earth.
In this equation, a dimensional constant is used to describe the relative strength of gravity. This constant has come to be known as Newton's Universal Gravitation Constant, though it was of an unknown value in Newton's lifetime. It was not until 1798 that Henry Cavendish was able to make the first measurement of the constant using a torsion balance which was widely reported in the press as a measurement of the mass of the Earth due to the fact that knowing the constant could allow one to solve for the Earth's mass given the above equation. Newton, however, realized that since all celestial bodies followed the same laws of motion, his law of gravity had to be universal. Succinctly stated, Newton's Law of Gravitation between two massive bodies is
where is the mass of first object and is the mass of the second object.
This formula was powerful enough to stand as the basis for all subsequent descriptions of motion within the solar system until the twentieth century. During that time, sophisticated methods of perturbation analysis were invented to calculate the deviations of orbits due to the influence of multiple bodies on a planet, moon, comet, or asteroid. These techniques are so powerful that they can be used to predict precisely the motion of celestial bodies to an arbitrary precision at any length of time in the future. The formalism was exact enough to allow mathematicians to predict the existence of the planet Neptune before it was observed.[1]
It was only in the orbit of the planet Mercury where Newton's Law of Gravitation seemed to not fully explain the orbit. Some astrophysicists predicted the existence of another planet (Vulcan) that would explain the discrepancies, but despite some early indications, no such planet could be found to exist. When Albert Einstein finally formulated his theory of general relativity (GR) he turned his attention to the problem of Mercury's orbit and found that his theory added a correction which could account for the discrepancy. This was the first instance where Newton's Theory of Gravity had been shown to be incorrect in favor of an alternative.
Since then, general relativity has been acknowledged as the theory which currently explains gravity the best. In GR, interestingly gravitation is not viewed as a force, but rather, objects moving freely in gravitational fields travel under their own inertia in straight lines through curved space-time - defined as the shortest space-time path between two space-time events. From the perspective of the object, all motion occurs as if there were no gravitation whatsoever. It is only when observing the motion in a global sense that the curvature of spacetime can be observed and the force is inferred from the object's apparently curved path. Thus, the straight line path in space-time is seen as a curved line in space, and it is called the ballistic trajectory of the object. For example, a basketball thrown from the ground moves in a parabola shape as it is in a uniform gravitational field. Its space-time trajectory (when the extra ct dimension is added) is almost a straight line, slightly curved (with the radius of curvature of the order of few light-years). The time derivative of the changing momentum of the body is what we label as "gravitational force".[1]
Electromagnetic forces
The electrostatic force was first described in 1784 by Coulomb as a force which existed intrinsically between two charges. The properties of the electrostatic force were that it varied as an inverse square law directed in the radial direction, was both attractive and repulsive (there was intrinsic polarity), was independent of the mass of the charged objects, and followed the law of superposition. Unifying all these observations into one succinct statement became known as Coulomb's Law.[1]
As the mathematical formalism for Coulomb's Law, physicists of the eighteenth and nineteenth century became interested in the electric field which could be used to determine the electrostatic force on an electric charge at any point in space. Knowing the magnitude of the electric field automatically gave the information required to know what the force applied on a given electric charge would be.[1]
Developing in parallel to electrostatic force was the Lorentz force of magnetism. This force can be described as a force that exists between two electric currents. It has the same mathematical character as Coulomb's Law with the proviso that like currents attract and unlike currents repel. Similar to the electric field, the magnetic field can be defined which can be used to determine the magnetic force on an electric current at any point in space. Combining the definition of electric current as the time rate of change of electric charge yields a law of vector multiplication called Lorentz's Law which determines the force on a moving charge provided with an electric field.[1]
Thus a full theory of the electromagnetic force on a charge can be written as a sum of the electrostatic force (due to the electric field) and the magnetic force (due to the magnetic field). Fully stated, this is the law:
where is the magnitude of the electromagnetic force, is the magnitude of the charge of the particle, is the velocity of the particle, is the electric field, and is the magnetic field.
The origin of electric and magnetic fields would not be fully explained until 1864 when James Clerk Maxwell finally unified a number of earlier theories into a succinct set of four equations that fully described the sources of the fields as due to stationary and moving charges as well as the interactions of the fields themselves. This led Maxwell to discover that electric and magnetic fields could be "self-generating" through a wave that traveled at a speed which he calculated to be the speed of light. This insight united the nascent fields of electromagnetic theory with optics and led directly to a complete description of the electromagnetic spectrum.[1]
However, attempting to reconcile electromagnetic theory two observations, the photoelectric effect and the ultraviolet catastrophe, proved troublesome. Through the work of leading theoretical physicists, a new theory of electromagnetism was developed using quantum mechanics. This final modification to electromagnetic theory would lead ultimately to quantum electrodynamics, which fully describes all electromagnetic phenomena as being mediated by waveparticles known as photons. In QED, photons are the fundamental exchange particle which described all interactions relating to electromagnetism including the electromagnetic force.
Nuclear forces
There are two "nuclear forces" which today are usually described as interactions that take place in quantum theories of particle physics. The strong nuclear force is the force responsible for the structural integrity of atomic nuclei while the weak nuclear force is responsible for the decay of certain nucleons into leptons and other types of hadrons.[1]
The strong force is today understood to represent the interactions between quarks and gluons as detailed by the theory of quantum chromodynamics (QCD). The strong force is the fundamental force mediated by gluons, acting upon quarks, antiquarks, and the gluons themselves. Of the four fundamental forces, the strong interaction is the most powerful.
The strong force only acts directly upon elementary particles. However, a residual of the force is observed between hadrons (the best known example being the force that acts between nucleons in atomic nuclei) as the nuclear force. Here the strong force acts indirectly, transmitted as gluons which form part of the virtual pi and rho mesons which classically transmit the nuclear force (see this topic for more). As has been shown by many failed free quark searches, the elementary particles affected are unobservable directly. This phenomenon is called confinement, a theory which allows only hadrons to be seen.
The weak force is due to the exchange of the heavy W and Z bosons. Its most familiar effect is beta decay (of neutrons in atomic nuclei) and the associated radioactivity. The word "weak" derives from the fact that the field strength is some 1013 times less than that of the strong force. Still, it is stronger than gravity over short distances. A consistent electroweak theory has also been developed which shows that electromagnetic forces and the weak force are indistinguishable at a temperatures in excess of approximately 1015 Kelvin. Such temperatures have been probed in modern particle accelerators and show the conditions of the universe in the early moments of the Big Bang.
Non-fundamental force models
Some forces are modeled by making simplifying assumptions about the physical conditions. In such situations, idealized models can be utilized to gain physical insight.
Normal force
The normal force is the surface force which acts normal to the surface interface between two objects. The normal force, for example, is responsible for the structural integrity of tables and floors as well as being the force that responds whenever an external force pushes on a solid object.[1]
Friction
Friction is a surface force that opposes motion. The frictional force is directly related to the normal force which acts in order to keep two solid objects separated at the point of contact. There are two broad classifications of frictional forces: static friction and kinetic friction.[1]
The static friction force () will exactly oppose forces applied to a body parallel to a surface contact up to the limit specified by the coefficient of static friction () multiplied by the normal force (). In other words the magnitude of the static friction force satisfies the inequality:
The kinetic friction force () is independent of both the forces applied and the movement of the object. Thus, the magnitude of the force is equal to
where is the coefficient of kinetic friction. For most surface interfaces, the coefficient of kinetic friction is less than the coefficient of static friction.
===Fluid resistance===
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d2/Terminal_Velocity.png/150px-Terminal_Velocity.png)
Fluid resistance is a body force that resists the motion of an object through a fluid due to viscosity. For so-called "Stokes drag" the force is approximately proportional to the velocity, but opposite in direction:
where:
- is a constant that depends on the properties of the fluid and the dimensions of the object (usually the cross-sectional area), and
- is the velocity of the object.[1]
Pressure differential
When fluid flows, differences in pressure result in forces being directed along the pressure gradients as follows:
where is the volume of the object in the fluid and is the scalar function that describes the pressure at all locations in space. Pressure gradients and differentials result in the buoyant force for fluids suspended in gravitational fields, winds in atmospheric science, and the lift associated with aerodynamics and flight.[1]
Tension
Tension forces can be idealized using ideal strings which are massless, frictionless, unbreakable, and unstretchable. They can be combined with ideal pulleys which are essentially devices that can allow for ideal strings to switch physical direction. Ideal strings transmit tension forces instantaneously in action-reaction pairs so that if two objects are connected by an ideal string, any force directed along the string by the first object is accompanied by a force directed along the string in the opposite direction by the second object. By connecting the same string multiple times to the same object, the tension force can be multiplied. In order to do this, a system of pulleys must be employed. While such set-ups allow for an increase in force the corresponding increase in distance associated with the greater length of string conserves energy as all simple machines must.[1]
Hooke's Law
Ideal springs that are massless, frictionless, unbreakable, and infinitely stretchable can be used to model elastic forces. Such springs exert forces that push when contracted or pull when extended in proportion to the displacement of the spring from its equilibrium size. If is the displacement, the force exerted by the spring is equal to:
where is the Hooke's Law constant that is different for every spring.[1]
Centripetal force
For an object accelerating in circular motion, the unbalanced force acting on the object is equal to
where is the mass of the object, is the velocity of the object and is the distance to the center of the circular path and is the unit vector pointing in the radial direction outwards from the center. This means that the unbalanced centripetal force felt by any object is always directed toward the center of the curving path. Such forces act perpendicular to the velocity vector associated with the motion of an object and therefore do not change the speed of the object (magnitude of the velocity) but only the direction of the velocity vector. Resolving the unbalanced force that accelerates an object into a component that is perpendicular to the path and tangential to the path yields the tangential force which accelerates the object by either slowing it down or speeding it up and the radial (centripetal) force which changes its direction.[1]
Fictitious forces
There are also a number of forces which are frame dependent, meaning that they appear due to the adoption of non-Newtonian (that is, non-inertial) reference frames. Such forces include the centrifugal force and the Coriolis force. These forces are considered fictitious because in frames of reference that are not accelerating, these forces do not strictly exist.[1]
Force and potential
Instead of a force, the mathematically equivalent concept of a potential energy field can be used for convenience. For instance, the gravitational force acting upon a body can be seen as the action of the gravitational field that is present at the body's location. Restating mathematically the definition of energy (via definition of work), a potential scalar field is defined as that field whose gradient is equal and opposite to the force produced at every point:
Forces can be classified as conservative or nonconservative. Conservative forces are equivalent to the gradient of a potential.[1]
Conservative forces
A conservative force that acts on a closed system has an associated mechanical work that allows energy to convert only between kinetic or potential forms. This means that for a closed system, the net mechanical energy is conserved whenever a conservative force acts on the system. The force, therefore, is related directly to the difference in potential energy between two different locations in space and can be considered to be an artifact of the potential field in the same way that the direction and amount of a flow of water can be considered to be an artifact of the contour map of the elevation of an area.[1]
Conservative forces include gravity, the electromagnetic force, and the spring force. Each of these forces, therefore, have models which are dependent on a position often given as a radial vector eminating from spherically symmetric potentials. Examples of this follow:
For gravity:
where is the gravitational constant, is the mass of object n.
For electrostatic forces:
where is electric permittivity of free space, is the electric charge of object n.
For spring forces:
where is the spring constant.[1]
Nonconservative forces
For certain physical scenarios, it is impossible to model forces as being due to gradient of potentials. This is often due to macrophysical considerations which yield forces as arising from a macroscopic statistical average of microstates. For example, friction is caused by the gradients of numerous electrostatic potentials between the atoms, but manifests as a force model which is independent of any macroscale position vector. Nonconservative forces other than friction include other contact forces, tension, compression, and drag. However, for any sufficiently detailed description, all these forces are the results of conservative ones since each of these macroscopic forces are the net results of the gradients of microscopic potentials.[1]
The connection between macroscopic non-conservative forces and microscopic conservative forces is described by detailed treatment with statistical mechanics. In macroscopic closed systems, nonconservative forces act to change the internal energies of the system and are often associated with the transfer of heat. According to the Second Law of Thermodynamics, nonconservative forces necessarily result in energy transformations within closed systems from ordered to more random conditions as entropy increases.[1]
Units of measurement
The SI unit used to measure force is the newton (symbol N), which is equivalent to kg·m·s−2. The CGS unit is the dyne. In Imperial engineering units, if F is measured in "pounds force" or "lbf", and a in feet per second squared, then m must be measured in slugs. Similarly, if mass is measured in pounds mass, and a in feet per second squared, the force must be measured in poundals. The units of slugs and poundals are specifically designed to avoid a constant of proportionality in this equation.
When the standard g (an acceleration of 9.80665 m/s²) is used to define pounds force, the mass in pounds is numerically equal to the weight in pounds force. However, even at sea level on Earth, the actual acceleration of free fall is quite variable, over 0.53% more at the poles than at the equator. Thus, a mass of 1.0000 lb at sea level at the equator exerts a force due to gravity of 0.9973 lbf, whereas a mass of 1.000 lb at sea level at the poles exerts a force due to gravity of 1.0026 lbf. The normal average sea level acceleration on Earth (World Gravity Formula 1980) is 9.79764 m/s², so on average at sea level on Earth, 1.0000 lb will exerts a force of 0.9991 lbf.
The equivalence 1 lb = 0.453 592 37 kg is always true, by definition, anywhere in the universe. If you use the standard g which is official for defining kilograms force to define pounds force as well, then the same relationship will hold between pounds-force and kilograms-force (an old non-SI unit is still used). If a different value is used to define pounds force, then the relationship to kilograms force will be slightly different—but in any case, that relationship is also a constant anywhere in the universe. What is not constant throughout the universe is the amount of force in terms of pounds-force (or any other force units) which 1 lb will exert due to gravity.
By analogy with the slug, there is a rarely used unit of mass called the "metric slug". This is the mass that accelerates at one metre per second squared when pushed by a force of one kgf. In 1901, the CGPM improved the definition of the kilogram-force, adopting a standard acceleration of gravity for the purpose, and making the kilogram-force equal to the force exerted by a mass of 1 kg when accelerated by 9.80665 m/s². An item with a mass of 10 kg has a mass of 1.01972661 metric slugs (= 10 kg divided by 9.80665 kg per metric slug). This unit is also known by various other names such as the hyl, TME (from a German acronym), and mug (from metric slug).The kilogram-force is not a part of the modern SI system, but is still used in applications such as:
- Thrust of jet and rocket engines
- Spoke tension of bicycles
- Draw weight of bows
- Torque wrenches in units such as "meter kilograms" or "kilogram centimetres" (the kilograms are rarely identified as units of force)
- Engine torque output (kgf·m expressed in various word orders, spellings, and symbols)
- Pressure gauges in "kg/cm²" or "kgf/cm²"
Another unit of force called the poundal (pdl) is defined as the force that accelerates 1 lbm at 1 foot per second squared. Given that 1 lbf = 32.174 lb times one foot per second squared, we have 1 lbf = 32.174 pdl.
In colloquial, non-scientific usage, the "kilograms" used for "weight" are almost always the proper SI units for this purpose. They are units of mass, not units of force.
The symbol "kgm" for kilograms is also sometimes encountered. This might occasionally be an attempt to distinguish kilograms as units of mass from the "kgf" symbol for the units of force. It might also be used as a symbol for those obsolete torque units (kilogram-force metres) mentioned above, used without properly separating the units for kilogram and metre with either a space or a centered dot.
Conversions
Below are several conversion factors between various measurements of force:
- 1 dyne = 10-5 newtons
- 1 kgf (kilopond kp) = 9.80665 newtons
- 1 metric slug = 9.80665 kg
- 1 lbf = 32.174 poundals
- 1 slug = 32.174 lb
- 1 kgf = 2.2046 lbf cvt
Force in special relativity
In the special theory of relativity mass and energy are equivalent (as can be seen by calculating the work required to accelerate a body). When an object's velocity increases so does its energy and hence its mass equivalent (inertia). It thus requires a greater force to accelerate it the same amount than it did at a lower velocity. The definition remains valid. But in order to be conserved, momentum must be redefined as:
where
- is the velocity and
- is the speed of light.
The relativistic expression relating force and acceleration for a particle with non-zero rest mass moving in the direction is:
where the Lorentz factor
Here a constant force does not produce a constant acceleration, but an ever decreasing acceleration as the object approaches the speed of light. Note that is undefined for an object with a non zero rest mass at the speed of light, and the theory yields no prediction at that speed.
One can however restore the form of
for use in relativity through the use of four-vectors. This relation is correct in relativity when is the four-force, m is the invariant mass, and is the four-acceleration.[1]
References
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai e.g. Feynman, R. P., Leighton, R. B., Sands, M. (1963). Lectures on Physics, Vol 1. Addison-Wesley.
{{cite book}}
: CS1 maint: multiple names: authors list (link); Kleppner, D., Kolenkow, R. J. (1973). An introduction to mechanics. McGraw-Hill.{{cite book}}
: CS1 maint: multiple names: authors list (link); Young, H.D., Freedman, R.A. (2004). Sears & Zemansky's University Physics. Pearson Addison-Wesley.{{cite book}}
: CS1 maint: multiple names: authors list (link). - ^ See for example pages 9-1 and 9-2 of Feynman, Leighton and Sands (1963).
- ^ e.g. W. Noll, “On the Concept of Force”, in part B of Walter Noll's website..
- Parker, Sybil (1993). Encyclopedia of Physics, p 443,. Ohio: McGraw-Hill. ISBN 0-07-051400-3.
- Corbell, H.C. (1994). Classical Mechanics p 28,. New York: Dover publications. ISBN 0-486-68063-0.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Halliday, David (2001). Physics v. 1. New York: John Wiley & Sons. ISBN 0-471-32057-9.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Serway, Raymond A. (2003). Physics for Scientists and Engineers. Philadelphia: Saunders College Publishing. ISBN 0-534-40842-7.
- Tipler, Paul (2004). Physics for Scientists and Engineers: Mechanics, Oscillations and Waves, Thermodynamics (5th ed. ed.). W. H. Freeman. ISBN 0-7167-0809-4.
{{cite book}}
:|edition=
has extra text (help) - Verma, H.C. (2004). Concepts of Physics Vol 1 (2004 Reprint ed.). Bharti Bhavan. ISBN 81-7709-187-5.