SD card
![]() |
![]() Pair of SD cards | |
Media type | Memory Card |
---|---|
Capacity | Standard SD: 8 MB to 4 GB SDHC: 4 GB to 32 GB (theoretical max for SDHC is 2 TB.) |
Developed by | SD Card Association |
Usage | Portable devices, including digital cameras and handheld computers |
Extended from | MultiMediaCard (MMC) |
Secure Digital (SD) is a flash (non-volatile) memory card format developed by Matsushita, SanDisk, and Toshiba for use in portable devices. Today it is widely used in digital cameras, handheld computers, PDAs, mobile phones, GPS receivers, and video game consoles. Standard SD card capacities range from 8 MB to 4 GB and for high capacity SDHC cards 8 MB to 32 GB as of 2008.
The format has proven to be very popular. However, a change in the format, while allowing capacities greater than 4 GB (SDHC), has created compatibility issues with older devices which cannot read the new format. Since SDHC format cards have the same physical shape and form factor as the older format, this has caused considerable confusion for consumers.[1][2] SDHC cards require an SDHC capable device firmware, generally not found with older devices.
History
In August of 1999, Matsushita (better known by its Panasonic brand name), SanDisk, and Toshiba first announced an agreement on a comprehensive collaboration to jointly develop, specify and widely promote a next generation secure memory card called the SD Memory Card. With a physical profile of 24 mm × 32 mm × 2.1 mm, the new card provided both an SDMI-compliant (Secure Digital Music Initiative), high-level of copyright protection and high-density memory capacity for the time. The new memory card format was designed to compete with Sony's Memory Stick format that was released in 1998.
The “Secure” in Secure Digital comes from the card’s origin. To create the SD card, Toshiba added encryption hardware to the already-existent MMC, to calm music industry concerns that MMCs would allow for easy piracy of music. (A similar scheme is the MagicGate standard used in Memory Sticks.) In theory, the encryption would allow some enforcement of Digital rights management[1] schemes on digital music, but the capability is rarely used.
The signature “SD” logo was actually developed for another use entirely: it was originally used for “Super Density Disc”, a prototype format by Toshiba created during the development of DVD. This is why the “D” looks similar to half of an optical disc, possibly reinforced by the SD card's music industry features and consumers' familiarity with music on optical discs.
At the 2000 CES trade show Matsushita, SanDisk and Toshiba Corporation announced that a new industry-wide association would be created to set industry standards for their proprietary SD (Secure Digital) Memory Card and promote its wide acceptance in digital applications. The new organization, named the SDAssociation (SDA), is headquartered in California and its executive membership includes some 30 world-leading high-tech companies and major content companies. Sampling of the SD Memory Card began in the first quarter of 2000, and production shipments commenced in the second quarter of 2000. The card was initially available in 32 and 64 megabyte capacities.
In April 2006, the SDA released a detailed specification for the non-security related portions of the SD Memory Card standard. In addition, they released specifications for the SDIO cards and the standard SD host controller. During the same year, specifications were finalised for the small form-factor microSD (formerly known as TransFlash) and SDHC, with capacities in excess of 2 GB and a minimum sustained read/write speed of 2.2 MB/s.
Design and Implementation
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/67/SD_Cards.svg/250px-SD_Cards.svg.png)
SD cards are based on the older MultiMediaCard (MMC) format, but have a number of differences:
- The SD card is asymmetrically shaped in order not to be inserted upside down, while an MMC would go in most of the way but not make contact if inverted.
- Most SD cards are physically thicker than MMCs. SD cards generally measure 32 mm × 24 mm × 2.1 mm, but can be as thin as 1.4 mm, just like MMCs (see below).
- The contacts are recessed beneath the surface of the card (like Memory Stick cards), protecting the contacts from contact with the fingers.
- SD cards typically have transfer rates in the range of 10-20 MBytes/s, but this is always changing, particularly in light of recent improvements to the MMC standard. [3]
Devices with SD slots can use the thinner MMCs, but the standard SD cards will not fit into the thinner MMC slots. miniSD and microSD cards can be used directly in SD slots with a simple passive adapter, since they differ in size and shape but not electrical interface. With an active electronic adapter, SD cards can be used in CompactFlash or PC card slots. Some SD cards include a USB connector for compatibility with desktop and laptop computers, and card readers allow SD cards to be accessed via connectivity ports such as USB, FireWire, and the parallel printer port. SD cards can also be accessed via a floppy disk drive with a FlashPath adapter.
Optional write-protect tab
When looking at the card from the top (see pictures) there is one required notch on the right side (the side with the diagonal notched corner).
On the left side there is usually a slidable tab. This is the write-protect tab. The MMC has neither notch. It is easy to mistake this tab as an electronic on/off switch built inside the card, but it is used simply as a tab/notch switch. The tab/notch works the same way as the notches on compact audio cassettes and videotape cassette tapes or floppy disks, where the device senses the tab/notch and determines if the card is write-protected or not.
When this write-protect tab is in the down position (away from the end that is inserted) then it is write protected and read-only. When the tab is in the up position it is write enabled. Since the tab is optional, the card can have no switch and no notch, which makes the card always writable, or it can have an empty notch and be a ROM card, which makes the card always write-protected and read-only. If the tab becomes broken or falls off then the card will become a write-protected ROM card and no longer be writable. A possible troubleshooting solution would be to apply tape over the notched area (avoiding the connectors and the other notch) to configure the card in a permanent writable state.
If the sensor inside the device is faulty and unable to detect the tab/notch, all SD cards will seem to be either write-protected or write-enabled, depending on the failure mode.
The write protect tab feature is optional within the Secure Digital Association guidelines. Some manufacturers claim that the write switch is easily broken, and do not include it on all their card models. [4] For writable cards, this is simply a matter of changing the molding of the outer shell so that the notch doesn't exist.
Some music and film media companies (e.g. Disney) have released limited catalogs of records and/or videos on SD. These usually contain DRM-encoded Windows Media files, making use of the SD format's DRM capabilities. Such media is usually permanently marked read-only, by adding the notch with no tab. These cards could be further protected (and possibly produced more cheaply) by manufacturing the card with true ROM rather than flash memory; it is not clear if any vendors have taken this approach.
File system
Like other flash card technologies, most SD cards ship preformatted with the FAT or FAT 32 file system. The ubiquity of this file system allows the card to be accessed on virtually any host device with an SD reader. Also, standard FAT maintenance utilities (e.g. ScanDisk) can be used to repair or retrieve corrupted data. However, because the card appears as a removable hard drive to the host system, the card can be reformatted to any file system supported by the operating system.
It is worth noting that while defragmentation utilities can be run against an SD card, there is no performance advantage in doing so (but see below on data recovery). Defragmentation is a process intended to optimize access to data on a drive with spinning platters and moving heads; however, since flash memory is truly random-access (a read to an adjacent cell is no faster than a read from any other cell), there is no performance gain. Further, the flash controller abstracts the physical memory location used for a given "sector", so that the host machine doesn't really know the layout of the data. Finally, as the defragmentation process moves data around, attempting to optimize it, a small portion of the flash memory's wear life is consumed.
However, note that any file recovery tool will struggle to recover files from highly fragmented data if the File Allocation Table becomes highly corrupted.
Speeds
There are different speed grades available which are measured with the same system as CD-ROMs, in multiples of 150 kB/s (1x = 150 kB/s). Basic cards transfer data up to six times (6x) the data rate of the standard CD-ROM speed (900 kB/s vs. 150 kB/s). High-speed cards are made with higher data transfer rates like 66x (10 MB/s), and high-end cards have speeds of 150x or higher. Note that maximum read speed and maximum write speed may be different, with maximum write speed typically lower than maximum read speed. Some digital cameras require high-speed cards (write speed) to record video smoothly or capture multiple still photographs in rapid succession. The SD card specification 1.01 allows for a maximum speed of 66x. Higher speeds of up to 150x are defined by specification 1.1.
The following table lists some common ratings and their respective maximum transfer rates.
Rating | Speed (MB/s) |
---|---|
6x | 0.9 |
32x | 4.8 |
40x | 6.0 |
66x | 10.0 |
133x | 20.0 |
150x | 22.5 |
Openness of standards
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/70/Sd_insides.jpg/220px-Sd_insides.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fd/SanDisk_128MB_SD_Card_Insides.jpg/220px-SanDisk_128MB_SD_Card_Insides.jpg)
Like most memory card formats, SD is covered by numerous patents (e.g. US patent 5602987) and trademarks.
There are three versions of the SD specification: 1.0, 1.1 and 2.0. These were originally only available after agreeing to a non-disclosure agreement (NDA) which prohibits the development of an open source driver, a fact that generates a fair amount of consternation in the open-source and free software communities. The system was eventually reverse-engineered though, and the non-DRMed sections of the memory cards could be accessed by free software drivers.
These days however, the SD Card Association (SDA) has made access to a simplified version of the specification under a less-restrictive licence.[5] Although most open-source drivers were written before this, it has helped them to solve some compatibility issues.
In 2006, the SD Card Association also released a simplified version of their host controller interface specification (not to be confused with the physical specification, which covers the actual cards and their protocol).[6] Like the physical specification, most of the information had already been discovered before the public release[7] and at least Linux had a fully free driver for it. Still, building a chip conforming to this specification caused the One Laptop Per Child project to claim "the first truly Open Source SD implementation, with no need to obtain an SDI license or sign NDAs to create SD drivers or applications."[8]
For the most part, the lack of complete, open SD specifications mainly affects embedded systems, since desktop users generally read SD cards via USB-based card readers. These card readers present a standard USB mass storage interface to memory cards, thus separating the operating system from the details of the underlying SD interface. However, embedded systems (such as portable music players) usually access SD cards directly, and therefore complete programming information is necessary. Desktop card readers are themselves examples of such embedded systems; the manufacturers of these readers have usually paid the SDCA for complete access to the SD specifications. Many notebook computers now include SD card readers not based on USB; device drivers for these essentially access the SD card directly, as in embedded systems.
Technical explanation
SD supports at least three transfer modes:
- One-bit SD mode (separate command and data channels and a proprietary transfer format)
- Four-bit SD mode (uses extra pins plus some reassigned pins)
- SPI mode (basically, a simpler subset of the SD protocol for use with microcontrollers)
All memory cards must support all three modes, except for microSD where SPI is optional. The cards must also support clock frequencies of up to 25 MHz for regular cards, and 50 MHz for high-speed cards.
Royalties for SD/SDIO licenses are imposed for manufacture and sale of memory cards and host adapters (1000 USD per year plus membership at 1500 USD/year) but SDIO cards can be made without royalties and MMC host adapters do not require a royalty. MMCs have a seven-pin interface; SD and SDIO have expanded this to nine pins and MMC Plus expands this even further with thirteen pins.
DRM features
The digital rights management scheme embedded in the SD cards is defined as the Content Protection for Recordable Media (CPRM) by the 4C Entity and is centered around use of the Cryptomeria cipher (also known as C2). The specification is kept secret and is only accessible to licensees. DVD-Audio uses a very similar scheme known as Content Protection for Prerecorded Media (CPPM). This type of DRM is associated with SDMI, an organisation set up by the RIAA to promote such hardware-based copy protection schemes. Many SD cards are marked on the packaging as being 'SDMI Compliant' for this reason. This DRM has not been seen "in the wild" and few, if any, devices appear to provide support for it.
Super*Talent, a manufacturer of computer memory, has created the "Super Digital" card. They are the same in appearance and function to regular Secure Digital cards, but they lack the CPRM code commonly found in Secure Digital cards. [9]
Compared to other flash memory formats
Overall, SD is less open than CompactFlash or USB flash memory drives, which can be implemented for free but require licensing fees for the associated logos and trademarks.
However, SD is much more open than Memory Stick, for which no public documentation nor any documented legacy implementation is available. All SD cards can, at least, be accessed freely using the well-documented SPI/MMC mode.
xD cards are simply 18-pin NAND flash chips in a special package, and support the standard command set for raw NAND flash access. Although the raw hardware interface to xD cards is well-understood, the layout of its memory contents--necessary for interoperability with xD card readers and digital cameras--is totally undocumented. The consortium that licenses xD cards has not released any publicly available technical information.
Different types of MMC/SD cards
The SD card is not the only flash memory card standard ratified by the Secure Digital Card Association. Other SD Card Association formats include miniSD, microSD (formerly known as TransFlash before ratification by the SD Card Association), and SDHC (Secure Digital High Capacity, for capacities above 4 GB - although, there are cards some readers can't handle over 1 GB that are not SDHC). SDHC is not fully compatible with the format that it extends, in that SD devices that do not specifically support SDHC will not work with the newer cards.
These smaller miniSD and microSD cards are usable in full size MMC/SD/SDIO slots with an adapter (which must route the electrical connections as well as making physical contact). It should be noted, however, that it is already difficult to create I/O devices in the SD form factor and this will be even more difficult in the smaller sizes. However, a WiFi card for mini-SDIO is already available from Spectec[10].
As SD slots still support MMCs, the separately-evolved smaller MMC variants are also compatible with SD-supporting devices. Unlike miniSD and microSD (which are sufficiently different from SD to make mechanical adapters necessary), RS-MMC slots maintain backward compatibility with full-sized MMCs, because the RS-MMCs are simply shorter MMCs. More information on these variants can be found in the article about the MultiMediaCard standard.
It is also important to note, that unlike for data storage (which typically works everywhere an SD slot is present), an SDIO device must be supported and equipped with drivers and applications for the host system and usually doesn't work outside of the manufacturer's scope (which means, for example, that an HP SDIO camera usually does not work with PDAs for which it is not listed as an accessory). This behavior is often not expected by end users (who expect that only the SD slot is required) and is similar to compatibility problems among Bluetooth devices.
Most, possibly all, current MMC flash memory cards support SPI mode even if not officially required as failure to do so would severely affect compatibility. All cards currently made by SanDisk, Ritek/Ridata, and Kingmax digital appear to support SPI. Also, MMCs may be electrically identical to SD cards but in a thinner package and with an electronic fuse blown to disable SD functionality (so no SD royalties need to be paid). Some MicroSD cards do not support SPI mode.
MMC defined the SPI and one-bit MMC/SD protocols. The underlying SPI protocol has existed for years as a standard feature on many microcontrollers. From a societal perspective, the justification for a new incompatible SD/MMC protocol is questionable; the development of a new incompatible and unnecessary protocol may help trade associations collect licensing and membership fees but it raises the cost of hardware and software in many ways. The new protocol used open collector signaling to allow multiple cards on the same bus but this actually causes problems at higher clock rate. While SPI used three shared lines plus a separate chip select to each card, the new protocol allows up to 30 cards to be connected to the same three wires (with no chip select) at the expense of a much more complicated card initialization and the requirement that each card have a unique serial number for plug and play operation; this feature is rarely used and its use is actively discouraged in new standards (which recommend a completely separate channel to each card) because of speed and power consumption issues. The quasi-proprietary one-bit protocol was extended to support four bit wide (SD and MMC) and eight bit (MMC only) transfers for more speed while much of the rest of the computer industry is moving to higher speed narrower channels; standard SPI could simply have been clocked at higher data rates (such as 133 MHz) for higher performance than offered by four-bit SD — embedded CPUs that did not already have higher clock rates available would not have been fast enough to handle the higher data rates anyway. The SD card association dropped support for some of the old one-bit MMC protocol commands and added support for additional commands related to copy protection.
Compatibility issues with 2 GB and larger cards
Devices that use SD cards identify the card by requesting a 128-bit identification string from the card. For standard-capacity SD cards, 12 of the bits are used to identify the number of memory clusters (ranging from 1 to 4096) and 3 of the bits are used to identify the number of blocks per cluster (which decode to 4, 8, 16, 32, 64, 128, 256 or 512 blocks per cluster).
In older 1.x implementations the standard capacity block was exactly 512 bytes. This gives 4096 x 512 x 512 = 1 gigabyte of storage memory. A later revision of the 1.x standard allowed a 4-bit field to indicate 1024 or 2048 bytes per block instead, yielding more 1 gigabyte of memory storage. Devices designed before this change may incorrectly identify such cards. Usually by misidentify a card with lower capacity than is the case by assuming 512 bytes per block rather than 1024 or 2048.
For the new SDHC high capacity card (2.0) implementation, 22 bits of the identification string are used to indicate the memory size in increments of 512 KBytes. Currently 16 of the 22 bits are allowed to be used, giving a maximum size of 32 GB. All SDHC 4-GB and larger cards must be 2.0 implementations. Two bits that were previously reserved and fixed at 0 are now used for identifying the type of card, 0=standard, 1=HC, 2=reserved, 3=reserved. Non-HC devices are not programmed to read this code and therefore cannot correctly read the identification of the card.
All SDHC readers work with standard SD cards.[11]
Many older devices will not accept the 2 or 4 GB size even though it is in the revised standard. The following statement is from the SD association specification:
- "To make 2 GByte card, the Maximum Block Length (READ_BL_LEN=WRITE_BL_LEN) shall be set to 1024 bytes. However, the Block Length, set by CMD16, shall be up to 512 bytes to keep consistency with 512 bytes Maximum Block Length cards (Less than and equal 2 Gbyte cards)."[12]
SD (non-SDHC) cards with 4 GB capacity
While the SD Card Association's current specifications limit the capacity of a standard SD card to 2 GB, it is possible to create a 4 GB SD (non-SDHC) card. While not strictly adhering to the standard, it should be readable in many SD 1.01 devices due to its adherence with most aspects of the specification.
According to the specification[13], the maximum capacity of a standard SD card is defined by (BLOCKNR x BLOCK_LEN), where BLOCKNR may be (4096 x 512) and BLOCK_LEN may be up to 2048. This would allow a theoretical capacity of 4 GB.
SDHC cards with greater than 32 GB capacity
Similarly to the above, as of version 2.00 of the specification[14], the capacity of a SDHC card is limited to 32 GB. However, while not strictly adhering to that standard, it is possible to create SDHC cards of up to 2048 GB capacity.
SDHC
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ac/SDHC_memory_card_-_8GB.jpeg/200px-SDHC_memory_card_-_8GB.jpeg)
SDHC (Secure Digital High Capacity, SD 2.0) is an extension of the SD standard that appeared in June 2006.[15] SDHC allows standard-compliant capacities in excess of 2 GB. SDHC cards are often formatted with the FAT32 file system, which supports partition sizes greater than 4 GB. [16] It uses the same form factor as SD, but the SD 2.0 standard in SDHC uses a different memory addressing method (sector addressing vs byte addressing), thus theoretically reaching a maximum capacity of up to 2048 GB. However the SD Card association have artificially defined the maximum limit of SDHC capacity to 32 GB. SDHC cards only work in SDHC compatible devices, but standard SD cards work in both SD and SDHC devices. The SDHC trademark is licensed to ensure compatibility. [17]
SDHC cards have SD Speed Class Ratings defined by the SD Association. The SD Speed Class Ratings specify the following minimum write speeds based on "the best fragmented state where no memory unit is occupied":[18]
- Class 2: 2 MB/s
- Class 4: 4 MB/s
- Class 6: 6 MB/s
SDHC cards will often also advertise a maximum speed (such as 133x or 150x) in addition to this minimum Speed Class Rating. See section Speeds above for a further explanation. One critical difference between the Speed Class the maximum speed ratings is the ability of the host device to query the SD card for the speed class and determine the best location to store data that meets the performance required. "Maximum speed" ratings are unofficial and have no formal evaluation process.
SD and SDHC compatibility issues
As of early 2007, the simultaneous availability of non-standard 4 GB SD and of standards-compliant 4 GB SDHC cards, and incompatibilities between SD and SDHC have caused confusion among consumers buying memory devices.
SD and SDHC cards and devices have these compatibility issues :
- Devices that do not specifically support SDHC do not recognize SDHC memory cards.
- Some manufacturers have produced 4 GB SD cards that conform to neither the SD2.0/SDHC spec nor existing SD devices. [19]
- File System: SD cards are typically formatted with the FAT16 file system, while SDHC cards are typically formatted as FAT32. [20] However, both types of cards can support other general-purpose filesystems, such as UFS2/ext2 for example.
SDIO
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/04/HP_PhotoSmart_SDIO_Kamera.jpg/220px-HP_PhotoSmart_SDIO_Kamera.jpg)
SDIO stands for Secure Digital Input Output.
SD slots can actually be used for more than flash memory cards. Devices that support SDIO (typically PDAs like the Palm Treo, but occasionally laptops or cell phones) can use small devices designed for the SD form factor, like GPS receivers, Wi-Fi or Bluetooth adapters, modems, Ethernet adapters, barcode readers, IrDA adapters, FM radio tuners, TV tuners, RFID readers, digital cameras, or other mass storage media such as hard drives.
A number of other devices have been proposed but not yet implemented, including RS-232 serial adapters, fingerprint scanners, SDIO to USB host/slave adapters (which would allow an SDIO-equipped handheld device to use USB peripherals and/or interface to PCs), magnetic strip readers, combination Bluetooth/Wi-Fi/GPS transceivers, cellular modems (PCS, CDPD, GSM, etc.), and APRS/TNC adapters.
SDIO cards are fully compatible with SD Memory Card host controller (including mechanical, electrical, power, signaling and software). When an SDIO card is inserted into a non SDIO-aware host, it will cause no physical damage or disruption to device or host controller. SPI bus topology is mandatory for SDIO, unlike SD Memory. Most of the SD Memory commands are not supported in SDIO. SDIO cards can contain 8 separate logical cards, though at the moment this is at most a memory and IO function. SD slots will only take SD cards. SDIO slots will take SD cards and SDIO cards.
SD cards with extra features
Various manufacturers have tried to make their SD cards stand out from the crowd in different ways
- SD Plus is a type of SD card made by Sandisk that has an integrated USB connector so it can be plugged directly into a USB port without needing any special card reader. [21] This concept has proven successful and other companies started introducing similar designs branded as duo SD.
- Capacity Display in 2006 A-DATA announced an SD card with its own digital display that would show how much free space is left on the card. [22]
- Eye-Fi, Inc. produces an SD card with Wi-Fi capability built in for 802.11g, 802.11b and backwards-compatible 802.11n wireless networks and supporting static WEP 40/104/128, WPA-PSK, WPA2-PSK security standards. The card works with any digital camera with an SD slot and can send captured images directly to a Windows PC or Apple computer wirelessly, where they can be automatically uploaded to web sites such as Flickr.com. When not in range of a wireless network connection, the card makes use of its 2GB capacity (EYE-FI-2GB model) until the images can be transferred. [23]
Market penetration
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b1/Canon_HF100_with_PQI_SDHC_card_20080610.jpg/250px-Canon_HF100_with_PQI_SDHC_card_20080610.jpg)
Secure Digital cards are used as storage media in these devices:
- Digital cameras for storing pictures
- Camcorders for storing still images and video clips
- PDAs for storing all kinds of data
- Mobile phones for storing images, sound clips and other media files - These devices tend to use smaller variants such as MicroSD and MiniSD
- Digital audio players
- Several game consoles:
- Nintendo Wii console for storing multimedia and game save files.
- Third-party homebrew devices for Nintendo DS for storing games, multimedia, and game save files.
- Higher-end models of the Sony PlayStation 3 for storing multimedia and game save files.
- GP2X GNU/Linux based portable games console.
- Pandora (console) Upcoming GNU/Linux based portable games console using the OMAP platform.
- Digital audio broadcasting radios
- Global Positioning System receivers, for storing map and waypoint data, as well as digital photos and audio.
- Numerous digital picture frames
- PCs with built-in memory card readers. Such readers are usually connected internally via the Universal Serial Bus (USB).
- Many laptop computers come with an integrated SD card reader while some also read other types of cards.
- Amazon.com's Kindle handheld eBook reader to store additional files for reading.
- Panasonicplasma TVs have a built-in SD card reader to display images
- Many car stereo head units now include an SD slot for playing MP3, WMA, and other digital audio formats.
- Keychain-sized USB-based SD readers are available, allowing an SD (or in some cases miniSD or microSD) card to be used in the same manner as a USB flash drive.
- Pleo Robots for upgrading the robot
Compact digital cameras
SD/MMC cards have replaced Toshiba's SmartMedia as the dominant memory card format used in compact digital cameras. In 2001 SmartMedia had achieved nearly 50% use, but by 2005 SD/MMC had achieved over 40% of the digital camera market and SmartMedia’s share had plummeted, with cards not being easily available in 2007.
A majority of the world’s leading digital camera manufacturers use SD in their product lines, including Casio, Canon, Nikon, Pentax, Kodak, Panasonic and Konica Minolta. Two major brands, however, have stuck to their own proprietary formats in their cameras: Olympus using xD cards, and Sony using Memory Stick. Fuji prior to 2007 also used xD cards exclusively, but has added SD functionality to all of their models since then.
Digital SLR cameras
SD has not conquered the market for Digital SLR cameras. In this market CompactFlash remains the most popular format due to its historically lower price/capacity ratio, better read/write performance, and the availability of larger capacities. The larger physical size of the CompactFlash is also not an issue in the generally large SLR cameras as it may be in compact cameras.
As of 2007, however, an increasing number of models use SD/MMC/SDHC cards exclusively: Pentax's complete line since the 2004 *istDS; Nikon's 2005 D50, 2006 D40, 2006 D80, 2007 D40X, and 2008 Nikon D60; and most recently Canon's 2008 EOS 450D/Rebel XSi.
Several high-end professional DSLRs — notably Canon's EOS-1Ds Mark III and EOS-1D Mark III — support both CompactFlash and SD for greater flexibility and storage capacity.
See also
References
- ^ dramexchange.com/WeeklyResearch/Post/1/492.aspx "A look into how SDHC will affect the future Nand Flash market". DRAMeXchange. 2006-12-05. Retrieved 2008-05-13.
{{cite web}}
: Check|url=
value (help) - ^ pocketpccentral.net "Pocket PC Users steer clear of SDHC... For Now". Pocket PC Central Press. 2006-07-18. Retrieved 2008-05-13.
{{cite web}}
: Check|url=
value (help) - ^ See Comparison of memory cards.
- ^ kingmaxdigi.com, Kingmax FAQ 2006
- ^ Sharp Linux PDA promotes use of proprietary SD card, but more open MMC works just fine
- ^ Simplified SD Host Controller Spec from the SDA's website
- ^ Reverse-engineered register information for the standard host controller
- ^ OLPC mailing list archive
- ^ Super Talent Technology - DDR and DDR2 Memory
- ^ Spectec's WiFi SDIO products
- ^ SD Compatibility, CARDSPEED - Card Readers and Memory Cards, December 1, 2006
- ^ SD Group Technical Committee (September 25, 2006). "Section 4: SD Memory Card Functional Description; 4.3.2: 2 Gbyte Card". SD Specifications, Part 1: Physical Layer Simplified Specification (PDF, HTML) (Version 2.00 ed.). SD Card Association. pp. p. 19. Retrieved 2007-02-23.
{{cite book}}
:|pages=
has extra text (help); Check date values in:|date=
(help); External link in
(help)|format=
- ^ "Simplified Physical Layer Specification v2.00". SD Card Association Website. 2006-09-26. p. 92. Retrieved 2008-07-01.
- ^ "Simplified Physical Layer Specification v2.00". SD Card Association Website. 2006-09-26. Retrieved 2008-07-01.
- ^ A look into how SDHC will affect the future Nand Flash market. DRAMeXchange, December 2006
- ^ SDHC file system
- ^ What are SDHC, miniSDHC, and microSDHC? SanDisk.com
- ^ About SD speed class SDCard.org
- ^ Techgage review, including an OCZ 4 GBan OCZ 4 GB SD (non-SDHC) card
- ^ http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
- ^ http://www.theregister.co.uk/2005/07/25/review_sandisk_ultra_ii_sd_plus/
- ^ I4U News - A DATA Announces SD Card w/ Bi-stable Capacity Display
- ^ Eye-Fi » Home
External links
- MyMemory.com, SD Card Brands and Information
- maxim-ic.com, Maxim Semiconductor app note describing SD with source code
- mmca.org, MultiMedia Card Association
- sandisk.com, SanDisk SD Card Product Manual 1.9 This is no longer available, but you can get it from cs.ucr.edu (v1.9)
- sandisk.com, SanDisk memory card device compatibility lookup
- sdcard.org, SD Memory Card Physical Layer Specification, version 1.01 (pdf)
- sdcard.org, Simplified SDIO Card Specification
- sdcard.org, Simplified Physical Layer Specification Useful info on the differences of SD vs. SDHC
- gadgetspage.com, Understanding SD Card Speeds
- k9spud.com, Interfacing dsPIC30F4013 to SD Cards
- pinouts.ru, Secure Digital connector pinout and signals
- sdcard.org, SD Card Association
- embwise.com, SD/SDIO Operating System independent Bus Driver
- hjreggel.net, Comparison of practically all Memory CARDS
- elm-chan.org, How to Use an MMC
- memorybits.co.uk, SD Gaming Card Primer
- eeproductcenter.com, SD/SDHC controller for mobile devices from Cypress Semiconductor Corp