x86-64
x86-64 is a superset of the x86 instruction set architecture. Therefore, x86-64 processors can run existing 32-bit or 16-bit x86 programs without sacrificing speed or compatibility, and in addition, they support new programs written in an extended instruction set, which features a 64-bit address space and other capabilities.
The x86-64 specification was designed by Advanced Micro Devices (AMD), who have since renamed it AMD64. The first family of processors to support the architecture was the AMD K8 family of processors. This was the first time any company other than Intel made significant additions to the x86 architecture. Intel was forced to follow suit, introducing modified NetBurst family processors, initially referred to as "IA-32e" or "EM64T" and now called Intel 64 and almost identical to AMD64. x86-64 is backwards compatible with 32-bit code without any performance loss. For example, The Developers Manuals available from Intel on the IA-32 architecture refer to IA-32 and IA-32e in tandem.[1] AMD licensed its x86-64 design to Intel, where it is marketed under the name Intel 64 (formerly EM64T). AMD's design replaced earlier attempts by Intel to design its own x86-64 extensions which had been referred to as IA-32e. As Intel licenses AMD the right to use the original x86 architecture (upon which AMD's x86-64 is based), these rival companies now rely on each other for 64-bit processor development. This has led to a case of mutually assured destruction should either company revoke its respective license.[2] Should such a scenario take place, AMD would no longer be authorized to produce any x86 processors, and Intel would no longer be authorized to produce x86-64 processors, forcing it back to the now-obsolete 32-bit x86 architecture. The last processors Intel manufactured which did not use AMD's x86-64 design were early versions of the desktop Pentium 4 "Prescott", introduced in February 2004, and mobile Intel Core introduced in January 2006.
VIA Technologies, another producer of x86 processors, have also included x86-64 instructions in their VIA Isaiah architecture used in VIA Nano. The terms x86-64 and x64 are often used as vendor-neutral terms to collectively refer to x86-64 processors from any company.
The x86-64 specification is distinct from the Intel Itanium (formerly IA-64) architecture, which is not compatible on the native instruction set level with either the x86 or x86-64 architectures.
AMD64
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/1a/AMD64_Logo.svg/150px-AMD64_Logo.svg.png)
The AMD64 instruction set is implemented in AMD's Athlon 64, Athlon 64 FX, Athlon 64 X2, Phenom, Phenom II, Athlon X2, Turion 64, Turion 64 X2, Opteron and later Sempron processors.
History of AMD64
AMD64 was created as an alternative to Intel and Hewlett Packard's radically different IA-64 architecture. Originally announced as "x86-64" in August 2000,[3] the architecture was positioned by AMD from the beginning as an evolutionary way to add 64-bit computing capabilities to the existing x86 architecture, as opposed to Intel's approach of creating an entirely new 64-bit architecture with IA-64.
The first AMD64-based processor, the Opteron, was released in April 2003.
Architectural features
The primary defining characteristic of AMD64 is the availability of 64-bit general purpose registers, i.e. rax, rbx etc., 64-bit integer arithmetic and logical operations, and 64-bit virtual addresses. The designers took the opportunity to make other improvements as well. The most significant changes include:
- 64-bit integer capability: All general-purpose registers (GPRs) are expanded from 32 bits to 64 bits, and all arithmetic and logical operations, memory-to-register and register-to-memory operations, etc. can now operate directly on 64-bit integers. Pushes and pops on the stack are always in 8-byte strides, and pointers are 8 bytes wide.
- Additional registers: In addition to increasing the size of the general-purpose registers, the number of named general-purpose registers is increased from eight (i.e. eax,ebx,ecx,edx,ebp,esp,esi,edi) in x86-32 to 16 (i.e. rax,rbx,rcx,rdx,rbp,rsp,rsi,rdi,r8,r9,r10,r11,r12,r13,r14,r15). It is therefore possible to keep more local variables in registers rather than on the stack, and to let registers hold frequently accessed constants; arguments for small and fast subroutines may also be passed in registers to a greater extent. However, AMD64 still has fewer registers than many common RISC processors (which typically have 32–64 registers) or VLIW-like machines such as the IA-64 (which has 128 registers).
- Additional XMM (SSE) registers: Similarly, the number of 128-bit XMM registers (used for Streaming SIMD instructions) is also increased from 8 to 16.
- Larger virtual address space: Current processor models implementing the AMD64 architecture can address up to 256 TB (248 or 281,474,976,710,656 bytes)[4] of virtual address space. This limit can be raised in future implementations to 16 EB (264 or 18,446,744,073,709,551,616 bytes). This is compared to just 4 GB (232 or 4,294,967,296 bytes) for 32-bit x86. This means that very large files can be operated on by mapping the entire file into the process' address space (which is sometimes faster than working with file read/write calls), rather than having to map regions of the file into and out of the address space.
- Larger physical address space: Current implementations of the AMD64 architecture can address up to 1 TB (240 or 1,099,511,627,776 bytes) of RAM; the architecture permits extending this to 4 PB (252 or 4,503,599,627,370,496 bytes) in the future (limited by the page table entry format). In legacy mode, Physical Address Extension (PAE) is included, as it is on most current 32-bit x86 processors, allowing access to a maximum of 64 GB (236 or 68,719,476,736 bytes).
- Instruction pointer relative data access: Instructions can now reference data relative to the instruction pointer (RIP register). This makes position independent code, as is often used in shared libraries and code loaded at run time, more efficient.
- SSE instructions: The original AMD64 architecture adopted Intel's SSE and SSE2 as core instructions. SSE3 instructions were added in April 2005. SSE2 replaces the x87 instruction set's IEEE 80-bit precision with the choice of either IEEE 32-bit or 64-bit floating-point mathematics. This provides floating-point operations compatible with many other modern CPUs. The SSE and SSE2 instructions have also been extended to operate on the eight new XMM registers. SSE and SSE2 are available in 32-bit mode in modern x86 processors; however, if they're used in 32-bit programs, those programs will only work on systems with processors that have the feature. This is not an issue in 64-bit programs, as all AMD64 processors have SSE and SSE2, so using SSE and SSE2 instructions instead of x87 instructions does not reduce the set of machines on which x64 programs can be run. SSE and SSE2 are generally faster than, and duplicate most of the features of the traditional x87 instructions, MMX, and 3DNow!.
- No-Execute bit: The "NX" bit (bit 63 of the page table entry) allows the operating system to specify which pages of virtual address space can contain executable code and which cannot. An attempt to execute code from a page tagged "no execute" will result in a memory access violation, similar to an attempt to write to a read-only page. This should make it more difficult for malicious code to take control of the system via "buffer overrun" or "unchecked buffer" attacks. A similar feature has been available on x86 processors since the 80286 as an attribute of segment descriptors; however, this works only on an entire segment at a time. Segmented addressing has long been considered an obsolete mode of operation, and all current PC operating systems in effect bypass it, setting all segments to a base address of 0 and a size of 4 GB (4,294,967,296 bytes). AMD was the first x86-family vendor to implement no-execute in linear addressing mode. The feature is also available in legacy mode on AMD64 processors, and recent Intel x86 processors, when PAE is used.
- Removal of older features: A number of "system programming" features of the x86 architecture are not used in modern operating systems and are not available on AMD64 in long (64-bit and compatibility) mode. These include segmented addressing (although the FS and GS segments are retained in vestigial form for use as extra base pointers to operating system structures)[5], the task state switch mechanism, and Virtual 8086 mode. These features do of course remain fully implemented in "legacy mode," thus permitting these processors to run 32-bit and 16-bit operating systems without modification.
Virtual address space details
Although virtual addresses are 64 bits wide in 64-bit mode, current implementations (and any chips known to be in the planning stages) do not allow the entire virtual address space of 16 EB (18,446,744,073,709,551,616 bytes) to be used. Most operating systems and applications will not need such a large address space for the foreseeable future (for example, Windows implementations for AMD64 are only populating 16 TB (17,592,186,044,416 bytes), or 44 bits' worth), so implementing such wide virtual addresses would simply increase the complexity and cost of address translation with no real benefit. AMD therefore decided that, in the first implementations of the architecture, only the least significant 48 bits of a virtual address would actually be used in address translation (page table lookup). However, bits 48 through 63 of any virtual address must be copies of bit 47 (in a manner akin to sign extension), or the processor will raise an exception. Addresses complying with this rule are referred to as "canonical form." Canonical form addresses run from 0 through 00007FFF`FFFFFFFF, and from FFFF8000`00000000 through FFFFFFFF`FFFFFFFF, for a total of 256 TB (281,474,976,710,656 bytes) of usable virtual address space.
This "quirk" allows an important feature for later scalability to true 64-bit addressing: many operating systems (including, but not limited to, the Windows NT family) take the higher-addressed half of the address space (named kernel space) for themselves and leave the lower-addressed half (user space) for application code, user mode stacks, heaps, and other data regions. The "canonical address" design ensures that every AMD64 compliant implementation has, in effect, two memory halves: the lower half starts at 00000000`00000000 and "grows upwards" as more virtual address bits become available, while the higher half is "docked" to the top of the address space and grows downwards. Also, fixing the contents of the unused address bits prevents their use by operating system as flags, privilege markers, etc., as such use could become problematic when the architecture is indeed extended to 52, 56, 60 and 64 bits.
Current 48-bit implementation | 56-bit implementation | Full 64-bit implementation |
(not drawn to scale) |
The 64-bit addressing mode ("long mode") is a superset of Physical Address Extensions (PAE); because of this, page sizes may be 4 KB (4096 bytes), 2 MB (2,097,152 bytes), or 1 GB (1,073,741,824 bytes). However, rather than the three-level page table system used by systems in PAE mode, systems running in long mode use four levels of page table: PAE's Page-Directory Pointer Table is extended from 4 entries to 512, and an additional Page-Map Level 4 Table is added, containing 512 entries in 48-bit implementations. In implementations providing larger virtual addresses, this latter table would either grow to accommodate sufficient entries to describe the entire address range, up to a theoretical maximum of 33,554,432 entries for a 64-bit implementation, or be over ranked by a new mapping level, such as a PML5. A full mapping hierarchy of 4 KB (4096 bytes) pages for the whole 48-bit space would take a bit more than 512 GB (549,755,813,888 bytes) of RAM (about 0.196% of the 256 TB [281,474,976,710,656 bytes] virtual space).
Operating modes
Operating mode | Operating system required | Compiled-application rebuild required | Default address size | Default operand size | Register extensions | Typical GPR width | |
---|---|---|---|---|---|---|---|
Long mode | 64-bit mode | OS with 64-bit support | Yes | 64 | 32 | Yes | 64 |
Compatibility mode | No | 32 | 32 | No | 32 | ||
16 | 16 | 16 | |||||
Legacy mode | Protected mode | Legacy 16-bit or 32-bit OS | No | 32 | 32 | No | 32 |
16 | 16 | 16 | |||||
Virtual 8086 mode | 16 | 16 | 16 | ||||
Real mode | Legacy 16-bit OS |
Operating mode explanation
The architecture has two primary modes of operation:
- Long mode
- The architecture's intended primary mode of operation; it is a combination of the processor's native 64-bit mode and a combined 32-bit and 16-bit compatibility mode. It is used by 64-bit operating systems. Under a 64-bit operating system, 64-bit, 32-bit and 16-bit (or 80286) protected mode applications may be run.
- Since the basic instruction set is the same, there is almost no performance penalty for executing x86 code. This is unlike Intel's IA-64, where differences in the underlying ISA means that running 32-bit code must be done either in emulation of x86 (making the process slower) or with a dedicated x86 core. However, on the x64 platform, 32-bit x86 applications may still benefit from a 64-bit recompile, due to the additional registers in 64-bit code, which a compiler can use for optimization.
- Legacy mode
- The mode used by 16-bit (protected mode or real mode) and 32-bit operating systems. In this mode, the processor acts just like an x86 processor, and only 16-bit or 32-bit code can be executed. 64-bit programs will not run.
AMD64 Implementations
The following processors implement the AMD64 architecture:
- AMD Athlon 64
- AMD Athlon 64 X2
- AMD Athlon 64 FX
- AMD Opteron
- AMD Turion 64
- AMD Turion 64 X2
- AMD Sempron ("Palermo" E6 stepping and all "Manila" models)
- AMD Phenom, often followed by X3 or X4 to indicate the number of cores.
- AMD Phenom II, (45 nm) often followed by X3 or X4 to indicate the number of cores.
Intel 64
Intel 64 is Intel's implementation of x86-64. It is used in newer versions of Pentium 4, Pentium D, Pentium Extreme Edition, Celeron D, Xeon and Pentium Dual-Core processors, and in all versions of the Core 2, and Intel Core i7 processors.
History of Intel 64
Historically, AMD has developed and produced processors patterned after Intel's original designs, but with x86-64, roles were reversed: Intel found itself in the position of adopting the architecture which AMD had created as an extension to Intel's own x86 processor line.
Intel's project was originally codenamed Yamhill (after the Yamhill River in Oregon's Willamette Valley). After several years of denying its existence, Intel announced at the February 2004 IDF that the project was indeed underway. Intel's chairman at the time, Craig Barrett, admitted that this was one of their worst kept secrets.[6][7]
Intel's name for this technology has changed several times. The name used at the IDF was CT (presumably for Clackamas Technology, another codename from an Oregon river); within weeks they began referring to it as IA-32e (for IA-32 extensions) and in March 2004 unveiled the "official" name EM64T (Extended Memory 64 Technology). In late 2006 Intel began instead using the name Intel 64 for its implementation, paralleling AMD's use of the name AMD64.[8]
Intel 64 Implementations
Intel's first processor to activate the Intel 64 technology was the multi-socket processor Xeon code-named Nocona later in 2004. In contrast, the initial Prescott chips (February 2004) did not enable this feature. Intel subsequently began selling Intel 64-enabled Pentium 4s using the E0 revision of the Prescott core, being sold on the OEM market as the Pentium 4, model F. The E0 revision also adds eXecute Disable (XD) (Intel's name for the NX bit) to Intel 64, and has been included in then current Xeon code-named Irwindale. Intel's official launch of Intel 64 (under the name EM64T at that time) in mainstream desktop processors was the N0 Stepping Prescott-2M. All 9xx, 8xx, 6xx, 5x9, 5x6, 5x1, 3x6, and 3x1 series CPUs have Intel 64 enabled, as do the Core 2 CPUs, as will future Intel CPUs for workstations or servers. Intel 64 is also present in the last members of the Celeron D line.
The first Intel mobile processor implementing Intel 64 is the Merom version of the Core 2 processor, which was released on 27 July 2006. None of Intel's earlier notebook CPUs (Core Duo, Pentium M, Celeron M, Mobile Pentium 4) implements Intel 64.
The following processors implement the Intel 64 architecture:
- Intel NetBurst microarchitecture
- Intel Xeon (some models since "Nocona")
- Intel Celeron D (some models since "Prescott")
- Intel Pentium 4 (some models since "Prescott")
- Intel Pentium D
- Intel Pentium Extreme Edition
- Intel Core microarchitecture
- Intel Xeon (all models since "Woodcrest")
- Intel Core 2 (Including Mobile processors since "Merom")
- Intel Pentium Dual Core (E2140, E2160, E2180, E2200, E2220, E5200, T2310, T2330, T2370, and T2390)
- Intel Celeron (Celeron 4x0; Celeron M 5xx)
- Intel Atom microarchitecture
- Intel Atom 200 series (not to be confused with the N200 series, widely used in netbooks)
- Intel Atom 300 series
- Intel Nehalem microarchitecture
Other x86-64 implementations
- VIA Technologies Isaiah microarchitecture
Differences between AMD64 and Intel 64
There are a few differences between the two instruction sets. Compilers generally produce binaries that are compatible with both (that is, compatible with the subset of X86-64 that is common to both AMD64 and Intel 64), making these differences mainly of interest to developers of compilers and operating systems.
Recent implementations
- Intel 64's BSF and BSR instructions act differently when the source is 0 and the operand size is 32 bits. The processor sets the zero flag and leaves the upper 32 bits of the destination undefined.
- Intel 64 lacks the ability to save and restore a reduced (and thus faster) version of the floating-point state (involving the FXSAVE and FXRSTOR instructions).
- Intel 64 lacks some model-specific registers that are considered architectural to AMD64. These include SYSCFG, TOP_MEM, and TOP_MEM2.
- AMD64 requires a different microcode update format and control MSRs while Intel 64 implements microcode update unchanged from their 32-bit only processors.
- AMD64 originally lacked the MONITOR and MWAIT instructions, used by operating systems to better deal with Intel's Hyper-threading feature and also to enter specific low power states.
- AMD64 systems allow the use of the AGP aperture as an IOMMU. Operating systems can take advantage of this to let normal PCI devices DMA to memory above 4 GB. Intel 64 systems require the use of bounce buffers, which are slower.
- Intel 64 allows SYSCALL and SYSRET only in IA-32e mode (not in compatibility mode). It allows SYSENTER and SYSEXIT in both modes.
- AMD64 lacks SYSENTER and SYSEXIT in both sub-modes of long mode.
- Near branches with the 66H (operand size) prefix behave differently. Intel 64 clears only the top 32 bits, while AMD64 clears the top 48 bits.
- More recent AMD64 processors support 1GB pages.
- Intel CPUs based on the Conroe microarchitecture have two major performance bottlenecks: they don't use Intel's "Macrofusion" technology which allows for faster reading from the instruction (L1) cache; and they address the additional registers less efficiently than AMD processors. This leads to a performance degradation compared to AMD64 when some Core 2 Duo models are in long mode.[9]
Older implementations
- Early AMD64 processors lacked the CMPXCHG16B instruction, which is an extension of the CMPXCHG8B instruction present on most post-486 processors. Similar to CMPXCHG8B, CMPXCHG16B allows for atomic operations on 128-bit double quadword (or oword) data types. This is useful for parallel algorithms that use compare and swap on data larger than the size of a pointer, common in lock-free and wait-free algorithms. Without CMPXCHG16B one must use workarounds, such as a critical section or alternative lock-free approaches.[1]
- Early Intel CPUs with Intel 64 lacked LAHF and SAHF instructions available in AMD64 until introduction of Pentium 4 G1 step in December 2005. LAHF and SAHF are load and store instructions, respectively, for certain status flags. These instructions are used for virtualization and floating-point condition handling.
- Early Intel CPUs with Intel 64 also lack the NX bit (No Execute bit) of the AMD64 architecture. The NX bit marks memory pages as non-executable, allowing protection against many types of malicious code.
- Original AMD64 implementations allowed access only to 1 TB (1,099,511,627,776 bytes) of physical memory, however, recent AMD64 implementations now provide 256 TB (281,474,976,710,656 bytes) of physical address space (with planned expansion to 4 PB [4,503,599,627,370,496 bytes]).
- Original Intel 64 implementations allowed access only to 64 GB (68,719,476,736 bytes) of physical memory, however, recent Intel 64 implementations now provide 1 TB (1,099,511,627,776 bytes) of physical address space.
Operating system compatibility
The following operating systems and releases support the x86-64 architecture by running in long mode:
Windows
x64 editions of Microsoft Windows client and server, Windows XP Professional x64 Edition and Windows Server 2003 SP1 x64 Edition were released in March 2005. Internally they are actually the same build (5.2.3790.3959 SP2), as they share the same source base and operating system binaries, so even system updates are released in unified packages, much in the manner as Windows 2000 Professional and Server editions for x86. Windows Vista, which also has many different versions, was released in January 2007. Windows for x64 has the following characteristics:
- 8 TB (8,796,093,022,208 bytes) of "user mode" virtual memory address space per process. A 64-bit program can use all of this, subject of course to backing store limits on the system. This is a 4096-fold increase over the default 2 GB (2,147,483,648 bytes) user-mode virtual address space offered by 32-bit Windows.
- 8 TB (8,796,093,022,208 bytes) of kernel mode virtual address space for the operating system. Again, this is a 4096-fold increase over 32-bit Windows versions. The increased space is primarily of benefit to the file system cache and kernel mode "heaps" (non-paged pool and paged pool).
- Interestingly the total address space is limited to 16 TB (17,592,186,044,416 bytes) due to early AMD64 lacking a CMPXCHG16B instruction.[10]
- Ability to use up to 128 GB (137,438,953,472 bytes; Windows XP/Vista) or 1 TB (1,099,511,627,776 bytes; Windows Server 2003) of random access memory (RAM).
- LLP64 data model: "int" and "long" types are still 32 bits wide, while pointers and types derived from pointers are 64 bits wide.
- Kernel mode device drivers must be 64-bit versions; there is no way to run 32-bit kernel-mode executables within the 64-bit operating system. User mode device drivers can be either 32 bit or 64 bit.
- Ability to run existing 32-bit applications (.exe's) and dynamic link libraries (.dll's). A 32-bit program, if linked with the "large address aware" option, can use up to 4 GB (4,294,967,296 bytes) of virtual address space, as compared to the default 2 GB (2,147,483,648 bytes; optional 3 GB [3,221,225,472 bytes] with /3GB boot.ini option and "large address aware" link option) offered by 32-bit Windows.
- 16-bit DOS and Windows (Win16) applications will not run on x64 versions of Windows due to removal of NTVDM.
- Full implementation of the NX (No Execute) page protection feature. This is also implemented on recent 32-bit versions of Windows when they are started in PAE mode.
- Instead of FS segment descriptor on x86 versions of the Windows NT family, GS segment descriptor is used to point to two operating system defined structures: Thread Information Block (NT_TIB) in user mode and Processor Control Region (KPCR) in kernel mode. Thus, for example, in user mode GS:0 is the address of the first member of the Thread Information Block. Maintaining this convention made the x64 port easier, but required AMD to retain the function of the FS and GS segments in long mode — even though segmented addressing per se is not really used by any modern operating system.[11]
- Early reports claimed that the operating system scheduler would not save and restore the x87 FPU machine state across thread context switches. Observed behavior shows that this is not the case: the x87 state is saved and restored, except for kernel-mode-only threads (a limitation that exists in the 32-bit version as well). The most recent documentation available from Microsoft states that the x87/MMX/3DNow! instructions may be used in long mode.
- Some components like Microsoft Jet Database Engine and Data Access Objects will not be ported to 64-bit architectures such as x86-64 and IA-64.[12][13]
- Microsoft Visual Studio can compile native applications to target only the x86-64 architecture, that will run only on 64-bit Microsoft Windows, or the x86 architecture which will run as a 32-bit application on 32-bit Microsoft Windows or 64-bit Microsoft Windows in WoW64 emulation mode. Managed applications can be compiled either in x86, x86-64 or AnyCPU modes. While the first two modes behave like their x86 or x86-64 native code counterparts respectively, when using the AnyCPU mode, the applications runs as a 32-bit application in 32-bit Microsoft Windows or as a 64-bit application in 64-bit Microsoft Windows.
Linux
Linux was the first operating system kernel to run the x86-64 architecture in long mode, starting with the 2.4 version prior to the physical hardware's availability.[citation needed] Linux also provides backward compatibility for running 32-bit executables. This permits programs to be recompiled into long mode while retaining the use of 32-bit programs. Several Linux distributions currently ship with x86-64-native kernels and userlands. Some, such as SUSE, Mandriva and Debian GNU/Linux package both 32-bit and 64-bit systems on a single DVD-ROM image to allow automatic selection of the best software during installation. Other distributions, such as Fedora, Ubuntu, and Arch Linux are available in a version compiled for 32-bit and one compiled for x86-64 architecture.
64-bit Linux allows up to 128 TB (140,737,488,355,328 bytes) of address space for individual processes, and can address approximately 64 TB (70,368,744,177,664 bytes) of physical memory, subject to processor and system limitations.
Mac OS X
Mac OS X v10.5 supports 64-bit GUI applications using Cocoa, Quartz, OpenGL and X11 on 64-bit Intel-based machines, as well as on 64-bit PowerPC machines.[14] All non-GUI libraries and frameworks also support 64-bit applications on those platforms. The kernel is 32-bit.
Mac OS X uses an extension of the Universal binary format to package 32- and 64-bit versions of application and library code into a single file; the most appropriate version is automatically selected at load time.
Future: Mac OS X v10.6 Snow Leopard will be the first Apple OS to be able to run on a 64-bit kernel. Initial reports indicate that Snow Leopard has a "32-bit compatibility mode" to deal with applications that depend on a 32-bit kernel.[15]
Mac OS X v10.4.7 and higher versions of Mac OS X v10.4 run 64-bit command-line tools using the POSIX and math libraries on 64-bit Intel-based machines, just as all versions of Mac OS X v10.4 and higher run them on 64-bit PowerPC machines. No other libraries or frameworks work with 64-bit applications in Mac OS X v10.4.[16]
BSD
DragonFly BSD
Preliminary infrastructure work was started in February 2004 for a x86-64 port.[17] This development later stalled. Development started again during July 2007.[18] During Google Summer of Code 2008 development continued and will continue during SoC 2009.[19][20]
FreeBSD
FreeBSD first added x86-64 support under the name "amd64" as an experimental architecture in 5.1-RELEASE in June 2003. It was included as a standard distribution architecture as of 5.2-RELEASE in January 2004. Since then, FreeBSD has designated it as a Tier 1 platform. The 6.0-RELEASE version cleaned up some quirks with running 32-bit x86 executables under amd64, and most drivers work just as they do on 32-bit x86 architectures. Work is currently being done to integrate more fully the 32-bit x86 application binary interface (ABI), in the same manner as the Linux 32-bit ABI compatibility currently works.
NetBSD
x86-64 architecture support was first committed to the NetBSD source tree on 19 June 2001. As of NetBSD 2.0, released on 9 December 2004, NetBSD/amd64 is a fully integrated and supported port.
OpenBSD
OpenBSD has supported AMD64 since OpenBSD 3.5, released on 1 May 2004. Complete in-tree implementation of AMD64 support was achieved prior to the hardware's initial release due to AMD's loaning of several machines for the project's hackathon that year. OpenBSD developers have taken to the platform because of its use of the NX bit, which allowed for an easy implementation of the W^X feature.
The code for the AMD64 port of OpenBSD also runs on Intel 64 processors which contains cloned use of the AMD64 extensions, but since Intel left out the page table NX bit in early Intel 64 processors, there is no W^X capability on those Intel CPUs; later Intel 64 processors added the NX bit under the name "XD bit". Symmetric multiprocessing (SMP) works on OpenBSD's AMD64 port, starting with release 3.6 on 1 November 2004.
MenuetOS
The 64-bit version of MenuetOS (M64) was released in June 2005. Although MenuetOS was originally written for 32-bit x86 architectures and released under the GPL, the 64-bit version is proprietary. It is distributed as freeware with the source code for some components.
Solaris
Solaris 10 and later releases support the x86-64 architecture. Just as with the SPARC architecture, there is only one operating system image for all 32-bit and 64-bit x86 systems; this is labeled as the "x86/x64" DVD-ROM image.
Default behavior is to boot a 64-bit kernel, allowing both 64-bit and existing or new 32-bit executables to be run. A 32-bit kernel can also be manually selected, in which case only 32-bit executables will run. The isainfo
command can be used to determine if a system is running a 64-bit kernel.
DOS
It is possible to enter long mode under DOS without a DOS extender[21], but the user must return to real mode in order to call BIOS or DOS interrupts.
It may also be possible to enter long mode with a DOS extender similar to DOS/4GW, but more complex since x86-64 lacks virtual 8086 mode. DOS itself is not aware of that, and no benefits should be expected unless running DOS in an emulation with an adequate virtualization driver backend, for example: the mass storage interface.
Industry naming conventions
Since AMD64 and Intel 64 are substantially similar, many software and hardware products use one vendor-neutral term to indicate their compatibility with both implementations. AMD's original designation for this processor architecture, "x86-64", is still sometimes used for this purpose, as is the variant "x86_64".[22] Other companies, such as Microsoft and Sun Microsystems, use the contraction "x64" in marketing material.
Many operating systems and products, especially those that introduced x86-64 support prior to Intel's entry into the market, use the term "AMD64" or "amd64" to refer to both AMD64 and Intel 64.
- BSD systems such as FreeBSD, NetBSD and OpenBSD refer to both AMD64 and Intel 64 under the architecture name "amd64".
- Fedora PackageKit, openSUSE, and Arch Linux refers to 64-bit architecture as "x86_64".
- Java Development Kit (JDK): The name "amd64" is used in directory names containing x86-64 files.
- Mac OS X: Apple refers to 64-bit architecture as "x86_64", as noted with the Terminal command
arch
and in their developer documentation. [2]
- Microsoft Windows: x64 versions of Windows use the AMD64 moniker to designate various components which use 64-bit technology for IA-32 processors. For example, the system folder on a Windows x64 Edition installation CD-ROM is named "AMD64", in contrast to "i386" in 32-bit versions.
- Solaris: The "isalist" command in Sun's Solaris operating system identifies both AMD64- and Intel 64–based systems as "amd64".
See also
Notes and references
- ^ "AMD64 FAQs". AMD. Retrieved 2008-08-08.
AMD64 replaces terms such as [...] 'x86-64' (now 'AMD64 ISA').
- ^ "AMD plays antitrust poker for Intel's X86 licence". Incisive Media Limited. 2009-02-03. Retrieved 2009-02-26.
- ^ "AMD Releases x86-64 Architectural Specification; Enables Market Driven Migration to 64-Bit Computing" (Press release). AMD. August 10, 2000. Retrieved 2007-08-03.
- ^ Transistorized memory, such as RAM, ROM, flash and cache sizes as well as file sizes are specified using binary meanings for K (10241), M (10242), G (10243), etc.
- ^ "AMD64 Architecture Programmer's Manual Volume 2: System Programming" (pdf). pp. p. 70. Retrieved 2007-08-30.
{{cite web}}
:|pages=
has extra text (help) - ^ "Craig Barrett confirms 64 bit address extensions for Xeon. And Prescott", from The Inquirer
- ^ "A Roundup of 64-Bit Computing", from internetnews.com
- ^ "Intel 64 Architecture". Intel. Retrieved 2007-06-29.
- ^ http://www.xbitlabs.com/articles/cpu/display/core2duo-64bit_2.html
- ^ "Behind Windows x64's 44-bit Virtual Memory Addressing Limit".
- ^ "Everything You Need To Know To Start Programming 64-Bit Windows Systems".
On x64 versions of Windows, the FS register has been replaced by the GS register.
- ^ Microsoft Developer Network - General Porting Guidelines (64-bit Windows Programming)
- ^ Microsoft Developer Network - Data Access Road Map
- ^ Apple - Mac OS X Leopard - Technology - 64 bit
- ^ McLean, Prince (2009-08-26). "Road to Mac OS X 10.6 Snow Leopard: 64-Bits". AppleInsider. Retrieved 2009-03-22.
{{cite web}}
: Unknown parameter|month=
ignored (help)CS1 maint: date and year (link) - ^ Apple - Mac OS X Xcode 2.4 Release Notes: Compiler Tools
- ^
{{citation}}
: Empty citation (help) - ^
{{citation}}
: Empty citation (help) - ^
{{citation}}
: Empty citation (help) - ^
{{citation}}
: Empty citation (help) - ^ Tutorial for entering protected and long mode from DOS
- ^ Kevin Van Vechten (August 9, 2006). "re: Intel XNU bug report". Darwin-dev mailing list. Apple Computer. Retrieved 2006-10-05.
The kernel and developer tools have standardized on "x86_64" for the name of the Mach-O architecture
{{cite web}}
: Check date values in:|date=
(help)
External links
- AMD's free technical documentation for the AMD64 architecture
- AMD's AMD64 documentation on CD-ROM (U.S. and Canada only) and downloadable PDF format
- AMD64 Technology: Overview of the AMD64 Architecture (PDF)
- x86-64: Extending the x86 architecture to 64-bits - technical talk by the architect of AMD64 (video archive), and second talk by the same speaker (video archive)
- AMD's "Enhanced Virus Protection"
- Intel tweaks EM64T for full AMD64 compatibility
- Analyst: Intel Reverse-Engineered AMD64
- Early report of differences between Intel IA32e and AMD64
- Porting to 64-bit GNU/Linux Systems, by Andreas Jaeger from GCC Summit 2003 [3]. An excellent paper explaining almost all practical aspects for a transition from 32-bit to 64-bit.
- Tech Report article: 64-bit computing in theory and practice
- Intel 64 Architecture
- TurboIRC.COM tutorial of entering the protected and the long mode the raw way from DOS
- Optimization of 64-bit programs