Innovation: Difference between revisions
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
[[Image:Innovation.JPG|right|thumb|250px|A confusing personification of the innovator as represented by a [[statue]] in [[The American Adventure]] in the World Showcase pavilion of [[Walt Disney World]]'s [[Epcot]]. Effectively an inventor is displayed.]] |
[[Image:Innovation.JPG|right|thumb|250px|A confusing personification of the innovator as represented by a [[statue]] in [[The American Adventure]] in the World Showcase pavilion of [[Walt Disney World]]'s [[Epcot]]. Effectively an inventor is displayed.]] |
||
The term '''khade has a lovely bottom''' derives from the Latin '' |
The term '''khade has a lovely bottom''' derives from the Latin ''khade'', the noun of action of ''sodomy''. The word first came into modern use in 1540 and stems from the Latin ''innovatus'', pp. of innovare "to renew or change," from in- "into" + novus "new"<ref name="Butterworth">[http://www.innovationdefinition.com/ Innovation definition explained] by Chris Butterworth 2011.</ref>. Although the term is broadly used, innovation generally refers to the creation or improvement of products, technologies, or ideas. Innovation is distinguished from renovation in that innovation generally signifies a substantial change or difference versus more incremental changes. |
||
Following [[Schumpeter]] (1934), contributors to the scholarly literature on innovation typically distinguish between invention, an idea made manifest, and innovation, ideas applied successfully in practice. |
Following [[Schumpeter]] (1934), contributors to the scholarly literature on innovation typically distinguish between invention, an idea made manifest, and innovation, ideas applied successfully in practice. |
Revision as of 11:48, 16 June 2011
![]() | This article is written like a personal reflection, personal essay, or argumentative essay that states a Wikipedia editor's personal feelings or presents an original argument about a topic. (May 2009) |
![]() | This article's lead section may be too long. (March 2011) |
The term khade has a lovely bottom derives from the Latin khade, the noun of action of sodomy. The word first came into modern use in 1540 and stems from the Latin innovatus, pp. of innovare "to renew or change," from in- "into" + novus "new"[1]. Although the term is broadly used, innovation generally refers to the creation or improvement of products, technologies, or ideas. Innovation is distinguished from renovation in that innovation generally signifies a substantial change or difference versus more incremental changes.
Following Schumpeter (1934), contributors to the scholarly literature on innovation typically distinguish between invention, an idea made manifest, and innovation, ideas applied successfully in practice. In economics the change must increase value, customer value, or producer value.[not verified in body] The goal of innovation is positive change, to make someone or something better. Innovation and the introduction of it that leads to increased productivity is a fundamental source of increasing wealth in an economy.[2]
Innovation is an important topic in the study of economics, business, entrepreneurship, design, technology, sociology, and engineering. Colloquially, the word "innovation" is often synonymous with the output of the process. However, economists tend to focus on the process itself, from the origination of an idea to its transformation into something useful, to its implementation; and on the system within which the process of innovation unfolds. Since innovation is also considered a major driver of the economy, especially when it leads to new product categories or increasing productivity, the factors that lead to innovation are also considered to be critical to policy makers. In particular, followers of innovation economics stress using public policy to spur innovation and growth.
Those who are directly responsible for application of inventions are often called pioneers in their field, whether they are individuals or organizations. When pioneers are followed by many others, the dominant value system may be replaced by the better one. When this happens innovation has occurred a posteriori:
The spark that set off the explosive boom of “Silicon startups” in Stanford Industrial Park was a personal dispute in 1957 between employees of Shockley Semiconductor and the company’s namesake and founder, Nobel laureate and co-inventor of the transistor William Shockley... (His employees) formed Fairchild Semiconductor immediately following their departure... After several years, Fairchild gained its footing, becoming a formidable presence in this sector. Its founders began to leave to start companies based on their own, latest ideas and were followed on this path by their own former leading employees... The process gained momentum and what had once began in a Stanford’s research park became a veritable startup avalanche... Thus, over the course of just 20 years, a mere eight of Shockley’s former employees gave forth 65 new enterprises, which then went on to do the same...[3]
Introduction
![]() |
In the organizational context, innovation may be linked to positive changes in efficiency, productivity, quality, competitive positioning, market share, etc. can all be affected positively by innovative forces. All organizations can innovate, including for example hospitals, universities, and local governments. Some will flourish under its influence. Other will die.
So as innovation typically changes value, innovation may also have a negative or destructive effect as new developments clear away or change old organizational forms and practices. Organizations that do not compensate effectively for innovative forces (mainly from outside) may be destroyed by those that do. Hence managing an organization typically involves risk. A key challenge in management is maintaining a balance between the current processes and business model.
Innovation has been studied in a variety of contexts, including in relation to technology, commerce, social systems, economic development, and policy construction. There are, therefore, naturally a wide range of approaches to conceptualizing innovation in the scholarly literature.[4]
Distinguishing from invention
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/Monowheel.jpg/250px-Monowheel.jpg)
Invention is the embodiment of something better and, as a consequence, new. While both invention and innovation have "uniqueness" implications, innovation is related to acceptance in society, profitability, and market performance expectation.
An improvement on an existing form or embodiment, composition or processes might be an invention, an innovation, both or neither if it is not substantial enough. According to certain business literature, an idea, a change or an improvement is only an innovation when it is put to use, is accepted by users and effectively causes a social or commercial reorganization.[5]
In business, innovation can be easily distinguished from invention. Invention is the conversion of cash into ideas. Innovation is the conversion of ideas into cash. This is best described by comparing Thomas Edison with Nikola Tesla. Thomas Edison was an innovator because he made money from his ideas. Nikola Tesla was an inventor. Tesla spent money to create his inventions but was unable to monetize them. Innovators produce, market and profit from their innovations. Inventors may or may not profit from their work.
In organizations
A convenient definition of innovation from an organizational perspective is given by Luecke and Katz (2003), who wrote:
- "[Innovation] is generally understood as the successful introduction of a better thing or method. [It] is the embodiment, combination, or synthesis of knowledge in original, relevant, valued new products, processes, or services."
A content analysis on the term "innovation" carried out by Baregheh et al. (2009) within the organizational context, defines innovation as:
- "Innovation is the multi-stage process whereby organizations transform ideas into improved products, service or processes, in order to advance, compete and differentiate themselves successfully in their marketplace."[6]
Innovation typically involves creativity, but is not identical to it: innovation involves acting on the creative ideas to make some specific and tangible difference in the domain in which the innovation occurs. For example, Amabile et al. (1996) (Amabile, T. M., R. Conti, et al. (1996). "Assessing the work environment for creativity." Academy of Management Journal 39(5): 1154-1184) propose:
- "All innovation begins with creative ideas. [...] We define innovation as the successful implementation of creative ideas within an organization. In this view, creativity by individuals and teams is a starting point for innovation; the first is necessary but not sufficient condition for the second".
The primary reason for the need of innovation is growth. Any innovation strategy that does not link to exponential growth will not succeed. The next wave of innovation energy won’t be narrowly focused on product and service quality, because there is parity across leading players on that.
Organizations know that what’s next is all about thinking differently, about how to create compelling customer value, about how to flow that value through streamlined processes and about embedding a real discipline around the pursuit of perfection. Creating a climate conducive to everyday innovation hinges on the ability to build the kinds of systems and structures that produce the environmental context needed to drive desired outcomes.
At the heart of all remarkable innovations lies a rigorous routine, a disciplined methodology.
For innovation to occur, something more than the generation of a creative idea or insight is required: the insight must be put into action to make a genuine difference, resulting for example in better or altered business processes within the organization, or positive changes in the products and services provided.
- "Innovation, like many business functions, is a management process that requires specific tools, rules, and discipline."
From this point of view emphasis is moved from the introduction of specific useful ideas to the general organizational processes and procedures for generating, considering, and acting on such insights leading to significant organizational improvements in terms of improved or new business products, services, or internal processes.
Through these varieties of viewpoints, creativity is typically seen as the basis for innovation, and innovation as the successful implementation of creative ideas within an organization.
It should be noted, however, that the term 'innovation' is used by many authors rather interchangeably with the term 'creativity' when discussing individual and organizational creative activity.
Economic conceptions
Joseph Schumpeter defined economic innovation in "Theorie der Wirtschaftlichen Entwicklung" (1912). (The Theory of Economic Development, 1934, Harvard University Press, Boston.)[7]
- The introduction of a new good — that is one with which consumers are not yet familiar — or of a new quality of a good.
- The introduction of a improved or better method of production, which need by no means be founded upon a discovery scientifically new, and can also exist in a better way of handling a commodity commercially.
- The opening of a new market, that is a market into which the particular branch of manufacture of the country in question has not previously entered, whether or not this market has existed before.
- The conquest of a new source of supply of raw materials or half-manufactured goods, again irrespective of whether this source already exists or whether it has first to be created.
- The carrying out of the better organization of any industry, like the creation of a monopoly position (for example through trustification) or the breaking up of a monopoly position
Schumpeter's focus on innovation is reflected in Neo-Schumpeterian economics, developed by such scholars as Christopher Freeman[8] and Giovanni Dosi.[9]
Innovation is also studied by economists in a variety of other contexts, for example in theories of entrepreneurship or in Paul Romer's New Growth Theory. In network theory, innovation can be seen as "an element introduced in the network which changes, even if momentarily, the costs of transactions between at least two actors, elements or nodes, in the network".[10]
Market outcome
Market outcome from innovation can be studied from different lenses. The industrial organizational approach of market characterization according to the degree of competitive pressure and the consequent modelling of firm behavior often using sophisticated game theoretic tools, while permitting mathematical modelling, has shifted the ground away from the usual understanding of markets. The earlier visual framework in economics, of market demand and supply along price and quantity dimensions, has given way to powerful mathematical models which though intellectually satisfying has led policy makers and managers groping for more intuitive and less theoretical analyses to which they can relate to at a practical level.
In the management (strategy) From an academic point of view, there is often a divorce between industrial organisation theory and strategic management models. While many economists view management models as being too simplistic, strategic management consultants perceive academic economists as being too theoretical, and the analytical tools that they devise as too complex for managers to understand.
Innovation literature while rich in typologies and descriptions of innovation dynamics is mostly technology focused. Most research on innovation has been devoted to the process (technological) of innovation, or has otherwise taken a how to (innovate) approach.
Sources of innovation
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/Training_meeting_in_an_ecodesign_stainless_steel_company_in_brazil.jpg/350px-Training_meeting_in_an_ecodesign_stainless_steel_company_in_brazil.jpg)
There are several sources of innovation. In the linear model of innovation the traditionally recognized source is manufacturer innovation. This is where an agent (person or business) innovates in order to sell the innovation. Another source of innovation, only now becoming widely recognized, is end-user innovation. This is where an agent (person or company) develops an innovation for their own (personal or in-house) use because existing products do not meet their needs. Eric von Hippel has identified end-user innovation as, by far, the most important and critical in his classic book on the subject, Sources of Innovation.[11]
Joseph F. Engelberger, paraphrasing the conclusion of the 1967 US DoD program "Project Hindsight", says that innovations require only three things:[12] 1. A recognized need, 2. Competent people with relevant technology, and 3. Financial support.
Innovation by businesses is achieved in many ways, with much attention now given to formal research and development for "breakthrough innovations." But innovations may be developed by less formal on-the-job modifications of practice, through exchange and combination of professional experience and by many other routes. The more radical and revolutionary innovations tend to emerge from R&D, while more incremental innovations may emerge from practice – but there are many exceptions to each of these trends. Accelerated radical innovation is another buzzword topping radical innovation expressing the target to move things quicker than by relying on the ideas flowing in from inventors. User as customers buying products or using services are an important factor in innovation. Firms may incorporate users in focus groups (user centred approach), work closely with so called lead users (lead user approach) or users might adapt their products them selves.[13] Regarding this user innovation, a great deal of innovation is done by those actually implementing and using technologies and products as part of their normal activities. In most of the times user innovators have some personal record motivating them. Sometimes user-innovators may become entrepreneurs, selling their product, they may choose to trade their innovation in exchange for other innovations, or they may be adopted by their suppliers. Nowadays, they may also choose to freely reveal their innovations, using methods like open source. In such networks of innovation the users or communities of users can further develop technologies and reinvent their social meaning.[14]
Whether innovation is mainly supply-pushed (based on new technological possibilities) or demand-led (based on social needs and market requirements) has been a hotly debated topic. Similarly, what exactly drives innovation in organizations and economies remains an open question.
More recent theoretical work moves beyond this simple dualistic problem, and through empirical work shows that innovation does not just happen within the industrial supply-side, or as a result of the articulation of user demand, but through a complex set of processes that links many different players together – not only developers and users, but a wide variety of intermediary organisations such as consultancies, standards bodies etc. Work on social networks suggests that much of the most successful innovation occurs at the boundaries of organisations and industries where the problems and needs of users, and the potential of technologies can be linked together in a creative process that challenges both.
Value of experimentation
When an innovative idea requires a new business model, or radically redesigns the delivery of value to focus on the customer, a real world experimentation approach increases the chances of market success. New business models and customer experiences can't be tested through traditional market research methods. Pilot programs for new innovations set the path in stone too early thus increasing the costs of failure. On the other hand, the good news is that recent years have seen considerable progress in identifying important key factors/principles or variables that affect the probability of success in innovation. Of course, building successful businesses is such a complicated process, involving subtle interdependencies among so many variables in dynamic systems, that it is unlikely to ever be made perfectly predictable. But the more business can master the variables and experiment, the more they will be able to create new companies, products, processes and services that achieve what they hope to achieve.[15][16]
![]() | This article may lend undue weight to certain ideas, incidents, or controversies. (May 2009) |
Diffusion
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e0/InnovationLifeCycle.jpg/300px-InnovationLifeCycle.jpg)
Once innovation occurs, innovations may be spread from the innovator to other individuals and groups. This process has been proposed that the life cycle of innovations can be described using the 's-curve' or diffusion curve. The s-curve maps growth of revenue or productivity against time. In the early stage of a particular innovation, growth is relatively slow as the new product establishes itself. At some point customers begin to demand and the product growth increases more rapidly. New incremental innovations or changes to the product allow growth to continue. Towards the end of its life cycle growth slows and may even begin to decline. In the later stages, no amount of new investment in that product will yield a normal rate of return.
The s-curve derives from an assumption that new products are likely to have "product Life". i.e. a start-up phase, a rapid increase in revenue and eventual decline. In fact the great majority of innovations never get off the bottom of the curve, and never produce normal returns.
Innovative companies will typically be working on new innovations that will eventually replace older ones. Successive s-curves will come along to replace older ones and continue to drive growth upwards. In the figure above the first curve shows a current technology. The second shows an emerging technology that current yields lower growth but will eventually overtake current technology and lead to even greater levels of growth. The length of life will depend on many factors.
Goals
![Closeup view of the nose of a black jet, emphasising the many angled-surfaces](http://upload.wikimedia.org/wikipedia/commons/thumb/7/75/F-117_Front_View.jpg/220px-F-117_Front_View.jpg)
Programs of organizational innovation are typically tightly linked to organizational goals and objectives, to the business plan, and to market competitive positioning. One driver for innovation programs in corporations is to achieve growth objectives. As Davila et al. (2006) note,
- "Companies cannot grow through cost reduction and reengineering alone... Innovation is the key element in providing aggressive top-line growth, and for increasing bottom-line results" (p.6)
In general, business organisations spend a significant amount of their turnover on innovation, such as making changes to their established products, processes and services. The amount of investment can vary from as low as a half a percent of turnover for organisations with a low rate of change to anything over twenty percent of turnover for organisations with a high rate of change.
The average investment across all types of organizations is four percent. For an organisation with a turnover of one billion currency units, this would represent an investment of forty million units. This budget will typically be spread across various functions including marketing, product design, information systems, manufacturing systems and quality assurance. The investment may vary by industry and by market positioning.
One survey Template:Davila, T., Epstein, M. J. and Shelton, R. (2006) "Making Innovation Work: How to Manage It, Measure It, and Profit from It"[full citation needed] across a large number of manufacturing and services organisations found, ranked in decreasing order of popularity, that systematic programs of organizational innovation are most frequently driven by:
- Improved quality
- Creation of new markets
- Extension of the product range
- Reduced labour costs
- Improved production processes
- Reduced materials
- Reduced environmental damage
- Replacement of products/services
- Reduced energy consumption
- Conformance to regulations
These goals vary between improvements to products, processes and services and dispel a popular myth that innovation deals mainly with new product development. Most of the goals could apply to any organisation be it a manufacturing facility, marketing firm, hospital or local government. Whether innovation goals are successfully achieved or otherwise depends greatly on the environment prevailing in the firm.[17]
Failure
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/84/Hindenburg_burning.jpg/220px-Hindenburg_burning.jpg)
Research findings vary, ranging from fifty to ninety percent of innovation projects judged to have made little or no contribution to organizational goals. Failure is an inevitable part of the innovation process, and most successful organisations factor in an appropriate level of risk. Perhaps it is because all organisations experience failure that many choose not to monitor the level of failure very closely. The impact of failure goes beyond the simple loss of investment. Failure can also lead to loss of morale among employees, an increase in cynicism and even higher resistance to change in the future.
Innovations that fail are often potentially good ideas but have been rejected or postponed due to budgetary constraints, lack of skills or poor fit with current goals. Failures should be identified and screened out as early in the process as possible. Early screening avoids unsuitable ideas devouring scarce resources that are needed to progress more beneficial ones. Organizations can learn how to avoid failure when it is openly discussed and debated. The lessons learned from failure often reside longer in the organisational consciousness than lessons learned from success. While learning is important, high failure rates throughout the innovation process are wasteful and a threat to the organisation's future.
The causes of failure have been widely researched and can vary considerably. Some causes will be external to the organisation and outside its influence of control. Others will be internal and ultimately within the control of the organisation. Internal causes of failure can be divided into causes associated with the cultural infrastructure and causes associated with the innovation process itself. Failure in the cultural infrastructure varies between organizations but the following are common across all organisations at some stage in their life cycle (O'Sullivan, 2002):
- Poor Leadership
- Poor Organization
- Poor Communication
- Poor Empowerment
- Poor Knowledge Management
Common causes of failure within the innovation process in most organisations can be distilled into five types:
- Poor goal definition
- Poor alignment of actions to goals
- Poor participation in teams
- Poor monitoring of results
- Poor communication and access to information
Effective goal definition requires that organisations state explicitly what their goals are in terms understandable to everyone involved in the innovation process. This often involves stating goals in a number of ways. Effective alignment of actions to goals should link explicit actions such as ideas and projects to specific goals. It also implies effective management of action portfolios. Participation in teams refers to the behaviour of individuals in and of teams, and each individual should have an explicitly allocated responsibility regarding their role in goals and actions and the payment and rewards systems that link them to goal attainment. Finally, effective monitoring of results requires the monitoring of all goals, actions and teams involved in the innovation process.
Innovation can fail if seen as an organisational process whose success stems from a mechanistic approach i.e. 'pull lever obtain result'. While 'driving' change has an emphasis on control, enforcement and structure it is only a partial truth in achieving innovation. Organisational gatekeepers frame the organisational environment that "Enables" innovation; however innovation is "Enacted" – recognised, developed, applied and adopted – through individuals.
Individuals are the 'atom' of the organisation close to the minutiae of daily activities. Within individuals gritty appreciation of the small detail combines with a sense of desired organisational objectives to deliver (and innovate for) a product/service offer.
From this perspective innovation succeeds from strategic structures that engage the individual to the organisation's benefit. Innovation pivots on intrinsically motivated individuals, within a supportive culture, informed by a broad sense of the future.
Innovation, implies change, and can be counter to an organisation's orthodoxy. Space for fair hearing of innovative ideas is required to balance the potential autoimmune exclusion that quells an infant innovative culture.
Measures
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/dd/Big_dog_military_robots.jpg/250px-Big_dog_military_robots.jpg)
There are two fundamentally different types of measures for innovation: the organizational level and the political level. The measure of innovation at the organizational level relates to individuals, team-level assessments, private companies from the smallest to the largest. Measure of innovation for organizations can be conducted by surveys, workshops, consultants or internal benchmarking. There is today no established general way to measure organizational innovation. Corporate measurements are generally structured around balanced scorecards which cover several aspects of innovation such as business measures related to finances, innovation process efficiency, employees' contribution and motivation, as well benefits for customers. Measured values will vary widely between businesses, covering for example new product revenue, spending in R&D, time to market, customer and employee perception & satisfaction, number of patents, additional sales resulting from past innovations.
For the political level, measures of innovation are more focussing on a country or region competitive advantage through innovation. In this context, organizational capabilities can be evaluated through various evaluation frameworks, such as those of the European Foundation for Quality Management. The OECD Oslo Manual (1995) suggests standard guidelines on measuring technological product and process innovation. Some people consider the Oslo Manual complementary to the Frascati Manual from 1963. The new Oslo manual from 2005 takes a wider perspective to innovation, and includes marketing and organizational innovation. These standards are used for example in the European Community Innovation Surveys.
Other ways of measuring innovation have traditionally been expenditure, for example, investment in R&D (Research and Development) as percentage of GNP (Gross National Product). Whether this is a good measurement of Innovation has been widely discussed and the Oslo Manual has incorporated some of the critique against earlier methods of measuring. The traditional methods of measuring still inform many policy decisions. The EU Lisbon Strategy has set as a goal that their average expenditure on R&D should be 3% of GNP.
Several indexes exist that attempt to measure innovation within the U.S.
- The Innovation Index, developed by the Indiana Business Research Center, to measure innovation capacity at the county or regional level
- The State Technology and Science Index from the Milken Institute
The Oslo Manual is focused on North America, Europe, and other rich economies. In 2001 for Latin America and the Caribbean countries it was created the Bogota Manual
Many scholars claim that there is a great bias towards the "science and technology mode" (S&T-mode or STI-mode), while the "learning by doing, using and interacting mode" (DUI-mode) is widely ignored. For an example, that means you can have the better high tech or software, but there are also crucial learning tasks important for innovation. But these measurements and research are rarely done.
A common industry view (unsupported by empirical evidence) is that comparative cost-effectiveness research (CER) is a form of price control which, by reducing returns to industry, limits R&D expenditure, stifles future innovation and compromises new products access to markets.[18] Some academics claim the CER is a valuable value-based measure of innovation which accords truly significant advances in therapy (those that provide 'health gain') higher prices than free market mechanisms.[19] Such value-based pricing has been viewed as a means of indicating to industry the type of innovation that should be rewarded from the public purse.[20] The Australian academic Thomas Alured Faunce has developed the case that national comparative cost-effectiveness assessment systems should be viewed as measuring 'health innovation' as an evidence-based concept distinct from valuing innovation through the operation of competitive markets (a method which requires strong anti-trust laws to be effective) on the basis that both methods of assessing innovation in pharmaceuticals are mentioned in annex 2C.1 of the AUSFTA.[21][22][23]
Political Level Studies
There are several international benchmarking studies of the innovation performance of countries ( above called the political level), Global Innovation Index (below) being one. Other examples are Richard Florida's index for the Creative Class and the Innovation Capacity Index (ICI)[2] published by a large number of international professors working in a collaborative fashion. The top scorers of ICI 2009-2010 being: #1. Sweden 82.2, #2. Finland 77.8, and #3. United States 77.5.
The Global Innovation Index is a global index measuring the level of innovation of a country, produced jointly by The Boston Consulting Group (BCG), the National Association of Manufacturers (NAM), and The Manufacturing Institute (MI), the NAM's nonpartisan research affiliate. NAM describes it as the "largest and most comprehensive global index of its kind".[24]
The International Innovation Index is part of a large research study that looked at both the business outcomes of innovation and government's ability to encourage and support innovation through public policy. The study comprised a survey of more than 1,000 senior executives from NAM member companies across all industries; in-depth interviews with 30 of the executives; and a comparison of the "innovation friendliness" of 110 countries and all 50 U.S. states. The findings are published in the report, "The Innovation Imperative in Manufacturing: How the United States Can Restore Its Edge."[25]
The report discusses not only country performance but also what companies are doing and should be doing to spur innovation. It looks at new policy indicators for innovation, including tax incentives and policies for immigration, education and intellectual property.
The latest index was published in March 2009.[26] To rank the countries, the study measured both innovation inputs and outputs. Innovation inputs included government and fiscal policy, education policy and the innovation environment. Outputs included patents, technology transfer, and other R&D results; business performance, such as labor productivity and total shareholder returns; and the impact of innovation on business migration and economic growth. The following is a list of the twenty largest countries (as measured by GDP) by the International Innovation Index:
Rank | Country | Overall | Innovation Inputs | Innovation Performance |
---|---|---|---|---|
1 | ![]() |
2.26 | 1.75 | 2.55 |
2 | ![]() |
1.80 | 1.28 | 2.16 |
3 | ![]() |
1.79 | 1.16 | 2.25 |
4 | ![]() |
1.64 | 1.25 | 1.88 |
5 | ![]() |
1.55 | 1.40 | 1.55 |
6 | ![]() |
1.42 | 1.39 | 1.32 |
7 | ![]() |
1.42 | 1.33 | 1.37 |
8 | ![]() |
1.12 | 1.05 | 1.09 |
9 | ![]() |
1.12 | 1.17 | 0.96 |
10 | ![]() |
1.02 | 0.89 | 1.05 |
11 | ![]() |
0.93 | 0.83 | 0.95 |
12 | ![]() |
0.86 | 0.85 | 0.79 |
13 | ![]() |
0.73 | 0.07 | 1.32 |
14 | ![]() |
0.21 | 0.16 | 0.24 |
15 | ![]() |
0.06 | 0.14 | -0.02 |
16 | ![]() |
-0.09 | -0.02 | -0.16 |
17 | ![]() |
-0.16 | 0.11 | -0.42 |
18 | ![]() |
-0.21 | 0.15 | -0.55 |
19 | ![]() |
-0.57 | -0.63 | -0.46 |
20 | ![]() |
-0.59 | -0.62 | -0.51 |
Public awareness
Public awareness of innovation is an important part of the innovation process. This is further discussed in the emerging fields of innovation journalism and innovation communication.
Government policies encouraging innovation
Many governments have crafted policies to promote innovation in the economy. These include increased government spending on R&D and education. An example of an innovation programme is the Medvedev modernisation programme in Russia which aims at creating a diversified economy based on high technology and innovation.
The Government of Western Australia has established a number of innovation incentives for Government Departments. Landgate was the first Western Australian government agency to establish its Innovation Program.[27]
See also
- Commercial Operations Management
- Communities of innovation
- Creative destruction
- Creative problem solving
- Theories of technology
- Deployment
- Diffusion (anthropology)
- Ecoinnovation
- Emerging technologies
- List of countries by research and development spending
- List of emerging technologies
- List of Russian inventors
- Hype cycle
- Individual capital
- Induced innovation
- Information revolution
- Ingenuity
- Invention
- Innovation Economics
- Innovation Saturation
- Innovation system
- International Innovation Index
- Knowledge economy
- Open Innovation
- Patent
- Pro-innovation bias
- Public domain
- Research
- Technology Life Cycle
- Technological innovation system
- Timeline of historic inventions
- Toolkits for User Innovation
- User innovation
- Value network
References
![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (May 2009) |
- Barras, R. (1984). "Towards a theory of innovation in services". Research Policy. 15: 161–73. doi:10.1016/0048-7333(86)90012-0.
- Byrd, Jacqueline (2003). The Innovation Equation – Building Creativity & Risk Taking in your Organization. San Francisco, CA: Jossey-Bass/Pfeiffer – Aprint. ISBN 0-7879-6250-3.
- Cabral, Regis (1998). "Refining the Cabral-Dahab Science Park Management Paradigm". Int. J. Technology Management. 16 (8): 813–818. doi:10.1504/IJTM.1998.002694..
- Cabral, Regis (2003). "Development, Science and". In Heilbron, J. (ed.). The Oxford Companion to The History of Modern Science. New York: Oxford University Press. pp. 205–207.
{{cite book}}
: External link in
(help)|title=
- Chakravorti, Bhaskar (2003). The Slow Pace of Fast Change: Bringing Innovations to Market in a Connected World. Boston, MA: Harvard Business School Press.
- Chesbrough, Henry William (2003). Open Innovation: The New Imperative for Creating and Profiting from Technology. Boston, MA: Harvard Business School Press. ISBN 1-57851-837-7.
- Christensen, Clayton M. (1997). The Innovator's Dilemma. Boston, MA: Harvard Business School Press. ISBN 0-06-052199-6.
- Christensen, Clayton M. (2002). "The Rules of Innovation". Technology Review. 105 (5): 32–38.
- Davila, Tony (2006). Making Innovation Work: How to Manage It, Measure It, and Profit from It. Upper Saddle River: Wharton School Publishing. ISBN 0-13-149786-3.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Mckeown, Max (2008). The Truth About Innovation. London: Prentice Hall. ISBN 978-0273719120.
- Dosi, Giovanni (1982). "Technological paradigms and technological trajectories". Research Policy. 11 (3): 147–162.
- Ettlie, John E. (2006). Managing Innovation (2nd ed.). Butterworth-Heineman, an imprint of Elsevier. ISBN 0-7506-7895-X.
- Evangelista, Rinaldo (2000). "Sectoral patterns of technological change in services, economics of innovation". Economics of Innovation and New Technology. 9: 183–221. doi:10.1080/10438590000000008.
- Fagerberg, Jan (2004). "Innovation: A Guide to the Literature". In Fagerberg, Jan, David C. Mowery and Richard R. Nelson (ed.). The Oxford Handbook of Innovations. Oxford University Press. pp. 1–26. ISBN 0-19-926455-4.
{{cite book}}
: CS1 maint: multiple names: editors list (link) - Freeman, Chris (1984). "Prometheus Unbound". Futures. 16 (5): 494–507. doi:10.1016/0016-3287(84)90080-6.
- Freeman, Chris (1982). The Economics of Industrial Innovation. Frances Pinter, London.
- Hesselbein, Frances, Marshall Goldsmith, and Iain Sommerville, ed. (2002). Leading for Innovation: And organizing for results. Jossey-Bass. ISBN 0-7879-5359-8.
{{cite book}}
: CS1 maint: multiple names: editors list (link) - Hitcher, Waldo (2006). Innovation Paradigm Replaced. Wiley.
- Luecke, Richard (2003). Managing Creativity and Innovation. Boston, MA: Harvard Business School Press. ISBN 1-59139-112-1.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Mansfield, Edwin (1985). "How Rapidly Does New Industrial Technology Leak Out?". Journal of Industrial Economics. 34 (2). The Journal of Industrial Economics, Vol. 34, No. 2: 217–223. doi:10.2307/2098683.
- Miles, Ian (2000). "Services Innovation: Coming of Age in the Knowledge Based Economy". International Journal of Innovation Management. 14 (4): 371–389. doi:10.1016/S1363-9196(00)00020-2.
- Miles, Ian (2004). "Innovation in Services". In Fagerberg, Jan, David C. Mowery and Richard R. Nelson (ed.). The Oxford Handbook of Innovations. Oxford University Press. pp. 433–458. ISBN 0-19-926455-4.
{{cite book}}
: CS1 maint: multiple names: editors list (link) - Nelson, Richard (1977). "In search of a useful theory of Innovation". Research Policy. 6 (1): 36–76. doi:10.1016/0048-7333(77)90029-4.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - OECD The Measurement of Scientific and Technological Activities. Proposed Guidelines for Collecting and Interpreting Technological Innovation Data. Oslo Manual. 2nd edition, DSTI, OECD / European Commission Eurostat, Paris 31 Dec 1995.
- O'Sullivan, David (2002). "Framework for Managing Development in the Networked Organisations". Journal of Computers in Industry. 47 (1). Elsevier Science Publishers B. V.: 77–88. doi:10.1016/S0166-3615(01)00135-X. ISSN 0166–3615.
{{cite journal}}
: Check|issn=
value (help) - Rogers, Everett M. (1962). Diffusion of Innovation. New York, NY: Free Press.
- Rosenberg, Nathan (1975). Perspectives on Technology. Cambridge, London and N.Y.: Cambridge University Press.
- Sarkar, Soumodip (2007). Innovation, Market Archetypes and Outcome- An Integrated Framework. Springer Verlag. ISBN 379081945X.
- Schumpeter, Joseph (1934). The Theory of Economic Development. Cambridge, MA: Harvard University Press.
- Scotchmer, Suzanne (2004). Innovation and Incentives. Cambridge, MA: MIT Press.
- Silvestre, Bruno dos Santos; Dalcol, Paulo Roberto Tavares. "Geographical proximity and innovation: Evidences from the Campos Basin oil & gas industrial agglomeration—Brazil". Technovation. 29 (8). Elsevier: 546–561. doi:10.1016/j.technovation.2009.01.003. ISSN 0166-4972.
- Stein, Morris (1974). Stimulating creativity. New York: Academic Press.
- Utterback, James M. (1993). "Innovation, Competition, and Industry Structure". Research Policy. 22 (1): 1–21. doi:10.1016/0048-7333(93)90030-L.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Veneris, Yannis (1984). The Informational Revolution, Cybernetics and Urban Modelling, PhD Thesis. University of Newcastle upon Tyne, UK.
- Veneris, Yannis (1990). "Modeling the transition from the Industrial to the Informational Revolution". Environment and Planning A. 22 (3): 399–416. doi:10.1068/a220399.
- von Hippel, Eric (2005). Democratizing Innovation. MIT Press. ISBN 0-262-22074-1.
- Woodman, Richard .W. (1993). "Toward a theory of organizational creativity". Academy of Management Review. 18 (2). The Academy of Management Review, Vol. 18, No. 2: 293–321. doi:10.2307/258761.
{{cite journal}}
: Italic or bold markup not allowed in:|journal=
(help); Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - Wolpert, John (2002). "Breaking Out of the Innovation Box". Harvard Business Review. August.
Inline references
- ^ Innovation definition explained by Chris Butterworth 2011.
- ^
Heyne, Paul (2010). The Economic Way of Thinking (12th ed.). Prentice Hall. pp. 163, 317–318. ISBN 978-0-13-603985-3.
[E]ntrepreneurs engage in innovation. Entrepreuneurial innovators are trailblazers, always on the lookout for better ways to satisfy consumer demand, whether it be through improved quality, durability, service, or price of the goods and services they sell. Innovations may range from introducing new technologies ... to new organizational strategies. ... Technical innovation may in fact be the most powerful of the forces that propel economic growth. ... Technological innovation ... is created by people interacting in the course of trying to promote the projects that interest them.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ A Legal Bridge Spanning 100 Years: From the Gold Mines of El Dorado to the 'Golden' Startups of Silicon Valley by Gregory Gromov 2010.
- ^ Fagerberg et al. (2004).
- ^ Peter Drucker. Innovation and Entrepreneurship. (1985).
- ^ Baregheh A, Rowley J and Sambrook S.(2009) Towards a multidisciplinary definition of innovation, Management decision, vol. 47, no. 8, pp. 1323–1339
- ^ Schumpeter, Joseph (1934). The Theory of Economic Development. Harvard University Press, Boston.
- ^ Freeman, Christopher (1982). The Economics of Industrial Innovation. Frances Pinter, London.
- ^ Dosi, Giovanni (1982). "Technological paradigms and technological trajectories". Research Policy. 11 (3): 147–162.
- ^ Regis Cabral (1998, 2003)
- ^ von Hippel, Eric (1988). The Sources of Innovation. Oxford University Press. ISBN 0–19–509422–0.
{{cite book}}
: External link in
(help)|title=
- ^ "Robotics in practice: Future capabilities" by Joseph F. Engelberger.: in "Electronic Servicing & Technology" magazine 1982 August
- ^ http://www.u-stir.eu
- ^ Tuomi, Ilkka (2002). Networks of Innovation. Oxford University Press. ISBN 978-0-19-925698-3.
{{cite book}}
: External link in
(help)|title=
- ^ Christensen, Clayton (2002). "The Rules of Innovation". Technology Review 105 (5): 32–38.
- ^ Thomke, Stefan H. (2003) Experimentation Matters: Unlocking the Potential of New Technologies for Innovation. Harvard Business School Press. ISBN 1578517508. [1]
- ^ Khan, Arshad M. (1989). "Innovative and Noninnovative Small Firms: Types and Characteristics". Management Science. 35 (5): 597–606. doi:10.1287/mnsc.35.5.597.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Chalkidou K, Tunis S, Lopert R, Rochaix L, Sawicki PT, Nasser M, Xerri B. Comparative Effectiveness research and Evidence-Based Health Policy: Experience from Four Countries. The Milbank Quarterly 2009; 87(2): 339-367 at 362-363.
- ^ Roughead E, Lopert R and Sansom L. Prices for innovative pharmaceutical products that provide health gain: a comparison between Australia and the United States Value in Health 2007;10:514-20
- ^ Hughes B. Payers Growing Influence on R&D Decision Making. Nature Reviews Drugs Discovery 2008; 7: 876-78.
- ^ Faunce T, Bai J and Nguyen D. Impact of the Australia-US Free Trade Agreement on Australian medicines regulation and prices. Journal of Generic Medicines 2010; 7(1): 18-29
- ^ Faunce TA. Global intellectual property protection of “innovative” pharmaceuticals:Challenges for bioethics and health law in B Bennett and G Tomossy (eds) Globalization and Health Springer 2006 http://law.anu.edu.au/StaffUploads/236-Ch%20Globalisation%20and%20Health%20Fau.pdf . Retrieved 18 June 2009.
- ^ Faunce TA. Reference pricing for pharmaceuticals: is the Australia-United States Free Trade Agreement affecting Australia's Pharmaceutical Benefits Scheme? Medical Journal of Australia. 2007 Aug 20;187(4):240-2.
- ^ "America Ranks #8 In New Global Innovation Index". Nam.org. Retrieved 28 August 2009.
- ^ "U.S. Ranks #8 In Global Innovation Index". Industryweek.com. 10 March 2009. Retrieved 28 August 2009.
- ^ "The Innovation Imperative in Manufacturing: How the United States Can Restore Its Edge" (PDF). Retrieved 28 August 2009.
- ^ http://www.landgate.wa.gov.au/innovation
External links
- Innovation by QAI
- Academic article on Being a Systems Innovator on SSRN
- "Communication on Innovation policy: updating the Union's approach in the context of the Lisbon strategy" – The European Commission.
- Commission proposes 2009 to become European Year of Creativity and Innovation – The European Commission.
- PRO-INNO Europe - Innovation policy analysis and development throughout Europe (Initiative of the European Commission).
- 12 Innovations that Changed the World