Jump to content

Lithium tantalate

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DePiep (talk | contribs) at 00:16, 2 November 2015 (Chembox: unknown parameters: fix spelling, replace or remove. See also full parameter list (via AWB script)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lithium tantalate
Names
IUPAC name
Lithium tantalate
Other names
Lithium Metatantalate
Identifiers
ECHA InfoCard 100.031.584 Edit this at Wikidata
RTECS number
  • WW55470000
Properties
LiTaO3
Molar mass 235.887 g/mol
Density 7.46 g/cm3, solid
Melting point 1,650 °C (3,000 °F; 1,920 K)
?/100 ml (25 °C)
Structure
Space group R3c
Related compounds
Other anions
LiNbO3
Supplementary data page
Lithium tantalate (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Lithium tantalate (LiTaO3), is a crystalline solid which possesses unique optical, piezoelectric and pyroelectric properties which make it valuable for nonlinear optics, passive infrared sensors such as motion detectors, terahertz generation and detection, surface acoustic wave applications, cell phones and possibly pyroelectric nuclear fusion. Considerable information is available from commercial sources about this salt.

Pyroelectric fusion

According to an April 2005 Nature article, Brian Naranjo, Jim Gimzewski and Seth Putterman at UCLA applied a large temperature difference to a lithium tantalate crystal producing a large enough charge to generate and accelerate a beam of deuterium nuclei into a deuteriated target resulting in the production of a small flux of helium-3 and neutrons through nuclear fusion without extreme heat or pressure. Their results have been replicated.[1]

It is unlikely to be useful for electricity generation since the energy required to produce the fusion reactions exceeded the energy produced by them. It is thought that the technique might be useful for small neutron generators, especially if the deuterium beam is replaced by a tritium one. Comparing this with the electrostatic containment of ionic plasma to achieve fusion in a "fusor" or other IEC, this method focuses electrical acceleration to a much smaller non-ionized deuterium target without heat.

Water and freezing

A scientific paper published in February 2010 shows a difference in the temperature and mechanism of freezing water to ice, depending on the charge applied to a surface of pyroelectric LiTaO3 crystals.[2]

References

  1. ^ B. Naranjo, J.K. Gimzewski and S. Putterman (2005). "Observation of nuclear fusion driven by a pyroelectric crystal". Nature. 434 (7037): 1115–1117. doi:10.1038/nature03575. PMID 15858570.
  2. ^ D. Ehre, E. Lavert, M. Lahav, I. Lubomirsky (2010). "Water Freezes Differently on Positively and Negatively Charged Surfaces of Pyroelectric Materials". Science. 327 (5966): 672–675. doi:10.1126/science.1178085.{{cite journal}}: CS1 maint: multiple names: authors list (link)

Further reading