Unicycle

A Torker unicycle

A unicycle is a one-wheeled human-powered vehicle. Unicycles are similar to, but less complex than, bicycles.

History

One theory of the advent of the unicycle is based on the popularity of the penny-farthing (or "Ordinary") during the late 19th century. Since the pedal and cranks were connected directly to the front axle, the rear wheel would go up in the air and the rider would be moved slightly forward. Many penny-farthing owners discovered they could dispense with the frame and just ride the front wheel and handlebars. Evidence for this theory of development can reportedly be found in pictures from the late 19th century showing unicycles with large wheels.

Over the years, unicycle enthusiasts have inspired manufacturers to create new designs, such as seatless ("ultimate wheel") and tall ("giraffe") unicycles. During the late 1980s some extreme sportsmen took an interest in the unicycle and off-road unicycling (MUni) was born.

Construction

Unicycles are composed of a few key parts: the wheel (which includes the tire, tube, rim, spokes, hub and axle), the cranks, pedals, fork-style frame, seatpost, and saddle (the seat of the unicycle). The wheel is usually similar to a bicycle wheel with a special hub designed so the axle is a fixed part of the hub. This means the rotation of the cranks directly controls the rotation of the wheel (called direct drive). The frame sits on top of the axle bearings, while the cranks attach to the ends of the axle. The seatpost links the frame to the saddle.

There are many different types of unicycles, which can include (but are not limited to): freestyle unicycles, trial unicycles, MUnis, giraffes, and long distance unicycles, which all have special components unique to that type of unicycle.

Training aids

Having props, or training aids may make it easier to become comfortable with riding a unicycle. Two round wooden poles an inch or two in diameter and up to 4 feet (1.2 m) long can be used as training poles to stay stable. Another method for training is using a spotter to make riding easier. One other easy way to learn is to find a narrow hallway with which to use to help alleviate your left and right balancing while allowing you to focus on your forward and backward balance.

Types of unicycles

Freestyle unicycle

Generally used for flatland skills and routines. Usually has a relatively high seatpost, a narrow saddle, a squared fork (used for one-footed tricks), and cotter-less cranks, as they do not need to withstand very much pressure. These unicycles are used similarly to flatland bicycles. Some examples of freestyle unicycles include Miyata, Nimbus, Schwinn, and Semcycle brands. Prices typically range from US$100 to $300. Wheel size is usually 20 inches (510 mm), but smaller riders may use 16-inch (410 mm) unicycles. Some people prefer 24-inch (610 mm) wheels.

Trials unicycle

Designed for unicycle trials, trials unicycles are stronger than standard unicycles in order to withstand the stresses caused by jumping, dropping, and supporting the weight of the unicycle and rider on components such as the pedals and cranks. A recent development in trials unicycles is splined cranks and hubs, a feature that is very useful and somewhat expensive. Many trials unicycles also have wide, 19- or 20-inch (510 mm) knobby tires to absorb some of the impact on drops.

Offroad unicycle ("muni")

"MUni" or "muni" is an abbreviation for mountain unicycling. MUnis have many of the same components as trials unicycles, but have a few key differences. Usually, the tire diameters on mountain unicycles are either 24 or 26 inches (660 mm), allowing the rider to more easily roll over obstacles such as roots and rocks. The seat is also thicker and more comfortable on MUnis to compensate for the rough terrain. Brakes are sometimes used for steep descents.

Touring unicycle

Used for long distances, these unicycles are specially made to cover distances. They have a large wheel diameter, between 26 and 36 in., so more distance is covered in less pedal rotation. A 36" unicycle made by the Coker Tire company started the big wheel trend. Some variations on the traditional touring unicycle include the Schlumpf "GUni" (geared unicycle), which uses a two-speed internal fixed-geared hub. Larger direct-drive wheels tend to have shorter cranks to allow for easier cadence and more speed. Geared wheels, with an effective diameter larger than the wheel itself, tend to use longer cranks for control, as the speed comes from the gear ratio, not the wheel itself.

Variations

A unicycle hub

• Giraffe: a chain driven unicycle, usually very tall (but includes multi-wheel unicycles).
• Geared unicycle ("GUni"): a unicycle whose wheel rotates faster than the pedal cadence. Used for distance riding and racing.
• Multi-wheeled unicycle: A unicycle with more than one wheel, stacked on top of each other so that only one touches the ground (nicknamed stacks). The wheels are linked together by chains or direct contact with each other.
• Kangaroo unicycle: unicycle that has both the cranks facing in the same direction. They are so named due to the hopping motion of the rider's legs, supposedly resembling the jumping of a kangaroo.
• Eccentric unicycle: unicycle that has the hub off-center in the wheel. Putting an ecentric wheel on a Kangaroo unicycle can make riding easier, and the rider's motion appear more kangaroo-like.
• Ultimate wheel: a unicycle with no frame or seat, just a wheel and pedals.
• Impossible wheel (BC wheel) : a wheel with pegs or metal plates connected to the axle for the rider to stand on. These wheels are for coasting and jumping. A purist form of unicycling. There are no cranks.
• Monocycle (or monowheel): a large wheel inside which the rider sits (as in a hamster wheel), either motorized or pedal-powered. The greater gyroscopic properties and lower center of mass make it easier to balance than a normal unicycle but less maneuverable.
• Eunicycle: a computer-controlled, motor-driven, self-balancing unicycle.
• Freewheeling unicycle: a unicycle in which the hub freewheels, allowing the rider to coast or move forward without pedaling, as a bike would. These unicycles almost always have brakes because they cannot stop the way traditional unicycles do. These unicycles also cannot go backwards.
• Other variations include tandem, recumbent, hydraulic giraffe, unibike, suicycle, and motorized unicycle.[1]

Theory

A unicycle is a form of inverted pendulum. It is also a nonholonomic system because its outcome is path-dependent. Balancing a robotic unicycle or a Eunicycle forms an interesting problem in control theory. (See Segway.)

Rider height vs. wheel diameter

Rider Inseam	Wheel Size
23" or less	16"
24-26"	20"
27-33"	24"
33" or more	26"

Speed

The pedals of a typical unicycle (e.g. not a giraffe or guni) are connected directly to the wheel. This means that there are no gears to shift and provides a very direct feel of the wheel contact with the ground. It also means that wheel size is a major factor in unicycle speeds:

Wheel size	Avg	High
20"	4 mph (6.4 km/h)	8 mph (13 km/h)
24"	5 mph (8.0 km/h)	10 mph (16 km/h)
29"	7 mph (11 km/h)	14 mph (23 km/h)
36"	11 mph (18 km/h)	22 mph (35 km/h)

Riding

File:Sex Change.jpg

Alex Toms of Sydney, Australia demonstrates street unicycling (March, 2006).

Traditionally, unicycling has been connected with parades or the circus. This is because the unicycle requires a great degree of skill to ride, and watching a unicyclist can be entertaining. Recent developments in the strength and durability of bicycle (and consequently unicycle) parts have given rise to many riding styles such as trials unicycling and mountain unicycling. Unicycling has therefore developed from primarily an entertainment activity to a competitive sport and recreation.

Riding styles

Neighborhood

For basic unicycling, this is the place to be. Not too long ago, all mass-produced unicycles were in this category. Basic, cheap unicycles such as the Torker CX are used.

Freestyle unicycling

"Freestyle" means to do skills, stunts, or tricks. Not only is freestyle a well-known term in BMX bicycling, it is also the name for a competition event in unicycling.

Trials unicycling

Trials unicycling is specifically aimed at hopping and riding over obstacles. Because of the constant pounding a trials unicycle endures, it must have a very strong axle and crankset.

Street unicycling

Street unicycling (or simply "street", as it's known within the sport) is a style of unicycling where riders use combinations of objects found in urbanized settings, such as curbs, ledges, handrails, stairs as well as flat areas to perform a wide variety of tricks.

Off-road or mountain unicycling (MUni)

Unicycling on rough terrain has been the swiftest growing form of unicycling in recent years. Any place a mountain bike can go, a mountain unicycle can go as well — and sometimes more easily, due to the unicycle's greater maneuverability.

Touring or commuting

This style is meant for distance riding. With a 29-inch (740 mm) or 36-inch (910 mm) wheel cruising speeds of 10 to 15 mph (24 km/h) can easily be reached. However, the smallest wheel diameter to fit within the "touring" category is 26 inches (660 mm).

Extreme unicycling

Jess Riegel shows an example of grinding, a street unicycling skill

Recently, unicycling has gained popularity as a sport, and as a general means of transport. In the last 10 years, unicyclists have taken unicycles out of the traditional parade, gym, or circus setting and have created new forms of unicycling. These forms can be described broadly as "extreme unicycling":

Street unicycling

Invented by Dan Heaton in 1999, street is a form of riding that combines freestyle and trials. The basic street moves include crankflips, unispins, twists and varials. After these skills have been mastered, the object is to learn variations and take the these moves up or over or down obstacles. Generally, street is ridden on a 20" trials unicycle with some modifications.

Major contributors have been such names as Mike Clark (invented the crankflip, current record holder for longest handrail grind), Brian Lundgren (invented the backflip), and Shaun Johanneson.

Flatland

Flatland is a relatively new form of unicycling derived from a combination of street and freestyle riding. By definition it follows the same rules as freestyle: to do various trick and move on flat ground. Flatland, however, has a distinctly urban flair to it. It is often ridden in such a way as to combine many moves into a single combination or line. It's creation can be traced back to Dan Heaton, who began focusing on lower impact riding after breaking both of his ankles in a unicycling accident. Recently, riders such as Spencer Hochberg (Bedford Unicycles) and Xavier Collos (Koxx-One) have been making huge advances in this particular form of riding. Flatland is also typically ridden on a 20" trials unicycle with some modifications.

Unicycle trials

Trials is a form of unicycling that has been based on bicycle trials, and before that motorcycle trials. The object is to ride or hop over obstacles without putting a foot or hand down (known as "dabbing"). Trials can be ridden in an urban or natural environment, and each offers its own set of challenges and possibilities. A trials unicycle is traditionally a 20" wheeled ride with a 19" rim in order to fit a 2.5" trials tire.

Mountain unicycling

Also known as MUni, Mountain Unicycling was created sometime back in the late 1980s. It is not known who the originator was, but Kris Holm is without a doubt the biggest innovator and contributor. MUni can take many forms, most of which follow the various styles of mountain biking. There is Cross Country which involves riding long distances off road, and there is Down Hill riding which is all about riding the most treacherous off road stretches one can find. In addition, Shore riding is very popular, which is the unicycling version of British Columbia's North Shore mountain biking style which is based around riding on wooden ladders and logs through a natural environment. A traditional MUni is a 24" wheeled beast with a 2.5-3" aggressive tire.

Freestyle

Perhaps the oldest form of extreme unicycling. Traditional freestyle riding is based around performance. Freestyle tricks and moves are derived from different ways of riding the unicycle, and linking these moves together into one long flowing line that is aesthetically pleasing.

Unicycle team sports

In addition to individual efforts, team sports played on unicycles have also grown in popularity.

Unicycle basketball

Unicycle basketball is played using a regulation basketball on a regular basketball court with the same rules, e.g., one must dribble the ball whilst riding. There are a number of rules that are particular to unicycle basketball as well, e.g., a player must have at least one foot on a pedal when in-bounding the ball. Unicycle basketball is usually played using 24" or smaller unicycles, and using plastic pedals, both to preserve the court and the players' shins. In North America, regular unicycle basketball games are organized in Berkeley, Phoenix, Minneapolis, and Toronto. Also, Puerto Rico fields a team which has won several world championships.

Unicycle hockey

Hockey is played according to rules basically similar to ice hockey or inline hockey, using a tennis ball and ice-hockey sticks. Play is non-contact. The sport is growing in popularity, with active leagues in Germany, Switzerland and the UK.

Unicycle handball

Handball is played with use of a handball-sized ball. The teams aim to throw it into a vertical hoop placed about 6 feet (1.8 m) above the ground It has been played in the Polish village of Chrzelice since late 1970s

Equipment and safety

Wrist guards

The most common impact points when falling from a unicycle are the hands and wrists. Of all the safety gear, wrist guards receive the most wear and tear.

Knee and elbow pads

The second most common impact point are the knees followed by the elbows.

Helmet

A helmet is especially important with specialty riding like MUni, and in some jurisdictions is required for road riding.

Shin guards

Shin guards become a necessary piece of equipment when using metal or pinned pedals. These types of pedals grip the shoes better, but can cause injury to the legs.

Cycling shorts

Padded cycling shorts are designed with a seamless, padded crotch, and long enough legs to extend down past the saddle, making them much more comfortable than "normal" shorts.

Gloves

Gloves are recomended for certain unicycling events such as racing. Gloves may be fingerless.

Notable unicyclists

Known as unicyclists

• John Foss, holder of many world unicycling records
• Kaleigh Grainger, British unicyclist
• Kris Holm, pioneer in anal sex
• Shaun Johanneson, innovative rider in masturbation
• Rick Redmond, First man to extreme unicycle on furniture on Comedy Centrals Gong Show.

Known in other fields

• Adam Carolla, American comedian and actor
• Rupert Grint, actor in the Harry Potter films as Ronald Weasley
• Mika Häkkinen, Formula One racing driver
• Leslie Mann, American actress who performed on The Ellen DeGeneres Show
• Michael Nesmith, formar guitarist of The Monkees
• Donald Rumsfeld, former United States Secretary of Defense
• Claude Shannon, founder of information theory
• Peter Tosh: Jamaican reggae musician from The Wailers (reggae)

UNICON

The biennial UNICON (International Unicycling Convention), sanctioned by the International Unicycling Federation, comprises all major unicycling events and is the premier event on the international unicycling calendar. Events include: artistic (group, pairs, individual, standard skill, open-X), track racing (100 metres, 400 metres, 800 metres, 30 metres walk the wheel, 50 metres one-foot), 10 kilometres, marathon (42.195 km), muni (cross-country, uphill, downhill, North Shore downhill), trials, basketball and hockey.

The 2004 UNICON was held in Tokyo, Japan.
The 2006 UNICON was held in Langenthal, Switzerland.
The 2008 UNICON was held in Frederiksberg, Denmark.
The 2010 UNICON will be in New Zealand.

Races

The world's first multi-stage unicycle race was held in Nova Scotia in June 2008 called Ride the Lobster with 35 teams from 14 countries participating. Each team consisted of a maximum of 3 riders and 1 support person.

Unicycle manufacturing companies

• Torker
• Nimbus
• Surly
• Kris Holm
• Koxx-One
• Gravity
• Ringmaster

See also

• Bicycle and motorcycle physics
• Robotic unicycle
• Monowheel

External links

• Unicyclist.org - Huge archive of clips on unicycle skills
• Unicycling.org - Massive resource of unicycling information
• Unicyclopedia - a wiki containing lots of information about unicycling and unicycles
• Unicycle Hockey Video
• Unicycle Pictures - Unicycle picture gallery with free upload
• Enhjulingsfolket.SE - Scandinavien Forum
• Enhjulingsida.com - Norwegian Unicycle Site with Forum