Tungsten carbide
![]() Tungsten carbide drilling/milling bits
| |
Identifiers | |
---|---|
3D model (JSmol)
|
|
ECHA InfoCard | 100.031.918 |
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
WC | |
Molar mass | 195.851 g/mol |
Appearance | Grey-black lustrous solid |
Density | 15.63 g/cm3 |
Melting point | 2,870 °C (5,200 °F; 3,140 K) |
Boiling point | 6,000 °C (10,830 °F; 6,270 K) |
Insoluble | |
Structure | |
Hexagonal, hP2, space group = P6m2, No. 187[1] | |
Related compounds | |
Other anions
|
Tungsten boride Tungsten nitride |
Other cations
|
Molybdenum carbide Titanium carbide Silicon carbide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Tungsten carbide (WC) is an inorganic chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms. In its most basic form, tungsten carbide is a fine gray powder, but it can be pressed and formed into shapes for use in industrial machinery, cutting tools, abrasives, other tools and instruments, and jewelry.
Tungsten carbide is approximately three times stiffer than steel, with a Young's modulus of approximately 550 GPa,[2] and is much denser than steel or titanium. It is comparable with corundum (α-Al2O3) or sapphire in hardness and can only be polished and finished with abrasives of superior hardness such as cubic boron nitride and diamond, in the form of powder, wheels, and compounds.
Naming
Colloquially among workers in various industries (such as machining and carpentry), tungsten carbide is often simply called carbide (without precise distinction from other carbides). Among the lay public, the growing popularity of tungsten carbide rings has led to some consumers calling the material just tungsten, despite the inaccuracy of the usage.
Synthesis
WC can be prepared by reaction of tungsten metal and carbon at 1400–2000 °C.[3] Other methods include a patented lower temperature fluid bed process that reacts either tungsten metal or blue WO3 with CO/CO2 mixture and H2 between 900 and 1200 °C.[4]
WC can also be produced by heating WO3 with graphite: directly at 900 °C or in hydrogen at 670 °C following by carburization in Ar at 1000 °C.[5] Chemical vapor deposition methods that have been investigated include:[3]
- reacting tungsten hexachloride with hydrogen (as a reducing agent) and methane (as the source of carbon) at 670 °C (1,238 °F)
- WCl6 + H2 + CH4 → WC + 6 HCl
- reacting tungsten hexafluoride with hydrogen (as reducing agent) and methanol (as source of carbon) at 350 °C (662 °F)
- WF6 + 2 H2 + CH3OH → WC + 6 HF + H2O
Chemical properties
There are two well characterized compounds of tungsten and carbon, WC and tungsten semicarbide, W2C. Both compounds may be present in coatings and the proportions can depend on the coating method.[6]
At high temperatures WC decomposes to tungsten and carbon and this can occur during high-temperature thermal spray, e.g., in high velocity oxygen fuel (HVOF) and high energy plasma (HEP) methods.[7]
Oxidation of WC starts at 500–600 °C.[3] It is resistant to acids and is only attacked by hydrofluoric acid/nitric acid (HF/HNO3) mixtures above room temperature.[3] It reacts with fluorine gas at room temperature and chlorine above 400 °C (752 °F) and is unreactive to dry H2 up to its melting point.[3] WC dissolves readily in diluted hydrogen peroxide.[8]
Physical properties
Tungsten carbide has a high melting point at 2,870 °C (5,200 °F), a boiling point of 6,000 °C (10,830 °F) when under a pressure equivalent to 760mm of Hg,[9] a thermal conductivity of 84.02 W·m−1·K−1,[10] and a coefficient of thermal expansion of 5.8 µm·m−1·K−1.[11]
Tungsten carbide is extremely hard, ranking ~9 on Mohs scale, and with a Vickers number of 1700–2400.[12] It has a Young's modulus of approximately 550 GPa,[2] a bulk modulus of 439 GPa,[13] and a shear modulus of 270 GPa.[11] It has a ultimate tensile strength of 344.8 MPa.[14]
The speed of a longitudinal wave (the speed of sound) through a thin rod of tungsten carbide is 6220 m/s.[15]
With a low electrical resistivity of (~2×10−7 Ohm·m), tungsten carbide's resistivity is comparable with that of some metals (e.g. vanadium 2×10−7 Ohm·m).[3][16]
WC is readily wetted by both molten nickel and cobalt.[17] Investigation of the phase diagram of the W-C-Co system shows that WC and Co form a pseudo binary eutectic. The phase diagram also shows that there are so-called η-carbides with composition (W,Co)6C that can be formed and the fact that these phases are brittle is the reason why control of the carbon content in WC-Co hard metals is important.[17]
Structure
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f3/Alpha_tungsten_carbide_crystal_structure.png/220px-Alpha_tungsten_carbide_crystal_structure.png)
There are two forms of WC, a hexagonal form, α-WC (hP2, space group P6m2, No. 187),[1][18] and a cubic high-temperature form, β-WC, which has the rock salt structure.[19] The hexagonal form can be visualized as made up of hexagonally close packed layers of metal atoms with layers lying directly over one another, with carbon atoms filling half the interstices giving both tungsten and carbon a regular trigonal prismatic, 6 coordination.[18] From the unit cell dimensions[20] the following bond lengths can be determined; the distance between the tungsten atoms in a hexagonally packed layer is 291 pm, the shortest distance between tungsten atoms in adjoining layers is 284 pm, and the tungsten carbon bond length is 220 pm. The tungsten-carbon bond length is therefore comparable to the single bond in W(CH3)6 (218 pm) in which there is strongly distorted trigonal prismatic coordination of tungsten.[21]
Molecular WC has been investigated and this gas phase species has a bond length of 171 pm for 184W12C.[22]
Applications
Cutting tools for machining
Sintered tungsten carbide cutting tools are very abrasion resistant and can also withstand higher temperatures than standard high speed steel tools. Carbide cutting surfaces are often used for machining through materials such as carbon steel or stainless steel, as well as in situations where other tools would wear away, such as high-quantity production runs. Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining. The material is usually called cemented carbide, hardmetal or tungsten-carbide cobalt: it is a metal matrix composite where tungsten carbide particles are the aggregate and metallic cobalt serves as the matrix. Manufacturers use tungsten carbide as the main material in some high-speed drill bits, as it can resist high temperatures and is extremely hard.[23][24]
Ammunition
Tungsten carbide is often used in armor-piercing ammunition, especially where depleted uranium is not available or is politically unacceptable. W2C projectiles were first used by German Luftwaffe tank-hunter squadrons in World War II. Owing to the limited German reserves of tungsten, W2C material was reserved for making machine tools and small numbers of projectiles. It is an effective penetrator due to its combination of great hardness and very high density.[25][26]
Tungsten carbide ammunition can be of the sabot type (a large arrow surrounded by a discarding push cylinder) or a subcaliber ammunition, where copper or other relatively soft material is used to encase the hard penetrating core, the two parts being separated only on impact. The latter is more common in small-caliber arms, while sabots are usually reserved for artillery use.[27][28]
Nuclear
Tungsten carbide is also an effective neutron reflector and as such was used during early investigations into nuclear chain reactions, particularly for weapons. A criticality accident occurred at Los Alamos National Laboratory on 21 August 1945 when Harry K. Daghlian, Jr. accidentally dropped a tungsten carbide brick onto a plutonium sphere, causing the subcritical mass to go supercritical with the reflected neutrons.
Sports
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ac/Nokian_Gazza_Extreme_294_29er.jpg/220px-Nokian_Gazza_Extreme_294_29er.jpg)
Hard carbides, especially tungsten carbide, are used by athletes, generally on poles that strike hard surfaces. Trekking poles, used by many hikers for balance and to reduce pressure on leg joints, generally use carbide tips in order to gain traction when placed on hard surfaces (like rock); carbide tips last much longer than other types of tip.[29]
While ski pole tips are generally not made of carbide, since they do not need to be especially hard even to break through layers of ice, rollerski tips usually are. Roller skiing emulates cross country skiing and is used by many skiers to train during warm weather months.
Sharpened carbide tipped spikes (known as studs) can be inserted into the drive tracks of snowmobiles. These studs enhance traction on icy surfaces. Longer v-shaped segments fit into grooved rods called wear rods under each snowmobile ski. The relatively sharp carbide edges enhance steering on harder icy surfaces. The carbide tips and segments reduce wear encountered when the snowmobile must cross roads and other abrasive surfaces.[30]
Some tire manufacturers offer bicycle tires with tungsten carbide studs for better traction on ice. These are generally preferred to steel studs because of their superior resistance to wear.[31]
Tungsten carbide may be used in farriery, the shoeing of horses, to improve traction on slippery surfaces such as roads or ice. Carbide-tipped hoof nails may be used to attach the shoes,[32] or alternatively borium, tungsten carbide in a matrix of softer metal, may be welded to small areas of the underside of the shoe before fitting.[33]
Surgical instruments
It is also used for making surgical instruments meant for open surgery (scissors, forceps, hemostats, blade-handles, etc.) and laparoscopic surgery (graspers, scissors/cutter, needle holder, cautery, etc.). They are much costlier than their stainless-steel counterparts and require delicate handling, but give better performance.[34]
Jewelry
Tungsten carbide, typically in the form of a cemented carbide (carbide particles held together by a metal), has become a popular material in the bridal jewelry industry due to its extreme hardness and high resistance to scratching. Even with high-impact resistance, this extreme hardness also means that it can occasionally be shattered under certain circumstances.[35] Tungsten carbide is roughly 10 times harder than 18k gold. In addition to its design and high polish, part of its attraction to consumers is its technical nature.[36]
Other
Tungsten carbide is sometimes used to make the rotating ball in the tips of ballpoint pens that disperse ink during writing.[37]
Tungsten carbide is a common material used in the manufacture of gauge blocks, used as a system for producing precision lengths in dimensional metrology. [citation needed]
English guitarist Martin Simpson is known to use a custom made tungsten carbide guitar slide.[38] The hardness, weight, and density of the slide give it superior sustain and volume compared to standard glass, steel, ceramic, or brass slides.
WC has been investigated for its potential use as a catalyst and it has been found to resemble platinum in its catalysis of the production of water from hydrogen and oxygen at room temperature, the reduction of tungsten trioxide by hydrogen in the presence of water, and the isomerisation of 2,2-dimethylpropane to 2-methylbutane.[39] It has been proposed as a replacement for the iridium catalyst in hydrazine powered satellite thrusters.[40]
Toxicity
The primary health risks associated with carbide relate to inhalation of dust, leading to fibrosis.[41] Cobalt–Tungsten Carbide is also reasonably anticipated to be a human carcinogen by the National Toxicology Program.[42]
References
- ^ a b c Krawitz, Aaron D.; Reichel, Daniel G.; Hitterman, Richard (1989). "Thermal Expansion of Tungsten Carbide at Low Temperature". Journal of the American Ceramic Society. 72 (3): 515. doi:10.1111/j.1151-2916.1989.tb06169.x.
- ^ a b Elastic Properties and Young Modulus for some Materials
- ^ a b c d e f Pierson, Hugh O. (1992). Handbook of Chemical Vapor Deposition (CVD): Principles, Technology, and Applications. William Andrew Inc. ISBN 0-8155-1300-3.
- ^ Lackner, A. and Filzwieser A. "Gas carburizing of tungsten carbide (WC) powder" U.S. patent 6,447,742 (2002)
- ^ Zhong, Y. (2011). "A study on the synthesis of nanostructured WC–10 wt% Co particles from WO3, Co3O4, and graphite". Journal of Materials Science. 46 (19): 6323. doi:10.1007/s10853-010-4937-y.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help); no-break space character in|title=
at position 49 (help) - ^ Jacobs, L. (1998). "Comparative study of WC-cermet coatings sprayed via the HVOF and the HVAF Process". Journal of Thermal Spray Technology. 7 (2): 213–218. doi:10.1361/105996398770350954.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Nerz, J. (1992). "Microstructural evaluation of tungsten carbide-cobalt coatings". Journal of Thermal Spray Technology. 1 (2): 147–152. doi:10.1007/BF02659015.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Noritaka Mizuno, Hitoshi Nakajima (1999). "Reaction of Metal, Carbide, and Nitride of Tungsten with Hydrogen Peroxide Characterized by 183W Nuclear Magnetic Resonance and Raman Spectroscopy". Chemistry of Materials. 11 (3): 691–697. doi:10.1021/cm980544o.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Pohanish, Richard P. (2012). Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens. Vol. Sixth Edition. Kidlington, UK: Elsevier, Inc. p. 2670. ISBN 978-1-4377-7869-4.
- ^ "Material: Tungsten Carbide (WC), bulk". MEMSnet. Retrieved 3 April 2013.
- ^ a b Roylance, David. "Material Properties" (PDF). Massachusetts Institute of Technology. Retrieved 4 April 2013.
- ^ CRC Materials Science and Engineering Handbook (2001).
- ^ Lalena, John N.; Cleary, David A. (2010). Principles of Inorganic Materials Design (Second ed.). Hoboken, New Jersey: John Wiley & Sons, Inc. p. 422. ISBN 978-0-470-40403-4.
- ^ CRC Materials Science and Engineering Handbook, p.405
- ^ "Velocity of Sound in Various Media". RF Cafe. Retrieved 4 April 2013.
- ^ Kittel, Charles (1995). Introduction to Solid State Physics (7 ed.). Wiley-India. ISBN 81-265-1045-5.
- ^ a b Ettmayer, Peter (1994). Carbides: transition metal solid state chemistry encyclopedia of inorganic chemistry. John Wiley & Sons. ISBN 0-471-93620-0.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ a b Wells, A. F. (1984). Structural Inorganic Chemistry (5 ed.). Oxford Science Publications. ISBN 0-19-855370-6.
- ^ Sara, R. V. (1965). "Phase Equilibria in the System Tungsten—Carbon". Journal of the American Ceramic Society. 48 (5): 251–257. doi:10.1111/j.1151-2916.1965.tb14731.x.
- ^ Rudy, E. (1962). "Untersuchungen im System Tantal-Wolfram-Kohlenstoff". Monatshefte für chemie. 93 (3): 1176–1195. doi:10.1007/BF01189609.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Kleinhenz, Sven (1998). "Preparation and Structures of [W(CH3)6], [Re(CH3)6], [Nb(CH3)6]-, and [Ta(CH3)6]-". Chemistry—A European Journal. 4 (9): 1687–91. doi:10.1002/(SICI)1521-3765(19980904)4:9<1687::AID-CHEM1687>3.0.CO;2-R.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Sickafoose, S.M. (2002). "Optical spectroscopy of tungsten carbide (WC)". J. Chem. Phys. 116 (3): 993. doi:10.1063/1.1427068.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Rao (2009). Manufacturing Technology Vol-Ii 2E. Tata McGraw-Hill Education. pp. 30–. ISBN 978-0-07-008769-9.
- ^ Davis, Joseph R., ASM International. Handbook Committee (1995). Tool materials. ASM International. pp. 289–. ISBN 978-0-87170-545-7.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ Ford, Roger (2000). Germany's Secret Weapons in World War II. Zenith Imprint. pp. 125–. ISBN 978-0-7603-0847-9.
- ^ Zaloga, Steven J. (2005). US Tank and Tank Destroyer Battalions in the ETO 1944–45. Osprey Publishing. pp. 37–. ISBN 978-1-84176-798-7.
- ^ Green, Michael and Stewart, Greg (2005). M1 Abrams at War. Zenith Imprint. pp. 66–. ISBN 978-0-7603-2153-9.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ Tucker, Spencer (2004). Tanks: an illustrated history of their impact. ABC-CLIO. pp. 348–. ISBN 978-1-57607-995-9.
- ^ Connally, Craig (2004). The mountaineering handbook: modern tools and techniques that will take you to the top. McGraw-Hill Professional. pp. 14–. ISBN 978-0-07-143010-4.
- ^ Hermance, Richard (2006). Snowmobile and ATV accident investigation and reconstruction. Lawyers & Judges Publishing Company. pp. 13–. ISBN 978-0-913875-02-5.
- ^ Hamp, Ron; Gorr, Eric and Cameron, Kevin (2011). Four-Stroke Motocross and Off-Road Performance Handbook. MotorBooks International. pp. 69–. ISBN 978-0-7603-4000-4.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ "Road nail". Mustad Hoof Nails. Retrieved July 2011.
{{cite web}}
: Check date values in:|accessdate=
(help) - ^ Breningstall, F. Thomas. "Winter shoes". Windt im Wald Farm. Retrieved July 2011.
{{cite web}}
: Check date values in:|accessdate=
(help) - ^ Reichert, Marimargaret and Young, Jack H. (1997). Sterilization technology for the health care facility. Jones & Bartlett Learning. pp. 30–. ISBN 978-0-8342-0838-4.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ Breaking Tungsten Carbide. cherylkremkow.com (2009-10-29)
- ^ Tungsten Carbide Manufacturing. forevermetals.com (2005-06-18)
- ^ "How does a ballpoint pen work?". Engineering. HowStuffWorks. 1998–2007. Retrieved 16 November 2007.
{{cite web}}
: CS1 maint: date format (link) - ^ "Wolfram Martin Simpson Signature Slide". Wolfram Slides. Retrieved 6 August 2013.
- ^ Levy, R. B. (1973). "Platinum-Like Behavior of Tungsten Carbide in Surface Catalysis". Science. 181 (4099): 547–549. doi:10.1126/science.181.4099.547. PMID 17777803.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Rodrigues, J.A.J. (1997). "Nitride and carbide of molybdenum and tungsten as substitutes of iridium for the catalysts used for space communication". Catalysis Letters. 45: 1–2. doi:10.1023/A:1019059410876.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help)CS1 maint: extra punctuation (link) - ^ Sprince, NL.; Chamberlin, RI.; Hales, CA.; Weber, AL.; Kazemi, H. (1984). "Respiratory disease in tungsten carbide production workers". Chest. 86 (4): 549–57. doi:10.1378/chest.86.4.549. PMID 6434250.
{{cite journal}}
: Unknown parameter|month=
ignored (help) - ^ "12th Report on Carcinogens". National Toxicology Program. Retrieved 24 June 2011.
External links