Jump to content

South African type SH tender

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andy Dingley (talk | contribs) at 14:05, 3 March 2018 (removed Category:Steam locomotive tenders; added Category:Steam locomotive tenders of South Africa using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

South African type SH tender
Type SH tender on NGR Class B of 1904
Type and origin
LocomotiveNGR Class A of 1905
NGR Class B of 1904
NGR Class B of 1906
DesignerNatal Government Railways
(D.A. Hendrie)
BuilderNorth British Locomotive Company
In service1904-1905
RebuilderSouth African Railways
Rebuild datec. 1925
Rebuilt toType SK
Specifications
Configuration2-axle bogies
Gauge3 ft 6 in (1,067 mm) Cape gauge
Length22 ft 9+316 in (6,939 mm)
Wheel dia.30 in (762 mm)
Wheelbase15 ft 6 in (4,724 mm)
 • Bogie4 ft 6 in (1,372 mm)
Axle load9 LT 10 cwt 2 qtr (9,678 kg)
 • Front bogie18 LT 18 cwt (19,200 kg)
 • Rear bogie19 LT 1 cwt (19,360 kg)
Weight empty39,318 lb (17,834 kg)
Weight w/o37 LT 19 cwt (38,560 kg)
Fuel typeCoal
Fuel cap.6 LT (6.1 t)
Water cap.3,225 imp gal (14,700 L)
StokingManual
CouplersDrawbar & Johnston link-and-pin
Drawbar & AAR knuckle (1930s)
Career
OperatorsNatal Government Railways
South African Railways
NumbersSAR 762-763, 1245-1288, 1440-1445

The South African type SH tender was a steam locomotive tender from the pre-Union era in the Natal Colony.

The Type SH tender first entered service in 1904, as tenders to the Class B 4-8-0 Mastodon type steam locomotives which were acquired by the Natal Government Railways in that year. These locomotives were designated Class 1 on the South African Railways in 1912.[1][2][3]

Manufacturer

Type SH tenders were built in 1904 by the North British Locomotive Company.[1]

The Natal Government Railways (NGR) placed fifty Class B Mastodon type locomotives in service in 1904. The locomotive and tender were designed by NGR Locomotive Superintendent D.A. Hendrie. Known as the Hendrie B, the first tender locomotive to enter service on the NGR in quantity, it replaced the NGR's fleet of tank locomotives on mainline working. The Type SH tender first entered service as tenders to these locomotives.[1][2][3]

In 1906, six of the Hendrie B engines were modified to a 4-8-2 Mountain type wheel arrangement.[1]

Characteristics

As built, the tender had a coal capacity of 6 long tons (6.1 tonnes) and a water capacity of 3,225 imperial gallons (14,700 litres), with a maximum axle load of 9 long tons 10 hundredweight 2 quarters (9,678 kilograms).[1][4][2][3]

Locomotives

Apart from those delivered with the Class B Mastodon type locomotives, more Type SH tenders entered service in 1905 as tenders to the NGR Class A Pacific type locomotive, or Hendrie A.[1][2][3][4]

In the South African Railways (SAR) years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and often also the tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[3][5]

The SAR grouped and renumbered the Hendrie A and Hendrie B locomotives into three separate Classes, according to wheel arrangement. Bearing in mind that tenders could and did migrate between engines, the Type SH tenders should have been numbered in the number ranges as shown.[1][2][3][5]

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "S_" tenders could only be used with the three locomotive classes with which they had been delivered.[1][3]

The second letter indicates the tender's water capacity. The "_H" tenders had a capacity of 3,225 imperial gallons (14,700 litres; 3,870 US gallons).[3]

Modifications and rebuilding

Modifications

The original slatted upper sides of the Type SH tender's coal bunker were soon replaced by sheet-metal sides. The sheet-metal tops appear to have not been uniform in dimensions, with some extending further towards the rear end of the tender than others.

Rebuilding to Type SK

From c. 1925, several of the Type SH tenders were completely rebuilt by the SAR by mounting a new upper structure on the existing underframe, with larger water tanks and a larger coal capacity. These rebuilt tenders had a more modern appearance, with smooth sides all the way to the top of the coal bunker. They were designated Type SK.[2][3][6]

The program to rebuild several older tender types with new upper structures was begun by Col F.R. Collins DSO, who approved several of the detailed drawings for the work during his term in office as Chief Mechanical Engineer of the SAR from 1922 to 1929. It was continued by his successor, A.G. Watson.[6]

Illustration

References

  1. ^ a b c d e f g h Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 99–101. ISBN 978-0-7153-5382-0.
  2. ^ a b c d e f South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  3. ^ a b c d e f g h i South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 43.
  4. ^ a b Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 51–52. ISBN 0869772112.
  5. ^ a b Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  6. ^ a b SAR Mechanical Department. New Tender Tank - Classes 1, 1A, 2, 2C, 3, 3B. SAR Mechanical Department Drawing Office, Drawing L-6512/1, c. 1926.